The world’s demand for electricity will double by 2050. Despite its high potential as an eco-friendly technology for generating electricity, solar energy only covers a small percentage of the global demand. One of the challenges is associated with the sustainable use of land resources. Floating PV (FPV) plants on water bodies such as a dam, reservoir, canal, etc. are being increasingly developed worldwide as an alternative choice. In this background, the purpose of this research is to provide an outline of the hybrid floating solar system, which can be used to generate renewable energy. The hybrid technologies discussed include: FPV + hydro systems, FPV + pumped hydro, FPV + wave energy converter, FPV + solar tree, FPV + tracking, FPV + conventional power, FPV + hydrogen. The review also summarizes the key benefits and constraints of floating solar PV (FPV) in hybrid operation. Among the various hybrid FPV technologies, with solar input and hydro energy were among the most promising me... [more]

For corrugated pipes with a square groove, it is known that there is no interaction between the main flow and groove flow when the aspect ratio is less than four. When the groove length and height are different, the interaction occurs in the pipe. In previous studies, it was investigated whether this interaction is dependent on groove length. However, when changing the groove height, the shape of the vortex generated inside the groove changes, which may cause the interaction to occur. Therefore, in this paper the interaction between the main and groove flow of corrugated pipes is investigated when changing both groove height as well as groove pitch, corresponding to an aspect ratio of less than four. For the groove height, the flow out of the groove after impingement changes with the shape of the secondary vortex in the groove. This flow deforms the velocity distribution in the main flow, and thus the friction factor is different. For the groove pitch, there is no difference in v-veloc... [more]

Turbomachinery with double counter-rotating impellers offers more degrees of freedom in the choice of design and control parameters compared to conventional machines. For these innovative machines, the literature review shows that more publications concerning axial type turbomachines are available than centrifugal ones. This work deals with a design and experimental performance analysis, applied to two counter-rotating impellers of a centrifugal compressor “CRCC”. CRCC was designed with a specifically developed tool based on mean-line approach coupled with optimization algorithms and a stream-curvature through-flow method to satisfy the design criteria. This paper presents an experimental validation of the CRCC design tool and its performances against the baseline “SR”, composed of one centrifugal impeller and a volute for which experimental data are available. CRCC numeric simulations are also validated by experimental data. For a fair comparison between CRCC and SR, the same volute i... [more]

The Korea Atomic Energy Research Institute (KAERI) has developed the DeCART2D 2-dimensional (2D) method of characteristics (MOC) transport code and the MASTER nodal diffusion code and has established its own two-step procedure. For design code licensing, KAERI prepared a critical experiment on the verification and validation (V&V) of the DeCART2D code. DeCART2D is able to perform the MOC calculation only for 2D nuclear fuel systems, such as the fuel assembly. Therefore, critical buckling in the vertical direction is essential for comparison between the results of experiments and DeCART2D. In this study, the B1 theory-augmented Monte Carlo (MC) method was adopted for the generation of critical buckling. To examine critical buckling using the B1 theory-augmented MC method, TCA critical experiment benchmark problems were considered. Based on the TCA benchmark results, it was confirmed that the DeCART2D code with the newly-generated critical buckling predicts the criticality very well. In... [more]

A method for selecting dynamic parameters and structures of drive systems using the synthesis algorithm is presented. The dynamic parameters of the system with six degrees of freedom, consisting of a power component (motor) and a two-speed gearbox, were determined, based on a formalized methodology. The required gearbox is to work in specific resonance zones, i.e., meet the required dynamic properties such as the required resonance frequencies. In the result of the tests, a series of parameters of the drive system, defining the required dynamic properties such as the resonance and anti-resonance frequencies were recorded. Mass moments of inertia of the wheels and elastic components, contained in the required structure of the driving system, were determined for the selected parameters obtained during the synthesis.

Although rail is one of the most sustainable transport systems, there is still room to reduce its energy demand. In particular, during the braking of DC powered trains, a significant amount of energy is wasted. The recent developments in energy storage system technologies, combined with the widely used technique of regenerative braking, can considerably increase energy saving. This paper explores this theme, quantifying the amount of braking energy that can be potentially recovered in a real case study, starting from the experimental data measured on-board train. A simplified numerical model of the recovery process has been implemented. Adopting it, the energy that can be saved, with one or two energy storage systems, has been quantified for each possible position along the track. The procedure allows to determine the optimal position. Further findings about the impact of voltage level on the efficiency of the recovery process have been reported. The optimal level of voltage has been d... [more]

The near and mid-term future of the existing Polish coal-fired power fleet is uncertain. The longer-term operation of unabated coal power is incompatible with climate policy and is economically challenging because of the increasing price of CO2 emission allowances in the EU. The results of the techno-economic analysis presented in this paper indicate that the retrofit of existing coal-fired units, by means of replacing coal-fired boilers with small modular reactors, may be an interesting option for the Polish energy sector. It has been shown that the retrofit can reduce the costs in relation to greenfield investments by as much as 35%. This analysis focuses on the repowering of a 460 MW supercritical coal-fired unit based on the Łagisza power plant design with high temperature small modular nuclear reactors based on the 320 MWth unit design by Kairos Power. The technical analyses did not show any major difficulties in integrating. The economic analyses show that the proposed retrofits... [more]

We propose a dust removal technology in which a two-stage moving granular bed filter was employed using coarse and fine filtering granules. The pressure drop, collection efficiency, and dust particulate size distributions were investigated using various mass flow rates for coarse and fine granules at room temperature. In addition, the ratio of mass consumption was used to reveal the actual mass flow. The ratio of mass consumption influenced the pressure drop, collection efficiency, and dust particulate size distributions. Particulates larger than 1.775 μm were removed by the filter. Our results showed that a mass flow of 330 g/min for coarse granules and a mass flow of 1100 g/min for fine granules provided optimal collection efficiency and particulate size distribution. The proposed design can aid the development of high-temperature systems in power plants.

Climate changes are nowadays reality and affect all aspects of everyday life. One of the places where these changes influence the society the most is the Brazilian Ceará region and Jaguaribara basin that suffer long-lasting, devastating drought cycles. They have a dramatic negative impact on local economy, forcing change in business models. This work presents the valorisation of wastes and residues from local fish, prawns, and the vegetable-cultivation industry via biogas production forced to adapt to these new circumstances. Along a single year, as much as 189.74 tonnes of wastes and residues can be processed by the biogas production facility, producing as much as 94 GJ of cooling energy and 1 tonne of biofertiliser monthly. Even for such a small biogas production facility, the NPV is positive already after 11 years; its IRR is 6.2%, and accumulated ROI for 20 years of operation is as high as 77.8%. This work demonstrates that a valorisation of industrial wastes and residues via bioga... [more]

This paper describes the concept of a multilayer brushless DC motor which is suitable for use on unmanned aerial vehicles (UAVs) and capable of carrying a heavy payload. The paper deals with a unique multilayer structure, using three standard stators placed in parallel with a single rotor body, to increase the torque even under low-speed conditions. In this solution, nine inner windings can use different star/delta interconnections to optimize the performance of the BLDC motor on demand. The proposed multilayer BLDC motor solution utilizes the main advantages of BLDC motors, ensuring highly reliable operation, and thus enabling a BLDC motor to be applied to UAVs. This paper gives an overview of the design, assumes an extension with an electronic inner winding switching capability, and provides practical details about realization, testing, and experimental verification. Practical measurements and obtained data are utilized to confirm the approach.

Sources such as solar and wind energy are intermittent, and this is seen as a barrier to their wide utilization. The increasing grid integration of intermittent renewable energy sources generation significantly changes the scenario of distribution grid operations. Such operational challenges are minimized by the incorporation of the energy storage system, which plays an important role in improving the stability and the reliability of the grid. This study provides the review of the state-of-the-art in the literature on the economic analysis of battery energy storage systems. The paper makes evident the growing interest of batteries as energy storage systems to improve techno-economic viability of renewable energy systems; provides a comprehensive overview of key methodological possibilities for researchers interested in economic analysis of battery energy storage systems; indicates the need to use adequate economic indicators for investment decisions; and identifies key research topics... [more]

Nanoporous graphene membranes have drawn special attention in the gas-separation processes due to their unique structure and properties. The complexity of the physical understanding of such membrane designs restricts their widespread use for gas-separation applications. In the present study, we strive to propose promising designs to face this technical challenge. In this regard, we investigated the permeation and separation of the mixture of adsorptive gases CO2 and CH4 through a two-stage bilayer sub-nanometer porous graphene membrane design using molecular dynamics simulation. A CH4/CO2 gashouse mixture with 80 mol% CH4 composition was generated using the benchmarked force-fields and was forced to cross through the porous graphene membrane design by a constant piston velocity. Three chambers are considered to be feeding, transferring, and capturing to examine the permeation and separation of molecules under the effect of the two-stage membrane. The main objective is to investigate th... [more]

The energy-saving requirements for most buildings focus on improving the insulation and airtightness of a building’s envelope. In this paper, the authors have investigated the effect of additional internal insulation on energy consumption for heating and cooling in a residential building. Energy performance analyses were conducted for buildings with four internal thermal insulation systems in three locations using the WUFI Plus software. The Global Cost Method and Simply Pay Back Time have been used to assess and compare the economic viability of the retrofit systems. The results show that, in relation to energy, retrofitting with internal wall insulation can be an alternative to traditional external insulation. The assessment of internal insulation for low-energy buildings, however, cannot be conducted based on economic criteria. The usual approach of Simply Pay Back Time has exceptionally long payback time, which is unacceptable. In turn, the Global Cost Method, can only be used to c... [more]

Increasing converter power density is a problem of topical interest. This paper discusses an interleaved approach of the efficiency increase in the buck-boost stage of an inverter with unfolding circuit in terms of losses in semiconductors, output voltage ripples and power density. Main trends in the power converter development are reviewed. A losses model was designed and used for the proposed solution to find an optimal number of interleaved cells. It describes static and dynamic losses in semiconductor switches for buck and boost mode. The presented calculation results demonstrate the efficiency of the interleaved approach for photovoltaic system. 1 kW power converter prototype was designed with two parallel dc-dc cells for experimental verification of obtained theoretical results. The experimental results confirm theoretical statements.

Modern data centers are playing a pivotal role in the global economic situation. Unlike high-quality source of waste heat, it is challenging to recover the decentralized and low-quality waste heat sourced from data centers due to numerous technological and economic hurdles. As such, it is of the utmost importance to explore possible pathways to maximize the energy efficiency of the data centers and to utilize their heat recovery. Absorption chiller systems are a promising technology for the recovery of waste heat at ultra-low temperatures. In fact, the low temperature heat discharged from data centers cannot be retrieved with conventional heat recovery systems. Therefore, the present study investigated feasibility of waste heat recovery from data centers using an absorption chiller system, with the ultimate goal of electrical energy production. To fulfill this objective, a techno-economic assessment of heat recovery using absorption chiller (AC) technique for the data centers with powe... [more]

Nowadays, most Italian biogas produces electricity even though recent political incentives are promoting biomethane from biogas by “upgrading” it. The aim of this paper is to focus on the regulatory framework for producing biomethane from new or already-existent anaerobic digestion plants. The complexity and lack of knowledge of the regulations on biofuel production and of anaerobic digested biomethane from waste and by-products create difficulties of both interpretation and application. Consequently, the aim of this paper is to analyze the regulations for producing biomethane, underline the critical issues and opportunities, and evaluate whether an electrical plant built in the last 10 years in Italy can really be converted to a biomethane plant, thereby lengthening its lifespan. Three case studies were considered to look more closely into applying Italian biomethane incentives and to simulate the types of incentivization in agriculture with examples based on certain fuel types typica... [more]

Heat storage with thermochemical (TC) materials is a promising technology for solar energy storage. In this paper, a solar-driven desiccant evaporative cooling (DEC) system for air-conditioning is proposed, which converts solar heat energy into cooling with built-in daily storage. The system utilises thermochemical heat storage along with the DEC technology in a unique way. Magnesium Chloride (MgCl2·6H2O) has been used, which serves as both a desiccant and a thermochemical heat storage medium. The system has been designed for the subtropical climate of Lahore, Pakistan, for a bedroom with 8 h of cooling requirements during the night. MATLAB has been employed for modelling the system. The simulation results show that 57 kg of magnesium chloride is sufficient to meet 98.8% of cooling demand for the entire month of July at an elevated cooling requirement. It was found that the cooling output of the system increased with increasing heat exchanger effectiveness. The heat exchangers’ effecti... [more]

Biogas plants may support the transformation towards renewable-based and integrated energy systems by providing dispatchable co-generation as well as opportunities for biogas upgrading or power-to-X conversion. In this paper, a simulation model that comprises the main dynamics of the internal processes of a biogas plant is developed. Based on first-order kinetics of the anaerobic digestion process, the biogas production of an input feeding schedule of raw material can be estimated. The output of the plant in terms of electrical and thermal energy is validated against empirical data from a 3-MW biogas plant on the Danish island of Bornholm. The results show that the model provides an accurate representation of the processes within a biogas plant. The paper further provides insights on the functioning of the biogas plant on Bornholm as well as discusses upgrading potentials of biogas to biomethane at the plant from an energy perspective.

Piezoelectric energy harvesters have attracted much attention because they are crucial in portable industrial applications. Here, we report on a high-power device based on a magneto-mechanical piezoelectric energy harvester to scavenge the AC magnetic field from a power-line cable for industrial applications. The electrical output performance of the harvester (×4 layers) reached an output voltage of 60.8 Vmax, an output power of 215 mWmax (98 mWrms), and a power density of 94.5 mWmax/cm3 (43.5 mWrms/cm3) at an impedance matching of 5 kΩ under a magnetic field of 80 μT. The multilayer energy harvester enables high-output performance, presenting an obvious advantage given this improved level of output power. Finite element simulations were also performed to support the experimental observations. The generator was successfully used to power a wireless sensor network (WSN) for use on an IoT device composed of a temperature sensor in a thermal power station. The result shows that the magnet... [more]

For calculation of biological efficiency of a biogas plant (BP), it is required to determine the specific methane potential (SMP) of the substrate. A study comparing available methods for determination of SMP and the comparison with data of full-scale BPs is missing but necessary according to the differences in process conditions between both. Firstly, mass and mass associated energy balances of 33 full-scale BPs were calculated and evaluated. The results show plausible data for only 55% of the investigated BPs. Furthermore, conversion and yield efficiencies were calculated according to six different methods for SMP determination. The results show a correlation between the measured on-site specific methane yield and the calculated SMP by methods based on biological degradability. However, these methods underestimate the SMP. Calculated SMPs based on calorific values are higher, but less sensitive. A combination of biochemical and energetical methods is a promising approach to evaluate... [more]

Ocean thermal energy conversion (OTEC) uses a very simple process to convert the thermal energy stored mainly in tropical oceans into electricity. In designs, operations, and evaluations, we need to consider the unique characteristics of OTEC to achieve the best performance or lower the electricity cost of projects. The concept and design constraints of OTEC power generation differ from those of conventional thermal power plants due to the utilization of a low temperature difference. This research theoretically recognizes the unique characteristics of the energy conversion system and summarizes the appropriate performance evaluation methods for OTEC based on finite-time thermodynamics and the equilibrium condition of the heat source. In addition, it presents the concept of normalization of thermal efficiency for OTEC and exergy efficiency based on the available thermal energy in the ocean defined as the transferable thermal energy from the ocean and the equilibrium condition as the dea... [more]

Recent EU legislation enforces the integration of European balancing markets, with harmonized products and international platforms for the procurement and activation of reserves; nonetheless, different power balancing strategies remain. The Netherlands and Belgium encourage market participants to support balancing the control block by publishing real-time information. This article refers to such concepts as smart balancing, and a market simulation tool was developed to assess the relevant market parameters for effective smart balancing. This shall contribute to the true integration of real-time balancing energy markets. The scope of the assessment of relevant market parameters was Germany, and the results showed that a pricing scheme had less impact on the results, as currently is understood by European TSOs and regulators. Moreover, the accuracy and frequency of real-time publication indicate the effectiveness of smart balancing and the associated reduction of the activation of balanc... [more]

A converter valve unit, which converts Alternating Current (AC) to Directing Current (DC) and DC to AC, is one of the key elements of high voltage direct current (HVDC) transmission. The insulation design of a converter valve unit should be considered for air clearance according to the DC superimposed overvoltage and the insulator that maintains the insulation performance and the corona shield to suppress DC corona discharge. There is no prescribed standard for the insulation design of a converter valve unit. Moreover, insulation performance under an applied DC voltage has not yet been thoroughly investigated. Therefore, it is necessary to study the insulation design method of the converter valve unit. In this paper, consideration of the insulation design method on a ±200 kV converter valve unit in an HVDC converter hall is performed. The finite element method (FEM) is used to simulate the 3D model. Additionally, the safety factor (SF) is applied in accordance with the dielectric test... [more]

This study quantifies the potential of a 4.0 kW air source heat pump (ASHP) unit retrofitted to a 12.0 kW, 1000 L electric boiler coupled to a 1000 L storage tank. A data acquisition system was built to monitor the performance of the electric boiler and the ASHP water heater. The annual electrical energy saving and the load factor reduction from the electric boiler because of the ASHP unit retrofit was 34,805.94 kWh and 0.124. The net present value payback period of the ASHP system was 1.60 years. A Wilcoxon rank sum test was employed to compare both the volumes of hot water and electrical energy consumed by the two systems. Linear regression models of the daily volumes of hot water and electrical energy consumed by both systems were established. The results should be of great value to the management of universities that are considering energy-efficient interventions with a significant return on investment.

The reverse osmosis method has developed extremely rapidly in recent years and has become the most competitive seawater desalination technology in the world, and it has been widely used in all aspects. Large-scale reverse osmosis desalination plants cannot provide fresh water resources in areas with insufficient water resources and limited space. Therefore, this paper proposes a research plan for a small seawater desalination device based on reverse osmosis, which is mainly suitable for handling emergencies, disaster relief, desert areas and outdoor activities and other needs for timely freshwater resources. It mainly includes pretreatment modules, a reaction infiltration module, a post-processing module and an energy supply module. Detailed design calculations are carried out for the small-scale reverse osmosis membrane system, including the selection and quantity and arrangement of membranes. Subsequently, the one-stage two-stage small-scale reverse osmosis membrane system was modele... [more]