We analyzed United States Federal Energy Regulatory Commission (FERC) documents prepared for 29 recently licensed hydropower projects and created two novel datasets to improve understanding of the environmental study life cycle, defined here as the process that begins with an environmental study being requested by a hydropower stakeholder or regulator, and ends with the study either being rejected or approved/conducted. Our two datasets consisted of summaries of information taken from (1), study determination letters prepared by FERC for 23 projects that were using the integrated licensing process, and (2), environmental study submittals and issuances tracked and attributed to seven projects using the FERC record. Our objective was to use the two resulting environmental life cycle datasets to understand which types of environmental studies are approved, rejected, and implemented during FERC licensing, and how consistently those types of studies are required across multiple hydropower p... [more]

Fast-growing methods of automatic data acquisition allow for collecting various types of data from the production process. This entails developing methods that are able to process vast amounts of data, providing generalised knowledge about the analysed process. Appropriate use of this knowledge can be the basis for decision-making, leading to more effective use of the company’s resources. This article presents the approach for data analysis aimed at determining the operating states of a wheel loader and the place where it operates based on the recorded data. For this purpose, we have used several methods, e.g., for clustering and classification, namely: DBSCAN, CART, C5.0. Our approach has allowed for the creation of decision rules that recognise the operating states of the machine. In this study, we have taken into account the GPS signal readings, and thanks to this, we have indicated the differences in machine operation within the designated states in the open pit and at the mine bas... [more]

Combustion processes continue to be essential for the energy supply sector. A reliable energetic evaluation of these processes is crucial, particularly since the pollutants resulting from combustion have a significant impact on global warming. This work evaluates a combustion using the exergetic evaluation and the Physical Optimum (PhO) as it is described in VDI-Guideline 4663. Differences between PhO and exergy are investigated, allowing a distinct differentiation and examining the PhO’s added value in combustion analysis. Based on the evaluation of a simulated methane combustion, this paper shows that the PhO-Factor may be used to evaluate combustion processes. However, it shows that the PhO of a combustion process is a simplification of this fuels exergy and does not provide advantages to the exergy evaluation. Nevertheless, an adaption of the PhO is not carried out in the context of this work since the minimal deviation of the simulated energy indicators currently cannot justify an... [more]

The rapid economic growth observed in Central European countries in the last thirty years has been the result of profound political changes and economic liberalization. This growth is partly connected with reducing carbon dioxide (CO2) emissions. However, the problem of CO2 emissions seems to remain unresolved. The aim of this paper is to test whether the Environmental Kuznets Curve (EKC) hypothesis holds true for Central European countries in an annual sample data that covers 1995−2016 in most countries. We examine cointegration by applying the Autoregressive Distributed Lag bound testing. This is the first study examining the relationship between CO2 emissions and economic growth in individual Central European countries from a long-run perspective, which allows the results to be compared. We confirmed the cointegration, but our estimates confirmed the EKC hypothesis only in Poland. It should also be noted that in all nine countries, energy consumption leads to increased CO2 emissions... [more]

Semi-transparent Building Integrated Photovoltaics provide a fresh approach to the renewable energy sector, combining the potential of energy generation with aesthetically pleasing, multi-functional building components. Employing a range of technologies, they can be integrated into the envelope of the building in different ways, for instance, as a key element of the roofing or façade in urban areas. Energy performance, measured by their ability to produce electrical power, at the same time as delivering thermal and optical efficiencies, is not only impacted by the system properties, but also by a variety of climatic and environmental factors. The analytical framework laid out in this paper can be employed to critically analyse the most efficient solution for a specific location; however, it is not always possible to mitigate energy losses, using commercially available materials. For this reason, a brief overview of new concept devices is provided, outlining the way in which they mitiga... [more]

The purpose of the article is to determine how personality traits (extraversion, neuroticism, conscientiousness, agreeableness and openness to experience) affect organizational citizenship behaviors for the environment (OCBE), especially in the context of energy saving. The purpose is also to verify the hypothesis that this impact is significantly moderated by individuals’ demographic characteristic (sex, age, length of service, work type and economic sector of employment). To achieve the purposes, a survey was conducted in 2020 on 454 working people from Poland. The analysis was based on structural equation modeling (SEM). The research model assumed that particular types of personality affect direct and indirect OCBEs, including energy-saving patterns. The model also included the aforementioned demographic characteristics of respondents. I proved that personality traits have a significant impact on direct and indirect organizational citizenship behaviors for the environment. In the ca... [more]

Bottom-fixed offshore wind turbines are generally built on continental-shelf sections that are morphodynamically active due to their shallow depths and severe wave and current conditions. Such sites are commonly protected against scour to prevent the loss of structural stability. Scour protection can be designed using static or dynamic solutions. Designing dynamic protection requires experimental validation, especially for singular or unconventional structures. This article presents an experimental method for the laboratory analysis of scour protection for jacket foundations placed at morphodynamically active sites. The test campaign was conducted within the project East Anglia ONE (UK) as part of the asset owner studies and aimed to evaluate operation and maintenance (O&M) aspects, independent of the contractor’s original design assessments. The physical experiments explored morphodynamic changes on the sea bottom and their importance to scour protection, as well as the importance of... [more]

Globally, 2.8 billion people still cook with biomass, resulting in health, environmental, and social challenges; electric cooking is a key option for a transition to modern energy cooking services. However, electric cooking is assumed to be too expensive, grids can be unreliable and the connection capacity of mini-grids and solar home systems is widely assumed to be insufficient. Developments in higher performance and lower cost batteries and solar photovoltaics can help, but they raise questions of affordability and environmental impacts. The range of issues is wide, and existing studies do not capture them coherently. A new suite of models is outlined that represents the technical, economic, human, and environmental benefits and impacts of delivering electric cooking services, with a life-cycle perspective. This paper represents the first time this diverse range of approaches has been brought together. The paper illustrates their use through combined application to case studies for t... [more]

This article seeks to propose a waste-management model based on qualitative and quantitative research. Specifically, an analysis of the flow of municipal waste was carried out, with the case involved being that of the biodegradable waste generated in households of Poland’s Łódź Metropolitan Area, which is heterogeneous from the points of view of both settlement structure and land use. The analysis of flows of waste then served an evaluation of the system of waste management in the study area, while also representing an important input into a process of identification of problems and possible solutions via so-called PULL (“Peri-Urban Living Lab”) workshop methodology. Indeed, the research detailed here was participatory throughout (from the stages of problem identification through to conclusion-drawing). All of these stages to the work were kept cohesive through the use of an advanced tool allowing for both analysis of the given area and the devising of strategies by which circular econ... [more]

This research paper studied the environmental impact of using methane fuels for supplying internal combustion engines. Methane fuel types and the methods of their use in internal combustion engines were systematized. The knowledge regarding the environmental impact of using methane fuels for supplying internal combustion engines was analyzed. The authors studied the properties of various internal combustion engines used for different applications (specialized engines of power generators—Liebherr G9512 and MAN E3262 LE212, powered by biogas, engine for road and off-road vehicles—Cummins 6C8.3, in self-ignition, original version powered by diesel fuel, and its modified version—a spark-ignition engine powered by methane fuel) under various operating conditions in approval tests. The sensitivity of the engine properties, especially pollutant emissions, to its operating states were studied. In the case of a Cummins 6C8.3 modified engine, a significant reduction in the pollutant emission owi... [more]

Wine batch distillation in a copper pot still heated directly by combustion is unusual. It is a niche sector. Few studies are available on the subject and even fewer have studied it from a thermal point of view. In a context of ecology awareness and regularly increasing gas taxes, finding less energy consuming and more performing solutions has become necessary. Two methods already exist to recover energy for such pot stills, however improvements could be made. The present study focuses on the heating zone of an experimental pot still. First, a thermal diagnosis based on a nodal model is conducted in transient regime. The major sites of energy expenditure and waste are thus identified and quantified. Results highlight significant losses both in combustion smoke and by conduction to the environment resulting from a limited thermal performance of the system. Proposals are then made to enhance it. For instance, the preheating could be optimized and more thermal waste could be recovered.

Remote rural populations do not often have the luxury of viable multisource electricity generation systems. Considering fossil fuels for remote populated areas is not often a viable option due to the fuel transportation costs and the population’s socioeconomic status. Extending the grid is often economically prohibitive. This paper proposes possible ways in which Mali could increase the rate of population with access to electricity by 2050 using Low Emission Analysis Platform (LEAP) and geographical information tools. The current energy situation is assessed, and multiple demand and supply scenarios are created to find the most viable option in environmental and economic dimensions. A minimum of 50% reduction of biomass consumption in the residential sector and a maximum of 71% was achieved through the combination of grid extension and decentralized solar PV. Solar PV becomes the preferable option when enough time for the effects of electricity on income is given. When these effects ar... [more]

Practices of corporate social responsibility (CSR), especially in organizations providing key services, related to the supply of fuel, water and energy, are extremely important from the point of view of identifying stakeholders with the functioning of enterprises in line with the principles of a closed loop economy. The article discusses the origins and evolution of the concept of corporate social responsibility, with particular emphasis on the water supply and sewage industry. The research problem was the perception and expectations of stakeholders toward prosocial activities of PWiK Rybnik (Sewage and Water Supply Ltd. Rybnik). The hypothesis assumed in the study was that the external stakeholders of PWIK Rybnik positively assess the company’s involvement in the tasks carried out as part of corporate social responsibility, they notice the involvement in educational activities and additional initiatives of PWIK that improve the quality of life of its inhabitants. For the purpose of th... [more]

The electricity market in Brazil is basically organized under two parts: the regulated market, where energy is traded through auctions, and the free market, where market participants freely negotiate the price and quantity of electricity. Although revenues obtained in the regulated market tend to be lower than in the free market, the auctions’ results show that investors still value the lesser degree of uncertainty associated with the regulated market. However, a growing interest in the free market by investors is recognized since the price of electricity tends to be higher. Therefore, this study investigates four free market price scenarios to assess the expected return for investors, using the traditional discounted cash flow approach complemented with Monte Carlo simulation to address market uncertainty. The study breaks new ground by capturing the weekly price fluctuations and including the price elasticity of demand of the free market. The results seem to indicate that the disclos... [more]

State-mandated renewable portfolio standards affect substantial portions of the total U.S. electricity supply. Renewable portfolio standards are environmentally motivated policies, yet they have the potential to greatly impact economy. There is not an agreement in the literature on the impact of renewable portfolio standards policies on regional economies, especially on job creation. By integrating various methodologies including econometrics, geographic information system, and input−output analysis into a unique system dynamics model, this paper estimates the economic and environmental impacts of various renewable portfolio standards scenarios in the state of New Mexico, located in Southwestern U.S. The state is endowed with traditional fossil fuel resources and substantial renewable energy potential. In this work we estimated and compared the economic and environmental tradeoffs at the county level under three renewable portfolio standards: New Mexico’s original standard of 20% renew... [more]

Sustainable development can be achieved when economic development does not produce environmental deterioration. In this context, the aim of the paper is to evaluate the effects of economic development on GHG emissions in the Baltic States (Latvia, Letonia, and Lithuania), and in Hungary, the Czech Republic, Slovakia, and Poland (the Visegrád Group or V4 countries) in the period of 1996−2019. The study introduces dynamic ARDL panels in the context of the traditional environmental Kuznets curve (EKC) and renewable Kuznets curve (RKC). The results indicated an inverse-N-shaped and a U-shaped pattern. Energy consumption and labour productivity enhanced pollution, while domestic credit to the private sector, as a share of GDP, and renewable energy consumption supported environmental protection. The implications of these results might help these countries to achieve the targets of the European Green Deal related to the reduction of pollution and the attainment of net zero emissions by 2050.... [more]

LCA analysis with 16 impact categories was used for the comparison of two developed combustion technologies: Scenario I—the combustion of meat bone meal produced from all types of meat waste; Scenario II—the combustion of meat bones from the production of meat products. The key hotspots determined were electricity and natural gas consumption, covering as much as 98.2% of the total influence on the environment in Scenario I and 99.3% in Scenario II. Without taking into account the environmental burdens avoided, the LCA analysis showed that Scenario I was assessed to have 71.2% less environmental impact. The avoided burdens approach changed the relationship between the two scenarios. The absolute value score for the overall environmental impact shows that Scenario II can be more environmentally beneficial than Scenario I; however, Scenario I allowed the elimination of all types of Polish meat waste, and Scenario II could only be carried out in meat production units for the elimination of... [more]

For decades, among other industries, the construction sector has accounted for high energy consumption and emissions. As the energy crisis and climate change have become a growing concern, mitigating energy usage is a significant issue. The operational and end of life phases are all included in the building life cycle stages. Although the operation stage accounts for more energy consumption with higher carbon emissions, the embodied stage occurs in a time-intensive manner. In this paper, an attempt has been made to review the existing methods, aiming to lower the consumption of energy and carbon emission in the construction buildings through optimizing the construction processes, especially with the lean construction approach. First, the energy consumption and emissions for primary construction materials and processes are introduced. It is followed by a review of the structural optimization and lean techniques that seek to improve the construction processes. Then, the influence of thes... [more]

China recently implemented a “Green Mine” policy focused on promoting the filling method, aiming to mitigate the environmental impacts of underground mining; nevertheless, quantitative inventories have rarely been provided to support or negate such promotion, especially from a life-cycle perspective. Accordingly, this paper proposes a bottom-up model for estimating life-cycle greenhouse gas (GHG) emissions from underground metal mines using either filling or caving methods. Two filling-based (Luohe and Longtangyan) and two caving-based (Maogong and Xiaowanggou) iron mines were studied; their direct GHG emissions were 0.576, 0.278, 2.130, and 1.425 tons of carbon dioxide equivalent per kiloton-extracted ore (t CO2 eq/kt), respectively. When indirect GHG emissions were considered, the results increased to 17.386, 15.211, 5.554, and 5.602 t CO2 eq/kt, respectively. In contrast to popular belief, such results demonstrate that promoting the filling method can potentially raise the overall G... [more]

Although the technologies involved in converting saline gradient energy (SGE) are rapidly developing, few studies have focused on evaluating possible environmental impacts. In this work, the environmental impacts of a hypothetical 50 kW RED plant installed in La Carbonera Lagoon, Yucatan, Mexico, are addressed. The theoretical support was taken from a literature review and analysis of the components involved in the pressure retarded osmosis (PRO) and reverse electrodialysis (RED) technologies. The study was performed under a three-stage scheme (construction, operation, and dismantling) for which the stress-inducing factors that can drive changes in environmental elements (receptors) were determined. In turn, the possible modifications to the dynamics of the ecosystem (responses) were assessed. Since it is a small-scale energy plant, only local impacts are expected. This study shows that a well-designed SGE plant can have a low environmental impact and also be of benefit to local ecotou... [more]

This article presents the research on the analysis of the impact of social isolation caused by the COVID-19 pandemic on gaseous air pollutant concentrations. For this purpose, the authors presented (thermal maps) and analyzed the concentrations of selected gases such as NO2, CO, SO2, and PM2.5 particles during the strict quarantine period in Poland and other EU countries. Statistical analysis of the concentration level of these gases was performed. It was noticed that in Poland, Germany, and France, the concentrations of such gases as CO, NO2, and PM2.5 particles decreased, while in Italy and Spain, the tendency was the opposite. To verify whether the discovered dependencies are not a natural continuation of the trends shaping the given phenomenon, the time series of gas and PM2.5 particle emissions were analyzed. On this basis, the emission forecast up to 2023 was created, using the ARIMA class models. The obtained results allowed to construct five scenarios for the development of NO2... [more]

Deteriorating air quality is one of the most important environmental factors posing significant health risks to urban dwellers. Therefore, an exploration of the factors influencing air pollution and the formulation of targeted policies to address this issue are critically needed. Although many studies have used semi-parametric geographically weighted regression and geographically weighted regression to study the spatial heterogeneity characteristics of influencing factors of PM2.5 concentration change, due to the fixed bandwidth of these methods and other reasons, those studies still lack the ability to describe and explain cross-scale dynamics. The multi-scale geographically weighted regression (MGWR) method allows different variables to have different bandwidths, which can produce more realistic and useful spatial process models. By applying the MGWR method, this study investigated the spatial heterogeneity and spatial scales of impact of factors influencing PM2.5 concentrations in m... [more]

In the face of contemporary ecological problems, including the influence of transport and mobility on the greenhouse effect, policy makers see a solution in the technology of electric vehicles (EVs). This innovation has appeared in the automotive market around the world. In this article, Rogers’ innovation diffusion concept was used to determine if and when EVs could replace combustion engine vehicles. The aim of the article is to analyze the current situation of innovative electric vehicle (EV) technology on the European Union (EU) market and the potential and possible directions of its market diffusion. As a result of the analysis of the current situation of the EU automotive markets, three groups of countries with different market conditions regarding the development of EV technology were distinguished. The classification was carried out using the K-means clustering algorithm, based on the current level of innovation and the level of development of the LPG-(Liquefied Petroleum Gas)... [more]

The issue of environmental management systems in food processing companies is gaining importance due to the need to reduce water withdrawal, wastewater, air emissions, and waste generation. New technological solutions and innovations can reduce the negative effects of the enterprises’ production facilities on the environment. In Poland, the phenomenon of increasing use of the amount of renewable energy sources is influenced by, e.g., adopted national and EU legislation, development of new technologies in the field of energy, and increasing awareness of producers and consumers in the field of ecology and environmental protection. It is also important that the state creates favorable conditions for the use of renewable energy in micro-installations. The application goal of the study is to develop a procedure for improvement of the environmental management systems for food processing companies and increase the awareness of potential use and implementation of renewable energy sources by fo... [more]

The future of the energy sector depends on the younger generation. The paper presents the results of the study, the aim of which was to determine to what extent younger generation is pro-ecological and pro-social, and whether they will include pro-ecological and pro-social activities in the management of energy companies. It is especially important to implement sustainable management in the energy sector. The study found that only 33.9% of young people are highly pro-ecological and 28.6% highly pro-social. As many as 83.0% of the younger generation show low and medium interest in environmental protection. Declarations of young people concerning high degree of inclusion of pro-ecological and pro-social activities in management are at the level of 49.9% and 58.1%. However, in many cases, these intentions do not coincide with the high pro-ecological and pro-social attitude of young people. This means that their future activity for sustainable management may be low. According to the survey... [more]