This paper aims to evaluate the life cycle greenhouse gas (GHG) emissions of importing electrical power into Singapore, generated from a large-scale solar photovoltaic (PV) power plant in Australia, through a long-distance subsea high-voltage direct current (HVDC) cable. A cost optimization model was developed to estimate the capacities of the system components. A comprehensive life cycle assessment model was built to estimate emissions of manufacturing and use of these components. Our evaluation shows that, for covering one fifth of Singapore’s electrical energy needs, a system with an installed capacity of 13GWPV, 17 GWh battery storage and 3.2GW subsea cable is required. The life cycle GHG emissions of such a system are estimated to be 110gCO2eq/kWh, with the majority coming from the manufacturing of solar PV panels. Cable manufacturing does not contribute largely toward GHG emissions. By varying full-load hours and cable lengths, it was assessed that sites closer to Singapore might... [more]

Geothermal heat pumps have a widespread diffusion as they are able to deliver relatively higher energy output than other systems for building air-conditioning. The exploitation of low-enthalpy geothermal energy, however, presents crucial sustainability issues. This review investigates the primary forms of the environmental impact of geothermal heat pumps and the strategies for their mitigation. As life-cycle analyses shows that the highest impacts arise from installation and operation stages, most optimization studies focus on system thermodynamics, aiming at maximizing the energy performance via the optimization in the design of the different components interacting with the ground and serviced building. There are environmental studies of great relevance that investigate how the climate and ground properties affect the system sustainability and map the most suitable location for geothermal exploitation. Based on this review, ground-source heat pumps are a promising technology for the d... [more]

This paper deals with the applicability of alternative power system configurations to reduce the environmental footprint of inland waterway ships. Its original contribution includes: models for assessment of the lifetime emissions and associated lifetime costs of alternative power system configurations for different types of inland waterway vessels, identification of the most cost-effective options for these vessels, and an estimation of the impact of emission policies on the profitability of each option. The case study considers the Croatian inland waterway sector, where three types of vessel with significantly different purposes, designs, and operative profiles are considered (cargo ship, passenger ship, and dredger). The technical and operational features of these ships are analyzed with an emphasis on their energy needs. Then, life-cycle assessments (LCAs) of a diesel engine-powered ship configuration and two battery-powered ship configurations (with and without a photovoltaic syst... [more]

Disposal of municipal solid wastes (MSW) remains a challenge to minimize its impacts on the environment and human health. Landfilling, currently the most common method used for MSW disposal, occupies land space and leads to soil and air emissions. Gasification, an alternative MSW disposal method, can convert waste to energy, but can also lead to soil and air emissions and is a more extensive operation. In this study, life cycle assessments (LCA) of the two disposal methods (landfilling without energy recovery and gasification) were compared to understand impacts on environment and health. The LCA was conducted following the ISO 14040 standards with one ton of MSW as the functional unit. The life cycle inventory was obtained from published journals, technical reports, LandGEM, HELP and GREET database. The impact assessment was done using TRACI 2.1 and categorized into eight groups. The LCA revealed that landfilling is a higher contributor in global warming, acidification, smog formation... [more]

Modern building materials must fulfill not only functional performance criteria but also reduce the environmental impact accompanied by their production. Within the past decades, fiber-reinforced materials have been found to be promising and durable materials that can be utilized in various fields. Among a wide range of reinforcement types, basalt fibers have been introduced as an alternative to broadly used steel fibers. As informed by the available literature, benefits linked with less energy-intensive production indicate a very good potential application of this material in terms of functional properties and, at the same time, a reduction in environmental burden. However, only a very limited amount of information is available on the actual impact of using basalt fibers in terms of environmental impact. In order to fill this gap, the present study describes, using Life Cycle Assessment, the environmental impacts associated with the production of basalt fibers. In order provide a more... [more]

One way to reduce CO2 emissions is to replace conventional energy sources with renewable ones. In order to encourage prosumers to invest in renewable energy, EU Member States are developing renewable energy subsidy programs. In Poland, in the years 2019−2020, the “My Electricity” program was implemented, co-financing was up to 50% of eligible costs (max PLN 5000, i.e., EUR 1111), and the total cost of the program was 251 million euro. During this period, around 400,000 prosumer installations were created in Poland, including over 220,000 prosumer PV Installations under the My Electricity program. The total power of the installation under the “My Electricity” program was 1.295 GWp with an average installation power of 5.72 kWp. It is estimated that the micro-installations will produce approx. 1.4 TWh of electricity annually. Depending on the replaced source of electricity (coal, gas, mix), in the next 30 years, it will help to avoid 26.2−42.7 million Mg of greenhouse gases calculated as... [more]

The environmental performance of a combined cooling, heating, and power system is analyzed in this study at a component-level using a SPECO-based exergoenvironmental analysis. The engine consumes natural gas and produces 168.6 kW net power. The waste heat is recovered by a LiBr-H2O absorption chiller and a heat exchanger, which are used for cooling and heating purposes. The energy system is assisted by a solar field. An environmental Life Cycle Assessment quantifies the environmental impacts of the system, and these data are combined with exergy evaluations. The highest total environmental impact rate, 23,740.16 mPt/h, is related to the internal combustion engine, of which pollutant formation is the primary source of environmental impact. Compared with a non-renewable energy system, the solar-assisted trigeneration system decreased the environmental impact per exergy unit of chilled water by 10.99%. Exergoenvironmental performance can be further improved by enhancing the exergy efficie... [more]

Manufacturing offers substantial opportunities for economic growth after COVID-19, as long as it delivers competitively priced goods while simultaneously reducing pressure on the environment. In this study, we present the methodological feasibility of the joint application of life cycle assessment (LCA) and data envelopment analysis (DEA) for assessing eco-efficiency at the sector level. We employ this methodology to assess the environmental profiles of manufacturing in Poland in relation to their gross value added, and subsequently calculate the improvement targets for the eco-inefficient manufacturing industries. The study reveals that only the chemical industry is relatively eco-efficient, whereas the remaining industries have considerable room for improvement due to their very low eco-efficiency, and thus should follow the best practices established by the chemical industry. Although there are always individual paths for manufacturing industries to achieve the decoupling of economi... [more]

As a clean form of energy utilization, wind power is important for alleviating climate change. Although no direct carbon emissions occur in wind power generation, there exist upstream carbon emissions from manufacturing and installation, which have indirect effects on both the locations of wind farms and areas involved in upstream production and manufacturing. In this paper, based on Input−Output based Life Cycle Analysis (IO-LCA), we explored the lifetime carbon emissions of 378 wind farms in China that were still in operation in 2015. The regional distributions of carbon emissions from wind farms during the whole lifetime were depicted. The embodied carbon emission transfers from the location of the wind farm operation to upstream turbine manufacturing regions were traced. The net emission reduction benefits among regions were also calculated. Results show that carbon emissions mainly distribute in Liaoning, Inner Mongolia, and Tianjin in the turbine manufacturing stage, with a total... [more]

Buildings are responsible for approximately 30−40% of energy consumption in Europe, and this is a fact. Along with this fact is also evident the existence of a defined and strict legislation framework regarding energy efficiency, decarbonization, sustainability, and renewable energy systems in building applications. Moreover, information and communication technologies, along with smart metering for efficient monitoring, has come to cooperate with a building’s systems (smart buildings) to aim for more advanced and efficient energy management. Furthermore, the well-being in buildings still remains a crucial issue, especially nowadays that health and air quality are top priority goals for occupants. Taking all the above into consideration, this paper aims to analyze ventilation technologies in relation to energy consumption and environmental impact assessment using the life cycle approach. Based on the review analysis of the existing ventilation technologies, the emphasis is given to para... [more]

In the European Union, the building sector accounts for more than 40% of final energy consumption, contributing to the deterioration of the quality of the environment. Among the various solutions that aim to reduce the negative environmental impact caused by the operation of buildings, solar hot water systems (SHW) are popular. The choice of a SHW system is associated with the comfort of use and the access to low-cost energy. The design guidelines include the technical parameters for system operation such as materials, dimensions, sizing and operation temperatures. However, the legitimacy of choosing a particular solution and the available technical parameters are key issues. In the presented study, a multi-criteria analysis was proposed as a basis for the proper selection of system parameters, e.g., collector type, solar tank volume. A model of the SHW system was used to calculate the possible solutions, ensuring the same comfort of usage for several design options. The analyzed model... [more]

The potential of bio-electro-jet fuel (BEJF) production with integration into an existing biomass-based combined heat and power (CHP) facility was investigated. The BEJF is produced via Fischer−Tropsch (F−T) synthesis from biogenic CO2 and H2 obtained by water electrolysis. Techno-economic (TEA)- and life. cycle (LCA)- assessments were performed to evaluate the production cost and environmental impact of the BEJF production route. The BEJF mass fraction reached 40% of the total F−T crude produced. A reduction of 78% in heating demands was achieved through energy integration, leading to an increase in the thermal efficiency by up to 39%, based on the F−T crude. The total production cost of BEJF was in the range of EUR 1.6−2.5/liter (EUR 169−250/MWh). The GWP of the BEJF was estimated to be 19 g CO2-eq per MJ BEJF. The reduction potential in GWP in contrast to the fossil jet baseline fuel varied from 44% to more than 86%. The findings of this study underline the potential of BEJF as a re... [more]

The current work investigates the feasibility of a novel Carbon Capture and Utilization (CCU) approach—also known as Underground Sun Conversion (USC) or geo-methanation. The overall objective of the current work is a comprehensive assessment on the technical, economic and legal aspects as well as greenhouse gas impacts to be concerned for establishing USC technology concept. This is achieved by applying multidisciplinary research approach combining process simulation, techno-economic and greenhouse gas assessment as well as legal analysis allows answering questions about technical, economic feasibility and greenhouse gas performance as well as on legal constraints related to large scale CCU using geo-methanation in depleted hydrocarbon reservoirs. CO2 from the industry and renewable H2 from the electrolyser are converted to geomethane in an underground gas storage and used in industry again to close the carbon cycle. Process simulation results showed the conversion rates vary due to op... [more]

Renewable energy communities (RECs) are alternatives toward sustainable production and consumption pathways. In 2020, Italy implemented the EU Directive 2018/2001, defining a common framework for promoting energy from renewable sources. The “Famiglia di Maria”, a foundation dealing with social issues in San Giovanni a Teduccio, Napoli (Italy), in collaboration with “Legambiente” and “Con il Sud” Foundations, released the first Solidarity Oriented Renewable Energy Community project in Italy. Therefore, by applying social life cycle assessment (s-LCA) and life cycle assessment (LCA) methodologies, this study aims to: (i) promote the dissemination of RECs in the Italian and European contexts, (ii) suggest REC scenarios for the best social and environmental solutions, and (iii) support the policymakers for sustainable local development. Some key results show that the solidarity-oriented project has already produced mature outcomes about community cohesion. In contrast, technical skills and... [more]

To solve the challenge of decarbonizing the transport sector, a broad variety of alternative fuels based on different concepts, including Power-to-Gas and Power-to-Liquid, and propulsion systems, have been developed. The current research landscape is investigating either a selection of fuel options or a selection of criteria, a comprehensive overview is missing so far. This study aims to close this gap by providing a holistic analysis of existing fuel and drivetrain options, spanning production to utilization. For this purpose, a case study for Germany is performed considering different vehicle classes in road, rail, inland waterway, and air transport. The evaluated criteria on the production side include technical maturity, costs, as well as environmental impacts, whereas, on the utilization side, possible blending with existing fossil fuels and the satisfaction of the required mission ranges are evaluated. Overall, the fuels and propulsion systems, Methanol-to-Gasoline, Fischer−Trops... [more]

Globally, around half a million tonnes of spent nuclear fuel (SNF) will be in dry or wet storage by around 2050. Continued storage is not sustainable, and this SNF must eventually either be disposed (the open nuclear fuel cycle) or recycled (the closed fuel cycle). Many international studies have addressed the advantages and disadvantages of these options. To inform this debate, a detailed survey of the available literature related to environmental assessments of closed and open cycles has been undertaken. Environmental impacts are one of the three pillars that, alongside economic and societal impacts, must be considered for sustainable development. The aims are to provide a critical review of the open literature in order to determine what generic conclusions can be drawn from the broad base of international studies. This review covers the results of life cycle assessments and studies on waste arisings, showing how the management of spent fuels in the open and closed cycles impact the... [more]

The growth in the number of vehicles circulating has led to a proportional increase in polluting gas emissions. Bioenergy can be used to help meet these increasing energy demands and mitigate environmental impacts. This work verified the effect of the content of ethanol on the exergy and exergoenvironmental analyses of a spark-ignition engine. Different gasoline−ethanol mixtures were tested along with hydrous ethanol (4.6% water by volume). The thermodynamic data refer to wide-open throttle conditions and variable engine speeds. The life cycle assessment methodology quantified the environmental impacts associated with equipment and fuel using the Eco-indicator 99 method. Pollutants emitted during combustion were measured and included in the environmental assessment (nitrogen oxides, carbon monoxide, and dioxide). Hydrous ethanol at 1500 rpm presented the highest energy efficiency. The effects of the environmental impact rate of pollutant formation and exergy efficiency were significant... [more]

Solar energy is in high demand due to its environmental benefits and economic potential; however, concerns remain about the total impact it holds. In 2020, for Spain, Castilla-La Mancha was the second autonomous community with the highest photovoltaic energy production. Thus, a systematic review on 15 large-scale PV solar energy projects was carried out to assess the industry impacts, through environmental impact assessment (EIA), within the Autonomous Community of Castilla—La Mancha. An estimation of these impacts from a pre-operational approach is presented, based on primary energy needs and emissions discarded during its life cycle due to the manufacture, operation, and recycling of the photovoltaic modules. Based on both the life cycle assessment (LCA) and EIA, the approaches were compared with the results obtained. The obtained results suggest that determining the actual impacts of power plants in this region could provide justified information for the public administration and te... [more]

Synthetic Natural Gas (SNG) is the most researched option for a Power-to-Fuel pathway in Germany after hydrogen, having the advantage of being compatible with the existing infrastructure. However, it is not clear under which conditions SNG is economically and environmentally advantageous compared to natural gas usage, since this is determined by a complex interplay of many factors. This study analyzes the technical, economic and environmental aspects of a pilot SNG plant to determine the key parameters for profitable and sustainable operation. The SNG plant was simulated in Aspen Plus® with CO2 from biogas production as a feedstock and with hydrogen provided by a 1 MWel electrolyzer unit. A life cycle analysis (LCA) was undertaken considering several impact categories with a special focus on global warming potential (GWP). An SNG cost of 0.33−4.22 €/kWhth was calculated, depending on factors such as operational hours, electricity price and type of electrolyzer. It was found that the CO... [more]

Dairy farms are challenged to increase productivity while achieving environmental sustainability, where greenhouse gas (GHG) emissions are at the center of the discussion. The U.S. dairy industry leadership has committed to a Net Zero Initiative to achieve GHG neutrality, but the specifics on how to achieve this are still uncertain. Life cycle assessment methods were used to quantify GHGs and net energy intensity (NEI) of a large (1000 cows) and a small (150 cows) farm in Wisconsin. The GHGs are 1.0 and 1.3 kg CO2-eq/kg FPCM and the NEI is 2.4 and 3.2 MJ/kg FPCM for the large and small farm, respectively. The GHG benefits from anaerobic digestion (AD, sized to process all manure on both farms) and PV (sized to match AD electricity production) are not enough to achieve GHG neutrality. Increasing the capacity of these systems showed that AD is more cost-effective for the larger farm, but the challenges and costs related to securing and disposing the extra manure needed for energy product... [more]

The cement industry confronts significant challenges in raw materials, energy demands, and CO2 emissions reduction, which are global and local environmental concerns. Life cycle assessment (LCA) has been used in many studies to assess the environmental impact of cement production and investigate ways to improve environmental performance. This study aims to analyse the environmental impact of Portland cement (CEM I) on the South African cement industry using the life cycle impact assessment (LCIA), based on the Recipe 2016 v 1.04 midpoint method. The study was conducted using data modeled after the South African cement plant, considered a cradle-to-gate system boundary, starting from the extraction of the raw material to the cement production process that produces cement as the main product. The data were obtained from the Ecoinvent database v3.7.1, integrated with SimaPro 9.1.1. software, used to assess the impact categories. For simplicity, the study merged the entire production proce... [more]

Plug-in hybrid electric vehicles (PHEVs) are commonly operated with high-voltage (HV) components due to their higher power availability compared to 48 V-systems. On the contrary, HV-powertrain components are more expensive and require additional safety measures. Additionally, the HV system can only be repaired and maintained with special equipment and protective gear, which is not available in all workshops. PHEVs based on a 48 V-system level can offer a reasonable compromise between the greenhouse gas (GHG) emission-saving potential and cost-effectiveness in small- and medium-sized electrified vehicles. In our study, the lifecycle emissions of the proposed 48 V PHEV system were compared to a conventional vehicle, 48 V HEV, and HV PHEV for individual driving use cases. To ensure a holistic evaluation, the analysis was based on measured real-driving cycles including Global Position System (GPS) map-matched slope profiles for a parallel hybrid. Optimal PHEV battery capacities were derive... [more]

This article aims to present an evaluation of the environmental performance of a combustion polygeneration plant fed with lignocellulosic material from cardoon (Cynara cardunculus L.) through the technique of Life Cycle Assessment (LCA). The system boundaries encompassed macro-phases of crop production, transportation, and polygeneration processes that were able to produce 100 kW of electricity, a residual thermal energy recovery system and district heating and cooling with 270 kW of heating, and a 140 kW of cooling. The LCA was performed using Cumulative Energy Demand and ReCiPe Life Cycle Impact Assessment methods through midpoint and endpoint indicators. From 2000 h/year, 165.92 GJ of electricity and 667.23 GJ of primary energy were consumed, and 32.82 tCO2eq were emitted. The rates of Greenhouse Gas (GHG) and energy demand per MJ produced were 0.08 MJSE/MJPD, 0.30 MJPE/MJPD, and 0.01 kgCO2eq/MJPD. According to the ReCiPe method, the impact categories with the highest impact loads w... [more]

Over the years, the innovation and development of electrical and electronic equipment have been on a steep rise. Millions of electronics are being sold or discarded every year in the form of waste. Sustainable IT (Green IT or Circular Computing) is one of the most environment-friendly methods of reusing discarded or waste user electronics. The remanufacturing of a computer refers to the disassembly, repair, and upgrade of the original computer to give it a new life, along with a warranty that is as good as a new product. The goal of this work includes studying and assessing the total environmental impact of refurbishing a computer using life cycle assessment (LCA) integrated with discrete event simulation (DES), to compare two business models: (1) a case of centralized remanufacturing where the plants are in the Middle East, which is the hub for receiving waste electronics and distributing remanufactured goods; (2) a case of decentralized remanufacturing where the plants are situated i... [more]

Fine and ultrafine grinding of limestone are frequently used in the pharmaceutical, chemical, construction, food, and cosmetic industries, however, research investigations have not yet been published on the combination of energy and life cycle modeling. Therefore, the first aim of this research work was the examination of main grinding parameters of the limestone particles to determine an empiric energy-model. Dry and wet grinding experiments have been carried out with a Bond mill and a laboratory stirred ball mill. During the grinding processes, the grinding time and the filling ratio have been adjusted. The second goal of this research assessed the resources, emissions and environmental impacts of wet laboratory grinding with the help of life cycle assessment (LCA). The life cycle assessment was completed by applying the GaBi 8.0 (version: 10.5) software and the CML method. As a result of research, the determination of an empiric energy-model allowed to develop an estimated particle... [more]