The latest class of engineered nanomaterials, viz., carbon quantum dots (CQDs), has attracted attention because they are synthesized through green chemical procedures and from organic waste matter. The synthesis of these nano-sized particles synthesized from biomass such as fruit peel and other organic matter results in mixtures of CQD species that differ in chemical identity, activity and photo-physical properties. Generally used collectively as chemically heterogeneous ensemble, they have already had an impact on multiple sectors of our environment by use as wastewater sensors, switches, model agro-fertilizers, and in biomedicine. The transitioning of their applications to crops is an important crossover point that calls for an accurate and detailed assessment of their genomic, proteomic, and metabolomics impact on agriculturally important crops and produce. We review the current status of CQDs vis-à-vis their impact on the biosphere via recent model studies and comment on the knowle... [more]

The effect of magnesium chloride as an additive of hydrothermal carbonization (HTC) of lignocellulosic biomass (Pinus radiata sawdust) was studied. The HTC tests were carried out at fixed conditions of temperature and residence time of 220 °C and 1 h, respectively, and varying the dose of magnesium chloride in the range 0.0−1.0 g MgCl2/g biomass. The carbonized product (hydrochar) was tested in order to determine its calorific value (HHV) while using PARR 6100 calorimeter, mass yield by gravimetry, elemental analysis using a LECO TruSpec elemental analyzer, volatile matter content, and ash content were obtained by standardized procedures using suitable ovens for it. The results show that using a dose of 0.75 g MgCl2/g biomass results in an impact on the mass yield that was almost equal to change operating conditions from 220 to 270 °C and from 0.5 to 1 h, without additive. Likewise, the calorific value increases by 33% for this additive dose, resulting in an energy yield of 68%, thus g... [more]

Methane is the central component of natural gas, which is globally one of the most abundant feedstocks. Due to its strong C−H bond, methane activation is difficult, and its conversion into value-added chemicals and fuels has therefore been the pot of gold in the industry and academia for many years. Industrially, halogenation of methane is one of the most promising methane conversion routes, which is why this paper presents a comprehensive review of the literature on methane activation by halogenation. Homogeneous gas phase reactions and their pertinent reaction mechanisms and kinetics are presented as well as microkinetic models for methane reaction with chlorine, bromine, and iodine. The catalysts for non-oxidative and oxidative catalytic halogenation were reviewed for their activity and selectivity as well as their catalytic action. The highly reactive products of methane halogenation reactions are often converted to other chemicals in the same process, and these multi-step processe... [more]

Background: Continuous non-invasive blood pressure (BP) measurement is a desired virtue in clinical practice. Unfortunately, current systems do not allow one for continuous, reliable BP measurement for more than a few hours per day, and they often require a complicated set of sensors to provide the necessary biosignals. Therefore we investigated the possibility of proposing a computational model that would predict the BP from pulse waves recorded in a single spot. Methods: Two experimental circuits were created. One containing a simple plastic tube for model development and a second with a silicone molded patient-specific arterial tree model. The first model served for the measuring of pulse waves under various BP (70−270 mmHg) and heart rate (60−190 beats per minute) values. Four different computational models were used to estimate the BP values from the diastolic time. The most accurate model was further validated using data from the latter experimental circuit containing a molded pa... [more]

Combined heat and power (CHP) systems are attracting increasing attention for their ability to improve the economics and sustainability of the electricity system. Determining how to best operate these systems is difficult because they can consist of many generating units whose operation is governed by complex nonlinear physics. Mathematical programming is a useful tool to support the operation of CHP systems, and has been the subject of substantial research attention since the early 1990s. This paper critically reviews the modeling and optimization work that has been done on the CHP economic dispatch problem, and the CHP economic and emission dispatch problem. A summary of the common models used for these problems is provided, along with comments on future modeling work that would beneficial to the field. The majority of optimization approaches studied for CHP system operation are metaheuristic algorithms. A discussion of the limitations and benefits of metaheuristic algorithms is give... [more]

Hydrocyclones are extensively known as important separation devices which are used in many industrial fields. However, the general method to estimate device performance is time-consuming and has a high cost. The aim of this paper was to investigate the blockage diagnosis for a lab-scale hydrocyclone using a vibration-based technique based on wavelet denoising and the discrete-time Fourier transform method. The results indicate that the farther away the installation location from feed inlet the more regular the frequency is, which reveals that the installation plane near to the spigot generated the regular frequency distribution. Furthermore, the acceleration amplitude under blockage degrees 0%, 50% and 100% fluctuates as a sine shape with increasing time, meanwhile the vibration frequency of the hydrocyclone rises with increasing throughput. Moreover, the distribution of four dimensional and five non-dimensional parameters for the time domain shows that the standard deviation, compared... [more]

Generally, the compression ignition (CI) engine that runs with emulsified biofuel (EB) or higher viscosity fuel experiences inferior performance and a higher emission compared to petro diesel engines. The modification is necessary to standard engine level in order to realize its application. This paper proposes a guide vane design (GVD), which needs to be installed in the intake manifold, is incorporated with shallow depth re-entrance combustion chamber (SCC) pistons. This will organize and develop proper in-cylinder airflow to promote better diffusion, evaporation and combustion processes. The model of GVD and SCC piston was designed using SolidWorks 2017; while ANSYS Fluent version 15 was utilized to run a 3D analysis of the cold flow IC engine. In this research, seven designs of GVD with the number of vanes varied from two to eight vanes (V2−V8) are used. The four-vane model (V4) has shown an excellent turbulent flow as well as swirl, tumble and cross tumble ratios in the fuel-injec... [more]

Coffee is one of the most popular beverages worldwide. Its effect on health is generally regarded as beneficial in many studies. However, there are growing concerns about the adverse effect of coffee consumption on cardiovascular disease (CVD) due to the potential aggravating impact on the cardiovascular system attributed to various compounds within coffee. This review is focused on deteriorative effects of coffee consumption on CVDs with possible mechanisms. Patients with risk factors of CVDs should prudently consider heavy consumption of coffee as it may exacerbate hypertension, dyslipidemia, and atherosclerosis, and increase the odds of cardiovascular events. J-shaped or U-shaped dose-response graphs of coffee consumption and CVD parameters partially explain the inconsistency of conclusions between coffee studies on CVD, highlighting a moderate intake of coffee. Moreover, there are discrepancies in results from clinical studies elucidating considerable influences of confounding fact... [more]

This paper presents an infrared infusion monitoring method based on data dimensionality reduction and a logistics classifier. In today’s social environment, nurses with hospital infusion work are under excessive pressure. In order to improve the information level of the traditional medical process, hospitals have introduced a variety of infusion monitoring devices. The current infusion monitoring equipment mainly adopts the detection method of infrared liquid drop detection to realize non-contact measurements. However, a large number of experiments have found that the traditional infrared detection method has the problems of low voltage signal amplitude variation and low signal-to-noise ratio (SNR). Conventional threshold judgment or signal shaping cannot accurately judge whether droplets exist or not, and complex signal processing circuits can greatly increase the cost and power consumption of equipment. In order to solve these problems, this paper proposes a method for the accurate m... [more]

Significant advancements in biotechnology have resulted in the development of numerous fundamental bioprocesses, which have consolidated research and development and industrial progress in the field. These bioprocesses are used in medical therapies, diagnostic and immunization procedures, agriculture, food production, biofuel production, and environmental solutions (to address water-, soil-, and air-related problems), among other areas. The present study is a first approach toward the identification of scientific and technological bioprocess trajectories within the framework of sustainability. The method included a literature search (Scopus), a patent search (Patentscope), and a network analysis for the period from 2010 to 2019. Our results highlight the main technological sectors, countries, institutions, and academic publications that carry out work or publish literature related to sustainability and bioprocesses. The network analysis allowed for the identification of thematic cluste... [more]

Oat husks are low-value lignocellulosic residues of oat processing that carry an environmental impact. Their polymers (cellulose, hemicellulose, and lignin) can be converted into a wide variety of value-added products; however, efficient pretreatment methods are needed that allow their fine separation for further tailored valorization. This study pioneered the use of milling-free and low acid-catalyzed ethanol organosolv for the delignification of oat husks, allowing their conversion into three high-quality streams, namely, glucan-rich, lignin-rich, and hemicellulosic compound-rich streams. Temperature, retention time, and solid-to-liquid ratio were found to impact the delignification of oat husks when using a one-factor-at-a-time strategy. The ideal conditions that were found (210 °C, 90 min, and solid-to-liquid ratio of 1:2) culminated into glucan and lignin fractions containing 74.5% ± 11.4% glucan and 74.9% ± 7.6% lignin, respectively. These high-purity lignin fractions open the po... [more]

Flavonoids are a group of plant constituents called phenolic compounds and correspond to the nonenergy part of the human diet. Flavonoids are found in vegetables, seeds, fruits, and beverages such as wine and beer. Over 7000 flavonoids have been identified and they have been considered substances with a beneficial action on human health, particularly of multiple positive effects because of their antioxidant and free radical scavenging action. Although several studies indicate that some flavonoids have provident actions, they occur only at high doses, confirming in most investigations the existence of anti-inflammatory effects, antiviral or anti-allergic, and their protective role against cardiovascular disease, cancer, and various pathologies. Flavonoids are generally removed by chemical methods using solvents and traditional processes, which besides being expensive, involve long periods of time and affect the bioactivity of such compounds. Recently, efforts to develop biotechnological... [more]

With the increasing penetration of the hybrid AC/DC microgrid in power systems, an inertia decrease of the microgrid is caused. Many scholars have put forward the concept of a virtual synchronous generator, which enables the converters of the microgrid to possess the characteristics of a synchronous generator, thus providing inertia support for the microgrid. Nevertheless, the problems of active power oscillation and unbalance would be serious when multiple virtual synchronous generators (VSGs) operate in the microgrid. To conquer these problems, a VSG-based autonomous power-frequency control strategy is proposed, which not only independently allocates the power grid capacity according to the load capacity, but also effectively suppresses the active power oscillation. In addition, by establishing a dynamic small-signal model of the microgrid, the dynamic stability of the proposed control strategy in the microgrid is verified, and further reveals the leading role of the VSG and filter i... [more]

The thermal pyrolysis of polystyrene (PS) is gaining importance as the social pressure for achieving a circular economy is growing; moreover, the recovery of styrene monomer in such a process is especially relevant. In this study, a simple thermal pyrolysis process in the temperature range of 390−450 °C is developed. A working hypothesis is that by using a nitroxide-end functionalized PS (PS-T or dormant polymer), the initiation process for the production of monomer (unzipping) during the PS pyrolysis could be enhanced due to the tendency of the PS-T to activate at the nitroxide end. Two types of PS were used in this work, the first one was synthesized by free-radical polymerization (FRP-dead polymer) and the second by nitroxide-mediated polymerization (NMP) using three levels of nitroxide to initiator ratio: 1.3, 1.1, and 0.9. Analysis of the recovered products of the pyrolysis by gas-mass spectroscopy shows that the yield of styrene increases from ∼33% in the case of dead polymer to... [more]

System identification has been a major advancement in the evolution of engineering. As it is by default the first step towards a significant set of adaptive control techniques, it is imperative for engineers to apply it in order to practice control. Given that system identification could be useful in creating a digital twin, this work focuses on the initial stage of the procedure by discussing simplistic system order identification. Through specific numerical examples, this study constitutes an investigation on the most “natural” method for estimating the order from responses in a convenient and seamless way in time-domain. The method itself, originally proposed by Ho and Kalman and utilizing linear algebra, is an intuitive tool retrieving information out of the data themselves. Finally, with the help of the limitations of the methods, the potential future outlook is discussed, under the prism of forming a digital twin.

Cancer is one of the most dangerous threats to human health and possibly the utmost task for current medicine. Currently, bio-based synthesis of nanoparticles from plants has gained much interest due to its potential medicinal applications. In the present study, a biological approach was employed for biogenic (green) synthesis of silver nanoparticles (AgNPs) using dried leaf extract of Asian spider flower (Asf). The biogenic synthesis of Asf-AgNPs (Asian spider flower-Silver nanoparticles) was established using ultra violet-visible (UV-vis) spectra which exhibited a wide superficial plasmon resonance of AgNPs at 445 nm. These nanoparticles clearly showed the formation of poly-disperse crystalline solids (spherical shape) with particle size range of <50 nm based on observation under a transmission electron microscope (TEM). Infrared spectroscopy (FTIR) revealed carboxylic acids (C = O stretch) known to act as a capping agent and a reductant in plant extracts. Elemental silver signal... [more]

Both cold and flame jets find numerous applications in different fields, ranging from domestic applications to aerospace and space technology. Indeed, the applications of isothermal and non-isothermal jets in the flame heating industry fascinated the researchers to gain an in-depth understanding. Nevertheless, these benefits are not standalone, rather, they are associated with major disadvantages such as improper jet mixing and flame instabilities that require careful remedies. In the present investigation, three-inline jets, having methane jet at the center and two oxygen jets at the periphery, are studied computationally in a three-dimensional domain, with and without considering the effects of combustion. To study the mixing characteristics of cold jets, the radial velocity distributions at different streamwise locations have been analyzed at the jet inlet velocity of 27 m/s. However, for oxygen and methane flame jets, inlet velocities are varied as 27 m/s and 54 m/s. Moreover, to i... [more]

This work presents the effects of variable wall permeability on two-dimensional flow and heat transfer in a leaky narrow channel containing water-based nanoparticles. The nanofluid is absorbed through the walls with an exponential rate. This situation arises in reverse osmosis, ultrafiltration, and transpiration cooling in industry. The mathematical model is developed by using the continuity, momentum, and energy equations. Using stream function, the transport equations are reduced and solved by using regular perturbation method. The expressions for stream function and temperature distribution are established, which helps in finding the components of velocity, wall shear stress, and heat transfer rate inside the channel. The results show that velocity components, temperature, wall shear stress, and rate of heat transfer are minimum at the entrance region due to the reabsorption of fluid containing nanoparticles. Additionally, with increasing volume fraction of nanoparticles, the rate o... [more]

The study provides comprehensive information on the vacuum impregnation process applied to plant materials. It aims (in traditional applications) to ensure impermeability and elimination of porosity of various materials. The process substantially accelerates mass transfer in the liquid−solid system. The study describes the course of the process and accompanying phenomena as well its effects on plant tissues. The aim of the investigations was to determine the impact of some impregnation parameters (pressure, pressure change rate, vacuum maintenance time, relaxation time, and the coefficient of impregnating liquid viscosity) and the mode of impregnation (wet, dry, cyclic wet) on the degree of filling the plant tissue with the impregnating solution. Jonagold apples were used as the study material. The investigations have revealed that changes in the vacuum impregnation parameters (vacuum maintenance time, relaxation time, pressure change rate in the system) and the impregnation method do... [more]

The integrated energy system is a vital part of distributed energy industries. In addition to this, the optimal economic dispatch model, which takes into account the complementary coordination of multienergy, is an important research topic. Considering the constraints of power balance, energy supply equipment, and energy storage equipment, a basic model of optimal economic dispatch of an integrated energy system is established. On this basis, a multiobjective function solving algorithm of NSGA-II, based on tent map chaos optimization, is proposed. The proposed model and algorithm are applied. The simulation results show that the optimal economic scheduling model of the integrated energy system established in this paper can provide a more economic system operation scheme and reduce the operation cost and risks associated with an integrated energy system. The Non-dominated Sorting Genetic Algorithm-II (NSGA-II) multiobjective function solving algorithm, based on tent map chaos optimizati... [more]

Sulfur compounds are removed from petroleum by the addition of sodium hydroxide at a very high concentration. As a result, a residue called spent soda or spent caustic is generated, being extremely aggressive to the environment. In this work, the chemical properties of this residue are described in detail. The sodium hydroxide remains that have not reacted, sulfur compounds, and organic matter are the primary pollutants reported. Additionally, the main characteristics of the methods of treatment used to reduce them are described. This review comes from comprehensive and updated research and bibliographic analysis about the investigation on the topic. The advantages and disadvantages of the different treatment methods are highlighted. We established some criteria to set out when assessing the application of each one of these treatments is considered.

Since the observation of direct interspecies electron transfer (DIET) in anaerobic mixed cultures in 2010s, the topic “DIET-stimulation” has been the main route to enhance the performance of anaerobic digestion (AD) under harsh conditions, such as high organic loading rate (OLR) and the toxicants’ presence. In this review article, we tried to answer three main questions: (i) What are the merits and strategies for DIET stimulation? (ii) What are the consequences of stimulation? (iii) What is the mechanism of action behind the impact of this stimulation? Therefore, we introduced DIET history and recent relevant findings with a focus on the theoretical advantages. Then, we reviewed the most recent articles by categorizing how DIET reaction was stimulated by adding conductive material (CM) and/or applying external voltage (EV). The emphasis was made on the enhanced performance (yield and/or production rate), CM type, applied EV, and mechanism of action for each stimulation strategy. In add... [more]

Bacterial cellulose as polysaccharide possessing outstanding chemical purity and a unique structure compared with wood cellulose, attracts great attention as a hydrocolloid system. It was shown, that at intense mechanical action on a neat bacterial cellulose film in presence of water, the gel-like dispersions are obtained. They retain stability in time (at least, up to several months) and temperature (at least, up to 60 °C) without macro-phase separation on aqueous and cellulose phases. The main indicator of the stability is constant viscosity values in time, as well as fulfilling the Arrhenius dependence for temperature dependence of viscosity. Flow curves of diluted dispersions (BC content less than 1.23%) show strong non-Newtonian behavior over the entire range of shear rates. It is similar with dispersions of micro- and nanocrystalline cellulose, but the absolute viscosity value is much higher in the case of BC due to more long fibrils forming more dense entanglements network than... [more]

Struvite crystallization using fluidized bed reactors (FBRs) is one of the most commonly used methods for nutrient recovery from different waste streams. However, struvite recovery from swine wastewater containing much higher solids using FBR has not been studied extensively. In this study, we therefore designed and optimized the key operating conditions parameters, i.e., pH (9.0, 9.5, and 10.0), circulation rate (CR) (1.5, 3.0, and 4.5 L/Lreactor·h), and hydraulic retention time (HRT) (1, 3, and 5 h) of FBR to ensure efficient nutrient removal and struvite crystallization from swine wastewater using response surface methodology (RSM) with central composite design (CCD) as experimental design. A magnesium/phosphorus (Mg/P) molar ratio of 1.3 was maintained with MgCl2 according to ortho-phosphate (O-P) concentration of influent and an air diffuser was set to supply air with 0.03 L air/Lreactor·min. The O-P recovery efficiency of over 91% was achieved through the entire runs. Among the o... [more]

The early stage of corrosion formation on X70 pipeline steel under oxyfuel atmosphere was investigated by applying a simulated gas mixture (CO2 containing 6700 ppmv O2, 100 ppmv NO2, 70 ppmv SO2 and 50 ppmv H2O) for 15 h at 278 K and ambient pressure. Short-term tests (6 h) revealed that the corrosion starts as local spots related to grinding marks progressing by time and moisture until a closed layer was formed. Acid droplets (pH 1.5), generated in the gas atmosphere, containing a mixture of H2SO4 and HNO3, were identified as corrosion starters. After 15 h of exposure, corrosion products were mainly X-ray amorphous and only partially crystalline. In-situ energy-dispersive X-ray diffraction (EDXRD) results showed that the crystalline fractions consist primarily of water-bearing iron sulfates. Applying Raman spectroscopy, water-bearing iron nitrates were detected as subordinated phases. Supplementary long-term tests exhibited a significant increase in the crystalline fraction and format... [more]