To address safety problems caused by goaf and water accumulation in open-pit mines, the shallow three-dimensional seismic method and transient electromagnetic method were integrated and applied to detect the mining goaf distribution scope and the water accumulation conditions. In view of the special topographic conditions of an ultrashallow layer and high drop in an open-pit mine, we proposed utilizing bin homogenization and multidomain joint denoising to improve the reliability of seismic data. By using seismic-sensitive attributes to predict the goaf, the transient electromagnetic method was employed to further predict the water accumulation in the goaf. The results show that the shallow seismic method could clearly reflect the reflected-wave variation features of the goaf. The features of a junction between a normal seam and goaf vary obviously, and the prediction effect of the goaf boundary with high resolution is in line with the actual situation. Furthermore, taking the goaf scop... [more]

The Jiuzhou fault in the Langgu Sag of the Bohai Bay Basin is a significant oil-source fault that connects source rocks and reservoirs, and thus it can transport oil and gas during the hydrocarbon accumulation period. The hydrocarbon distribution characteristics along the strike of the Jiuzhou fault differ distinctly, indicating that the transport capacity in different fault segments is also different. In this study, we focused on analyzing the fault development characteristics to accurately predict the location of favorable hydrocarbon transport pathways on the Jiuzhou fault. We found that the zones superimposed by paleo relay ramps developed before hydrocarbon accumulation, active faulting areas during hydrocarbon accumulation, and transport ridges of the fault are favourable along-fault locations for transporting hydrocarbons. Based on this idea and 3D seismic data, we investigated the distribution of the paleo relay ramps of the Jiuzhou fault and the fault activity rate during hydr... [more]

The use of multilateral wells is an important method to effectively develop complex oil reservoirs, and wellbore stability research of multilateral wells is of great importance. In the present study, the effects of formation fluids and rock damage were not taken into account by the wellbore stability model. Therefore, finite element analysis (FEA) software was used to establish a three-dimensional (3D) seepage-stress FEA model for the multilateral junctions. The model was used to analyze the wellbore stability of multilateral wells and study influences of wellbore parameters and drilling fluid density on wellbore stability at multilateral junctions. Simulation results show that the wellbore diameter insignificantly affects wellbore stability. When the angle between the main wellbore and branches enlarges to 45°, the equivalent plastic strain decreases by 0.0726, and the wellbores become more stable; when the angle is larger than or equal to 45°, the region prone to wellbore instability... [more]

The empirical formula is one of the traditional methods used for predicting ground deformation settlement caused by tunnel excavation. Due to its rationality and simplicity, the Peck formula is widely used for predicting surface subsidence. However, due to its limitations, it is necessary to modify it when predicting surface settlement caused by tunnel excavation in different strata. In this paper, a correction formula for the width coefficient of a tunnel surface settlement slot is derived from the Peck formula by taking into account the theory of strata slip cracks. Values are calculated using the correction formula and compared with measured data to verify the effectiveness of the correction formula. The main conclusions are: (1) The position corresponding to the width of the settlement in the Peck curve is the point where the formation is most prone to slip cracking. (2) In the general shallow buried case, the settlement groove width coefficient K and the internal friction angle φ... [more]

With the targets of petroleum exploration transferred to the deep and ancient strata, abundant oil and gas resources have been found in Lower Paleozoic and older strata in central and western China. Due to complex evolutionary processes including multiple episodes of hydrocarbon accumulation and ubiquitously accompanied by secondary alterations, significant uncertainties remain concerning the generation time and accumulation processes of these revealed petroleum sources. In this paper, relative pure Re and Os elements existing in the asphaltene fractions of Lower Cambrian solid bitumen collected from the Guangyuan area, western Sichuan Basin, SW China and Middle−Lower Ordovician heavy oils in the Aiding area of the Tahe oilfield in the Tarim Basin, NW China were successfully obtained by sample pretreatments, and Re−Os isotopic analysis was subsequently carried out for the dating of these. The Re−Os isotopic composition indicates a generation time of Guangyuan bitumen to between 572 Ma... [more]

To investigate gas flow characteristics in coal seams with strong anisotropy, a coupled anisotropic dual-porosity model was established. Effects of permeability anisotropy on variations in gas pressure, gas extraction volume and effective extraction areas were analyzed. Furthermore, mechanisms of crustal stress, initial gas pressure, ultimate adsorption strain and Langmuir volume constant on permeability anisotropy and extraction amount were studied. Results show that permeability anisotropy could result in an elliptical pressure drop zone around production boreholes. Changes in effective gas extraction areas are divided into three stages: slow growth in an elliptical shape, rapid growth with a superposition effect and steady growth in a funnel shape. Permeability isotropy enables faster reaching of stage III than the anisotropy case. As the vertical stress increases, gas pressure distribution around boreholes gradually changes from an ellipse with horizontal direction as long axis to... [more]

Feedback-free fluidic oscillators, relying on the interaction of jets to oscillate, have a wide range of operation frequencies and no moving parts, which is promising for future applications. In this paper, the sweep angle, oscillation frequency, and volume flow rate of the feedback-free fluidic oscillator with a cavity width of 4.6 mm were measured experimentally, and the sweeping mechanism was analyzed based on the internal flow simulation. The influence of the impact angle, cavity exit width, and shoulder radius on the internal flow and external spray characteristics was analyzed by the numerical method. The results show that the sweep angle and oscillation frequency are affected throughout the increase in impact angle from 80° to 120°. However, only when the SR is greater than 0.88 mm does the internal flow and spray state change significantly. The volume flow rate is mainly affected by the cavity exit width and increases linearly from 5.3 mL/s to 9.3 mL/s as the width increases fr... [more]

To improve the prediction of thin reservoirs with special geophysical responses, a geostatistical inversion technique is proposed based on an in-depth analysis of the theory of geostatistical inversion. This technique is based on the Markov chain Monte Carlo algorithm, to which we added the contents of facies-constrained. The feasibility of the technique and the reliability of the prediction results are demonstrated by a prediction of the sand bodies in the braided river channel bars in the Xiazijie Oilfield in the Junggar Basin. Based on the MCMC algorithm, the results show that leveraging the lateral changes in the seismic waveforms as geologically relevant information to drive the construction of the variogram and the optimization of the statistical sampling can largely overcome the obstacle that prevents traditional geostatistical inversions from accurately delineating the sedimentary characteristics; thereby, the proposed algorithm truly achieves facies-constrained geostatistical... [more]

The Y oilfield reservoir is characterized by ultra-depleted reservoir and multiple pressure systems in each well section. If conventional PLUS/KCL drilling fluid is used in directional drilling, the following problems are found: the rheological stability of drilling fluid is not sufficient, resulting in increased viscosity and thickening after aging, and the single plugging material may cause loss-circulation when the drilling differential pressure is more than 26 MPa, resulting in poor reservoir protection effects. To solve the above problems, based on the conventional PLUS/KCL drilling fluid formula, a PLUS/KCL drilling fluid system suitable for directional drilling in multi-pressure systems was formed by optimizing the addition of a treating agent to improve the rheological stability of the drilling fluid, optimizing the plugging agent and compound combination to improve plugging ability, and optimizing the particle size distribution of a temporary plugging agent to improve the rese... [more]

In this paper, based on the gneiss outcrop of Bozhong 196 gas field in China, uniaxial compression and Brazil splitting tests were conducted by using cores of different orientations. The following compression properties were studied: the elastic compression modulus, Poisson’s ratio and compressive strength of the gneiss outcrop. The following tensile properties were studied: the tensile modulus, the tensile strength and peak energy rate of gneiss outcrop. The results demonstrate the following: (1) The elastic compression modulus, compressive strength, tensile strength and peak energy rate of gneiss specimens with horizontal core-taking are greater than those with vertical core-taking. (2) The elastic compression modulus, Poisson’s ratio and compressive strength of horizontally cored gneiss specimens are 29.688−45.760 GPa, 0.186−0.386, and 174.94−147.80 MPa, respectively; the elastic compression modulus, Poisson’s ratio and compressive strength of the vertical gneiss specimens are 26.54... [more]

An electric power system is an important factor in national economic development. However, as an electric power system requires more electric equipment in its operation process, it is prone to short circuits, faults and other problems, which can lead to fires. To help prevent fires in such power systems, the hydraulic performance of the existing firefighting monitor should be optimized. A rectifier is an important structure which affects the performance of the firefighting monitor. In this paper, numerical simulations based on CFD (computational fluid dynamics) are carried out to analyze the fluid flow inside firefighting monitors with five different rectifier structures. In addition, the effects of rectifier structure on both the turbulent kinetic energy and axial velocity of the fluid inside the firefighting monitor are analyzed. The results show that rectifier installation can reduce the turbulent energy of the inlet and outlet of the firefighting monitor and improve the axial veloc... [more]

This paper reviews alternative econometric approaches the literature has used to examine the connectedness between oil prices and exchange rates and illustrates their application using quarterly data from 1970: Q1 to 2022: Q1 for ASEAN-5 countries, which are as follows: Indonesia, Malaysia, the Philippines, Singapore, and Thailand. Although most studies examining the impact of oil prices and exchange rates apply the Ordinary Least Squares (OLS) approach with symmetry, the quantile regression (QR) method is shown to offer a thorough investigation of the connectedness. For ASEAN-5 countries, we present a comparative analysis of both methodologies (OLS and QR) with and without asymmetry. Our findings suggest that asymmetric effects triggered by oil prices are noticeably heterogeneous across quantiles. Hence, future studies should allow for asymmetry in the oil price by decomposing the price into positive and negative changes to further investigate the connectedness between oil prices and... [more]

Solar UAVs (unmanned aerial vehicles) have experienced important development in recent years. The use of solar free energy is not neglected in the present energy crisis, with the intention to move toward green energies. However, an important problem arises concerning the limited amount of solar energy available on board UAVs. Until now, high-aerodynamic-efficiency configurations have been used. These configurations use high-aspect-ratio wings. However, high-aspect-ratio wings have some disadvantages regarding their excessive elasticity and weak bending resistance in the housing section. Additionally, the aircraft maneuverability is reduced. In this work, a study is proposed on a solar UAV configuration that sacrifices high aerodynamic efficiency for a higher surface area available for solar cells. In this manner, the amount of energy available on board the UAV is increased, and the UAV structure becomes more rigid and robust. The presented UAV fits better with more complex evolutions,... [more]

This article presents research conducted in one of the largest mining companies in the EU—Jastrzębska Spółka Węglowa S.A. It relates to how the implementation of sustainable strategic management has affected methane projects. In the study, a literature analysis was first conducted, establishing the existence and significance of the research gap. Then, a group of experts from JSW S.A., during moderated workshops, prepared a multidimensional model describing the structure of the implementation of sustainable strategic management. The model was constructed and verified using the AHP method. As a result of the study, it was found that the implementation of sustainable strategic management resulted in a change of the company’s strategic priorities. Significant professionalization of management in the course of these projects was also observed. The most important and beneficial element of the implementation was the adoption of strategic goals related to the production of their very own energ... [more]

Cities are currently responsible for an important part of energy consumption and greenhouse gas emissions, justifying the need to develop measures to help them become more sustainable. One of those measures can be to address under-utilized assets in cities, such as derelict buildings with high potential for rehabilitation, and the establishment of new residence hubs within cities. Consequently, this work establishes a novel framework for evaluating the impact of rehabilitating these buildings in an urban area in Lisbon, considering the energy consumption associated with the usage of the dwelling as well as the impact on mobility, since it was considered that these buildings will be occupied by people who currently work nearby but live in the outskirts of Lisbon, favouring an urban planning of proximity between home and work. To this extent, a methodology was developed for selecting the buildings to be analysed and the commuting movements to be replaced. Then, buildings were simulated i... [more]

Previous gas hydrate production tests conducted by the Guangzhou Marine Geological Survey (GSGM) in 2017 and 2020 indicated the great potential of gas hydrates in the Shenhu Sea area in the Pearl River Mouth Basin (PRMB), China. In this study, the effects of deposition processes in submarine canyons and the distribution of gas chimneys on gas hydrate accumulation were investigated using high-resolution two- dimensional (2D) and three-dimensional (3D) seismic data. Four intact submarine canyons were identified in the study area. Five deepwater depositional elements are closely related to submarine canyons: lateral accretion packages (LAPs), basal lags, slides, mass transport deposits (MTDs), and turbidity lobes. MTDs and lobes with multiple stages outside the distal canyon mouth reveal that the sedimentary evolution of the canyon was accompanied by frequent sediment gravity flows. Gas chimneys originating from Eocene strata are generally up to 3 km wide and distributed in a lumpy or ban... [more]

Squirrel-cage fans are widely applied in air conditioning systems, and their aerodynamic noise mainly related to blade length. The aerodynamic performance and noise spectrum of squirrel-cage fans are synchronously measured in an anechoic wind tunnel. The effect of blade lengths and different geometric configurations on the noise of a squirrel-cage fan is experimentally investigated. This paper focuses on the total sound pressure level and noise spectrum characteristics at different measurement points. Noise distributions of the outlet of the forward squirrel-cage fan exhibited axial-symmetry and large differences for those of vertical direction. In lower fan positions, the noise was greater than that of the top. In particular, it was found that blades were easy to generate higher noise when their length was reduced by 31.7%. The findings suggest that the broadband noise of the squirrel-cage fan should be fully considered for noise reduction. The purpose of this work is to provide a nov... [more]

Hydrocarbon fluid migration through faulted cap rocks was determined by comparing the maximum connected thickness of cap rocks required for hydrocarbon fluid migration and the actual values, since cap rocks are important in the study of hydrocarbon fluid distribution in petroliferous basins based on its migration mechanism(s). The maximum connected thickness required was identified by comparing the cap rocks, fault displacement, and oil/gas distribution. The hydrocarbon fluid at the Putaohua reservoir migrated to the overlying Saertu and Heidimiao reservoirs in the Bayan Chagan Area, northern Songliao Basin. This was predicted to demonstrate the validity of the method. The results show that the adjusted Putaohua oil reservoir was distributed near the Talahai fault and Bayanchagan fault, rather than the Gulong sag in the southwest of the study area, where oil migrated vertically through the Sapu cap rocks to the overlying Saertu reservoir. Thick mudstone cap rocks in the second member o... [more]

The origin of deep-water mounds has been a topic of debate in recent years. In this study, newly collected seismic data were employed to characterize the mounds within the Meishan Formation in the Qiongdongnan Basin and a novel model was proposed. The result showed that pervasive mounds and ‘V’-shaped troughs were alternately distributed at the top of the Meishan Formation. They appeared as elongated ridges flanked by similarly elongated gullies, with the trending parallel with the strike of the basinward slope. The mounded features were considered to be formed in response to the tectonically induced seabed deformation. The differential subsidence steepened the slope that was equivalent to the top of the Meishan Formation (ca. 10.5 Ma), which offered sufficient driving forces triggering the slope’s instability. Correspondingly, the uppermost deposits glided along a bedding-parallel detachment surface, creating a number of listric detachment faults that ceased downward to this surface.... [more]

The research consisted of simulating the movement of a single vehicle in relation to the swarm leader on a square-shaped path, taking into account measurement errors characteristic of typical cheap navigation devices and the hydroacoustic system. The research showed that these methods allow for estimating position coordinates with an accuracy of about 0.5 m (RMS) in the case of a calibrated navigation system and about 3.6 m (RMS) in the case of a non-calibrated navigation system. It also showed that it can provide a higher accuracy of estimating position coordinates in terms of abeam angles of the swarm leader (relative bearing equal to approximately ±90°), as well as while ensuring minimizing systematic errors values and proper estimation of mean errors values concerning course and speed measurements.

A series of experimental tests on flow-induced motion (FIM) and energy conversion of two rigidly coupled triangular prisms (TRCTP) in tandem arrangement were conducted in a recirculating water channel with the constant oscillation mass mosc. The incoming flow velocity covered the range of 0.395 m/s ≤ U ≤ 1.438 m/s, corresponding to the Reynolds number range of 3.45 × 104 ≤ Re ≤ 1.25 × 105. The upstream and downstream triangular prisms with a width of 0.1 m and length of 0.9 m were connected by two rectangular endplates. Seven stiffness (1000 N/m ≤ K ≤ 2400 N/m), five load resistances (8 Ω ≤ RL ≤ 23 Ω), and five gap ratios (1 ≤ L/D ≤ 4) were selected as the parameters, and the FIM responses and energy conversion of TRCTP in tandem were analyzed and discussed to illustrate the effects. The experimental results indicate that the “sharp jump” phenomenon may appear at L/D = 2 and L/D = 3 significantly, with substantially increasing amplitude and decreasing oscillation frequency. The maximum... [more]

For over three (3) decades, there has been an increase in research on energy sources from the production of oil using flexible marine risers, such as marine hoses. Marine hoses are conduits for special use as rubberized structures with hybrid polymer composites for offshore platforms in the oil and gas industry. This scientometric study uses qualitative, quantitative, and computational approaches. Data were retrieved using a research methodology that was created for this study using the SCOPUS and Web of Science (WoS) databases. This study provides a bibliometric literature review on marine hoses with an emphasis on the advancements made in the field from recent developments, geographical activity by countries, authorship histories, partnerships, funding sources, affiliations, co-occurrences, and potential research areas. The study found that the USA had the most publications, but there were fewer co-occurrences with connections outside the cluster. Due to the difficulty of adaptation,... [more]

To study the spatial distribution and scale of oil and gas near faults in petroliferous basins, a prediction model is established for the degree of damage that faults in different stages of evolution exert on the sealing ability of mudstone cap rocks by calculating the stages and degree of fault damage to the sealing ability of mudstone cap rocks. This model is applied to the Nanpu 5th Structure and the results show that at survey lines L2 and L8, the F1 Fault destroyed the sealing capacity of mudstone cap rock of the 2nd member of Dongying Formation (E3d2). The undamaged cap rock stage, when the degree of damage was zero, persisted from 23.8 to 16.0 Ma at survey line L2 and from 23.8 to 13.6 Ma at survey line L8. Complete destruction, i.e., where the degree of damage was 100%, at survey lines L2 and L8 occurred from 16.0 to 13.3 Ma and from 13.6 to 13.3 Ma, respectively. The partial destruction stage began 13.3 Ma ago and persists today; the degrees of damage at survey lines L2 and L8... [more]

The tracking of magnetic field lines can be very expensive, in terms of computational burden, when the field sources are numerous and have complex geometries, especially when accuracy is a priority, because an evaluation of the field is required in many situations. In some important applications, the computational cost can be significantly reduced by using a suitable approximation of the field in the integrated regions. This paper shows how Chebyshev polynomials are well-suited for field interpolation in magnetic field-line tracking, then discusses the conditions in which they are most appropriate, and quantifies the effectiveness of parallel computing in the approximation procedures.

This paper presents the results of detonation parameters for ammonium nitrate-polyhydroxy alcohol mixtures and ternary explosive compositions modified by flaked aluminium. The detonation velocities, overpressures of blast waves and their specific impulses were determined. It was shown that the viscosity of liquid fuels is the leading property that determines the detonation parameters of the tested compositions.