This paper reviews the chemical hydrolysis processes of dairy manure fiber to make its sugar accessible to microorganisms during anaerobic digestion and identifies obstacles and opportunities. Researchers, so far, investigated acid, alkali, sulfite, and advanced oxidation processes (such as hydrogen peroxide assisted by microwave/ultrasound irradiation, conventional boiling, and wet oxidation), or their combinations. Generally, dilute acid (3−10%) is less effective than concentrated acid (12.5−75%), which decrystallizes the cellulose. Excessive alkaline may produce difficult-to-degrade oxycellulose. Therefore, multi-step acid hydrolysis (without alkaline) is preferred. Such processes yielded 84% and 80% manure-to-glucose and -xylose conversion, respectively. Acid pretreatment increases lignin concentration in the treated manure and hinders subsequent enzymatic processes but is compatible with fungal cellulolytic enzymes which favor low pH. Manure high alkalinity affects dilute acid pre... [more]

Biolubricants refer to eco-friendly, biodegradable, and non-toxic lubricants. Their applications are still limited compared to mineral oils; however, their sustainable credentials are making them increasingly attractive. Vegetable oils are frequently used for this purpose. However, vegetable oils have issues of low lipid productivity, dependence on climatic conditions, and need for agricultural land. Microbial oils represent a more sustainable alternative. To ensure their widespread applicability, the suitability of microbial oils from a physicochemical point of view needs to be determined first. In this study, oils obtained from various oleagenic microbes—such as microalgae, thraustochytrids, and yeasts—were characterized in terms of their fatty acid profile, viscosity, friction coefficient, wear, and thermal stability. Oleaginous microalgal strains (Auxenochlorella protothecoides and Chlorella sorokiniana), thraustochytrids strains (Aurantiochytrium limacinum SR21 and Aurantiochytriu... [more]

Even thoughdigestate, which is continually generated in anaerobic digestion process, can only be used as fertilizer during the growing season, digestate treatment is still a critical, environmental problem. That is why the present work aims to develop a method to manage digestate in agricultural biogas plant in periods when its use as fertilizer is not possible. A lab-scale system for the biological treatment of the digestate liquid fraction using the activated sludge method with a separate denitrification chamber was constructed and tested. The nitrogen load that was added tothe digestate liquid fraction accounted for 78.53% of the total nitrogen load fed into the reactor. External carbon sources, such as acetic acid, as well as flume water and molasses, i.e., wastewater and by-products from a sugar factory, were used to support the denitrification process. The best results were obtained using an acetic acid and COD (Chemical Oxygen Demand)/NO3−N (Nitrate Nitrogen) ratio of 7.5. The r... [more]

The codigestion of slaughter waste with animal manure can improve its methane yield, and digestion parameters; however, limited studies are available for the effectiveness of anaerobic codigestion using swine slaughter waste (SSW) and swine slurry (SS). Hence, this study was conducted to determine the characteristics of SSW and the effect of anaerobic codigestion with (SS) and explored the potential of CH4 production (Mmax), the lag phase period (λ), and effective digestion time (Teff). SSW contains fat and protein contents of 54% and 30% dry weight within 18.2% of solid matters, whereas SS showed only 6% and 28% within 4.1% of solid matters, respectively. During sole anaerobic digestion, SSW produced a high Mmax (711 Nml CH4/g VSadded) but had a long duration λ (~9 days); whereas SS produced a low Mmax (516 Nml CH4/g VSadded) but had a shorter duration λ (1 day). Codigestion increased the Mmax from 22−84% with no significant Teff compared to sole SS digestion. However, the low Mmax of... [more]

Fungal pretreatment of switchgrass using Phanerochaete chrysosporium (PC), Trametes versicolor 52J (TV52J), and the Trametes versicolor mutant strain (m4D) under solid-state fermentation was conducted to improve its pellet quality. For all three fungal strains, the fermentation temperature had a significant effect (p < 0.05) on pellet unit density and tensile strength. The p-values of the quadratic models for all the response variables showed highly significant regression models (p < 0.01) except for dimensional stability. In addition, 3.1-fold and 2.8-fold increase in pellet tensile strength were obtained from P. chrysosporium- and T. versicolor 52J-treated materials, respectively. Microstructural examination showed that fungal pretreatment reduced pores in the pellets and enhanced pellet particle bonding. Among the fungal strains, PC had the shortest optimum fermentation time (21 d) and most positive impact on the pellet tensile strength and hydrophobicity. Therefore, switchgra... [more]

This study investigated the impact of sonication parameters on the efficiency of the extraction of bioactive substances from hawthorn berries. The ultrasonic treatment was performed in two modes: continuous and pulse. In the pulse mode, the samples were sonicated with the following processor settings: 1 s on-2 s off. The effective ultrasonic processor times were 5, 10, and 15 min, and the total extraction times were 15 min, 30 min, and 45 min. The content of total polyphenols and total anthocyanins was determined by a spectrophotometric method. We show that the operating mode of the processor affects extraction efficiency, energy consumption and unit energy inputs. Extraction supported by a pulsating ultrasonic field allowed saving from 20% to 51% of energy with a simultaneous higher efficiency of the process. In addition, we show that the unit energy consumption in the pulsed mode was about 40% to 68% lower than the energy consumption in the case of continuous operation.

Anaerobic digestion using cigarette butts, one of most littered items, was studied not only as a waste treatment, but also as an energy production method. Methane production from cigarette butts was measured through the biochemical methane potential (BMP) test and it was evaluated whether it is possible to produce electrical energy. Intact cigarettes or individual components (filter, paper, and leaf) were supplied as the sole carbon source (substrate) for the BMP test. The tendency of methane production indicated biodegradation in the order of paper, filter, and leaves; however, the filter of cigarettes was the substrate produced the highest amount of methane per total solid. The microbial community was also analyzed in each anaerobic digestion reactor, and substrate-specific microorganisms were identified, such as Proteiniphilum strain (filter) and Methanobacterium formicicum (paper). In intact cigarettes, the related microbial community became dominant over time in the order of paper... [more]

In the present study, the protein-extracted grass residue (press cake) was processed through hydrothermal liquefaction under sub and supercritical temperatures (300, 350 and 400 °C) with and without using a potassium carbonate catalyst. The results revealed that bio-crude yield was influenced by both temperature and the catalyst. The catalyst was found to be effective at 350 °C (350 Cat) for enhancing the bio-crude yield, whereas supercritical state in both catalytic and non-catalytic conditions improved the quality of bio-crude with reasonable HHVs (33 to 36 MJ/kg). The thermal behaviour of bio-crude was analysed and higher volatile contents (more than 50% under the range of 350 °C) were found at supercritical conditions. The overall TOC values in the residual aqueous phase varied from 22 to 38 g/L. Higher carbon loss was noticed in the aqueous phase in supercritical conditions. Furthermore, GCMS analysis showed ketones, acids and ester, aromatics and hydrocarbon with negligible nitro... [more]

Microbial fuel cells (MFCs) are biochemical systems having the benefit of producing green energy through the microbial degradation of organic contaminants in wastewater. The efficiency of MFCs largely depends on the cathode oxygen reduction reaction (ORR). A preferable ORR catalyst must have good oxygen reduction kinetics, high conductivity and durability, together with cost-effectiveness. Platinum-based electrodes are considered a state-of-the-art ORR catalyst. However, the scarcity and higher cost of Pt are the main challenges for the commercialization of MFCs; therefore, in search of alternative, cost-effective catalysts, those such as doped carbons and transition-metal-based electrocatalysts have been researched for more than a decade. Recently, perovskite-oxide-based nanocomposites have emerged as a potential ORR catalyst due to their versatile elemental composition, molecular mechanism and the scope of nanoengineering for further developments. In this article, we discuss various... [more]

Carbonate sediments are susceptible to many factors, such as paleostructure, diagenesis, and strong microbial alteration; as such, their sedimentary architecture still calls for further research. In this study, the reef and shoal bodies in the XVm and XVp layers of the Middle−Upper Jurassic Karlov-Oxfordian in the S gas field were used as the object, and the architecture of the reef-shoal facies was studied. Based on the idea of “vertical grading and horizontal boundary”, the interface characteristics of the 6th to 4th levels of reef-shoal bodies in the study area were summarized, as were four ways to determine the boundaries of reef-shoal bodies. Based on the dense well network, we quantitatively described the scale of each small layer of single reef shoal body through the point-line-surface method and established a geological database of the reef shoal bodies in the study area. In addition, we established the width and thickness of the reef shoal body and the empirical formula for re... [more]

, a xylose-fermenting yeast, has the potential for converting cellulosic biomass to ethanol. Thermotolerant C. tropicalis X-17, which was isolated in Laos, was subjected to repetitive long-term cultivation with a gradual increase in temperature (RLCGT) in the presence of a high concentration of glucose, which exposed cells to various stresses in addition to the high concentration of glucose and high temperatures. The resultant adapted strain demonstrated increased tolerance to ethanol, furfural and hydroxymethylfurfural at high temperatures and displayed improvement in fermentation ability at high glucose concentrations and xylose-fermenting ability. Transcriptome analysis revealed the up-regulation of a gene for a glucose transporter of the major facilitator superfamily and genes for stress response and cell wall proteins. Additionally, hydropathy analysis revealed that three genes for putative membrane proteins with multiple membrane-spanning segments were also up-regulated. From the... [more]

In order to valorize lignin wastes to produce useful aromatic compounds, the thermal degradation pyrolysis of Kraft lignin in the absence of catalysts has been investigated at 350, 450, and 550 °C. The high content of sulfur in the fresh sample led to the formation of S-containing compounds in products whose evolution in the gas phase was monitored through GC-MS analysis. Pyrolytic gas is rich in CH4, CO, CO2, and H2S with the presence of other sulfur compounds in smaller amounts (i.e., CH3SH, CH3-S-CH3, SO2, COS, and CS2). Biochar morphology and elemental composition have been investigated by means of SEM and EDX. The carbon content reaches ~90% after pyrolysis at 550 °C, while the oxygen content showed a decreasing trend with increasing temperature. From GC-MS analysis, bio-oil resulted rich in alkyl-alkoxy phenols, together with (alkyl)dihydroxy benzenes and minor amounts of hydrocarbons and sulfur compounds. NaOH/H2O and EtOH/H2O extraction were performed with the aim of extracting... [more]

Reactive transport (RT) couples bio-geo-chemical reactions and transport. RT is important to understand numerous scientific questions and solve some engineering problems. RT is highly multidisciplinary, which hinders the development of a body of knowledge shared by RT modelers and developers. The goal of this paper is to review the basic conceptual issues shared by all RT problems, so as to facilitate advancement along the current frontier: biochemical reactions. To this end, we review the basic equations to indicate that chemical systems are controlled by the set of equilibrium reactions, which are easy to model, but whose rate is controlled by mixing. Since mixing is not properly represented by the standard advection-dispersion equation (ADE), we conclude that this equation is poor for RT. This leads us to review alternative transport formulations, and the methods to solve RT problems using both the ADE and alternative equations. Since equilibrium is easy, difficulties arise for kine... [more]

Lubricants are substances of the foremost importance in the modern world, as they are essential to the proper functioning of various mechanisms. Most lubricants, however, are still made from petroleum fractions. I light of this, and due to various environmental problems, the search for feasible biolubricants has become essential. This study obtained biolubricants through the in situ transesterification of microbial biomass, containing at least 20 wt% of lipids. The following two distinct biomasses were evaluated: the marine microalgae, Dunaliella salina, and the consortium of microalgae-fungi, Scenedesmus obliquus and Mucor circinelloides. Microbial oil from both biomasses presented a fatty acid profile with high amounts of oleic acid. The oil of D. salina had a lower content of polyunsaturated fatty acids relative to the microbial consortium profile, which indicates that this is a good configuration for increasing biolubricant oxidation resistance. The catalyst used was a Keggin-struc... [more]

The conversion of cattle manure into biogas in anaerobic digestion (AD) processes has been gaining attention in recent years. However, antibiotic consumption continues to increase worldwide, which is why antimicrobial concentrations can be expected to rise in cattle manure and in digestate. This study examined the long-term synergistic effects of antimicrobials on the anaerobic digestion of cattle manure. The prevalence of antibiotic resistance genes (ARGs) and changes in microbial biodiversity under exposure to the tested drugs was investigated using a metagenomic approach. Methane production was analyzed in lab-scale anaerobic bioreactors. Bacteroidetes, Firmicutes, and Actinobacteria were the most abundant bacteria in the samples. The domain Archaea was represented mainly by methanogenic genera Methanothrix and Methanosarcina and the order Methanomassiliicoccales. Exposure to antibiotics inhibited the growth and development of methanogenic microorganisms in the substrate. Antibiotic... [more]

The aim of this study was to evaluate the influence of simultaneous, long-term exposure to increasing concentrations of three classes of antimicrobials (β-lactams, fluoroquinolones and nitroimidazoles) on: (1) the efficiency of anaerobic digestion of sewage sludge, (2) qualitative and quantitative changes in microbial consortia that participate in methane fermentation, and (3) fate of antibiotic resistance genes (ARGs). Long-term supplementation of sewage sludge with a combination of metronidazole, amoxicillin and ciprofloxacin applied at different doses did not induce significant changes in process parameters, including the concentrations of volatile fatty acids (VFAs), or the total abundance of ARGs. Exposure to antibiotics significantly decreased methane production and modified microbial composition. The sequencing analysis revealed that the abundance of OTUs characteristic of Archaea was not correlated with the biogas production efficiency. The study also demonstrated that the hydr... [more]

Advanced biofuels incorporation into the transportation sector, particularly cellulosic bioethanol, is crucial for attaining carbon neutrality by 2050, contributing to climate changes mitigation and wastes minimization. The world needs biofuel to be commercially available to tackle the socioeconomic challenges coming from the continued use of fossil fuels. Cynara cardunculus (cardoon) is a cheap lignocellulosic raw biomass that easily grows in Mediterraneous soils and is a potential renewable resource for a biorefinery. This work aimed to study the bioethanol production from cardoon hemicellulosic hydrolysates, which originated from dilute sulfuric acid hydrolysis pretreatment. A detoxification step to remove released microbial fermentative inhibitors was evaluated by using both activated carbon adsorption and a nanofiltration membrane system. The Scheffersomyces stipitis CBS5773 yeast and the modified Escherichia coli MS04 fermentation performances at different experimental conditions... [more]

This study proposed a novel foam EOR technique using Pseudomonas aeruginosa to generate the foam and investigated the potential of the microbial foam EOR to modify the permeability of a high-permeability porous system. We investigated oxygen nanobubble, carbon dioxide nanobubble and ferrous sulfate concentrations to discover the optimal levels for activating the foam generation of the microorganism through cultivation experiments. We also clarified the behavior of the microbial foam generation and the bioproducts that contribute to the foam generation. The potential of the foam to decrease the permeability of high-permeability porous systems was evaluated through flooding experiments using sand pack cores. The foam generation became more active with the increase in the number of nanobubbles, while there was an optimal concentration of ferrous sulfate for foam generation. The foam was identified as being induced by the proteins produced by the microorganism, which can be expected to bri... [more]

Microbial fuel cells (MFCs) are a kind of bioreactor for generating electricity, facilitated by exoelectrogens while treating wastewater. The present article focuses on the performance of an air cathode plexiglass MFC in terms of chemical oxygen demand (COD) removal efficiency and power output by performing two sets of experiments. The proton exchange membrane and electrode materials were Nafion 117 and carbon felts, whereas, for stable biofilm formation on the anode surface, a pure culture of Shewanella baltica 20 was used. Firstly, sterile Luria-Bertani (LB) media containing lactate, ranging from 20 to 100 mM, was continuously fed to an MFC, and a maximum power density of 55 mW/m2 was observed. Similarly, artificial wastewater with COD ranging from 3250 mg/L to 10,272 mg/L was supplied to the MFC in the second set of experiments. In this case, the maximum power density and COD removal efficiency were 12 mW/m2 and 57%, respectively. In both cases, the hydraulic retention time (HRT) wa... [more]

There are several methods of biomass conversion, including hydrothermal liquefaction (HTL). The implementation of microwave technology in the HTL process is still new, especially on the conversion of marine biomass into bio-crude. In this work, the macroalgae Chaetomorpha sp. was used as the biomass feedstock to produce phenolic-rich bio-oil through microwave-assisted HTL. Chaetomorpha sp. was abundantly found in Malaysia, creating a green tides issue. By utilizing these algae, the green tide issue can be solved and value-added bio-oil is obtained. However, bio-oil from macroalgae has a relatively low heating value, restricting its fuel application. Therefore, it is suggested to be used for bio-polymer synthesis, including bio-based phenol formaldehyde. In this study, the effect of different parameters, such as reaction temperature, preloaded pressure, water-to-algal biomass ratio, and holding time, on both the bio-oil yield and phenolic yield was evaluated. Folin−Ciocalteu method was... [more]

To improve the conversion efficiency of propionic acid in the post-anaerobic fermentation of biogas slurry, the anaerobic fermentation process using biogas slurry with a high acid content was simulated in an anaerobic reactor at 35 ± 0.5 °C using sodium propionate as the sole substrate. The effects of different electron acceptors (NO3−, SO42− and Fe3+) on propionic acid conversion and the succession of microbial community structures were investigated. The results showed that the experimental group with the electron acceptor NO3− exhibited the best anaerobic fermentation effect, with a maximum propionate removal rate of 94%, which was 36% higher than the control group without an electron acceptor. The maximum methane production rate was 307.6 mL/g COD, an increase of 30% compared with the control group. Thauera, Aquabacterium, Desulfomicrobium, Clostridium_sensu_stricto_1, and other functional microorganisms were all enriched. The dominant functional genes related to redox reactions, su... [more]

Soil aquifer treatment (SAT), as a gravity-based wastewater reuse process, is limited by oxygen availability to the microbial community in the soil. Using oxygen from enzymatic degradation of H2O2 to generate hyper-oxygen conditions can exceed solubility limitations associated with aeration, but little is known about the effect of hyper-oxygen conditions on the microbial community and the dominant bio-reactions. This study examined the impact of H2O2 addition on the community structure and process performance, along with SAT depth. Overall, two soil columns were incrementally fed synthetic secondary effluents to simulate infiltration through SAT. The experimental column received 14 mg/L hydrogen peroxide to double the level of natural oxygen available. The microbial kinetics of nitrifiers and heterotrophs were evaluated. We found that all of the H2O2 was degraded within the top 10 cm of the column, accompanied by a higher removal of COD (23 ± 0.25%) and ammonia (31 ± 3%) in comparison... [more]

The hydro-swelling of smectite clay minerals in low-permeability reservoirs further decreases the reservoir permeability and results in low oil recovery. Currently, the traditional chemical anti-swelling agents are widely used, but most of them are only effective in the short term and are not environmentally friendly. Here, we report the use of Fe(III) reducing microorganisms (FeRM) as a novel green anti-swelling agent to enhance oil recovery from low-permeability reservoirs. The results showed that FeRM (Proteus hauserifective) inhibited/reduced the hydro-swelling of smectite clay minerals through a three-step biochemical mineralization reaction process. The structural Fe(III) reduction in minerals by FeRM can be an important driving force for illitization. The maximum inhibition efficiency (36.6%) and shrinkage efficiency (69.3%) were achieved at 35 °C and 0.1 Mpa. Furthermore, core displacement tests showed that FeRM reduced the waterflooding injection pressure by 61.1%, increased t... [more]

Biofuel is considered one of the most viable alternatives to fossil fuels derived from the dwindling petroleum resources that damage the environment. Bioethanol could be manufactured from agricultural wastes, thus providing inexpensive natural resources. Several strategies have been utilized to convert lignocellulosic hydrolysate to bioethanol with various suspended microorganisms. In this study, we alternatively propose to encapsulate these microorganisms in bioreactor setups. An immobilized cell system can provide resistance to the inhibitors present in hydrolysates, enhance productivity, facilitate the separation process, and improve microorganism recycling. Herein, we developed a continuous bioethanol production process by encapsulating three types of micro-organisms: T. reesei, S. cerevisiae, and P. stipitis. These microorganisms were encapsulated in SBP (“Small Bioreactor Platform”) capsules and tested for their viability post encapsulation, biological activity, and bioethanol pr... [more]

The problem of environmental pollution by the combustion of fossil fuels in diesel engines, to which NOx emission is a dominant culprit, has accelerated global environmental pollution and global and local health problems such as lung disease, cancer, and acid rain. Among various De-NOx technologies, SCR (Selective Catalytic Reduction) systems are known to be the most effective technology for actively responding to environmental regulations set by the IMO (International Maritime Organization) in marine diesel applications. The ammonia mixes with the exhaust gas and reacts with the NOx molecules on the catalyst surface to form harmless N2 and H2O. However, since the denitrification efficiency of NOx can be rapidly changed depending on the operating temperature from 250 °C to 350 °C at 0.1% sur contents of the catalyst used in the SCR, a device capable of controlling the exhaust gas temperature is essential for the normal operation of the catalyst. In addition, when the catalyst is expose... [more]