Cities play a key role in driving the transition to sustainable energy. Urban areas represent between 60% and 80% of global energy consumption and are a significant source of CO2 emissions, making energy management at the urban scale an important area of research. Urban energy systems have a strong influence on the environment, economy, social dimensions and urban spatial planning. Energy consumption affects the urban microclimate, urban comfort, human health, and conversely, urban physical, economic and social characteristics affect the energy urban profile. In order to improve the quality of energy strategies, policies, and plans, local authorities need decision support tools, like energy potential mapping, which have risen significance in the last decades. Energy data are crucial for those tools. They can increase the quality and effectiveness of energy planning but also support the integration between energy and spatial planning. Energy data can also stimulate citizen engagement as... [more]

A model suitable to obtain where and when renewable energy sources (RES) should be allocated as part of generation planning in distribution systems is formulated. The proposed model starts from an existing two-stage stochastic mixed-integer linear programming (MILP) problem including investment and scenario-dependent operation decisions. The aim is to minimize photovoltaic and wind investment costs, operation costs, as well as total substation costs including the cost of the energy bought from substations and energy losses. A new Benders’ decomposition framework is used to decouple the problem between investment and operation decisions, where the latter can be further decomposed into a set of smaller problems per scenario and planning period. The model is applied to a 34-bus system and a comparison with a MILP model is presented to show the advantages of the model proposed.

Reliable transmission expansion planning is critical to power systems’ development. To make reliable and sustainable transmission expansion plans, numerous sources of uncertainty including demand, generation capacity, and fuel cost must be taken into consideration in both spatial and temporal dimensions. This paper presents a new approach to selecting a small number of high-quality scenarios for transmission expansion. The Kantorovich distance of social welfare distributions was used to assess the quality of the selected scenarios. A case study was conducted on a power system model that represents the U.S. Eastern and Western Interconnections, and ten high-quality scenarios out of a total of one million were selected for two transmission plans. Results suggested that scenarios selected using the proposed algorithm were able to provide a much more accurate estimation of the value of transmission plans than other scenario selection algorithms in the literature.

The Coefficient of Performance of an ordinary water-cooled chiller is presented as a relationship with the chiller load factor and cooling water temperature. However, the cooling water temperature fluctuates according to the processed heat of the cooling tower originating in the cooling energy of the chiller and to the outside temperature and humidity. It is therefore difficult to obtain the cooling water temperature under the processed-heat and weather conditions at the time of evaluation. This, in turn, makes it difficult to determine the Coefficient of Performance of a water-cooled chiller at the evaluation time. In this research, we formulated the Coefficient of Performance of a water-cooled chiller as a relationship with the chiller load factor and specific enthalpy of outside air. Specifically, we used the Number of Transfer Units (NTU) model of a cooling tower to calculate the cooling water temperature corresponding to the cooling-tower load factor targeting a counterflow coolin... [more]

This paper addresses economic aspects of heat savings in the context of strategic heat planning. The analysis uses the city of Aalborg, Denmark, as a case where municipalisation through a recent acquisition of a coal-fired cogeneration of heat and power (CHP) plant has made an update of a municipal strategic energy plan necessary. Combining datasets on buildings and insulation techniques with economic methods, we investigate how the local district heating tariff can be adapted to improve the conditions for heat savings and support the transition to lower supply temperatures in line with the requirements of future fourth generation district heating systems. The paper concludes that implementing a fully variable heat tariff scheme improves the financial incentive for heat savings, while also making the system development less vulnerable to fluctuations and shortages in capital markets. The paper supplements existing literature on heat savings with novelty in its approach and in its syste... [more]

The number of electric vehicles (EV) in the world has been increasing and is gaining momentum. The large-scale use of EVs in public life has initiated the need to establish EV battery charging services within the power system. Currently, EVs serve as a transportation tool and also as a flexible load. This publication examines the possibility of the owner of an electric vehicle choosing a battery recharging point, as well as of the involvement of several decision makers in the selection of a charging schedule. This problem is important because we assume that a significant proportion of EVs mainly use two parking spaces, one located close to the place of residence and another close to the workplace. We accept and prove that a car charging station can be created by the employer (company) and implemented in the best interests of the employer and the employee (EV owner). For that, a coalition between the company and the EV owner has to be formed. To support rational decisions, this study so... [more]

Heat pumps in combination with a photovoltaic system are a very promising option for the transformation of the energy system. By using such a system for coupling the electricity and heat sectors, buildings can be heated sustainably and with low greenhouse gas emissions. This paper reveals a method for dimensioning a suitable system of heat pump and photovoltaics (PV) for residential buildings in order to achieve a high level of (photovoltaic) PV self-consumption. This is accomplished by utilizing a thermal energy storage (TES) for shifting the operation of the heat pump to times of high PV power production by an intelligent control algorithm, which yields a high portion of PV power directly utilized by the heat pump. In order to cover the existing set of building infrastructure, 4 reference buildings with different years of construction are introduced for both single- and multi-family residential buildings. By this means, older buildings with radiator heating as well as new buildings w... [more]

In most demand response (DR) based residential load management systems, shifting a considerable amount of load in low price intervals reduces end user cost, however, it may create rebound peaks and user dissatisfaction. To overcome these problems, this work presents a novel approach to optimizing load demand and storage management in response to dynamic pricing using machine learning and optimization algorithms. Unlike traditional load scheduling mechanisms, the proposed algorithm is based on finding suggested low tariff area using artificial neural network (ANN). Where the historical load demand individualized power consumption profiles of all users and real time pricing (RTP) signal are used as input parameters for a forecasting module for training and validating the network. In a response, the ANN module provides a suggested low tariff area to all users such that the electricity tariff below the low tariff area is market based. While the users are charged high prices on the basis of... [more]

The unbalanced distribution of resource and consuming centers in China has prompted the AC/DC hybrid transmission technology. The maintenance scheduling of an AC/DC hybrid transmission network is the key technology to ensure its safety and reliability. In this study, the mutual influence mechanism of an AC/DC system in a maintenance period was analyzed in detail. The overhead transmission line and transformer are key equipment within an AC/DC hybrid transmission network, and an optimization model of the key equipment maintenance scheduling was established. The objective of the model was to improve the system reliability during the maintenance scheduling. By considering the constraints of maintenance cost, maintenance resources, and maintenance workload, the maintenance scheduling of overhead transmission lines and transformer branches was obtained. The over-limit situation of power flow and the weakness of the system during the maintenance period was evaluated. The “double-layer substi... [more]

The growing share of renewable energy makes the optimization of power flows in power system models computationally more complicated, due to the widely distributed weather-dependent electricity generation. This article evaluates two methods to reduce the temporal complexity of a power transmission grid model with storage expansion planning. The goal of the reduction techniques is to accelerate the computation of the linear optimal power flow of the grid model. This is achieved by choosing a small number of representative time periods to represent one whole year. To select representative time periods, a hierarchical clustering is used to aggregate either adjacent hours chronologically or independently distributed coupling days into clusters of time series. The aggregation efficiency is evaluated by means of the error of the objective value and the computational time reduction. Further, both the influence of the network size and the efficiency of parallel computation in the optimization p... [more]

Planning the operation scheduling with optimization heuristic algorithms allows microgrids to have a convenient tool. The developments done in this study attain this scheduling taking into account the impact of energy storage useful life in the microgrid operation. The scheduling solutions, proposed for the answer of an optimization problem, are obtained by using a metaheuristic algorithm called Differential Evolutionary Particle Swarm Optimization (DEEPSO). Thanks to the optimization that is conducted in this study, it is possible to formulate dispatches of the existent microgrid (MG) by always looking for the ideal dispatch that implies a lower cost and provides a greater viability to any project related to renewable energy, electric vehicles and energy storage. These advances oblige the battery manufacturers to start looking for more powerful batteries, with lower costs and longer useful life. In this way, this paper proposes a scheduling tool considering the energy storage useful l... [more]

Electrochemical energy storage (EES) is a promising kind of energy storage and has developed rapidly in recent years in many countries. EES planning is an important topic that can impact the earnings of EES investors and sustainable industrial development. Current studies only consider the profit or cost of the EES planning program, without considering other economic criteria such as payback period and return on investment (ROI), which are also important for determining an optimal EES planning program. In this paper, a new hybrid multi-criteria decision-making (MCDM) method integrating the Bayesian best-worst method (BBWM), the entropy weighting approach, and grey cumulative prospect theory is proposed for the optimal EES planning program selection with the consideration of multiple economic criteria. The BBWM and entropy weighting approach are jointly employed for determining the weightings of criteria, and the grey cumulative prospect theory was utilized for the performance rankings... [more]

Combined cooling, heating, and power (CCHP) systems are a promising energy-efficient and environment-friendly technology. However, their performance in terms of energy, economy, and environment factors depends on the operation strategy. This paper proposes a multi-energy complementary CCHP system integrating renewable energy sources and schedulable heating, cooling, and electrical loads. The system uses schedulable loads instead of energy storage, at the same time, a collaborative optimization scheduling strategy, which integrates energy supply and load demand into a unified optimization framework to achieve the optimal system performance, is presented. Schedulable cooling and heating load models are formulated using the relationship between indoor and outdoor house temperatures. A genetic algorithm is employed to optimize the overall performance of energy, economy, and environment factors and obtain optimal day-ahead scheduling scheme. Case studies are conducted to verify the efficien... [more]

Italy, Greece, and, to a lesser degree, Bulgaria have experienced fast growth in their renewable generation capacity (RESc) over the last several years. The consequences of this fact include a decrease in spot wholesale prices in electricity markets and a significant effect on cross border trading (CBT) among neighboring interconnected countries. In this work, we empirically analyzed historical data on fundamental market variables (i.e., spot prices, load, RES generation) as well as CBT data (imports, exports, commercial schedules, net transfer capacities, etc.) on the Greek, Italian, and Bulgarian electricity markets by applying the Granger causality connectivity analysis (GCCA) approach. The aim of this analysis was to detect all possible interactions among the abovementioned variables, focusing in particular on the effects of growing shares of RES generation on the commercial electricity trading among the abovementioned countries for the period 2015−2018. The key findings of this pa... [more]

The energy transition from fossil-based energy sources to renewable energy sources of an industrialized country is a big challenge and needs major systemic changes to the energy supply. Such changes require a holistic view of the energy system, which includes both renewable potentials and consumption. Thereby exergy, which describes the quality of energy, must also be considered. In this work, the determination and analysis of such a holistic view of a country are presented, using Austria as an example. The methodology enables the calculation of the spatially resolved current exergy consumption, the spatially resolved current useful exergy demand and the spatially resolved technical potential of renewable energy sources (RES). Top-down and bottom-up approaches are combined in order to increase accuracy. We found that, currently, Austria cannot self-supply with exergy using only RES. Therefore, Austria should increase the efficiency of its energy system, since the overall exergy efficie... [more]

An important issue in directional sensor networks (DSNs) is how to prolong the network lifetime in Q-coverage scenarios where each target point may have different coverage requirements. When the Q-coverage requirement is met, it is an effective way to maximize the network lifetime by controlling energy consumptions. Unlike the existing results where only the sensing energy consumption is considered, this paper proposes a new hybrid energy consumption pattern, which reflects the reality of energy consumptions more closely. In such a pattern, both sensing and communication energy consumptions are considered. By combining scheduling and clustering technologies to control these two kinds of energy consumptions in each round, a new lifetime-enhancing method (NLEM) is devised to prolong the network lifetime. First, a sensing direction scheduling algorithm for Q-coverage is proposed to make different sensing direction sets meet the coverage requirement of each target point. Then, a new cluste... [more]

There is great interest in data-driven modelling for the forecasting of building energy consumption while using machine learning (ML) modelling. However, little research considers classification-based ML models. This paper compares the regression and classification ML models for daily electricity and thermal load modelling in a large, mixed-use, university building. The independent feature variables of the model include outdoor temperature, historical energy consumption data sets, and several types of ‘agent schedules’ that provide proxy information that is based on broad classes of activity undertaken by the building’s inhabitants. The case study compares four different ML models testing three different feature sets with a genetic algorithm (GA) used to optimize the feature sets for those ML models without an embedded feature selection process. The results show that the regression models perform significantly better than classification models for the prediction of electricity demand a... [more]

The penetration of photovoltaic (PV) outputs brings great challenges to optimal operation of active distribution networks (ADNs), especially leading to more serious overvoltage problems. This study proposes a zonal voltage control scheme based on multiple spatiotemporal characteristics for highly penetrated PVs in ADNs. In the spatial domain, a community detection algorithm using a reactive/ active power quality function was introduced to partition an ADN into sub-networks. In the time domain, short-term zonal scheduling (SZS) with 1 h granularity was drawn up based on a cluster. The objective was to minimize the supported reactive power and the curtailed active power in reactive and active power sub-networks. Additionally, a real-time zonal voltage control scheme (RZVC) with 1 min granularity was proposed to correct the SZS rapidly by choosing and controlling the key PV inverter to regulate the supported reactive power and the curtailed active power of the inverters to prevent the ove... [more]

Combined heat and power (CHP), an efficient heating method with cascades use of energy, accounts for approximately 50% of the heat sources in northern China. Many researchers have made significant efforts to improve its energy efficiency and environmental effects with important achievements. Given that the system produces heat and electricity at the same time, this study focuses on the role of CHP in the holistic urban energy system and points out the mismatch between the demand and supply sides of urban energy systems by using the heat-to-power ratio as a parameter. The calculation method and characteristics of the supply side heat-to-power ratio of eight heating methods and the maximum demand side heat-to-power ratio for 19 cities in northern China are displayed. After the analysis, it is concluded that (1) the maximum demand side heat-to-power ratio in the cities varies from 1.0 to 5.9, which is affected by the location and social, economic, and industrial structures. (2) In most of... [more]

Construction duration and schedule robustness are of great importance to ensure efficient construction. However, the current literature has neglected the importance of schedule robustness. Relatively little attention has been paid to schedule robustness via deviation of an activity’s starting time, which does not consider schedule robustness via structural deviation caused by the logical relationships among activities. This leads to a possibility of deviation between the planned schedule and the actual situation. Thus, an optimization model of construction duration and schedule robustness is proposed to solve this problem. Firstly, duration and two robustness criteria including starting time deviation and structural deviation were selected as the optimization objectives. Secondly, critical chain method and starting time criticality (STC) method were adopted to allocate buffers to the schedule in order to generate alternative schedules for optimization. Thirdly, hybrid grey wolf optimiz... [more]

Energy, water, and environment are inextricably interwoven in the complex social and economic networks. This study proposes an optimization model for planning the energy−water−environment nexus system (EWENS) through incorporating the linear autoregressive integrated moving average model prediction model (ARIMA), Monte Carlo simulation, chance-constrained programming (CCP), and type-2 fuzzy programming (T2FP) into one general framework. This method effectively tackles type-2 fuzzy set and stochastic uncertainties. The proposed model can quantitatively explore the interconnections between water, energy, and environment systems and generate an optimized solution for EWENS. The proposed model was applied to a coal-dominated region of China, i.e., Inner Mongolia. Several findings and policy implications were obtained. First, the total water supply for energy-generating activities will range from 1368.10 × 106 m3 to 1370.62 × 106 m3, at the end of planning periods. Second, the electricity f... [more]

Active distribution networks must operate properly for different scenarios of load levels and distributed generation. An important operational requirement is to maintain the voltage profile within standard operating limits. To do this, this paper proposed a Multi-Scenario Three-Phase Optimal Power Flow (MTOPF) that plans the voltage regulation of unbalance and active distribution networks considering typical scenarios of operation. This MTOPF finds viable operation points by the optimal adjustments of voltage regulator taps and distribution transformer taps. The differentiating characteristic of this formulation is that in addition to the traditional tuning of voltage regulator taps of an active network applied for just one scenario of load and generation, it also performs the optimal adjustment of distribution transformer taps, which, once fixed, is able to meet the voltage limits of diverse operating situations. The optimization problem was solved by the primal-dual interior-point me... [more]

Residential microgrid is widely considered as a new paradigm of the home energy management system. The complexity of Microgrid Energy Scheduling (MES) is increasing with the integration of Electric Vehicles (EVs) and Renewable Generations (RGs). Moreover, it is challenging to determine optimal scheduling strategies to guarantee the efficiency of the microgrid market and to balance all market participants’ benefits. In this paper, a Multi-Agent Reinforcement Learning (MARL) approach for residential MES is proposed to promote the autonomy and fairness of microgrid market operation. First, a multi-agent based residential microgrid model including Vehicle-to-Grid (V2G) and RGs is constructed and an auction-based microgrid market is built. Then, distinguish from Single-Agent Reinforcement Learning (SARL), MARL can achieve distributed autonomous learning for each agent and realize the equilibrium of all agents’ benefits, therefore, we formulate an equilibrium-based MARL framework according t... [more]

We formulated a problem faced by a power producer who owns a combined-cycle gas turbine (CCGT) and desires to maximize its expected profit in a medium-term planning horizon. We assumed that this producer can participate in the spot and over-the-counter markets to buy and sell natural gas and electricity. We also considered that the power producer has gas storage available that can be used for handling the availability of gas and the uncertainty of gas prices. A stochastic programming model was used to formulate this problem, where the electricity and gas prices were characterized as stochastic processes using a set of scenarios. The proposed model includes the technical constraints resulting from the operation of the combined cycle power plant and the gas storage and a detailed description of the different markets in which the power producer can participate. Finally, the performance of the proposed model is tested in a realistic case study. The numerical results show that the usage of... [more]

This paper addresses the planning and deployment of wireless heterogeneous networks (WHNs) for smart metering, based on a cross-layer solution. We combine the constraints of the network layer that considers routing and flow demands at each link in the WHN, while at the same time, we account for the restrictions of the physical layer referred to the capacity of a short range technology when used in a multi-hop fashion. We propose a model based on a column generation approach to solve the capacitated multicommodity flow problem (CMCF); the model includes wireless links capacities, coverage, and cost. The work integrates the multi-hop routing of packets in a mesh network formed by smart meters and concentrators connected to a cellular network via base stations. The traffic of each link is represented in a multigraph with the occupation percentage, and we build a scalable routing tree on a georeferenced map to represent a real deployment. The results describe the behavior of the proposed m... [more]