The water−energy−food nexus has captured the attention of many researchers and policy makers for the potential synergies between those sectors, including the development of self-sustainable solutions for agriculture systems. This paper poses a novel design approach aimed at balancing the trade-off between the computational burden and accuracy of the results. The method is based on the combination of static energy hub models of the system components and rule-based control to simulate the operational costs over a one-year period as well as a global optimization algorithm that provides, from those results, a design that maximizes the solar energy contribution. The presented real-world case study is based on an isolated greenhouse, whose water needs are met due to a desalination facility, both acting as heat consumers, as well as a solar thermal field and a biomass boiler that cover the demand. Considering the Almerian climate and 1 ha of tomato crops with two growing seasons, the optimal... [more]

The use of energy is a precondition for global economic and civilisational development. However, the growing demand for energy is depleting traditional energy resources and, most importantly, causing environmental pollution, mainly through the emission of greenhouse gases. As energy is necessary for the functioning of all sectors of the economy, such as industry, services, transport as well as households, these sectors are the largest contributors to energy consumption. Renewable energy sources are an alternative to generating energy from conventional fossil fuels. The main objective of this paper was to determine and compare the level, trends and variation in energy consumption by different economic sectors in countries of the European Union in 2010−2019. An analysis of the share of renewable energy consumption in different economic sectors was also carried out, as well as an assessment of the relationship of these indicators with the level of economic development of the countries and... [more]

In the case of public buildings with ceiling heating and mechanical ventilation, radiant temperature asymmetry caused by the warm ceiling and draught occur simultaneously. The currently available literature does not offer an exhaustive description of the comfort conditions resulting from such a thermal environment. This research focuses on complementing the available knowledge, using instrumental measurements, as well as subject measurements carried out on 20 individuals. Relying on these measurements, the purpose of the research is to support the understanding of the combined mechanisms of action of the two local discomfort parameters. The main result of this research is that, if the predicted percentage dissatified is less than 6%, the radiant temperature asymmetry is in an interval of 5−15 °C, and the draught rate is 15% or 25%, the actual mean vote and the predicted mean vote values differ significantly, and the actual mean vote is always lower, with a few exceptions. In addition,... [more]

Underground mining engineers and planners in our country are faced with extremely difficult working conditions and a continuous shortage of money. Production disruptions are frequent and can sometimes last more than a week. During this time, gate road support is additionally exposed to rock stress and the result is its progressive deformation and the loss of functionality of gate roads. In such an environment, it is necessary to develop a low-cost methodology to maintain a gate road support system. For this purpose, we have developed a model consisting of two main phases. The first phase is related to support deformation monitoring, while the second phase is related to data analysis. To record support deformations over a defined time horizon we use laser scanning technology together with multivariate singular spectrum analysis to conduct data processing and forecasting. Fuzzy time series is applied to classify the intensity of displacements into several independent groups (clusters).

In recent decades, there has been a positive trend in world politics in the field of promoting territories’ sustainable development. At the same time, one of the most relevant areas is to promote the transition to renewable energy sources (RES), which correspond to one of the UN’s goals—Sustainable Development Goal 7 (SDG 7) “Ensuring universal access to affordable, reliable, sustainable and modern energy sources for all”. This article is devoted to the study of the renewable energy sources’ impact on the sustainable development of the Russian Arctic zone. The authors chose the level of carbon dioxide (CO2) emissions as an indicator reflecting the impact of RES on sustainable development, since this factor is one of the main factors for assessing trends in the activities of countries aimed at achieving progress on most of the Sustainable Development Goals of territories. The hypothesis of the relationship between the use of renewable energy sources and the achievement of progress on th... [more]

When developing a sustainability plan in a complex and heavily urbanized territory, one of the most relevant options available is installing rooftop photovoltaic (PV) panels. Thus, it is essential to determine the amount of available surface and the potential impact of such installations on the energy and emission budget of the area. Instead of processing remotely sensed imagery, which is a long process and does not allow considering the buildings’ ownership, this study develops an approach based on a cluster analysis of the urban/morphological characteristics of the municipalities. Once a clear group diversification is obtained, the roof surface of the center of gravity of each cluster is extrapolated to all similar settlements. This, together with the information of local solar irradiation, allowed us to compute each cluster’s potential solar energy production and its capability to respond to the local energy demand, a key parameter to decide about the possibility of a local smart el... [more]

The importance of CO2 removal from the atmosphere has long been an essential topic due to climate change. In this paper, the authors aim to demonstrate the suitability of the underground reservoirs for CO2 storage based on their geological characteristics. The research addressed the potential of geological formations for fossil CO2 storage in the Baltic States to support the goal of achieving carbon neutrality in the region. The geological, technical, and economic feasibility for CO2 storage has been assessed in terms of carbon sequestration in geological structures and the legal framework for safe geological storage of fossil CO2. Results indicate that prospective structural traps in the Baltic States, with reasonable capacity for CO2 storage, occur only in Southwestern Latvia (onshore) and in the Baltic Sea (offshore), whilst other regions in the Baltics either do not meet basic geological requirements, or have no economically feasible capacity for CO2 storage. Based on the examinati... [more]

Fire and explosion accidents of oil-filled electrical transformers are leading to negative impacts, not only on the delivery of energy, but also on workplace health and safety as well as the surrounding environment. Such accidents are still being reported, regardless of applying the regular maintenance strategy in the power plants. The purpose of this paper is to integrate a sustainability perspective into the maintenance strategy. The problem addressed is: how can we approach the relevant cost-effective sustainable maintenance for oil-filled electrical transformers? For this purpose, an empirical study in a power plant in Kuwait was introduced. The first stage was to carry out a sustainability assessment using the ABCD procedure. In this procedure, gaps to approach sustainability were identified and actions prioritized to close these gaps were demonstrated. Applying this procedure yielded an early fault diagnosis (EFD) model for achieving cost-effective sustainable maintenance using a... [more]

The Longtan Formation of the Upper Permian in the Sichuan Basin has become a significant target for shale gas exploration in recent years. Multiple methods, including outcrop observations, thin sections, total organic matter content, X-ray diffraction and scanning electron microscopy were used to investigate the mineralogy, shale lithofacies assemblages and their relationships with the deposition environment. The mineral composition of the Longtan Formation has strong mineral heterogeneity. The TOC values of the Longtan Formation have a wide distribution range from 0.07% to 74.67% with an average value of 5.73%. Four types of shale lithofacies assemblages of the Longtan Formation could be distinguished, as clayey mudstone (CLS), carbonaceous shale (CAS), siliceous shale (SS) and mixed shale (MS) on the basis of mineral compositions. The TOC values of various types of shale lithofacies assemblages in the Longtan Formation varied widely. The shore swamp of the Longtan Formation is most i... [more]

Although the thermal mass of floors in buildings has been demonstrated to help shift cooling load, there is still a lack of information about how floor covering can influence the floor’s load shifting capability and buildings’ demand flexibility. To fill this gap, we estimated demand flexibility based on the daily peak cooling load reduction for different floor configurations and regions, using EnergyPlus simulations. As a demand response strategy, we used precooling and global temperature adjustment. The result demonstrated an adverse impact of floor covering on the building’s demand flexibility. Specifically, under the same demand response strategy, the daily peak cooling load reductions were up to 20−34% for a concrete floor whereas they were only 17−29% for a carpet-covered concrete floor. This is because floor covering hinders convective coupling between the concrete floor surface and the zone air and reduces radiative heat transfer between the concrete floor surface and the surro... [more]

Accurate reliability and residual life analysis is paramount during the designing of reliability requirements and rotation of power measuring equipment (PME). However, the sample dataset of failure is usually sparse and contains inevitable pollution data, which has an adverse effect on the reliability analysis. To tackle this issue, this paper first applies nonlinear regression to fuse the failure rate and environmental features of PME collected from various locations. Then, a novel binary hierarchical Bayesian probability method is proposed to model the failure trend and identify outliers, in which the outlier identification structure is embedded into hierarchical Bayesian. Integrating binary hierarchical Bayesian and the bagging method, a binary hierarchical Bayesian with bagging (BHBB) framework is further introduced to improve predictive performance in a small sample dataset by resampling. Last, the influence of typical environmental features, failure rate, and reliability are obta... [more]

The assessment of performance of water companies is essential for their regulation. In doing so, several variables and models can be employed. This study evaluates and compares the performance of a sample of English and Welsh water companies from the operational, environmental and eco-efficiency perspectives by applying the non-radial data envelopment analysis range adjusted measure model. This methodological approach allows integrating greenhouse gas emissions as undesirable output. The results indicated that the water industry performed well from an operational perspective. However, environmental inefficiency considerably exists which illustrates the difficulties of the water companies in reducing greenhouse gas emissions. The average eco-efficiency was 0.783 which means that while expanding water services, water companies could further reduce costs and carbon emissions by 11.7% on average. Other factors such as water treatment complexity and population density significantly affect w... [more]

Industrial environments are heterogeneous systems that create challenges of interoperability limiting the development of systems capable of working collaboratively from the point of view of machines and software. Additionally, environmental issues related to manufacturing systems have emerged during the last decades, related to sustainability problems faced in the world. Thus, the proposed work aims to present an interoperable solution based on events to reduce the complexity of integration, while creating energetic profiles for the machines to allow the optimization of their energy consumption. A publish/subscribe-based architecture is proposed, where the instantiation is based on Apache Kafka. The proposed solution was implemented in two robotic cells in the automotive industry, constituted by different hardware, which allowed testing the integration of different components. The energy consumption data was then sent to a Postgres database where a graphical interface allowed the opera... [more]

The scale of waste formation from coal-fired generation is significant and tends to grow steadily in the context of the global use of coal for power production. This paper covers the problems and current opportunities for recycling coal fly ash waste from coal generation from the position of a stakeholder approach, namely, identification of the main participants and determination of the effects for economic agents in coal fly ash recycling projects. Based on the method of economic modeling and the empirical assessment of project efficiency, this paper presents alternative patterns of stakeholder interaction in the process of implementing coal fly ash recycling projects, estimates the effects of using coal fly ash, and identifies conflicting interests between stakeholders. It is shown that the reason behind the low interest of the Russian private sector in the processing of coal fly ash is the lack of stimulating market mechanisms for manufacturers and consumers of ash products, the hig... [more]

Socially expected innovations are innovations considering sustainable development. The subject of the paper focuses on the business model of a start-up providing energy saving services to local government units using smart technologies of Industry 4.0 in the aspect of low touch economy. A methodical critical literature review including quantitative and qualitative assessment, stakeholder analysis and business modeling techniques using Business Model Canvas and Triple Layer Business Model Canvas (TLBMC) was conducted. In addition, an in-depth analysis of a start-up case study was conducted. The research questions are related to the interpretation of the organization’s business data and methods of interpreting Sustainability 3.0 business solutions. The research questions were directed to the challenges regarding the creation of the organization’s sustainable business model architecture and the Business Sustainability 3.0 sustainable business imaging concept. The research objective is to... [more]

Increasing energy efficiency within the industrial sector is one of the main approaches in order to reduce global greenhouse gas emissions. The production and processing of aluminium is energy and greenhouse gas intensive. To make well-founded decisions regarding energy efficiency and greenhouse gas mitigating investments, it is necessary to have relevant key performance indicators and information about energy end-use. This paper develops a taxonomy and key performance indicators for energy end-use and greenhouse gas emissions in the aluminium industry and aluminium casting foundries. This taxonomy is applied to the Swedish aluminium industry and two foundries. Potentials for energy saving and greenhouse gas mitigation are estimated regarding static facility operation. Electrolysis in primary production is by far the largest energy using and greenhouse gas emitting process within the Swedish aluminium industry. Notably, almost half of the total greenhouse gas emissions from electrolysi... [more]

Typically, oil pollution cleanup procedures following first response actions include dispersion. Crude oil is biodegradable, and its bioavailability can be increased when dispersed into very fine droplets by means of chemical surfactants. Although their use is widely spread in many applications, the latter may prove toxic, depending on the extent of use. The use of biological means, such as bioremediation and biosurfactants, has emerged over the past years as a very promising ‘green’ alternative technology. Biosurfactants (BSs) are amphiphilic molecules produced by microorganisms during biodegradation, thus increasing the bioavailability of the organic pollutants. It is their biodegradability and low toxicity that render BSs as a very promising alternative to the synthetic ones. Alcanivorax borkumensis SK2 strain ability to produce BSs, without any impurities from the substrate, was investigated. The biosurfactant production was scaled up by means of a sequencing batch reactor (SBR) an... [more]

Energy consumption impacts the environment, humans’ well-being, comfort and quality of life. The article aimed to develop the original model of energy consumer segmentation, based on behavioural variables, which influence consumer decisions and motivations regardless of demographic, geographic and socio-cultural differences. The innovative contribution is the segmentation procedure, which fills the existing research gap and can be treated as a universal tool serving various groups of stakeholders for creating and implementing sustainable development policies. The methodology used for the segmentation is based on the original algorithm and involves classifying a consumer into the most appropriate group based on the measurement of the distance between the ideal class representative and a particular respondent. Several distance measures (e.g., Sokal−Michener, Goodall, Lin) were used, while the similarity of those classifications was verified using the adjusted Rand index. The segmentation... [more]

The pumped hydropower energy storage (PHES) assessments carried out so far have been focused on large water bodies obtained from global or restricted-use databases, or, on the other hand, on the application of methodologies to specific areas focusing on the detection of dams. In addition, many assessments do not include data optimization, or include it at the end of the process and are subject to the prior application of restrictions, often stipulated with subjective criteria. The aim of this article is to design a universal and easily applicable methodology for the assessment of viable PHES potential, which provides immediate and reliable results to assist in the energy planning of a given territory. It is classified in ravine basins, including an optimization before using the restrictions. The island of Gran Canaria is taken as the territory of application, whose density of dams is the highest in the world and whose share of hydroelectric energy is, at present, null; besides, no PHES... [more]

Thermal environment in sports facilities is probably one of the most important parameters, determining the safety and performance of athletes. Such facilities, due to the required operating temperature and physical activity of users, are a serious challenge for both investors and administrators, especially in summer. The additional criterion of low energy consumption in extremely airtight and well-insulated passive buildings often results in overheating of the interior, creating considerable economic and operational problems. The significant need to reduce solar gain during periods of high outdoor temperatures for low-energy buildings prompts a variety of design solutions. Sun shading systems, as an indispensable element of glazed surfaces, are designed to control the amount of solar radiation reaching the building interior, at the same time creating a favorable microclimate inside. This article analyzes the effects of sun shading, which have actually been applied and modified on the s... [more]

Water management and energy recovery can improve a system’s sustainability and efficiency in a cost-effective solution. This research assesses the renewable energy sources used in the water sector, as well as the related water sector performance indicators within Portuguese water management systems. A deep analysis of 432 water entities in Portugal, based on ERSAR data base, was conducted in order to identify factors to be improved regarding the system efficiency. On the other hand, the potential energy recovery developed in the REDAWN project was also used as a reference for the application of micro hydropower (MHP) solutions in the water sector. A water and energy nexus model was then developed to improve the systems efficiency and sustainability. A real case study in Africa, the Nampula water supply system, located in Mozambique, was selected as a promising potential for energy recovery. The application of a pump-as-turbine (PAT) allows the reduction in system costs and environmenta... [more]

European Union climate goals aim to increase waste incineration instead of landfills. Incineration of waste increases the mismatch between heat production and consumption since waste is generated constantly but energy demand varies significantly between seasons. Seasonal energy storage is suggested to alleviate this mismatch. However, traditional seasonal storage options have not been cost-effective investments for energy companies. This paper explores the feasibility of a large cavern thermal energy storage in a large district heating system with waste incineration. First, 62 one-year optimisations for seasonal storage with varying size and power were conducted to determine the economic performance of the system. Second, the annual system emissions were estimated. The results show that even small capacity seasonal storage reduces system emissions significantly. Return on investment for the most profitable storage with a capacity of 90 GWh and power of 200 MW range between 3.6% and 9.4... [more]

The maximum entropy bootstrap for time series is applied in this study to investigate the nexus between carbon emissions from electricity generation and the gross domestic product, using a bivariate framework for eight Middle Eastern countries between 1995 and 2017. The sample under study includes oil-producing countries such as Bahrain, Iran, Iraq, Kuwait, Oman, Qatar, Saudi Arabia, and United Arab Emirates. As the electricity generation in these economies relies mainly on oil and gas, finding out the existence and direction of the relationship between the two considered variables has remarkable implications for policymakers and governments in these countries to achieve both higher economic growth and environmental protection. As expected, this nexus is validated for all countries in the sample but not in all models, time periods, and lags. Therefore, policymakers can set appropriate electricity conservation policies based on these varied empirical findings to boost economic growth wi... [more]

The aim of the study was to analyze emissions in the supply chain and to identify, based on a literature analysis, which supply chain strategies could contribute to reducing these emissions. A broad spectrum of new supply chain strategy solutions was identified and, based on simulations of selected products, conclusions were drawn and the advantages and disadvantages of theoretical solutions were presented for individual cases. A critical analysis of the literature and simulation methods were used to illustrate the problem presented in this paper, to identify the factors causing greenhouse gas emissions and to draw conclusions in the form of proposals to redesign existing strategies, considering the factors determining the increase in pollution caused by the performed logistics processes. The results of the simulations and the literature analysis indicate that solutions related to the redesign of strategies must consider the specificity of the product and the nature of the chain. Not a... [more]

Human functioning related to living and economic activity involves generating an increasing amount of sewage and sludge, which needs to be subjected to advanced processes of treatment, neutralization, and management. The deterioration in the susceptibility of excess sludge to biochemical decomposition observed under anaerobic conditions leads to the development and application of highly effective methods of wastewater treatment based on the removal of biogenic compounds using activated sludge, with a high degree of sludge thickening obtained in mechanical facilities. The concentration of volatile fatty acids, being an important intermediate product of anaerobic stabilization, directly determines biogas production efficiency. This study aimed to determine the effect of chemical disintegration with peracetic acid on biogas production efficiency using methane fermentation of pretreated sludge. Intensification of the hydrolysis phase is an important determinant of the efficiency of biochem... [more]