This paper reports on a comprehensive study of the CO₂-EOR (Enhanced oil recovery) process, a detailed literature review and a numerical modelling study. According to past studies, CO₂ injection can recover additional oil from reservoirs by reservoir pressure increment, oil swelling, the reduction of oil viscosity and density and the vaporization of oil hydrocarbons. Therefore, CO₂-EOR can be used to enhance the two major oil recovery mechanisms in the field: miscible and immiscible oil recovery, which can be further increased by increasing the amount of CO₂ injected, applying innovative flood design and well placement, improving the mobility ratio, extending miscibility, and controlling reservoir depth and temperature. A 3-D numerical model was developed using the CO₂-Prophet simulator to examine the effective factors in the CO₂-EOR process. According to that, in pure CO₂ injection, oil production generally exhibits increasing trends with increasing CO₂ injection rate and volume (in H... [more]

The provision of energy infrastructure is essential for economic growth, social cohesion, and environmental sustainability. Understanding the multiple functions and services it provides us requires firstly a deeper understanding of the factors that influence energy infrastructure itself. This paper focusses on the factors that influence the evolution of energy infrastructure in Nigeria. By studying different eras of energy use according to the technologies that were being implemented, resources that were available, and the political practice of the time it is possible to better frame the drivers of energy infrastructure. The paper explores the transitions of how Nigerians managed to obtain the vast majority of energy from food calories and traditional biomass, to the broad portfolio of energy sources that is in use today.

This paper presents an initial investment cost analysis of public transportation systems operating with wireless charging electric vehicles (EVs). There are three different types of wireless charging systems, namely, stationary wireless charging (SWC), in which charging happens only when the vehicle is parked or idle, quasi-dynamic wireless charging (QWC), in which power is transferred when a vehicle is moving slowly or in stop-and-go mode, and dynamic wireless charging (DWC), in which power can be supplied even when the vehicle is in motion. This analysis compares the initial investment costs for these three types of charging systems for a wireless charging-based public transportation system. In particular, this analysis is focused on the energy logistics cost in transportation, which is defined as the cost of transferring and storing the energy needed to operate the transportation system. Performing this initial investment analysis is complicated, because it involves considerable tra... [more]

Recent growth in the renewable energy industry has increased government support for alternative energy. In the United States, hydropower is the largest source of renewable energy and also one of the most efficient. Currently, there are 30,000 megawatts of potential energy capacity through small- and micro-hydro projects throughout the United States. Increased development of micro-hydro could double America’s hydropower energy generation, but micro-hydro is not being developed at the same rate as other renewable sources. Micro-hydro is regulated by the Federal Energy Regulatory Commission and subject to the same regulation as large hydroelectric projects despite its minimal environmental impact. We studied two cases of micro-hydro projects in Logan, Utah, and Afton, Wyoming, which are both small rural communities. Both cases showed that the web of federal regulation is likely discouraging the development of micro-hydro in the United States by increasing the costs in time and funds for d... [more]

Standalone microgrids, which are mainly constructed on island areas have low system inertia, may result large frequency deviations even for small load change. Moreover, increasing penetration level of renewable energy sources (RESs) into standalone microgrids makes the frequency stability problem even worse. To overcome this problem, this paper proposes an active power sharing method with zero frequency deviations. To this end, a battery energy storage system (BESS) is operated as constant frequency (CF) control mode, whereas the other distributed generations (DGs) are operated as an active and reactive power (PQ) control mode. As a result, a state of charge (SOC) of the BESS is changed as the system load varies. Based on the SOC deviation, DGs share the load change. The SOC data is assumed to be sent via communication system, hence the communication time delay is considered. To enhance reliability, controllers of DGs are designed to take account of the failure of communication system.... [more]

This paper fully describes the working principle of slide valves in single-screw expanders (SSEs). A geometric analysis of suction and volume ratio slide valves is presented to determine the relations between volume ratio, suction closure volume, discharge opening volume and slide valves displacement. An organic Rankine cycle (ORC) thermodynamic model with SSE integrated with slide valves is developed to analyze the power output of SSE and the net power output of ORC system and variation law of slide valves displacement. Analysis of a typical ORC system under changing operating conditions shows that the power output of the expander and the net output power of the ORC system with slide valves are much better than those without slide valves. When the condensing temperature is 40 °C and the waste availability is 80 kW, the increase in output power and net output power are approximately 3.4 kW and 5 kW, respectively. The presented geometric analysis of slide valves and the thermodynamic mo... [more]

The authors wish to make the following corrections to the published paper [1].[...]

In this paper, a generic coordinated control method for wave energy converters is proposed, and the constraints on motion amplitudes and the hydrodynamic interaction between converters are considered. The objective of the control problem is to maximize the energy converted from ocean waves, and this is achieved by coordinating the power take-off (PTO) damping of each wave energy converter in the frequency domain in each sea state. In a case study, a wave energy farm consisting of four converters based on the concept developed by Uppsala University is studied. In the solution, motion constraints, including constraints on the amplitudes of displacement and velocity, are included. Twelve months of sea states, based on measured wave data at the Lysekil test site on the Swedish west coast, are used in the simulation to evaluate the performance of the wave energy farm using the new method. Results from the new coordinated control method and traditional control method are compared, indicating... [more]

We propose an optimal electric and heat energy management for a cooperative multi-microgrid community. The sequentially-coordinated operation for heat energy is proposed in order to distribute the computational burden as an extension of “Optimal Energy Management of Multi-Microgrids with Sequentially Coordinated Operations” and is following the sequentially-coordinated operations for electric energy in it. This sequentially-coordinated operation for heat energy is mathematically modeled and how to obtain the global heat energy optimization solution in the cooperative multi-microgrid community is presented. The global heat energy optimization is achieved for the cooperative community by adjusting the combined electric and heat energy production amounts of combined heat and power (CHP) generators and the heat energy production amount of heat only boilers (HOBs) which satisfy all heat loads, as well as optimize the external electric energy trading in order to minimize the unnecessary cost... [more]

In this paper, we investigate the energy problem of monitoring sensors on high-voltage power transmission lines and propose a wireless charging scheme for a Radio Frequency IDentification (RFID) sensor tag to solve a commercial efficiency problem: the maintenance-caused power outage. Considering the environmental influences on power transmission lines, a self-powered wireless energy relay is designed to meet the energy requirement of the passive RFID sensor tag. The relay can obtain the electric field energy from the transmission lines and wirelessly power the RFID sensor tags around for longer operating distance. A prototype of the energy relay is built and tested on a 110 kv line. The measurement results show that the energy relay can provide stable energy even with the influences of wind, noise and power outage. To our knowledge, it is the first work to power the RFID sensor tags on power transmission lines.

In the field of state of charge (SOC) estimation, the Kalman filter has been widely used for many years, although its performance strongly depends on the accuracy of the battery model as well as the noise covariance. The Kalman gain determines the confidence coefficient of the battery model by adjusting the weight of open circuit voltage (OCV) correction, and has a strong correlation with the measurement noise covariance (R). In this paper, the online identification method is applied to acquire the real model parameters under different operation conditions. A criterion based on the OCV error is proposed to evaluate the reliability of online parameters. Besides, the equivalent circuit model produces an intrinsic model error which is dependent on the load current, and the property that a high battery current or a large current change induces a large model error can be observed. Based on the above prior knowledge, a fuzzy model is established to compensate the model error through updating... [more]

Wind power has achieved great development in Northern China, but abundant wind power is dissipated, rather than utilized, due to inflexible electricity production of combined heat and power (CHP) units. In this paper, an integrated CHP system consisting of CHP units, wind power plants, and condensing power plants is investigated to decouple the power and heat production on both the power supply side and heat supply side, by incorporating electrical energy storage (EES) and thermal energy storage (TES). Then the integrated CHP system dispatch (ICHPSD) model is formulated to reach the target of reducing wind power curtailment and primary energy consumption. Finally, the feasibility and effectiveness of the proposed ICHPSD model are verified by the six-bus system, and the simulation results show that EES has a better effect on wind power integration than TES. The annual net benefits by incorporating EES and TES increase with increasing wind penetration, but they gradually approach saturat... [more]

This paper reviews the most recent and relevant research into the variability characteristics of wind and solar power resources in Europe. The background for this study is that wind and solar resources will probably constitute major components of the future European power system. Such resources are variable, and EU plans to balance the variability with more grids and demand response. Thus, planning for the future power system requires an in-depth understanding of the variability. Resource variability is a multi-faceted concept best described using a range of distinct characteristics, and this review is structured on the basis of seven of these: Distribution Long-Term (hours to years), Distribution Short-Term (less than one hour), Step Changes, Autocorrelation, Spatial Correlation, Cross Correlation and Predictable Patterns. The review presents simulations and empirical results related to resource variability for each of these characteristics. Results to date reveal that the variability... [more]

Interest in DC microgrids is rapidly increasing along with the improvement of DC power technology because of its advantages. To support the integration process of DC microgrids with the existing AC utility grids, the form of hybrid AC/DC microgrids is considered for higher power conversion efficiency, lower component cost and better power quality. In the system, AC and DC portions are connected through interlink bidirectional AC/DC converters (IC) with a proper control system and power management. In the stand-alone operation mode of AC/DC hybrid microgrids, the control of power injection through the IC is crucial in order to maintain the system security. This paper mainly deals with a coordination control strategy of IC and a battery energy storage system (BESS) converter under stand-alone operation. A coordinated control strategy for the IC, which considers the state of charge (SOC) level of BESS and the load shedding scheme as the last resort, is proposed to obtain better power shar... [more]

A new mathematical approach to the diffusion of energy-efficient technologies is presented using the diffusion of natural processes as an analogy. This approach is applied to the diffusion of the electric arc furnace in Japan. The main advantage offered by the new approach is the incorporation of an average effect of barriers to, and support measures for, innovation. This approach also incorporates some of the parameters influencing the cost-effectiveness of the investment in the new technology as the main driver for adopting the innovation. The straightforward equivalence between natural phenomena and the diffusion of innovation requires the conceptual abstraction of setting a dimension (and defining) the medium in which the diffusion takes place. This new approach opens new research paths to analysing under what circumstances innovations can take-off, the effect of barriers in the diffusion of energy efficient technologies, or how the diffusion process is incorporated in energy-syste... [more]

We present a model to evaluate the server lifetime in cloud data centers (DCs). In particular, when the server power level is decreased, the failure rate tends to be reduced as a consequence of the limited number of components powered on. However, the variation between the different power states triggers a failure rate increase. We therefore consider these two effects in a server lifetime model, subject to an energy-aware management policy. We then evaluate our model in a realistic case study. Our results show that the impact on the server lifetime is far from negligible. As a consequence, we argue that a lifetime-aware approach should be pursued to decide how and when to apply a power state change to a server.

Located in East Africa, Uganda is one of the most economically deprived countries that is likely to be dramatically affected by climate change. Over 50% of Ugandan families live in single-roomed overcrowded properties and over 60% of the country’s urban population live in slums. Moreover, the gradual shift towards relatively modern and low thermal resistance building materials, in addition to imminent thermal discomfort due to global warming, may considerably affect the health and wellbeing of low-income people, the majority of whom live in low quality homes with very little or no access to basic amenities. This paper evaluates the effects of various construction methods as well as refurbishment strategies on thermal comfort in low-income houses in Uganda. It is aimed at helping low-income populations adapt to climate changes by developing simple, effective and affordable refurbishment strategies that could easily be applied to existing buildings. Dynamic thermal simulations are conduc... [more]

A calibrated building simulation model was developed to assess the energy performance of a large historic research building. The complexity of space functions and operational conditions with limited availability of energy meters makes it hard to understand the end-used energy consumption in detail and to identify appropriate retrofitting options for reducing energy consumption and greenhouse gas (GHG) emissions. An energy simulation model was developed to study the energy usage patterns not only at a building level, but also of the internal thermal zones, and system operations. The model was validated using site measurements of energy usage and a detailed audit of the internal load conditions, system operation, and space programs to minimize the discrepancy between the documented status and actual operational conditions. Based on the results of the calibrated model and end-used energy consumption, the study proposed potential energy conservation measures (ECMs) for the building envelop... [more]

This article presents the results of comparative studies on streamer propagation and breakdown in a point-insulating plate electrode system in mineral oil and two ester liquids. The studies were performed for a 10-mm gap and a positive standard lightning impulse. The work was focused on the comparison of light waveforms registered using the photomultiplier technique. The results indicated that both esters demonstrate a lower resistance against the appearance of fast energetic streamers than mineral oil. The reason for such a conclusion is that the number of lightning impulses supplied to the electrode system for which the above-mentioned fast streamers appeared at a given voltage level was always higher in the case of ester liquids than mineral oil. In terms of breakdown, the esters tested were assessed as more susceptible to the appearance of breakdown in the investigated electrode system. The number of breakdowns recorded in the case of esters was always greater than the correspondin... [more]

Brazil is currently the world’s largest sugar producer and exporter, as well as the world’s largest producer and consumer of sugarcane ethanol as a transportation fuel. The growth of this market originates from a combination of government policies and technological change, in both the sugarcane ethanol processing sector and the manufacture of flex-fuel vehicles. In recent years however, ethanol production has been questioned due to its possible impact on food prices. The present paper aims to explore the impact of Brazilian ethanol prices on sugar and gasoline prices. The relationships between a times series of these prices are investigated using a Vector Error Correction Model (VECM), supported by Granger Causality tests. In addition, Impulse Response Functions (IRFs) and Forecast Error Variance Decompositions (FEVD) are computed in order to investigate the dynamic interrelationships within these series. Our results suggest that ethanol prices are affected by both food and fuel prices... [more]

In this work, we investigate scheduling problems for electrical energy storage systems and formulate an algorithm that finds an optimal solution with minimal charging cycles in the case of a single device. For the considered problems, the storage system is used to reduce the peaks of the production and consumption within (part of) the electricity distribution grid, while minimizing device wear. The presented mathematical model of the storage systems captures the general characteristic of electrical energy storage devices while omitting the details of the specific technology used to store the energy. In this way, the model can be applied to a wide range of settings. Within the model, the wear of the storage devices is modeled by either: (1) the total energy throughput; or (2) the number of switches between charging and discharging, the so-called charging cycles. For the first case, where the energy throughput determines the device wear, a linear programming formulation is given. For the... [more]

This work reports the performance of an energy converter characterized by an emitting parallelepiped element with inside two, three, or five swirling connected combustion chambers. In particular, the idea is to adopt the heat released by H₂/air combustion, occurring in the connected swirling chambers, to heat up the emitting surfaces of the thermally-conductive emitting parallelepiped brick. The final goal consists in obtaining the highest emitting surface temperature and the highest power delivered to the ambient environment, with the simultaneous fulfillment of four design constraints: dimension of the emitting surface fixed to 30 × 30 mm², solar mode thermal efficiency greater than 20%, emitting surface peak temperature T > 1000 K, and its relative ∆T < 100 K in the combustion mode operation. The connected swirling meso-combustion chambers, inside the converter, differ only in their diameters. Combustion simulations are carried out adopting 500 W of injected chemical power, stoichio... [more]

In this paper, a two-dimensional Cournot model is proposed to study generation companies’ (GENCO’s) strategic quantity-setting behaviors in the newly established Yunnan’s electricity market. A hybrid pricing mechanism is introduced to Yunnan’s electricity market with the aim to stimulate electricity demand. Market equilibrium is obtained by iteratively solving each GENCO’s profit maximization problem and finding their optimal bidding outputs. As the market mechanism is a key element of the electricity market, impacts of different market mechanism parameters on electricity price and power generation in market equilibrium state should be fully assessed. Therefore, based on the proposed model, we precisely explore the impacts on market equilibrium of varying parameters such as the number of GENCOs, the quantity of ex-ante obligatory-use electricity contracts (EOECs) and the elasticity of demand. Numerical analysis results of Yunnan’s electricity market show that these parameters have nota... [more]

A self-sustainable base station (BS) where renewable resources and energy storage system (ESS) are interoperably utilized as power sources is a promising approach to save energy and operational cost in communication networks. However, high battery price and low utilization of ESS intended for uninterruptible power supply (UPS) necessitates active utilization of ESS. This paper proposes a multi-functional framework of ESS using dynamic programming (DP) for realizing a sustainable BS. We develop an optimal charging and discharging scheduling algorithm considering a detailed battery wear-out model to minimize operational cost as well as to prolong battery lifetime. Our approach significantly reduces total cost compared to the conventional method that does not consider battery wear-out. Extensive experiments for several scenarios exhibit that total cost is reduced by up to 70.6% while battery wear-out is also reduced by 53.6%. The virtue of the proposed framework is its wide applicability... [more]

This paper proposes a novel protection method for single line-to-ground (SLG) faults in ungrounded low-inertia microgrids. The proposed method includes microgrid interface protection and unit protection. The microgrid interface protection is based on the difference between the zero-sequence voltage angle and the zero-sequence current angle at the microgrid interconnection transformer for fast selection of the faulty feeder. The microgrid unit protection is based on a comparison of the three zero-sequence current phase directions at each junction point of load or distributed energy resources. Methods are also included to locate the minimum fault section. The fault section location technology operates according to the coordination of microgrid unit protection. The proposed method responds to SLG faults that may occur in both the grid and the microgrid. Simulations of an ungrounded low-inertia microgrid with a relay model were carried out using Power System Computer Aided Design (PSCAD)/E... [more]