Simulation codes allow one to reduce the high conservativism in nuclear reactor design improving the reliability and sustainability associated with nuclear power. Full-core coupled reactor physics at the rod level are not provided by most simulation codes. This has led in the UK to the development of a multiscale and multiphysics software development focused on LWRS. In terms of the thermal hydraulics, simulation codes suitable for this multiscale and multiphysics software development include the subchannel code CTF and the thermal hydraulics module FLOCAL of the nodal code DYN3D. In this journal article, CTF and FLOCAL thermal hydraulics validations and verifications within the multiscale and multiphysics software development have been performed to evaluate the accuracy and methodology available to obtain thermal hydraulics at the rod level in both simulation codes. These validations and verifications have proved that CTF is a highly accurate subchannel code for thermal hydraulics. In... [more]

The prevailing need for a more sustainable management of natural resources depends not only on the decisions made by governments and the will of the population, but also on the knowledge of the role of energy in our society and the relevance of preserving natural resources. In this sense, critical work is being done to instill key concepts—such as the circular economy and sustainable energy—in higher education institutions. In this way, it is expected that future professionals and managers will be aware of the importance of energy optimization, and will learn a series of computational methods that can support the decision-making process. In the context of higher education, this paper reviews the main trends and challenges related to the concepts of circular economy and sustainable energy. Besides, we analyze the role of simulation and serious games as a learning tool for the aforementioned concepts. Finally, the paper provides insights and discusses open research opportunities regardin... [more]

High fidelity modelling for nuclear power plant analysis is becoming more common due to advances in modelling software and the availability of high-performance computers. However, to design, develop and regulate new light water nuclear reactors there are, up until now, limited requirements for high fidelity methods due to the already well-established computational methods already being widely accepted. This article explores the additional detail which can be obtained when using high fidelity methods through Monte Carlo/Sub-channel analysis compared to industrial methods of cross-section/nodal analysis using the Advanced Boiling Water Reactor as a case study. This case study was chosen due to the challenges in modelling two phase flow and the high levels of heterogeneity within the fuel assembly design. The article investigates how to implement such an approach, from a bottom-up procedure, by analysing each stage of the modelling process.

This paper describes a new modeling framework for microscopic to reservoir-scale simulations of hydraulic fracturing and production. The approach builds upon a fusion of two existing high-performance simulators for reservoir-scale behavior: the GEOS code for hydromechanical evolution during stimulation and the TOUGH+ code for multi-phase flow during production. The reservoir-scale simulations are informed by experimental and modeling studies at the laboratory scale to incorporate important micro-scale mechanical processes and chemical reactions occurring within the fractures, the shale matrix, and at the fracture-fluid interfaces. These processes include, among others, changes in stimulated fracture permeability as a result of proppant behavior rearrangement or embedment, or mineral scale precipitation within pores and microfractures, at µm to cm scales. In our new modeling framework, such micro-scale testing and modeling provides upscaled hydromechanical parameters for the reservoir s... [more]

BISON finite element method fuel performance simulations were conducted using an existing automated process that couples the Fuels Irradiation & Physics Database (FIPD) and the Integral Fast Reactor Materials Information System database by writing input files and comparing the BISON output to post-irradiation fuel pin profilometry measurements contained within the databases. The importance of this work is to demonstrate the ability to benchmark fuel performance metallic fuel models within BISON using Experimental Breeder Reactor-II fuel pin data for a number of similar pins, while building off previous modeling efforts. Changes to the generic BISON input file include implementing pin specific axial power and flux profiles, pin specific fluences, frictional contact, and irradiation-induced volumetric swelling models for cladding. A statistical analysis of irradiation-induced volumetric swelling models for HT9, D9, and SS316 was performed for experiments X421/X421A, X441/X441A, and X486.... [more]

Multiagent control system (MACS) has become a promising solution for solving complex control problems. Using the advantages of MACS-based design approaches, a novel solution for advanced control of mechatronic systems has been developed in this paper. The study has aimed at integrating learning control into MACS. Specifically, learning feedforward control (LFFC) is implemented as a pattern for incorporation in MACS. The major novelty of this work is that the feedback control part is realized in a real-time periodic MACS, while the LFFC algorithm is done on-line, asynchronously, and in a separate non-real-time aperiodic MACS. As a result, a MACS-based LFFC design method has been developed. A second-order B-spline neural network (BSN) is used as a function approximator for LFFC whose input-output mapping can be adapted during control and is intended to become equal to the inverse model of the plant. To provide real-time features for the MACS-based LFFC system, the open robot control soft... [more]

This article compares the brightness and uniformity perception of virtual corridor displayed on computer screens and under different surrounding conditions, between two groups of respondents. The computer simulations of 10 lighting scenarios in the empty corridor, diverse in terms of luminance distribution and lighting power density, were developed. The visual assessment of the lighting effects was carried out on the basis of surveys. The respondents assessed the brightness and uniformity of each plane and entire corridor for each scenario, using semantic differential scaling. Each person from the first group individually made their evaluations on the same computer screen placed in the experimental box. Each person from the second group made the assessments on different computer screens, and all respondents from this group made the evaluations in the computer room at the same time. A high convergence of the results between the groups was found in the assessments of brightness and unifo... [more]

The energy production of concentrated solar power (CSP) plants not only depends on their design, but also of the weather conditions and the way they are operated. A performance model (PM) of a CSP plant is an essential tool to determine production costs, to optimize design and also to supervise the operation of the plant. The challenge is developing a PM that is both easy enough to be useful during the earlier stages of the project, and also useful for supervision of plant operation. This requires one to be able to describe the step between the different modes of operation and to fit the response to transient meteorological phenomena, not so relevant in terms of aggregate values, but crucial for the supervision. The quasi-dynamic performance model (QD-PM) can predict the net energy exported to the grid, as well as all the key operational variables. The QD-PM was implemented using Matlab-Simulink of Mathwoks (MA, USA) with a modular structure. Each module is developed using specific sof... [more]

Innovative heating networks with a hybrid generation park can make an important contribution to the energy turnaround. By integrating heat from several heat generators and a high proportion of different renewable energies, they also have a high degree of flexibility. Optimizing the operation of such systems is a complex task due to the diversity of producers, the use of storage systems with stratified charging and continuous changes in system properties. Besides, it is necessary to consider conflicting economic and ecological targets. Operational optimization of district heating systems using nonlinear models is underrepresented in practice and science. Considering ecological and economic targets, the current work focuses on developing a procedure for an operational optimization, which ensures a continuous optimal operation of the heat and power generators of a local heating network. The approach presented uses machine learning methods, including Gaussian process regressions for a repe... [more]

The paper deals with nonlinear simulation models of a drive consisting of the four-phase 8/6 doubly salient switched reluctance motor (SRM), the four-phase dissymmetric bridge power converter and the closed-cycle rotor speed control strategy carried out by the pulse width modulation (PWM) with variable angle and combined control scheme with the PI algorithm. All presented considerations are based on a MATLAB-SIMULINK platform. The nonlinear mathematical model of the analyzed SRM drive was obtained as a combination of the two dimensional (2D) finite element model (FEM) of the motor and the nonlinear model of the electrical network of the power supply circuit. The main model and its seven sub-modules, such as the controller module, one phase simulation module, rotor position angle transformation module, power system module, phase current operation module, “subsystem” module, and electromagnetic torque of one phase operation module, are described. MATLAB functions store the magnetization... [more]

Humidity-sensitive, demand-controlled ventilation systems have been in use for many years in regions with oceanic climates. Some attempts have been made to apply this technology in Poland, which has a continental climate. This article evaluates the performance and energy consumption of such a system when applied in an eight-floor, multiunit, residential building, i.e., the virtual reference building described by the National Energy Conservation Agency (NAPE), Poland. Simulations using the computer program CONTAM were performed for the whole heating season based upon the climate in Warsaw. Besides passive stack ventilation, that served as a reference, two ventilation systems were studied: one standard and one “hybrid” system with additional roof fans. This study confirmed that the application of humidity-sensitive, demand-controlled ventilation in multiunit residential buildings in a continental climate (Dfb) led to significant energy savings (up to 11.64 kWh/m2 of primary energy). Howe... [more]

Modeling flow and transport in fractured porous media has been a topic of intensive research for a number of energy- and environment-related industries. The presence of multiscale fractures makes it an extremely challenging task to resolve accurately and efficiently the flow dynamics at both the local and global scales. To tackle this challenge, we developed a computational workflow that adopts a two-level hierarchical strategy based on fracture length partitioning. This was achieved by specifying a partition length to split the discrete fracture network (DFN) into small-scale fractures and large-scale fractures. Flow-based numerical upscaling was then employed to homogenize the small-scale fractures and the porous matrix into an equivalent/effective single medium, whereas the large-scale fractures were modeled explicitly. As the effective medium properties can be fully tensorial, the developed hierarchical framework constructed the discrete systems for the explicit fracture−matrix sub... [more]

This paper deals with in loop design of coupling elements of the wireless charging systems (WChS). The in-loop design is created as a script/User Interface (UI) in MATLAB environment, which is based on finite element models of WChS. Main aim of developed tool is to easily identify the optimal geometrical parameters of the coupling coils. The optimization of the coil’s geometrical and electrical parameters is specified by an algorithm, which is based on definition for transfer of required amount of power and on geometrical restrictions of the target application. The second part of the proposed script/UI is used for user guided design of the electromagnetic shielding. It enables to optimize the shielding parameters in order to reach the limits defined by international standards for safety levels with respect to human exposure. Proposed design methodology together with user interface have been verified though experimental validation. For this purpose, construction of WChS was realized bas... [more]

Buildings are among the main protagonists of the world’s growing energy consumption, employing up to 45%. Wide efforts have been directed to improve energy saving and reduce environmental impacts to attempt to address the objectives fixed by policymakers in the past years. Meanwhile, new approaches using Machine Learning regression models surged in the modeling and simulation research context. This research develops and proposes an innovative data-driven black box predictive model for estimating in a dynamic way the interior temperature of a building. Therefore, the rationale behind the approach has been chosen based on two steps. First, an investigation of the extant literature on the methods to be considered for tests has been conducted, shrinking the field of investigation to non-recursive multi-step approaches. Second, the results obtained on a pilot case using various Machine Learning regression models in the multi-step approach have been assessed, leading to the choice of the Sup... [more]

The fast pyrolysis of coffee ground for bio-crude oil production was simulated in a tilted-slide reactor. The biochemical composition was derived by an extended biomass characterization method based on the elemental analysis. The simulation was performed in a steady-state and a Lagrangian multiphase model was adopted to describe the transport of sand and biomass particles together with a multistep kinetic mechanism for fast pyrolysis. When the secondary tar cracking reactions were not considered the volatile yield increased monotonically with temperature. The inclusion of secondary reactions could improve the prediction of volatile yield which turn to decrease at higher temperature. It was found that not only the maximum volatile yield but also the corresponding reactor temperature agreed well with the experimental results. At the temperature higher than 550 °C the trend of volatile yield is similar to that of experiment while it is larger at lower reactor temperature. The individual s... [more]

Most large commercial vessels are propelled by low-speed two-stroke diesel engines due to their fuel economy and reliability. With increasing international concern about emissions and the rise in oil prices, improvements in engine efficiency are urgently needed. In the present work, a zero-dimensional model for a low-speed two-stroke diesel engine is developed that considers the exhaust gas bypass and geometry structures for the gas exchange model. The model was applied to a low-speed two-stroke 7G80 ME-C9 marine diesel engine and validated with engine shop test data, which consisted of the main engine performance parameters and cylinder pressure diagrams at different loads. The simulation results were in good agreement with the experimental data. Thus, the model has the ability to predict engine performance with good accuracy. After model validation, the variations in compression ratio, fuel injection timing, exhaust gas bypass valve opening portion, exhaust valve opening timing, and... [more]

A series of computational fluid dynamics−discrete element method (CFD-DEM) simulations were applied to seed flow in horizontal-vertical 90-degree elbows. The performance of one-way and two-way CFD-DEM coupling methods was compared. Additionally, simulated seed velocities were compared to the current pneumatic conveying theory for each coupling method. Simulated field peas (Pisum sativum) were pneumatically conveyed to study the effect of air velocity (20, 25, and 30 m/s), seed rate (0.07, 0.21, and 0.42 kg/s), elbow diameter, D, (48.3, 60.3, and 72.4 mm), and elbow bend radius (1.5D, 2.5D, 3.5D, and 4.5D) on seed attributes (trajectory, velocity, and force). Results showed that seed velocity was significantly different between one-way and two-way coupling. Both methods resulted in nearly identical seed trajectory and force. Overall, simulated seed velocities had a strong correlation to values calculated through the current pneumatic conveyance theory. Dimensional analysis revealed that... [more]

Gravure printing is widely used in food, pharmaceutical, and other packaging industries. As a green printing material, water-based ink has problems such as non-volatile and poor drying on non-absorbent packaging substrates, which has a great impact on its application. To solve these difficulties, this study adopts the volume of fluid (VOF) method and user-defined function (UDF) to establish a multiphase flow impinging air jets drying model of water-based ink in the gravure printing process, taking a water-based ink droplet as an example. The model was used to simulate the ink drying state in the impinging air jets region and analyze the effects of impinging air jets’ temperature and velocity, as well as ink viscosity and thickness, on the ink drying efficiency. Meanwhile, the heat and mass transfer mechanism between impinging air jets and water-based ink was investigated. The results show that the higher impinging air jet temperature and velocity, the faster the drying rate of the ink;... [more]

The article describes an elaboration of the X-in-the-loop (XiL) testing environment for a thermal management system (TMS) intended for the traction electric drive of an electric vehicle, which has each of its wheels driven by an in-wheel motor. The TMS features the individual thermal regulation of each electric drive using a hydraulic layout with parallel pipelines and electrohydraulic pumps embedded into them. The XiL system is intended as a tool for studying and developing the TMS design and controls. It consists of the virtual part and the physical part. The former simulates the vehicle operating in a driving cycle with the heat power dissipated by the electric drive components, which entails the change in their temperature regimes. The physical part includes the TMS itself consisting of a radiator, pipelines, and pumps. The physical part also features devices intended for simulation of the electric drive components in terms of their thermal and hydraulic behaviors, as well as devic... [more]

We examined the cost implications of selecting six different types of heat exchangers as the lean/rich heat exchanger in an amine-based CO2 capture process. The difference in total capital cost between different capture plant scenarios due to the different costs of the heat exchangers used as the lean/rich heat exchanger, in each case, is in millions of Euros. The gasketed-plate heat exchanger (G-PHE) saves significant space, and it saves considerable costs. Selecting the G-PHE instead of the shell and tube heat exchangers (STHXs) will save €33 million−€39 million in total capital cost (CAPEX), depending on the type of STHX. About €43 million and €2 million in total installed costs (CAPEX) can be saved if the G-PHE is selected instead of the finned double-pipe heat exchanger (FDP-HX) or welded-plate heat exchanger, respectively. The savings in total annual cost is also in millions of Euros/year. Capture costs of €5/tCO2−€6/tCO2 can be saved by replacing conventional STHXs with the G-PH... [more]

We propose a model for optimising driving speed profiles on metro lines to reduce traction energy consumption. The model optimises the cruising speed to be maintained on each section between two stations; the functions that link the cruising speed to the travel time on the section and the corresponding energy consumption are built using microscopic railway simulation software. In addition to formulating an optimisation model and its resolution through a gradient algorithm, the problem is also solved by using a simulation model and the corresponding optimisation module, with which stochastic factors may be included in the problem. The results are promising and show that traction energy savings of over 25% compared to non-optimised operations may be achieved.

Heat pumps (HPs) are being developed with a new emphasis on cold climates. To lower the environmental impact of greenhouse gas (GHG) emissions, alternate low global warming potential (GWP) refrigerants must also replace the exclusive use of the refrigerant R410A, preferably without re-engineering the mechanical hardware. In this paper, we analyze the performance of four low-GWP alternative refrigerants (R32, R452B, R454B, and R466A) relative to the conventional R410A and draw conclusions on the relative performances for providing heating in cold climates based on the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) 210/240 standard for two-speed heat pumps. The simulations are carried using the Department of Energy, Oak Ridge National Laboratory (DOE/ORNL) Heat Pump Design Model (HPDM), a well-known heating, ventilation, and air conditioning (HVAC) modeling and design tool in the public domain and the HVAC research and development community. The results of the simulation a... [more]

The demand for alternative sources of clean, sustainable, and renewable energy has been a focus of research around the world for the past few decades. Microbial/enzymatic biofuel cells are one of the popular technologies for generating electricity from organic substrates. Currently, one of the promising fuel options is based on glucose due to its multiple advantages: high energy intensity, environmental friendliness, low cost, etc. The effectiveness of biofuel cells is largely determined by the activity of biocatalytic systems applied to accelerate electrode reactions. For this work with aerobic granular sludge as a basis, a nitrogen-fixing community of microorganisms has been selected. The microorganisms were immobilized on a carbon material (graphite foam, carbon nanotubes). The bioanode was developed from a selected biological material. A membraneless biofuel cell glucose/oxygen, with abiotic metal catalysts and biocatalysts based on a microorganism community and enzymes, has been d... [more]

Proper busbar selection based on analytical calculations is of great importance in terms of power grid functioning and its safe usage. Experimental tests concerning busbars are very expensive and difficult to be executed. Therefore, the great advantage for setting the valid parameters for busbar systems components are analytical calculations supported by FEM (finite element method) modelling and analysis. Determining electrodynamic forces in busbar systems tends to be crucial with regard to subsidiary, dependent parameters. In this paper analytical calculations of asymmetric three-phase busbar system were carried out. Key parameters, like maximal electrodynamic forces value, mechanical strength value, busbar natural frequency, etc., were calculated. Calculations were conducted with an ANSYS model of a parallel asymmetric busbar system, which confirmed the obtained results. Moreover, showing that a model based on finite elements tends to be very helpful in the selection of unusually-sha... [more]

Grid-connected photovoltaic (PV) capacity is increasing and is currently estimated to account for 3.0% of worldwide energy generation. One strategy to balance fluctuating PV power is to incentivize self-consumption by shifting certain loads. The potential improvement in the amount of self-consumption is usually estimated using smart meter and PV production data. Smart meter data are usually available only at sampling frequences far below the Nyquist limit. In this paper we investigate how this insufficient sampling rate affects the estimated self-consumption potential of shiftable household appliances (washing machines, tumble dryers and dishwashers). We base our analyses on measured consumption data from 16 households in the UK and corresponding PV data. We found that the simulated results have a marked dependence on the data sampling rate. The amount of self-consumed energy estimated with data sampled every 10 min was overestimated by 30−40% compared to estimations using data with 1... [more]