Hydrogen produced without carbon emissions could be a useful fuel as nations look to decarbonize their electricity, transport, and industry sectors. Using the iodine−sulfur (IS) cycle coupled with a nuclear heat source is one method for producing hydrogen without the use of fossil fuels. An economic dispatch model was developed for a nuclear-driven IS system to determine hydrogen sale prices that would make such a system profitable. The system studied is the HTTR-GT/H2, a design for power and hydrogen cogeneration at the Japan Atomic Energy Agency’s High Temperature Engineering Test Reactor. This study focuses on the development of the economic model and the role that input data plays in the final calculated values. Using a historical price duration curve shows that the levelized cost of hydrogen (LCOH) or breakeven sale price of hydrogen would need to be 98.1 JPY/m3 or greater. Synthetic time histories were also used and found the LCOH to be 67.5 JPY/m3. The price duration input was f... [more]

(1) Background: considering multiple, and somehow conflicting, design objectives can potentially make achieving a high-performance design a complex task to perform. For instance, shading devices can dramatically affect the building performance in various ways, such as energy consumption and daylight. This paper introduces a novel procedure for designing shading devices as an integral part of daylightophil architecture for office buildings by considering daylight and energy performance as objectives to be optimal. (2) Methods: to address the topic, a three-step research method was used. Firstly, three different window shades (fixed and dynamic) were modeled, one of which was inspired by traditional Iranian structures, as the main options for evaluation. Secondly, each option was evaluated for energy performance and daylight-related variables in critical days throughout the year in terms of climatic conditions and daylight situations (equinoxes and solstices including 20 March, 21 June,... [more]

The impact of multimedia in day-to-day life and its applications will be increased greatly with the proposed model (MSVPC)−5G Multicast SDN network eminence video transmission obtained using PSO and cross layer progress in wireless nodes. The drone inspection and analysis in a solar farm requires a very high number of transmissions of various videos, data, animations, along with all sets of audio, text and visuals. Thus, it is necessary to regulate the transmissions of various videos due to a huge amount of bandwidth requirement for videos. A software-defined network (SDN) enables forwarder selection through particle swarm optimization (PSO) mode for streaming video packets through multicast routing transmissions. Transmission delay and packet errors are the main factors in selecting a forwarder. The nodes that transfer the videos with the shortest delay and the lowest errors have been calculated and sent to the destination through the forwarder. This method involves streaming to be in... [more]

In the power and heat sectors, the uncertainty of energy and carbon prices plays a decisive role in the rationale for decommissioning/repurposing coal-fired CHP (combined heat and power) systems and on investment decisions of energy storage units. Therefore, there is a growing need for advanced methods that incorporate the stochastic disturbances of energy and carbon emission prices into the optimization process of an energy system. In this context, this paper proposes an integrated method for investigating the effects of uncertain energy and carbon prices on the operational patterns and financial results of CHP systems with thermal energy storage units. The approach combines mathematical programming and Monte Carlo simulation. The computational process generates feasible solutions for profit maximization considering the technical constraints of the CHP system and the variation of energy and carbon emission prices. Four scenarios are established to compare the operational patterns and... [more]

Multi-microgrids have gained interest in academics and industry in recent years. Multi-microgrid (MG) allows the integration of different distributed energy resources (DERs), including intermittent renewables and controllable local generators, and provides a more flexible, reliable, and efficient power grid. This research formulates and proposes a solution for finding optimal location and operation of mobile energy storage (MES) in multi-MG power distribution systems (PDS) with different resources during extreme events to maximize system resiliency. For this purpose, a multi-stage event-based system resiliency index is defined and the impact of the Internet of things (IoT) application in MES operation in multi-MG systems is investigated. Moreover, the demand and price uncertainty impact on multi-MG operational performance indices is presented. This research uses a popular PG & E 69-bus multi-MG power distribution network for simulation and case studies. A new hybrid PSO-TS optimization... [more]

This article presents approximating relations defining energy-optimal structures of the HVAC (Heating, Ventilation, Air Conditioning) system for cleanrooms as a function of key constant parameters and energy-optimal control algorithms for various options of heat recovery and external climates. The annual unit primary energy demand of the HVAC system for thermodynamic air treatment was adopted as the objective function. Research was performed for wide representative variability ranges of key constant parameters: cleanliness class—Cs (ISO5÷ISO8), unit cooling loads—q˙j (100 ÷ 500) W/m2 and percentage of outdoor air—αo (5 ÷ 100)%. HVAC systems are described with vectors x¯ with coordinates defined by constant parameters and decision variables, and the results are presented in the form of approximating functions illustrating zones of energy-optimal structures of the HVAC system x¯* = f (Cs, q˙j, αo). In the optimization procedure, the type of heat recovery as an element of optimal structur... [more]

Water supply pumping stations are among the main energy-consuming elements in the water supply system. The energy optimization of a pumping station can significantly affect the energy consumption of a water utility. This article deals with the energy optimization of water pumping stations. The work assumes several variants of optimization of water supply pumping stations through changes in the water supply system, pressure changes in the pumping station, and modification of the number of pumps. After analyzing the network, conducting field tests, and creating a model of the water supply network, the network was calibrated in order to reproduce the existing water network as accurately as possible. Then, a variant analysis was performed, and the best optimization method for the pumping station was selected. In two variants, there was a decrease in electricity consumption; in three there, was an increase; in one, there was no change. By connecting the DMA zones and modifying the pressure... [more]

With the rise of the electric vehicle market share, many logistic companies have started to use electric vehicles for goods delivery. Compared to the vehicles with an internal combustion engine, electric vehicles are considered as a cleaner mode of transport that can reduce greenhouse gas emissions. As electric vehicles have a shorter driving range and have to visit charging stations to replenish their energy, the efficient routing plan is harder to achieve. In this paper, the Electric Vehicle Routing Problem with Time Windows (EVRPTW), which deals with the routing of electric vehicles for the purpose of goods delivery, is observed. Two recharge policies are considered: full recharge and partial recharge. To solve the problem, an Adaptive Large Neighborhood Search (ALNS) metaheuristic based on the ruin-recreate strategy is coupled with a new initial solution heuristic, local search, route removal, and exact procedure for optimal charging station placement. The procedure for the O(1) ev... [more]

The neutral beam injector (NBI) generates a high-energy ion beam and neutralizes it, and then relies on drift transmission to inject the formed neutral beam into the fusion plasma to increase the plasma temperature and drive the plasma current. In order to better cooperate with the Experimental Advanced Superconductive Tokamak (EAST), part of the Chinese major national scientific and technological infrastructure, in carrying out long-pulse high-parameter physics experiments of 400 s and above, this paper considers the optimization of the current design and operation of the NBI beam line with a pulse width of 100 s. Based on an upgraded and optimized NBI vacuum chamber and the structure of the beam-line components, the gas-source characteristics under the layout design of the NBI system are analyzed and an NBI vacuum system that meets relevant needs is designed. Using Molflow software to simulate the transport process of gas molecules in the vacuum chamber, the pressure gradient in the... [more]

As a consequence of the increasing share of renewable energies and sector coupling technologies, new approaches are needed for the study, planning, and control of modern energy systems. Such new structures may add extra stress to the electric grid, as is the case with heat pumps and electrical vehicles. Therefore, the optimal performance of the system must be estimated considering the constraints imposed by the different sectors. In this research, an energy system dispatch optimization model is employed. It includes an iterative approach for generating grid constraints, which is decoupled from the linear unit commitment problem. The dispatch of all energy carriers in the system is optimized while considering the physical electrical grid limits. From the considered scenarios, it was found that in a typical German neighborhood with 150 households, a PV penetration of ∼5 kWp per household can lead to curtailment of ∼60 MWh per year due to line loading. Furthermore, the proposed method eli... [more]

This paper introduces the mobile battery network for electronic devices through powerbanks in a city, and proposes an optimization model to find the optimum site and set-up of the network considering costumers demand, logistics components, the batteries degradation, and terminal’s charger regime. To this end, a series of degradation tests were carried out on lithium-ion batteries, in four different charger regimes, in which the battery voltage amplitude and the charging electric current were varied. The results of these tests were incorporated into the optimization model as the depreciation rate and charge time over battery life. The mathematical modeling innovates by including new components designed specifically for this new problem: battery availability according to charging time; different types of customer service; objective function modeling that includes the logistical costs of battery relocation, terminal maintenance, and battery depreciation. The results indicate that the netw... [more]

The design of longer-lasting products, such as domestic electric appliances, is a key-stone approach of the circular economy to reduce the use of non-reusable materials and the number of wastes to be managed at the end of the product’s life as well as to extend it. The manufacturing of modern electric appliances includes the incorporation of printed circuit boards (PCBs). PCBs provide mechanical support and electrically connect electrical or electronic components using conductive trackpads and other features etched from one or more sheet layers of copper laminated onto and/or between sheet layers of a non-conductive substrate. This paper proposes a PCB maintenance framework, fully compliant with the “Right to Repair” concept, considering the impact of their aging failures based on measurements made on them, as well as the repair and replacement costs of their components. Herein, we present an algorithm that assesses the problem of handling the repair and replacement cost corresponding... [more]

The present work performed a comprehensive investigation to find the effects of a dual-bleeding port recirculation channel on the aerodynamic performance of a single-stage transonic axial compressor, NASA Stage 37, and optimized the channel’s configuration to enhance the operating stability of the compressor. The compressor’s performance was examined using three parameters: The stall margin, adiabatic efficiency, and pressure ratio. Steady-state three-dimensional Reynolds-averaged Navier−Stokes analyses were performed to find the flow field and aerodynamic performance. The results showed that the addition of a bleeding channel increased the recirculation channel’s stabilizing effect compared to the single-bleeding channel. Three design variables were selected for optimization through a parametric study, which was carried out to examine the influences of six geometric parameters on the channel’s effectiveness. Surrogate-based design optimization was performed using the particle swarm op... [more]

With the implementation of the carbon neutral policy, the number of electric vehicles (EVs) is increasing. Thus, it is urgently needed to manage the charging and discharging behavior of EVs scientifically. In this paper, EVs are regarded as agents, and a multiagent cooperative optimization scheduling model based on Roth−Erev (RE) algorithm is proposed. The charging and discharging behaviors of EVs will influence each other. The charging and discharging strategy of one EV owner will affect the choice of others. Therefore, the RE algorithm is selected to obtain the optimal charging and discharging strategy of the EV group, with the utility function of the prospect theory proposed to describe EV owners’ different risk preferences. The utility function of the prospect theory has superior effectiveness in describing consumers’ utility. Finally, in the case of residential electricity, the effectiveness of the proposed method is verified. Compared with that of random charging, this method red... [more]

This work aims to optimize the recovery of methyl methacrylate (MMA) by depolymerization of polymethyl methacrylate (PMMA) dental resins fragments/residues. In order to pilot the experiments at technical scale, the PMMA dental resins scraps were submitted by thermogravimetric analysis (TG/DTG/DTA). The experiments were conducted at 345, 405, and 420 °C, atmospheric pressure, using a pilot scale reactor of 143 L. The liquid phase products obtained at 420 °C, atmospheric pressure, were subjected to fractional distillation using a pilot scale column at 105 °C. The physicochemical properties (density, kinematic viscosity, and refractive index) of reaction liquid products, obtained at 345 °C, atmospheric pressure, were determined experimentally. The compositional analysis of reaction liquid products at 345 °C, 30, 40, 50, 60, 70, 80, and 110 min, at 405 °C, 50, 70, and 130 min, and at 420 °C, 40, 50, 80, 100, 110, and 130 min were determined by GC-MS. The morphology of PMMA dental resins fr... [more]

Last year’s developments are characterized by a dramatic drop in customer demand leading to stiff competition and more challenges that each enterprise needs to cope with in a globalized market. Production in low-mix/high-volume batches is replaced with low-volume/high-variety production, which demands excessive information flow throughout production facilities. To cope with the excessive information flow, this production paradigm requires the integration of new advanced technology within production that enables the transformation of production towards smart production, i.e., towards Industry 4.0. The procedure that helps the decision-makers to select the most appropriate I4.0 technology to integrate within the current assembly line considering the expected outcomes of KPIs are not significantly been the subject of the research in the literature. Therefore, this research proposes a conceptual procedure that focus on the current state of the individual assembly line and proposes the tech... [more]

This paper focuses on the state-of-the-art of unit commitment (UC) and economic dispatch (ED) algorithms suitable for the Italian electricity market. In view of the spread of renewable energy systems (RES), the desired UC algorithm should be able to properly consider the uncertainty affecting key input variables into the formulation of the problem, as well as the different capabilities of dispatched power plants to provide ancillary services (e.g., voltage regulation). The goal of this paper is to resume the developments in UC and ED algorithms which occurred in the last decades, having a particular focus on alternating current (AC) security constrained (SC) approaches and stochastic ones, highlighting the advantages and weakness of each technique. This review is useful for the Italian TSO (Terna) to investigate what is the best solution to formulate a new algorithm to be potentially adopted in the framework of the Italian Ancillary Service Market, striving for an explicit modelization... [more]

This study develops and implements a design of the Fuzzy Proportional Integral Derivative with filtered derivative mode (Fuzzy PIDF) for Load Frequency Control (LFC) of a two-area interconnected power system. To attain the optimal values of the proposed structure’s parameters which guarantee the best possible performance, the Bees Algorithm (BA) and other optimisation tools are used to accomplish this task. A Step Load Perturbation (SLP) of 0.2 pu is applied in area one to examine the dynamic performance of the system with the proposed controller employed as the LFC system. The supremacy of Fuzzy PIDF is proven by comparing the results with those of previous studies for the same power system. As the designed controller is required to provide reliable performance, this study is further extended to propose three different fuzzy control configurations that offer higher reliability, namely Fuzzy Cascade PI − PD, Fuzzy PI plus Fuzzy PD, and Fuzzy (PI + PD), optimized by the BA for the LFC f... [more]

In this study, we solve the challenge of predicting oil recovery factor (RF) in layered heterogeneous reservoirs after 1.5 pore volumes of water-, gas- or water-alternating-gas (WAG) injection. A dataset of ~2500 reservoir simulations is analyzed based on a Black Oil 2D Model with different combinations of reservoir heterogeneity, WAG hysteresis, gravity influence, mobility ratios and WAG ratios. In the first model MOD1, RF is correlated with one input (an effective WAG mobility ratio M*). Good correlation (Pearson coefficient −0.94), but with scatter, motivated a second model MOD2 using eight input parameters: water−oil and gas−oil mobility ratios, water−oil and gas−oil gravity numbers, a reservoir heterogeneity factor, two hysteresis parameters and water fraction. The two mobility ratios exhibited the strongest correlation with RF (Pearson coefficient −0.57 for gas-oil and −0.48 for water-oil). LSSVM was applied in MOD2 and trained using different optimizers: PSO, GA, GWO and GSA. A... [more]

Europe stated the ambitious target of becoming carbon neutral by 2050 to combat climate change and meet the requirements imposed by the Paris Agreement, and renewable energy has proved to be a promising solution for the decarbonization of many sectors. Nonetheless, their aleatory nature leads to grid unbalances due to the difference between supply and demand. Storage solutions are needed, and electrofuels become a key factor in this context: they are fuels produced from electricity, which leads to carbon-neutral fuels if it originates from renewable sources. These can constitute a key solution to store the surplus energy and to decarbonize the so-called hard-to-abate sectors. Electrofuel production technologies have not yet been fully developed, and, in this context, extensive study of the state-of-the-art of existing projects can be very useful for researchers and developers. This work researches the European projects funded by the Horizon 2020 Programme regarding electrofuel producti... [more]

In Italy in 2020, only 15.5% of school building heritage was retrofitted from an energy and environmental point of view. In this paper, the cost-optimal method was applied to two different school buildings belonging to the same Italian cold climate zone but characterized by different structural and technological solutions. The research aims at defining the cost-effective redevelopment solution among several ones proposed to apply to this building type. At the same time, this paper provides a critical analysis of the methodology applied, highlighting deficiencies related to a not proper evaluation of environmentally friendly retrofitting measures. In a cost-effective context, the main results show that the intervention on the heating system is more convenient than the retrofitting of the envelope. The energy saving is equal to about 35% for both considered schools. Among the different proposed requalification configurations, the adoption of PV (photovoltaic) electric generation is inclu... [more]

It is well documented that both solar photovoltaic (PV) systems and electric vehicles (EVs) positively impact the global environment. However, the integration of high PV resources into distribution networks creates new challenges because of the uncertainty of PV power generation. Additionally, high power consumption during many EV charging operations at a certain time of the day can be stressful for the distribution network. Stresses on the distribution network influence higher electricity tariffs, which negatively impact consumers. Therefore, a home energy management system is one of the solutions to control electricity consumption to reduce electrical energy costs. In this paper, a meta-heuristic-based optimization of a home energy management strategy is presented with the goal of electrical energy cost minimization for the consumer under the time-of-use (TOU) tariffs. The proposed strategy manages the operations of the plug-in electric vehicle (PEV) and the energy storage system (ES... [more]

In the present study, the evaluation of potential improvement of the overall efficiency of a common PV panel, valorizing the heat extracted by a heat exchanger that is integrated on its back side, either into work using an endoreversible Carnot engine or into cold by using an endoreversible tri-thermal machine consisting of a heat-driven refrigeration machine operating between three temperature sources and sink (such as a liquid/gas absorption machine), was carried out. A simplified thermodynamic analysis of the PV/thermal collector shows that there are two optimal operating temperatures T˜h and Th* of the panels, which maximize either the thermal exergy or the overall exergy of the PV panel, respectively. The cold produced by the endoreversible tri-thermal machine during the operating conditions of the PV/thermal collector at T˜h is higher with a coefficient of performance (COP) of 0.24 thanks to the higher heat recovery potential. In the case of using the cold produced by a tri-therm... [more]

In this study, Response Surface Methodology (RSM) and multi-objective genetic algorithm were used to obtain optimum parameters of the channels with frustum of a cone with better flow and heat transfer performance. Central composite face-centered design (CCF) was applied to the experimental design of the channel parameters, and on this basis, the response surface models were constructed. The sensitivity of the channel parameters was analyzed by Sobol’s method. The multi-objective optimization of the channel parameters was carried out with the goal of achieving maximum Nusselt number ratio (Nu/Nu0) and minimum friction coefficient ratio (f/f0). The results show that the root mean square errors (RSME) of the fitted response surface models are less than 0.25 and the determination coefficients (R2) are greater than 0.93; the models have high accuracy. Sobol’s method can quantitatively analyze the influence of the channel parameters on flow and heat transfer performance of the channels. When... [more]

In recent years, to increase the fuel efficiency of environment-friendly vehicles, a large volume of research is ongoing regarding applying photovoltaic (PV) systems. However, in PV systems, a power imbalance between submodules is common due to shading or pollution, and this degrades the power generation efficiency of the system. To solve this problem, various differential power processing (DPP) converters have been developed. In order to adopt the DPP converter to environment-friendly vehicles, the DPP converter must have a small volume, high efficiency, and high price competitiveness. In this regard, we propose a DPP converter with a single multi-winding transformer by integrating multiple transformers and secondary sides of the conventional flyback DPP converter. Since the proposed DPP converter can be applied to battery balancing circuits as well as photovoltaic systems, the proposed circuit is a valuable converter. In the PV system, the maximum output power of each submodule is 60... [more]