One of the ways to sustain development is striving for energy efficiency. This is the purpose of directive 2012/27/EU on energy efficiency, which aims at explaining and promoting energy−saving and ecological solutions that allow increasing the output of consumed energy. Several years after implementation, it is possible to assess the directive’s usefulness and completeness in a few areas of the economy, in particular in the operation of enterprises, which substantially contribute to the global energy consumption. Therefore, the purpose of the study was defined as an assessment of the execution of the concept of energy efficiency in business operations in EU countries, in accordance with the assumptions of directive 2012/27/EU. The collected raw data were derived from surveys gathered in the process of public consultations of the European Commission regard directive 2012/27/EU on energy efficiency. Resulting observations were analysed using the basic methods of descriptive statistics, a... [more]

Energy efficiency (EE) and demand response (DR) resources provide important utility systems and ratepayer benefits. At the same time, the rapid change in the amount and type of variable renewable energy, like solar and wind, is reshaping the role and economic value of EE and DR, and will likely affect the time-dependent valuation of EE and DR measures. Utilities are increasingly interested in integrating EE and DR measures as a strategic approach to improve their collective cost-effectiveness and performance. We develop a framework to identify the EE and DR attributes, system conditions, and technological factors that are likely to drive interactions between EE and DR. We apply the framework to example measures with different technology specifics in the context of different utility system conditions. We find that EE and DR interactions are likely driven by changes in discretionary load, the addition of controls or other capabilities to shift loads, and the coincidence of savings with s... [more]

Sunlight is converted into electrical energy due to the photovoltaic effect in photovoltaic cells. Energy yield of photovoltaic systems depends on the solar array location, orientation, tilt, tracking and local weather conditions. In order to determine the amount of energy produced in a photovoltaic system, it is important to analyze the operation of the photovoltaic (PV) arrays in real operating conditions and take into account the impact of external factors such as irradiance, ambient temperature or the speed of blowing wind, which is the natural coolant of PV panels. The analysis was carried out based on mathematical models and actual measurement data, regarding the dependence of the average temperature of PV arrays on variable and difficult to predict ambient conditions. The analysis used standard (nominal operating cell temperature (NOCT)), King, Skoplaki, Faiman and Mattei thermal models and the standard model for flat-plate photovoltaic arrays. Photovoltaic installations PV1, PV... [more]

The integration of thermal energy storage systems (TES) in waste-heat recovery applications shows great potential for energy efficiency improvement. In this study, a 2D mathematical model is formulated to analyze the performance of a two-tank thermochemical heat storage system using metal hydrides pair (Mg2Ni/LaNi5), for high-temperature waste heat recovery. Moreover, the system integrates a phase change material (PCM) to store and restore the heat of reaction of LaNi5. The effects of key properties of the PCM on the dynamics of the heat storage system were analyzed. Then, the TES was optimized using a genetic algorithm-based multi-objective optimization tool (NSGA-II), to maximize the power density, the energy density and storage efficiency simultaneously. The results indicate that the melting point Tm and the effective thermal conductivity of the PCM greatly affect the energy storage density and power output. For the range of melting point Tm = 30−50 °C used in this study, it was sho... [more]

The dynamic growth in the use of cloud computing systems results in increasing energy consumption. Consequently, more and more attention is given to energy efficiency issues both in research and theory development as well as the business practice of cloud computing systems. In spite of the rapid development of research, the field has not been mapped from the bibliometric perspective yet. This study aims at publication profiling and mapping the thematic structure of the cloud computing energy efficiency research field. Detailed research objectives include: (1) profiling scientific publications in the field, (2) identifying and exploring thematic research areas, (3) identifying emerging topics and discussing their potential as future research lines. The aforementioned objectives are translated into the following study questions: (1) What are the most productive nations, institutions, source titles, and scholars contributing to research on energy efficiency in cloud computing? (2) What do... [more]

Non-orthogonal multiple access (NOMA) is a promising technology for next-generation wireless networks with emerging demands on low latency, high throughput, and massive connectivity. Unlike orthogonal multiple access, NOMA allows multiple users to share the same radio resources, which significantly improves spectral efficiency (SE). To achieve green wireless communications for numerous networked devices, NOMA helps reduce energy consumption while satisfying rate fairness and quality-of-experience requirements. The goal of this paper is to introduce the innovative approaches for NOMA in terms of the SE and energy efficiency, and discuss emerging technologies involved with NOMA. Further, its challenges and future research directions are highlighted.

Following a new climate and energy plan, the European Union (EU) gives big attention to energy savings. The overall assessment of energy saving measures is very important. Thus, it is crucial to estimate in a proper way the primary energy factor, which is used in calculations of primary energy consumption from renewable energy (RE) sources in a Nearly Zero Energy Building (NZEB). The conduced studies of the literature and national regulations showed that different methods to determine energy from photovoltaic (PV) systems are used. The aim of this paper is to evaluate the primary energy factors of energy from photovoltaics and determine the average value. To achieve this aim, the data of 30 photovoltaic systems from Lithuania were analyzed. The results show a 35% diversification in the values of non-renewable primary energy factor, depending on the PV systems’ capacities, with the average on a level of 1.038.

In recent times, the field of wireless sensor networks (WSNs) has attained a growing popularity in observing the environment due to its dynamic factors. Sensor data are gathered and forwarded to the base station (BS) through a wireless transmission medium. The data from the BS is further distributed to end-users using the Internet for their post analysis and operations. However, all sensors except the BS have limited constraints in terms of memory, energy and computational resources that degrade the network performance concerning the network lifetime and trustworthy routing. Therefore, improving energy efficiency with reliable and secure transmissions is a valuable debate among researchers for critical applications based on low-powered sensor nodes. In addition, security plays a significant cause to achieve responsible communications among sensors due to their unfixed and variable infrastructures. Keeping in view the above-mentioned issues, this paper presents an energy-aware graph clu... [more]

The empirical conclusions regarding the relationship between energy price and energy efficiency are relatively mixed. This paper systematically examines the influence of energy price on energy efficiency in China based on data from 30 provinces between 2003 and 2017, using linear and nonlinear effect analysis. We found that the impact of energy price on energy efficiency in China was positive in general. However, there existed heterogeneous effects of energy price on energy efficiency in various regions, and the effect differed with differences in energy efficiency levels based on the panel quantile regression analysis. Finally, the nonlinear effect analysis based on the panel threshold model indicated that the effect of energy price on energy efficiency increased with the rise of the environmental regulation level and economic growth rate, while it decreased with the ascent of the degree of energy price distortion and economic development level. In particular, when the value of a regi... [more]

Climate change and efforts to mitigate it have given rise to an interest in the relationship between industry competitiveness, energy efficiency, and carbon emissions. A better understanding of this relationship can be essential for economic and environmental decision-makers. This paper presents empirical research evaluating industry competitiveness through the factors of energy efficiency and carbon emission in Europe’s most energy-intensive industries. The designed industry competitiveness measure index consists of seven components, grouped into three equally weighted sub-indexes: export performance, energy, and environmental. The export performance of the industry is described by the industry export growth rate, the share of the industry’s export, and the effects on the industry’s competitiveness of changes in a country’s export. The energy intensity of the industry and energy prices are integrated into the energy sub-index. The environmental sub-index consists of the industry’s emi... [more]

Energy efficiency, generation from renewable sources and more recently energy flexibility are key elements of present sustainability policies. However, we are beginning to see a recognition of the need to couple technological solutions with lifestyle and behavioral changes, sometimes labeled under the term “sufficiency”. Appropriate policies and design principles are necessary to enable sufficiency options, which in turn reveal that there is a bidirectional influence between the building and the district/city level. In this context, the authors discuss how city and building re-design should be implemented combining energy efficiency, flexibility, production from renewables and sufficiency options for achieving a positive energy balance at the district level even within the constraints of dense cities. Based on a review of recent advances, the paper provides a matrix of interactions between building and district design for use by building designers and city planners. It also compares po... [more]

In order to fully understand the energy and exergy transfer processes in sinter vertical coolers, a simulation model of the fluid flow and heat transfer in a vertical cooler was established, and energy and exergy efficiency analyses of the gas−solid heat transfer in a vertical cooler were conducted in detail. Based on the calculation method of the whole working condition, the suitable operational parameters of the vertical cooler were obtained by setting the net exergy efficiency in the vertical cooler as the indicator function. The results show that both the quantity of sinter waste heat recovery (SWHR) and energy efficiency increased as the air flow rate (AFR) increased, and they decreased as the air inlet temperature (AIT) increased. The increase in the sinter inlet temperature (SIT) resulted in an increase in the quantity of SWHR and a decrease in energy efficiency. The air net exergy had the maximum value as the AFR increased, and it only increased monotonically as the SIT and AIT... [more]

Due to the need of good thermal performance, external wall insulation (EWI) is usually made of materials that are not fire resistant and sometimes flammable. That restricts its application to a particular circumstance such as limited building height. Hence, a material with good thermal insulation and fire resistance performance would allow EWI to be more widely applied. This paper introduces a novel material: a silica-based aerogel porous board, which differs itself from mainstream products available in the market because of its outstanding properties, such as low density, high surface area, low thermal conductivity and superhydrophobicity. Herein, its thermal insulation and fire-resistant performance were tested and compared with commercial products. The cone calorimeter analysis results indicated that the aerogel porous board could improve the fire resistance performance. Moreover, the evaluation of thermal insulation performance suggested that the application of an aerogel porous bo... [more]

The adoption of electric vehicles promises numerous benefits for modern society. At the same time, there remain significant hurdles to their wide distribution, primarily related to battery-based energy sources. This review concerns the systematization of knowledge in one of the areas of the electric vehicle control, namely, the energy management issues when using braking controllers. The braking process optimization is summarized from two aspects. First, the advantageous solutions are presented that were identified in the field of gradual and urgent braking. Second, several findings discovered in adjacent fields of automation are debated as prospects for their possible application in braking control. Following the specific classification of braking methods, a generalized braking system composition is offered, and all publications are evaluated primarily in terms of their energy recovery abilities as a global target. Then, conventional and intelligent classes of braking controllers are... [more]

Evidence collected by researchers over several decades suggests that the successful implementation of the Energy Efficiency Obligation Scheme (EEOS) may deliver significant, cost-effective energy savings over many years. However, before starting EEOS in Latvia, predictions by energy efficiency policy researchers envisaged that it is at high risk of savings shortfalls. This study aims to carry out an ex-post policy evaluation of EEOS in Latvia and assess its ability to deliver significant savings in the first phase of the new EEOS. This paper questions whether the new EEOS can reach savings goals without prior experience with voluntary agreement schemes and emulation of successful EEOS from other countries. The second goal of the research is to create a web-based optimization tool as an Interactive Learning Environment to help policymakers and EEOS-obliged parties to create goal-oriented strategies. The study has found that, contrary to expectations, Latvia has reached and even overfulf... [more]

The purpose of this study is to identify the most relevant renewable energy technologies for buildings and to assess the effectiveness of their implementation in the long term for Kuwait. Methods of analogies and comparisons were used to determine the features of energy efficiency based on the technologies under study. The study proposes the methodological approach to assessing the effectiveness of the introduction of renewable energy technologies, determining the direction of increasing the energy efficiency of buildings and the investment efficiency of introducing these technologies. Renewable energy efficiency analysis for buildings in Kuwait confirms that solar energy systems have been the most widely available for widespread use of solar energy over the past three years. An increasing level of energy efficiency with a decrease in the notional cost of increasing energy savings is characteristic of solar collectors with booster reflectors. The proposed model for assessing the level... [more]

This paper contains the basic definition and application of the physical optimum as a method for process evaluation and optimization. By means of the exemplary balance of a wood pellet-fired boiler, the conventional efficiency is compared to the PhO. Furthermore, this study demonstrates the possibility of applying the thermodynamic state variable exergy as a physical reference property of a system within the PhO method. To explain the approach, the heat generation in the wood pellet-fired boiler is compared to the supply from a heat pump, which itself is connected to a power plant. Furthermore, the process-independent PhO is explained in order to illustrate the limitations of feasible optimization. Additionally, possible research topics such as the integration of dynamic behavior in the method are approached. As a conclusion, the differences between the methods outline the advantage of the PhO in the optimization process.

The digitalization of the forest sector, the increased demand of energy-wood, as well as faster market changes have increased the number of challenges for wood procurement of the forest industry. The aim of the study is to optimize wood procurement (upstream of supply chain) of energy and material production in integrated situations, and to consider the effects of production changes on the management of procurement regions. Three scenarios described integrated production situations in a carbon-neutral forest industry: (1) declining export, (2) energy reform, and (3) extensive energy reform. Time-varying capital-, cost-, and energy efficiency of the dynamic wood-flow model affected the competitiveness of the procurement regions. As a novel contribution, energy efficiency was modeled using the price of emission allowance as a cost parameter. The results show the positive effects of the energy reforms, which partly compensate for the declining exports. In addition, it is possible to chang... [more]

In the Industrial Internet of Things (IIoT), non-orthogonal multiple access (NOMA) has emerged as a viable multiple access method due to its superior efficiency. In this paper, a new power allocation technique for NOMA-enabled IIoT devices is presented with trade-offs between increasing energy efficiency and decreasing power consumption. We present a joint optimization of transmission rate and energy harvesting in simultaneous wireless information and power transfer (SWIPT) NOMA-enabled IIoT devices. With the power splitting (PS) approach, we examine how to improve overall transmission rate and harvested energy, simultaneously, while fulfilling the minimum rate and harvested energy needs of each IIoT device in a SWIPT-enabled NOMA system. An objective function is established by adding transmission rates obtained from information decoding and the transformed throughput from energy harvesting. The combination of management approaches with Industry 4.0 technology provides a viable strateg... [more]

Small-scale combined heat and power (micro-CHP or mCHP) plants generate heat in the process of localised electricity production that can usefully be captured and employed for domestic space and water heating. Studies of the relative merits of three alternative network-connected mCHP plants are reviewed based respectively on an Internal Combustion engine (ICE), a Stirling engine (SE), and a Fuel Cell (FC). Each plant will, in most cases, result in lower carbon dioxide (CO2) emissions, relative to those from the most efficient condensing boilers. In addition, they lead to operational cost savings for the consumer, depending on house type. However, their capital costs are presently more expensive than a conventional boiler, with the FC being prohibitively so. The ICE and SE variants display the greatest economic and environmental benefit. Nevertheless, the performance and costs associated with these innovative technologies have rapidly improved over the last decade or so. Comparisons are... [more]

In the last few years, deep reinforcement learning has been proposed as a method to perform online learning in energy-efficiency scenarios such as HVAC control, electric car energy management, or building energy management, just to mention a few. On the other hand, quantum machine learning was born during the last decade to extend classic machine learning to a quantum level. In this work, we propose to study the benefits and limitations of quantum reinforcement learning to solve energy-efficiency scenarios. As a testbed, we use existing energy-efficiency-based reinforcement learning simulators and compare classic algorithms with the quantum proposal. Results in HVAC control, electric vehicle fuel consumption, and profit optimization of electrical charging stations applications suggest that quantum neural networks are able to solve problems in reinforcement learning scenarios with better accuracy than their classical counterpart, obtaining a better cumulative reward with fewer parameter... [more]

The increase in energy demand requires urgent investments in sustainable energy. It is vital to the success of the 2030 Agenda, adopted by the United Nations General Assembly. The article aimed to assess the situation of the European Union countries with regard to energy use. Indicators related to the implementation of SDG7 and environmental and resource productivity of the economy were adopted for the study. The research presented in this article fits into contemporary debates on the effectiveness of implementing one of the SDG7: ensuring access to affordable, reliable, sustainable, and modern energy for all. The analysis included 26 countries that have been in the European Union since 2010. The study’s originality lies in the use of primary data obtained from the Eurostat database for three research periods: 2010, 2015, and 2020, which will allow for assessing the situation of the surveyed EU countries in the area of energy use. In order to achieve the research objective, selected me... [more]

Applications of the Internet of Things (IoT) are rapidly utilized in smart buildings and smart cities to reduce energy consumption. This advancement has caused a knowledge gap in applying IoT effectively by experts in the built environment to achieve energy efficiency. The study aims to provide an extensive review of IoT applications for energy savings in buildings and cities. This study contributes to the field of IoT by guiding and supporting built environment experts to utilize IoT technologies. This paper performed a thorough study using a systematic review that covered an overview of IoT concepts, models, applications, trends and challenges that can be encountered in the built environment. The findings indicated limitations in developing IoT strategies in buildings and cities by professionals in this field due to insufficient comprehension of technologies and their applied methods. Additionally, the study found an indefinite implementation and constraints on using IoT when integra... [more]

Most of the charcoal in the world comes from small and medium-sized producers, using rudimentary carbonization kilns that require significant time or energy during the heating and cooling stages of the process. Despite advances in improving the performance, the influence of materials used in the sidewalls of these kilns has been scarcely studied. Therefore, based on numerical simulations, the present study analyses the thermal performance of cylindrical sidewalls composed of combinations of metallic materials, ceramic materials, and insulating blankets grouped in three configurations: configuration I (sidewall with just one material), configuration II (sidewall with two materials assembled in series), and configuration III (pivoting sidewall). Results were encouraging, especially when comparing kiln configuration I with the novel configuration III. Simulations suggested that the proposed configuration III could reduce the heating time by 62%, the cooling time by 91%, the heat supplied... [more]

Jevons Paradox has fundamental implications on sustainable development and the UN Sustainable Development Goals (SDGs). The paradox states that technological improvements aiming to increase the energy efficiency risk causing a rebound effect, and an increase in demand, production, and resource exploitation. Third world countries undergoing early-stage technological development may be particularly vulnerable, but it is also relevant in complex economic systems, where policymaking on climate and energy building on insufficient knowledge and attention to rebound effects can impair the desired outcome in terms of climate change mitigation, resource use and sustainable development.