Conventional energy sources often do not fully satisfy the needs of a modern economy, especially given the climate changes associated with them. These issues should be addressed by diversification of energy generation, including the development of renewable energy sources (RES). Solid biomass will play a major part in the process in Poland. The function of rural areas, along with a well-developed agricultural and forest economy sector, will be a key aspect in this as these areas are suitable for solid biomass acquisition in various ways. This study aimed to determine the solid biomass energy potential in the commune of Goworowo to illustrate the potential in the smallest administrative units of Poland. This research determined the environmental and natural conditions in the commune, which helped to identify the crucial usable solid biomass resources. The total energy potential of solid biomass resources in the commune of Goworowo amounted to 97,672 GJ y−1. The highest potential was acc... [more]

The main contribution of this article is to propose a compact explicit scheme for solving time-dependent partial differential equations (PDEs). The proposed explicit scheme has an advantage over the corresponding implicit compact scheme to find solutions of nonlinear and linear convection−diffusion type equations because the implicit existing compact scheme fails to obtain the solution. In addition, the present scheme provides fourth-order accuracy in space and second-order accuracy in time, and is constructed on three grid points and three time levels. It is a compact multistep scheme and conditionally stable, while the existing multistep scheme developed on three time levels is unconditionally unstable for parabolic and considered a type of equations. The mathematical model of the heat transfer in a mixed convective radiative fluid flow over a flat plate is also given. The convergence conditions of dimensionless forms of these equations are given, and also the proposed scheme solves... [more]

Implementation of alternative energy supply solutions requires the broad involvement of local communities. Hence, smart energy solutions are primarily investigated on a local scale, resulting in integrated community energy systems (ICESs). Within this framework, the distributed generation can be optimally utilised, matching it with the local load via storage and demand response techniques. In this study, the boat demand flexibility in the Ballen marina on Samsø—a medium-sized Danish island—is analysed for improving the local grid operation. For this purpose, suitable electricity tariffs for the marina and sailors are developed based on the conducted demand analysis. The optimal scheduling of boats and battery energy storage system (BESS) is proposed, utilising mixed-integer linear programming. The marina’s grid-flexible operation is studied for three representative weeks—peak tourist season, late summer, and late autumn period—with the combinations of high/low load and photovoltaic (PV... [more]

Under marginal-cost pricing, some generators cannot recover their production costs at the market price due to non-convexities in the electricity market. For this reason, most electricity markets pay side-payments to generators whose costs are not sufficiently recovered, but side-payments present the problem of deteriorating transparency in the market. Recently, convex hull pricing and extended locational marginal pricing have been reviewed or gradually introduced to reduce side-payments. Another method is to include non-convex costs in the market price, which is applied in the Korean electricity market. Although it is not generally considered in the electricity market, the Vickrey auction method is also one of the pricing mechanisms that can reduce side-payments. The main purpose of this study is to analyze the financial impact of these alternative pricing mechanisms on market participants through rigorous simulation. We applied the alternative pricing schemes to the Korean electricity... [more]

Estimation and control of wheel slip is a critical consideration in preventing loss of traction, minimizing power consumptions, and reducing soil disturbance. An approach to wheel slip estimation and control, which is robust to sensor noises and modeling imperfection, has been investigated in this study. The proposed method uses a simplified form of wheels longitudinal dynamic and the measurement of wheel and vehicle speeds to estimate and control the optimum slip. The longitudinal wheel forces were estimated using a robust sliding mode observer. A straightforward and simple interpolation method, which involves the use of Burckhardt tire model, instantaneous values of wheel slip, and the estimate of longitudinal force, was used to determine the optimum slip ratio that guarantees maximum friction coefficient between the wheel and the road surface. An integral sliding mode control strategy was also developed to force the wheel slip to track the desired optimum value. The algorithm was te... [more]

Vegetation encroachment along electric power transmission lines is one of the major environmental challenges that can cause power interruption. Many technologies have been used to detect vegetation encroachment, such as light detection and ranging (LiDAR), synthetic aperture radar (SAR), and airborne photogrammetry. These methods are very effective in detecting vegetation encroachment. However, they are expensive with regard to the coverage area. Alternatively, satellite imagery can cover a wide area at a relatively lower cost. In this paper, we describe the statistical moments of the color spaces and the textural features of the satellite imagery to identify the most effective features that can increase the vegetation density classification accuracy of the support vector machine (SVM) algorithm. This method aims to distinguish between high- and low-density vegetation regions along the power line corridor right-of-way (ROW). The results of the study showed that the statistical moments... [more]

In large substations, many lightning rods are installed on multi-grounded frames. The lightning rods, the frame, the grounding grid and the soil form a whole body, and the lightning current will be discharged from many grounding points. In this paper, based on the partial element equivalent circuit method, a numerical model, in the time domain, is developed to simulate the lightning-caused electromagnetic transients on the frame and the grounding grid. The model is verified by field testing and by comparison with commercial software. The model has several features: (1) it has a simple time domain form; (2) it is stable due to a staggered arrangement of space and time variables and an implicit difference scheme used, and (3) the dimension of the equations is relatively small because the unknown variables are divided into several groups, which are calculated one by one. With this method, the transient characteristics of the grounding grid with lightning rods on the frame are calculated,... [more]

This study provides a techno-financial evaluation of two sites in Malaysia: Kudat, located on the coast of the northernmost part of Sabah, the state of East Malaysia with promising wind potential, and Putrajaya in the Klang Valley region with moderate wind potential at high elevations similar to the dominant cities in Malaysia. Three small-scale wind turbines were evaluated, taking into account a nominal electrical power generation below 100 kW. The research is focused on 220 residential households. The software used to perform the evaluation was Hybrid Optimization of Multiple Energy Resources (HOMER). The research novelty is the examination of the non-hybrid small-scale turbines at high elevations for regions with low wind speed, such as Malaysia. Regardless of the wind farms’ financial profit, this study used the net present cost (NPC) analysis in all cases. This research demonstrates the feasibility of small-scale wind turbines mounted at high elevations for generating sufficient e... [more]

The negative effect of liquid and gaseous fuel combustion is toxic gases (i.e., carbon and nitrogen oxides NOx) and particulate matter (PM) formation. The content of harmful and toxic components of exhaust gases is strongly dependent on the quality and type of burnt fuel. Experimental research is required to verify the use of current technical and technological solutions for the production of electricity on farms, using various types of conventional fuels and biofuels. The aim of the current research was to comprehensively verify the use of commonly available fuels and biofuels without adapting the internal combustion engine. Gaseous fuels—propane-butane mixture (LPG), compressed natural gas (CNG) and biogas (BG)—were added to liquid fuels—methyl esters of higher fatty acids (RME) and diesel fuel (DF)—in six different power configurations to evaluate the effect on the emission of toxic gases: carbon monoxide (CO), nitric oxide (NO), nitric dioxide (NO2) and particulate matter (PM), and... [more]

Even with modern smart metering systems, erroneous measurements of the real and reactive power in the power system are unavoidable. Multiple erroneous parameters and measurements may occur simultaneously in the state estimation of a bulk power system. This paper proposes a gross error reduction index (GERI)-based method as an additional module for existing state estimators in order to identify multiple erroneous parameters and measurements simultaneously. The measurements are acquired from a supervisory control and data acquisition system and mainly include voltage amplitudes, branch current amplitudes, active power flow, and reactive power flow. This method uses a structure consisting of nested two loops. First, gross errors and the GERI indexes are calculated in the inner loop. Second, the GERI indexes are compared and the maximum GERI in each inner loop is associated with the most suspicious parameter or measurement. Third, when the maximum GERI is less than a given threshold in the... [more]

This paper presents the comprehensive analysis of the sub-microwave, radio frequency band resonant metastructures’ electromagnetic properties with a particular emphasis on the possibility of their application in energy harvesting systems. Selected structures based on representative topologies of metamaterials have been implemented in the simulation environment. The models have been analyzed and their substitute average electromagnetic parameters (absorption, reflection, transmission and homogenized permeability coefficients) have been determined. On the basis of simulation research, prototypes of electromagnetic field two-dimensional absorbers have been manufactured and verified experimentally in the proposed test system. The absorber has been implemented as a component of the low-cost energy harvesting system with a high-frequency rectifier and a voltage multiplier, obtaining usable DC energy from the electromagnetic field in certain frequency bands. The energy efficiency of the syste... [more]

This paper presents issues related to the adaptive control of the drive system with an elastic clutch connecting the main motor and the load machine. Firstly, the problems and the main algorithms often implemented for the mentioned object are analyzed. Then, the control concept based on the RNN (recurrent neural network) for the drive system with the flexible coupling is thoroughly described. For this purpose, an adaptive model inspired by the Elman model is selected, which is related to internal feedback in the neural network. The indicated feature improves the processing of dynamic signals. During the design process, for the selection of constant coefficients of the controller, the PSO (particle swarm optimizer) is applied. Moreover, in order to obtain better dynamic properties and improve work in real conditions, one model based on the ADALINE (adaptive linear neuron) is introduced into the structure. Details of the algorithm used for the weights’ adaptation are presented (including... [more]

Bottom-fixed offshore wind turbines are generally built on continental-shelf sections that are morphodynamically active due to their shallow depths and severe wave and current conditions. Such sites are commonly protected against scour to prevent the loss of structural stability. Scour protection can be designed using static or dynamic solutions. Designing dynamic protection requires experimental validation, especially for singular or unconventional structures. This article presents an experimental method for the laboratory analysis of scour protection for jacket foundations placed at morphodynamically active sites. The test campaign was conducted within the project East Anglia ONE (UK) as part of the asset owner studies and aimed to evaluate operation and maintenance (O&M) aspects, independent of the contractor’s original design assessments. The physical experiments explored morphodynamic changes on the sea bottom and their importance to scour protection, as well as the importance of... [more]

Rotating detonation rocket engines (RDREs) exhibit various unsteady phenomena, including modal transitions, that significantly affect their operation, performance and stability. The dynamics of the detonation waves are studied during a descending modal transition (DMT) where four co-rotating detonations waves decrease to three in a gaseous methane-oxygen RDRE. Detonation wave tracking is applied to capture, visualize and analyze unsteady, 3D detonation wave dynamics data within the combustion chamber of the RDRE. The mechanism of a descending modal transition is the failure of a detonation wave in the RDRE, and in this study, the failing wave is identified along with its failure time. The regions upstream of each relative detonation show the mixture and flow-field parameters that drive detonation failure. Additionally, it is shown that descending modal transitions encompass multiple phases of detonation decay and recovery with respect to RDREs. The results show high upstream pressure,... [more]

Recent trends in building energy systems such as local renewable energy generation have created a distinct demand for energy storage systems to reduce the influence and dependency on the electric power grid. Under the current market conditions, a range of commercially available residential energy storage systems with batteries has been produced. This paper addresses the area of energy storage systems from multiple directions to provide a broader view on the state-of-the-art developments and trends in the field. Present standards and associated limitations of storage implementation are briefly described, followed by the analysis of parameters and features of commercial battery systems for residential applications. Further, the power electronic converters are reviewed in detail, with the focus on existing and perspective non-isolated solutions. The analysis covers well-known standard topologies, including buck-boost and bridge, as well as emerging solutions based on the unfolding inverte... [more]

Multi-Use Platform (MUP) is a new topic addressed, extensively, under the EU funded projects that aim to exploit oceans in a sustainable way in order to reduce the costs of marine energy and to extract seafood. MUP’s electrical grid experiences many challenges, being offshore. One of these challenges is that only Alternating Current (AC) systems are considered which are inefficient, expensive and require bulky components. Considering the advantages of Direct Current (DC) systems, this paper aims to study the feasibility of using the DC system to improve the electrical infrastructure of the MUP’s grid. Floating energy unit comprising tidal, wind and solar energy resources is considered as a base unit for the MUP’s grid. The paper proposes a new distributed controller for grid voltage regulation and minimizing circulating current among parallel-connected floating energy units in an offshore Low Voltage Direct Current (LVDC) microgrid. A mathematical model is derived for n-parallel floati... [more]

This work deals with metaheuristic optimization algorithms to derive the best parameters for the Gaussian Adaptive PID controller. This controller represents a multimodal problem, where several distinct solutions can achieve similar best performances, and metaheuristics optimization algorithms can behave differently during the optimization process. Finding the correct proportionality between the parameters is an arduous task that often does not have an algebraic solution. The Gaussian functions of each control action have three parameters, resulting in a total of nine parameters to be defined. In this work, we investigate three bio-inspired optimization methods dealing with this problem: Particle Swarm Optimization (PSO), the Artificial Bee Colony (ABC) algorithm, and the Whale Optimization Algorithm (WOA). The computational results considering the Buck converter with a resistive and a nonlinear load as a case study demonstrated that the methods were capable of solving the task. The re... [more]

Membraneless microfluidic fuel cells (MMFCs) are being studied extensively as an alternative to batteries and conventional membrane fuel cells because of their simple functioning and lower manufacturing cost. MMFCs use the laminar flow of reactant species (fuel and oxidant) to eliminate the electrolyte membrane, which has conventionally been used to isolate anodic and cathodic half-cell reactions. This review article summarizes the MMFCs with six major categories of flow configurations that have been reported from 2002 to 2020. The discussion highlights the critical factors that affect and limit the performance of MMFCs. Since MMFCs are diffusion-limited, most of this review focuses on how different flow configurations act to reduce or modify diffusive mixing and depletion zones to enhance the power density output. Research opportunities are also pointed out, and the challenges in MMFCs are suggested to improve cell performance and make them practical in the near future.

In this work, simulations were performed to optimize the parameters of a lead-free perovskite/silicon tandem solar cell for the improved efficiency and stability of commercial devices. The top sub-cell is based on a lead-free perovskite with a large bandgap of 1.8 eV, an electron transport layer of SnO2/PCBM, which is known for its anti-hysteresis effect, and a hole transport layer of NiO to improve stability, whereas the bottom sub-cell is based on n-type silicon to increase the efficiency of the whole cell. First, the two sub-cells were simulated under standalone conditions for calibration purposes. Then, the current matching condition was obtained by optimizing the thicknesses of the absorber layers of both sub-cells and the doping concentration of the back surface field (BSF) layer of the silicon sub-cell. As a result of this optimization phase, thicknesses of 380 nm and 20 µm for the top and bottom sub-cells, respectively, and a doping concentration of 1022 cm−3 were used in the c... [more]

In order to comprehensively control the corner separation and the blade trailing edge (TE) separation in a high-turning compressor stator cascade, this research proposes a new combined slotted configuration consisting of one full-span slot and two blade-end slots. Taking into account the effect of the blade solidity, the performance of the original cascade and the combined slotted cascade was calculated and evaluated in a wide incidence angle range at two blade solidities. The results indicated that the blade loading and the corner separation range of the original cascade becomes larger as the blade solidity decreases from 1.66 to 1.36, which leads to higher total pressure loss and lower pressure diffusing capacity under positive incidence angles. The low-momentum fluid in the boundary layer can be significantly re-energized by the high-momentum blade-end and full-span slots jets, hence the combined slotted configuration can eliminate the blade TE separation and reduce the corner separ... [more]

In analogy to electricity transmission networks, this paper analyzes the concept of supra-regional district heating networks (SR-DHN), connecting a large number of actors. Using a back-casting approach, a SR-DHN is assumed to exist and thus, implementation challenges, such as economic feasibility and energy losses, are circumvented in the first step (but are analyzed in the discourse). The paper then analyzes, in an interdisciplinary qualitative manner and supported by a case study, what technical, operational, economic and legal issues must have been resolved. Results show that the heat transmission network, being the backbone of the SR-DHN, is an expensive infrastructure, but is likely to become economic in a non-fossil energy system. By decreasing the reliance on single waste heat sources, SR-DHN allows longer payback periods and can thus be an enabler for using industrial waste heat. However, involving many actors requires comprehensive contractual foundations. The derived hypothes... [more]

In the two-step method for nuclear reactor simulation, lattice physics calculations are performed to compute homogenized cross-sections for a variety of burnups and lattice configurations. A nodal code is then used to perform full-core analysis using the pre-calculated homogenized cross-sections. One source of uncertainty introduced in this method is that the lattice configuration or depletion conditions typically do not match a pre-calculated one from the lattice physics simulations. Therefore, some interpolation model must be used to estimate the homogenized cross-sections in the nodal code. This current study provides a methodology for sensitivity analysis to quantify the impact of state variables on the homogenized cross-sections. This methodology also allows for analyses of the historical effect that the state variables have on homogenized cross-sections. An application of this methodology on a lattice for the Westinghouse AP1000® reactor is presented where coolant density, fuel t... [more]

The fine particulate matter (PM) emitted from jet aircraft poses a serious threat to the environment and human health which can be mitigated by using biofuels. This paper aims to quantify PM emissions from a small turbofan fueled with the alcohol to jet (ATJ) synthetic kerosene and its various blends (5%, 20%, and 30% of ATJ) with Jet A-1 fuel. Emissions from a turbofan engine (DGEN 380) with a high bypass ratio, applicable in small private jets, were studied. Among the four fuels tested, the PM-number emission index (EIN) was the lowest for the ATJ 30% blend. EIN for ATJ 30% dropped from 1.1 × 1017 to 4.7 × 1016 particles/kg of fuel. Burning alternative fuel blends reduced the particle mass emissions over the entire range of fuel flow by at least 117 mg/kg of fuel. The particles formed in the nucleation mechanism dominate PM emission, which is characteristic of jet engines. Thus, number-based particle size distributions (PSDs) exhibit a single mode log-normal distribution. The highest... [more]

Cellulosic ethanol (CE) can not only be produced from a nonedible, cheap, and abundant lignocellulose feedstock but also can reduce carbon footprint significantly compared to starch ethanol. Despite great stimulation worldwide, CE production has not yet commercialized because of the complexity of lignocellulose. Therefore, intensive research and development are needed to improve CE technologies. In this study, a cost-efficient and sustainable design was proposed for the coproduction of CE, heat, and electricity from the actual lignocellulosic fermentation broth. First, a conventional coproduction process of CE, heat, and electricity based on hybrid distillation and adsorption (HDA) was simulated and optimized. Subsequently, various heat integrated (HI) techniques such as heat pump (HP), multi-effect distillation (MED), and combined HP-MED were evaluated to improve the CE process. The combined heat and power (CHP) process that utilized the combustible solids of the beer stillage was des... [more]

Pile heat exchangers offer a cost effective route to implementation of ground-source heat pump systems for many large commercial buildings compared with traditional boreholes. Such projects typically use thermal response tests to determine the key input parameters for system design, namely soil thermal conductivity and heat exchanger thermal resistance. However, this brings challenges for pile heat exchanger based systems, where in situ thermal response tests are known to be less reliable due to the large thermal capacity of the pile. This paper presents a new “black box” resistance capacitive model for applications to pile thermal response tests. The approach is tested against case study data and shown to perform well. Additional test duration savings are shown to be possible if a novel combination of borehole and pile thermal response tests is applied together to determine design parameters.