Mass tourism puts enormous pressure on wastewater treatment plants due to its expansive growth during the summer months. To adapt to the fluctuations, the Ravda wastewater treatment plant (WWTP) uses innovative methods and technologies, allowing for “shrinking” and “expanding” of the facilities according to the season. This has been built in stages over the years, with two separate biological treatment lines adapting to different numbers of tourists and to the quantity of influent wastewater. The aim of this study is to make a comparative assessment of the work of WWTP Ravda in the summer and winter seasons and its effectiveness, as well as to compare them. In addition, it examines the years of the COVID-19 pandemic, when a much higher consumption of water per person was noted. Data were analyzed for the period of 2018−2022 inclusive, comparing influent and effluent BOD5 and COD in the summer and winter. Nitrogen and phosphorus removal efficiencies were also tracked. The study shows th... [more]

The improper discharge of industrial wastewater causes severe environmental pollution and the textile industry’s dye usage contributes significantly to industrial wastewater pollution. Hence, an effective method for removing the harmful substance methylene blue (MB) from dye wastewater is proposed. This method adopts a three-dimensional graphene composite material based on manganese dioxide (MnO2), named polyurethane@ reduced graphene oxide@ MnO2 (PU@RGO@MnO2). First, graphene is prepared with hydrazine hydrate as a reducing agent and polyurethane as a framework. MnO2 nanoparticles are synthesized by the reaction of potassium permanganate (KMnO4) with carbon. These nanoparticles are then loaded onto the three-dimensional framework to create the composite material. Finally, adsorption and removal experiments for MB are conducted to compare the performance of the composite material. The results indicate that the graphene based on the polyurethane framework exhibits favorable mechanical p... [more]

We explored the migration and distribution of heavy metal pollution in a dry and windy area in northern China. We collected soil, atmospheric deposition, and water samples, and measured heavy metal concentrations. Cu, Zn, As, and Pb in the 0−10 cm soil layer had a fan-shaped distribution, consistent with their atmospheric deposition fluxes. This indicates that the distribution of these heavy metals was driven by strong winds. The concentration of Cd in the river increased from 0.257 mg/L upstream to 0.460 mg/L downstream, resulting in the same distribution trends as soil near the river. Surface runoff may therefore drive Cd migration. The concentration of Pb in the river exceeded the pollution threshold, resulting in accumulation in the 5−10 cm soil layer. Atmospheric deposition fluxes were consistent with the soil distribution results, and principal component analysis showed that the contribution of surface runoff was high. This suggests that the migration of Pb and Cr is driven by bo... [more]

Melanoidins, as macromolecular heterogeneous organic polymers, are produced from the Maillard reaction between amino and carbonyl groups during the thermal hydrolysis pretreatment (THP) of sludge. The brown color and recalcitrance of melanoidins pose a serious threat to wastewater treatment systems, such as invalidating UV disinfection and decreasing the efficiency of anaerobic digestion; thus, they have gradually received much concern in recent years. However, currently the study on THP-origin melanoidins is limited by a lack of reliable extraction and quantification methods. This paper presents a comprehensive review of the physical, chemical, and biological properties of melanoidins from different sources to fill the research gap on THP-origin melanoidins. The adverse effects of melanoidins on the management of wastewater and sludge are discussed, and for the first time, special attention is paid to the potential environmental hazards of THP-origin melanoidins to natural ecosystems.... [more]

The construction and development of energy storage are crucial areas in the reform of China’s power system. However, one of the key issues hindering energy storage investments is the ambiguity of revenue sources and the inaccurate estimation of returns. In order to facilitate investors’ understanding of revenue sources and returns on investment of energy storage in the existing electricity market, this study has established multiple relevant revenue quantification models. The research methodology employed in this paper consists of three main components: Firstly, we established a revenue model and a cost model for energy storage participation in the electricity market. These models focus on arbitrage revenue, subsidy revenue, auxiliary services revenue, investment cost, operational and maintenance cost, and auxiliary service cost of energy storage. Subsequently, we utilized an enhanced Grey Wolf Optimizer algorithm to solve the optimization problem and maximize revenue, thus obtaining t... [more]

Egypt faces significant challenges in managing its sewage sludge generated in large quantities from wastewater treatment plants. This study investigates the feasibility of utilizing sewage sludge as a renewable resource for hydrogen production through anaerobic digestion at the 100 L bioreactor level. Hydrogen is considered a promising alternative energy source due to its high energy content and environmental benefits. To optimize the microbial degradation process and maximize hydrogen production from sewage sludge, a specialized pretreatment is necessary. Various pretreatment methods have been applied to the sewage sludge, individually and in combination, to study the bio-hydrogen production from sewage sludge. The four methods of treatment were studied in batch assays as a pilot scale. Thermal pretreatment of sewage sludge significantly increases bio-hydrogen production yield compared to other sewage sludge pretreatment methods, producing the highest H2 yield (6.48 LH2/g VS). In gene... [more]

This review focuses on the energy structure of iron and steel production and a feasible development path for carbon reduction. The process path and feasible development direction of carbon emission reduction in the iron and steel industry have been analyzed from the perspective of the carbon−electricity−hydrogen ternary relationship. Frontier technologies such as “hydrogen replacing carbon” are being developed worldwide. Combining the high efficiency of microwave electric-thermal conversion with the high efficiency and pollution-free advantages of hydrogen-reducing agents may drive future developments. In this review, a process path for “microwave + hydrogen” synergistic metallurgy is proposed. The reduction of magnetite powder by H2 (CO) in a microwave field versus in a conventional field is compared. The driving effect of the microwave field is found to be significant, and the synergistic reduction effect of microwaves with H2 is far greater than that of CO.

Three-compartment septic tanks are a prominently advocated environmentally sustainable sanitation facility in rural China. However, the comprehensive elimination efficacy and underlying mechanisms of pathogenic bacteria within septic tanks remain incompletely understood. In particular, the operational performance in low-temperature conditions has received limited attention in the existing literature. In this work, a simulation of the three-compartment septic tank treatment system was conducted under low-temperature conditions (15 °C). The operational results exemplify the synergistic interplay of volatile fatty acids (VFAs), NH3-N, and bacterial communities, culminating in a partial reduction in Enterococcus faecalis, Escherichia coli, Staphylococcus aureus, and Salmonella enteritidis, within the three-compartment septic tank. Their respective population abundances were decreased by magnitudes of 2.2, 1.3, 0.03, and 1.46 logarithmic units (copies/mL), respectively. Through the utilizat... [more]

This study endeavors to enhance the operational efficiency of extant coal-fired power plants to mitigate the adverse environmental impact intrinsic to the prevalent utilization of coal-fired power generation, which is particularly dominant in China. It focuses on the assessment and optimization of continuous denitrification systems tailored for a 1000 MW ultra-supercritical pulverized coal boiler. The extant denitrification framework encounters challenges during startup phases owing to diminished selective catalytic reduction (SCR) inlet flue gas temperatures. To ameliorate this, three retrofit schemes were scrutinized: direct mixing of high-temperature flue gas, bypass flue gas mixing, and high-temperature flue gas mixing with cold air. Each option underwent meticulous thermodynamic computations and comprehensive cost analyses. The findings elucidated that bypass flue gas mixing, involving the extraction and blending of high-temperature flue gas, emerged as the most financially pruden... [more]

One of the most widespread and risky pollutants in the environment is phenol. It is a by-product of many industrial, agricultural, and other anthropogenic activities. Microbial-assisted transformation, known as bioremediation, is an effective and cheap method for treating groundwater, soil, and sediments contaminated with phenol and its derivates. This study aims to assess the effect of the addition of a selected, pre-adapted bacterial strain Pseudomonas aureofaciens AP-9 on key kinetic, microbiological, and enzymological parameters of simulated bioremediation processes for the removal of phenol (250 mg/kg). The early effect of adding this microbial biodegradant in contaminated sediments is insignificant. The effect of added bacteria is manifested at the 48th hour by a restructuring of the microbial sediment communities and an increase in the number of cultivated microorganisms. This preparation of the sediment communities for a prolonged detoxification process is also confirmed by the... [more]

Dry machining has gained significant importance in the last few years due to its promising contribution towards sustainability. This review study introduces dry machining, presents its benefits, and summarizes the recent technological developments that can facilitate dry machining. It aims to provide a concise overview of the current state of the art in dry machining to promote sustainability. This article synthesizes and emphasizes the useful information from the existing literature, and summarizes the methods and tools used to implement it. It also identifies some of the major problems and challenges and their potential solutions to make dry machining more viable and efficient. It concludes with some future research directions important for the scholars and researchers to establish the field further. From this review study, the major findings are: (1) tools with textures or patterns can enhance the cutting performance of dry machining for various materials, (2) tool coating is an eff... [more]

The critical role of energy in contemporary life and the environmental challenges associated with its production imply the need for research and exploration of its novel resources. The present review paper emphasizes the continuous exploitation of non-renewable energy sources, suggesting the transition toward renewable energy sources, termed ‘green energy’, as a crucial step for sustainable development. The research methodology involves a comprehensive review of articles, statistical data analysis, and examination of databases. The main focus is biomass, a valuable resource for bioenergy and biopesticide production, highlighting not only its traditional diverse sources, such as agricultural waste and industrial residues, but also non-edible invasive alien plant species. This study explores the utilization of invasive alien species in circular economy practices, considering their role in bioenergy and biopesticide production. The potential conflict between bioproduct acquisition and foo... [more]

In response to the urgent need to address climate change and reduce carbon emissions, there has been a growing interest in innovative approaches that integrate AI and CDR technology. This article provides a comprehensive review of the current state of research in this field and aims to highlight its potential implications with a clear focus on the integration of AI and CDR. Specifically, this paper outlines four main approaches for integrating AI and CDR: accurate carbon emissions assessment, optimized energy system configuration, real-time monitoring and scheduling of CDR facilities, and mutual benefits with mechanisms. By leveraging AI, researchers can demonstrate the positive impact of AI and CDR integration on the environment, economy, and energy efficiency. This paper also offers insights into future research directions and areas of focus to improve efficiency, reduce environmental impact, and enhance economic viability in the integration of AI and CDR technology. It suggests impr... [more]

The increased concentration of CO2 in the atmosphere has a strong impact on global warming. Therefore, efficient technologies must be used to reduce CO2 emissions. One of the methods is the biofixation of CO2 by microalgae and cyanobacteria. This is now a widely described technology that can improve the economics of biomass production and reduce CO2 emissions. There are no reports on the possibility of using it to clean exhaust gases from biogas combustion. The aim of the research was to determine the possibility of using Arthrospira platensis cultures to remove CO2 from biogas combustion. The efficiency of biomass production and the effectiveness of biological CO2 fixation were evaluated. The use of exhaust gases led to a more efficient increase in cyanobacterial biomass. The growth rate in the exponential phase was 209 ± 17 mgVS/L·day, allowing a biomass concentration of 2040 ± 49 mgVS/L. However, the use of exhaust gases led to a decrease in the pH of the culture medium and a rapid... [more]

The rising number of natural gas purification plants has raised concerns about safety and environmental issues related to VOC (Volatile Organic Compounds) leakage. Therefore, it is crucial to conduct in-depth research on oil vapor emission patterns in these plants. Taking a typical natural gas purification plant as an example, a 1:1 scale model was established. Using methanol as the simulated medium, a study was conducted to investigate the impact of multiple leaks on the dispersion process of VOCs at the plant, combining field sampling with numerical simulation. The results indicate that wind speed influences the concentration of oil vapor, particularly on the leeward side, where vortex and reflux phenomena occur. The area of high concentration of oil vapor at v = 4 m·s−1 is eight times that at v = 8 m·s−1. Gravity and eddy currents contribute to the accumulation of oil vapor, especially closer to the central area of the plant where surrounding buildings obstruct dispersion. Smaller d... [more]

The global concern regarding the release of micropollutants (MPs) into the environment has grown significantly. Considerable amounts of persistent micropollutants are present in industrial discharges. Depending solely on a singular treatment approach is inadequate for the effective removal of MPs from wastewater due to their complex composition. The performance of different treatment methods to meet the discharge standards has been widely studied. These efforts are classified as hybrid and sequential processes. Despite their adequate performance, the optimization and industrial application of these methods could be challenging and costly. This review focuses on integrated (sequential) and hybrid processes for MP removal from actual wastewater. Furthermore, to provide a thorough grasp of the treatment approaches, the operational conditions, the source of wastewater containing MPs, and its characteristics are detailed. It is concluded that the optimal sequence to achieve the removal of M... [more]

Optimizing the multilayer thermal insulation of pipelines transporting liquids and gases at higher than ambient temperatures is crucial for heat energy conservation and cost optimization. This study utilizes a multi-objective genetic algorithm to optimize the multilayer thermal insulation thickness around a pipe carrying fluid to minimize heat loss and associated costs. The model adopted mathematical associations between design variables and the overall installation cost of layers over a pipe from the available literature. The proposed model considered one or more insulation layers of rock wool and calcium silicate to oil pipelines containing steam, furfural, reduced crude or 300-distillate oil. All calculations considered fixed-charge rates as a fraction of 1 or 0.15. The results were compared with standard values and those predicted by other researchers in the literature. For the steam line, the standard insulation thickness was 50 mm, jumping to 327 mm for rock wool and 232 mm for c... [more]

The use of olive cake, an abundant residue in the olive oil industry, has been studied by developing a biorefinery scheme. The aim was to develop a novel, efficient, and environmentally friendly strategy for the valorization of olive cake, contributing to sustainable agriculture. A special extraction procedure based on a combination of hydrothermal treatments with liquid/liquid extractions was designed to produce value-added products, along with solids that can be used for energy or adsorbent production. The optimal extraction conditions were determined by exploring the influence of the operating variables (temperature, extraction time, solvent type, solvent/extract ratio, extraction stages, and pH) on the extraction yield. The decision about the optimal conditions was made by adjusting the experimental results to a neuro-fuzzy model. Glucose and inositol showed similar response surfaces, allowing simultaneous concentration in a single process. Under optimal extraction conditions, the... [more]

In this paper, various thermal energy systems are studied to recover waste heat from gas turbines with different configurations. The exergy analysis and environmental examination are applied to achieve better insight into the suggested systems. Also, multi-objective optimization is employed to find the optimal condition of the introduced plants. In this work, various systems such as gas turbine (GT), organic Rankine cycle (ORC), and Kalina cycle (KC) with Proton Exchange Membrane (PEM) electrolyzer are combined to achieve a new system design. In this study, Engineering Equation Solver (V11.755) and Matlab (R2023a) software are used to simulate and optimize the proposed system. The comparison of systems shows that the combustion chamber with 3622 kW has the most considerable exergy destruction in the IGT/ORC-KC plant. The comparative investigation shows that IGT/ORC-KC has the highest output at 5659 kW, while the smallest exergy destruction is associated with the IGT system with 1779 kW... [more]

Aerobic granular sludge (AGS) represents a significant advancement in wastewater treatment technology [...]

The objective of this inquiry is to illuminate the attributes of heavy metal contamination and evaluate the potential ecological hazards inherent in the surface soil of Chenzhou City. A comprehensive analysis was conducted on 600 systematically collected soil samples within the study area, utilizing enrichment factors, geo-accumulation indices, comprehensive pollution indices, potential ecological hazard indices, and health risk assessment models to evaluate the degree of heavy metal contamination in the soil, potential ecological risks, and associated health hazards. The findings reveal that the average enrichment factor (EF) for each heavy metal is below 2, with the hierarchy from highest to lowest being Hg > Cd > Cu > Pb > Ni > Zn > Cr > As. Approximately 78.67% of soil samples exhibit no pollution to weak pollution levels based on heavy metal enrichment factors. Moreover, the comprehensive pollution index (IPIN) indicates that 95.17% of soil samples are within safe and pollution-fr... [more]

The steel industry in China, the world’s largest, contributes to about 15% of the nation’s total carbon emissions. Instead of direct combustion, the technology of converting off-gas from the steel industry into liquid fuels not only enhances the added value of this byproduct but also helps alleviate carbon emissions. This study, for the first time, integrates the specific circumstances of China to evaluate the carbon emissions of Ethanol to Jet (ETJ) and Fischer−Tropsch to Jet (FTJ) fuel technologies utilizing Basic Oxygen Furnace Gas (BOFG) and Coke Oven Gas (COG) as feedstocks. Six cases were examined using Aspen Plus (V11) for mass and energy balance: Case 1: BOFG/ETJ, Case 2: BOFG/FTJ, Case 3: COG/ETJ, Case 4: COG/FTJ, Case 5: (COG + BOFG)/ETJ, and Case 6: (COG + BOFG)/FTJ. The analysis underscores that the FTJ pathway exhibits superior carbon reduction efficiency relative to ETJ. Compared to traditional petroleum-based aviation fuels (86.65 g CO2eq/MJ), the FTJ pathways utilizing... [more]

In 2019, one of the Editorial Staff of the MDPI journal Processes, sent me an email informing me that I was being invited to join the Editorial Board of the journal, a proposal that I accepted [...]

A scramjet engine consisting of several components is a highly coupled system that urgently needs a universal performance metric. Exergy is considered as a potential universal currency to assess the performance of scramjet engines. In this paper, a control-volume-based exergy method for the Reynolds-averaged Navier−Stokes solution of truncated and corrected Busemann inlets was proposed. An exergy postprocessing code was developed to achieve this method. Qualitative and quantitative analyses of exergies in the Busemann inlets were performed. A complete understanding of the evolution process of anergy and the location where anergy occurs in the inlet at various operation conditions was also obtained. The results show that the exergy destroyed in the Busemann inlet can be decomposed into shock wave anergy, viscous anergy and thermal anergy. Shock wave anergy accounts for less than 4% of the total exergy destroyed while thermal anergy and viscous anergy, in a roughly equivalent magnitude,... [more]

The increase in waste polymer recycling has helped in promoting sustainability, and together with the use of renewable raw materials, it has become a widespread concept with positive effects on both the economy and ecology. Accordingly, the aim of this study was the synthesis of “green” plasticizers, marked as LA/PG/PET/EG/LA, formed from waste poly(ethylene terephthalate) (PET) and bio-based platform chemicals propylene glycol (PG) and levulinic acid (LA). The structure of the obtained plasticizers was complex, as confirmed by results from nuclear magnetic resonance (NMR) and Fourier-transform infrared spectroscopy (FTIR) analysis. The LA/PG/PET/EG/LA plasticizers and waste poly(vinyl chloride) (PVC) were used in an optimized technology for PVC re-granulate production. The hardness of the PVC-based material with “green” plasticizers, in comparison to commercial plasticizer dioctyl terephthalate (DOTP), increased by 11.3%, while migration decreased. An improved material homogeneity and... [more]