The twentieth century started with engineers’ new concepts and ideas to develop the built environment, with ideas ranging from reducing weight to automated industrialisation, enhancing energy efficiency, etc. However, they failed to predict the negative impact of automation on the environment and its resources. Therefore, future technologies proposed by engineers should consider the adverse effects on nature and the surrounding ecosystem. Using the science of ecology and integrating it into building typology can help avoid unwanted scenarios. Such technologies prioritise the performance of buildings and cities by using simulation tools to explore more ideas for designing and testing their performance. This work explores the obstacles and challenges opposing the plan to successfully supply Egypt with clean, renewable energy that reaches 42% of its total electricity. Furthermore, some solutions are proposed to tackle those barriers, such as installing thermal cooling systems and ball win... [more]

The scarcity of energy and water resources and rising temperatures due to climate change has set the focus on improving the energy efficiency of power plant thermodynamic cycles to adapt to higher heat sink temperatures and use fewer resources for energy production. In this work, a review of power production thermodynamic cycles is presented: from Brayton to Rankine and combined cycles, alongside particular cycles such as Organic Rankine Cycles, Kalina, Goswami or the more recently developed Hygroscopic Cycle. The efficiency of these cycles and their possible improvements are considered, as well as their environmental impact. Costs associated with existing power plants found in the literature have also been included in the study. The main existing facilities for each cycle type are assessed, and the most sustainable options in terms of resource consumption (fuel, water, etc.) and future perspectives to ensure both their energy efficiency and sustainability are identified.

Growing animal production results in a significant amount of waste, composed of manure, bedding, feed, feathers, etc., whose safe and cost-effective disposal becomes a troublesome challenge. The literature review points out that the higher heating value (HHV) of animal-origin waste reaches 19 MJ/kg (dry basis), which positions it as a promising renewable energy source. Various paths of energy recovery were investigated in the literature, but the thermal processes, particularly combustion and co-combustion, were indicated as the most effective from both technical and environmental points of view. The presented study reviews the fuel characteristics, possible combustion-related challenges, and ash disposal routes of the most popular animal-origin waste: poultry litter and cow (cattle) manure with a slight sight on piggery (swine) manure. When considering animal-origin feedstock as fuel, usually only animal species is given (poultry, cattle, etc.). However, according to the analyzed liter... [more]

The treatment and disposal of sewage sludge is one of the most important and critical issues of wastewater treatment plants. One option for sludge liquidation is the production of fuel in the form of pellets from mixed sewage and paper mill sludge. This study presents the results of the combustion of pelletized fuels, namely sewage and paper mill sludge, and their 2:1 and 4:1 blends in a fluidized bed combustor. The flue gas was analysed after reaching a steady state at bed temperatures of 700−800 °C. Commonly used flue gas cleaning is still necessary, especially for SO2; therefore, it is worth mentioning that the addition of paper mill sludge reduced the mercury concentration in the flue gas to limits acceptable in most EU countries. The analysis of ash after combustion showed that magnesium, potassium, calcium, chromium, copper, zinc, arsenic, and lead remained mostly in the ash after combustion, while all cadmium from all fuels used was transferred into the flue gas together with a... [more]

Historic buildings constitute a specific group of buildings where the possibilities of improving energy efficiency and comfort are significantly limited because of the existing construction features and heritage values. Each building has a different history so the scope of renovation and/or retrofitting must be determined individually for each building. This article presents the methodology of measurement and diagnosis of features of particular importance for energy performance and comfort improvements, based on the example of a historic masonry building located in southern Poland. The first research question was which of the comfort conditions have been exceeded according to measurements. The second issue concerned the necessary extension of the basic determinants of comfort, beyond measurable qualities. A multi-faceted approach to the comfort assessment is proposed, including qualitative research that applies the additional criterion of aesthetic comfort. During the case study diagno... [more]

The energy crisis, the risk of interruptions or irregular supplies of conventional energy carriers, and the need to protect the environment stimulate the search for new solutions to improve the heat balance of buildings with the use of solar energy. In this paper, direct and indirect solar gain systems integrated with the building envelope are discussed. In the context of the identified operational problems, the evolution of the classic Trombe wall was shown in the period 1967−2022. Modifications to the windows and Trombe wall proposed in the reviewed works can significantly reduce the risk of an insufficient supply of heat in the winter season. This review also indicates the impact of climate conditions on the decision-making process involved in the selection of the Trombe wall design with respect to energy−effects optimization. The insufficient thermal insulating capacity of Trombe walls has been diagnosed as the reason why they do not enjoy much popularity in cold and moderate clima... [more]

With economic growth and rising incomes, increasing consumption of fossil energy is leading to environmental pollution and climate change, which requires increased innovative inputs to promote the efficiency of renewable energy use. Considering the important impact of innovation input and climate change on renewable energy consumption, greenhouse gas emissions, and green economic growth, this study uses simultaneous equation and sys-GMM model to explore the dynamic nexus of innovation input, climate change, and energy-environment-growth in OECD and non-OECD countries, with panel data covering 2000 to 2019. The empirical results show that renewable energy consumption in non-OECD countries significantly promoted green economic growth, while OECD countries did the opposite. Moreover, renewable energy consumption significantly reduces greenhouse gas emissions caused by climate change, especially for OECD countries. When the level of economic growth exceeds a certain inflection point, green... [more]

Despite the considerable breakthrough in district heating systems (DHS) globally, there is not yet any policy on developing this technology in Iran. This country has a high range of energy demand, while renewable energies play a minor role in its energy supply chain. Furthermore, the world is going through a transition towards renewable resources, which currently consist of only 10% of the total energy mix. As the first contribution in this area, this paper aims to design a 100% renewable DHS integrated with radiant floor heating for a group of residential buildings in Sarein, Iran. Moreover, the literature proposes a novel approach for combining geothermal energy and Municipal Solid Waste (MSW) to achieve a 100% renewable energy system. Building Information Modeling (BIM) is used for thermal analysis by 3D designing the buildings in SketchUp and OpenStudio and simulating the heat load in EnergyPlus. Three scenarios are presented to better compare the DHS with the decentralized heating... [more]

The environment is seriously threatened by the rising energy demand and the use of conventional energy sources. Renewable energy sources including hydro, solar, and wind have been the focus of extensive research due to the proliferation of energy demands and technological advancement. Wind energy is mostly harvested in coastal areas, and little work has been done on energy extraction from winds in a suburban environment. The fickle behavior of wind makes it a less attractive renewable energy source. However, an energy storage method may be added to store harvested wind energy. The purpose of this study is to evaluate the feasibility of extracting wind energy in terms of hydrogen energy in a suburban environment incorporating artificial intelligence techniques. To this end, a site was selected latitude 33.64° N, longitude 72.98° N, and elevation 500 m above mean sea level in proximity to hills. One year of wind data consisting of wind speed, wind direction, and wind gust was collected a... [more]

In 2019, Chile generated 20 million tons of waste, 79% of which was not properly disposed of, thereby providing an attractive opportunity for energy generation in advanced thermochemical conversion processes. This study presents a techno-economic and environmental assessment of the implementation of Waste-Integrated Gasifier-Gas Turbine Combined Cycle (WIG-GTCC) technology as an alternative for Municipal Solid Waste (MSW) treatment. The studied case assesses the conversion of 14.61 t·h−1 of MSW, which produces a combustible gas with a flow rate of 34.2 t·h−1 and LHV of 5900 kJ·kg−1, which, in turn, is used in a combined cycle to generate 19.58 MW of electrical power. The proposed economic assessment of the technology uses the energy generation processes as a reference, followed by a model for an overall economic evaluation. The results have shown that the profit could be up to USD 24.1 million, and the recovery of investment between 12 and 17 years would improve the environmental impac... [more]

CO2 emissions have been identified as the main driver for climate change, with devastating consequences for the global natural environment. The steel industry is responsible for ~7−11% of global CO2 emissions, due to high fossil-fuel and energy consumption. The onus is therefore on industry to remedy the environmental damage caused and to decarbonise production. This desk research report explores the Bio Steel Cycle (BiSC) and proposes a seven-step-strategy to overcome the emission challenges within the iron and steel industry. The true levels of combined CO2 emissions from the blast-furnace and basic-oxygen-furnace operation, at 4.61 t of CO2 emissions/t of steel produced, are calculated in detail. The BiSC includes CO2 capture, implementing renewable energy sources (solar, wind, green H2) and plantation for CO2 absorption and provision of biomass. The 7-step-implementation-strategy starts with replacing energy sources, develops over process improvement and installation of flue gas ca... [more]

The purpose of the paper is to analyse the relationship between digitalisation of public services (e-government) and ESG factors (environmental, social and economic factors). As public administration is a major stakeholder influencing sustainable development and state governments are aiming to digitise their services, there is a need to better understand the effect of the digital revolution on ESG. This article aims to study the relationship between the E-Government Development Index (EGDI) and ESG factors in 26 European countries. The linear ordering method TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) was used for the study, followed by the Perkal index and the method of optimal predictors’ selection—the Hellwig method. The study is based on the Eurostat data (in the period 2003−2020), and the analysis includes ten variables: Share of environmental taxes in GDP; Exposure to dust air pollution; Greenhouse gas emissions by source sector—carbon dioxide, methane... [more]

This article describes the characteristics of th Oxytree (Paulownia) plant, both in terms of its impact on GHG emissions and its potential use to produce biofuel, i.e., biogas. The described research involved the physico-chemical and elemental analysis of the Oxytree leaf composition and its biogas efficiency depending on the harvesting method. Three different scenarios were considered: the freshest possible leaves—processed immediately after stripping from the living tree; after the first day of collection from pruned or harvested wood; after the first week of collection from pruned or harvested wood. The best results were achieved for the harvest of the freshest leaves—on average 430 m3/Mg (biogas) and 223 m3/Mg (methane) per dry organic mass. The highest yield of biogas in terms of fresh mass (FM) was obtained for leaves fallen and collected after 1 day—123 m3/Mg FM, and 59 m3/Mg FM (methane). Processing Oxytree leaves through anaerobic digestion will contribute to reducing the carb... [more]

The transcritical CO2 (T-CO2) power cycle using low temperature waste heat is a promising technique for energy saving and environmental protection. However, according to the literature, there is no commercialized unit in service yet. This study provides developers a reference to shorten the design phase of the T-CO2 cycle commercialization process. A sensitivity analysis of the system performance, i.e., thermal efficiency and net power output, regarding the isentropic efficiencies of pump (ηp) and expander (ηe) and the heat source temperature (Th,in) has been carried out using MATLAB and NIST REFPROP database. Simple and recuperative configurations are investigated based on their own optimal working pressures. The results show that the enhancement of ηe has a greater influence on improving the system performance, but the improvement will diminish as ηp, ηe, and Th,in increase. Although better system performance can be achieved with higher ηp, ηe, and Th,in, the cost of the system equip... [more]

The technological installations’ characteristics are possible to improve by equipping fans with a frequency-controlled electric drive. However, it can lead to an electromagnetic compatibility problem in the electrical supply system. This problem becomes worse if a large number of fans are included in the technological installation and the electric drives are powered from a substation connected to a limited power source. As an example, in this article we investigate the power supply system of a gas cooling unit with variable-frequency electric drives for fans. The electric drives’ operating mode dependences characterizing the non-sinusoidal voltages and currents of the power source are obtained with the help of simulation modeling in the MATLAB environment with the Simulink expansion package. The typical substation circuit usage for the power supply of a group of fans with a frequency-controlled drive does not meet the requirements of IEEE Standard 519-2014. We can solve the problem of... [more]

In the plan of the European Green Deal, the European Union assumed that by 2050 Europe will become the first climate-neutral continent in the world. This will be supported by alternative (renewable) energy sources (RESs), also termed green energy (GE). Their use should have long-term environmental benefits. To do this, it is necessary to skillfully select RES products. Therefore, the purpose is to develop a method for selecting devices that convert to GE, including not only qualitative criteria, but also environmental criteria and their price. The method is based on customer requirements and expert knowledge. The general concept of the method allows for the assessment of selected qualitative and environmental criteria of products and determining the price of purchase of these products. In a hybrid way, the following techniques were used: SMARTER method, brainstorming (BM), MAP method (alternative-punctual Czechowski’ method), ACJ method (price−qualitative analysis). Based on the result... [more]

This research developed an effective environmental temperature control system for homes and buildings. The study used a photovoltaic panel (PV) and developed a solar installation with thermosiphon circulation, which has a flat solar collector and heat-insulating translucent glass with double glazing with reduced pressure. The coolant is made of thin-walled corrugated stainless pipe. The heat from the solar flux heats the liquid removed from the collector, and cold water from the siphon enters its place. There is a constant circulation of heat, which increases heat transfer efficiency by eliminating additional partitions between the panel and thermal insulation. We have also developed a solar system control controller, which includes an electronic unit with six sensors. The six sensors are controlled by the STM32 programmable Logistics Integrated circuit (FPGA), designed to monitor the entire solar system, and the drives include power relays. The performance of the photovoltaic panel an... [more]

A method for evaluating the dominant seepage channel (DSC) water flooding in a layered sandstone reservoir is proposed and applied in an oilfield based on the water-cut derivative. The water-cut derivative curve of the reservoir with DSC shows double peaks. Therefore, based on the analysis of geology and production characteristics, the evaluation method of DSC is established. The evaluation index is proposed to quantitatively characterize the development degree of DSC and determine its distribution in a water-flooding reservoir. The test data validate that the proposed method can not only accurately determine the DSC and quantitatively evaluate its development degree, but also show its dynamic change. This method will be a powerful guide for water controlling and oil stabilizing in the adjustment stage of sandstone reservoirs.

Systems for determining the position of objects inside buildings have a wide range of applications, such as the surveillance of people’s movements in hospitals, and of goods or mobile robots in warehouse spaces or production halls. Hence, there is a need for the development of methods that could be applied for those purposes. This paper presents the results of research on an experimental system for localizing people being evacuated from a building. The proposed solution was designed as a part of the building evacuation management system. The method used for finding location belongs to the class of proximity-type methods and is based on Received Signal Strength Indicator (RSSI) information of Bluetooth Low-Energy (BLE) devices. The devices used to build the system (BLE receivers) and the evacuee’s wristband (BLE transmitters) are low-budget electronic modules. The paper presents preliminary research and the process of selecting data processing methods, as well as the results of tests of... [more]

A comprehensive assessment was conducted for the electricity dispatch in the Mexican National Interconnected System for the 2017−2021 period, as well as the projected period of 2022−2030, with special attention on emissions and the transition to clean energy. The reported official generation data for the 2017−2021 period were compared to the results of both one- and multi-node dispatch modeling. The officially reported generation mix was found to be sub-optimal in terms of costs and emissions. A small part of the differences can be traced back to transmission constraints. Some of the remaining discrepancies can be explained by out-of-merit order dispatch favoring fossil fuel power plants. While transmission constraints were not critical for the 2017−2021 period, an increasing unbalance between regions with cost-effective generation (exporting regions) and importing regions was found, calling for inter-region transmission corridor reinforcements in the near future. The 2022−2030 emissio... [more]

As the populations of cities grow, it is obvious that they need more and more resources. Energy is currently one of the most desirable resources due to the economic and energy crisis, but it needs to be used in a sustainable manner. There are cities that achieve smart city (SC) status that provide smart policies towards sustainable development. The aim of the present paper is to determine whether citizen engagement in SC can contribute to reduced energy consumption in the current economic crisis. The paper presents an original survey intended to collect primary data and a study conducted based exclusively on qualitative methods. The results concern a broad and multifaceted review of literature concerning SCs, as well as citizens’ engagement and their role in SC development. The study allows understanding of the economic phenomena taking place in SCs and filling the gaps regarding the behavior of SC citizens. It shows that SCs create smart citizens that feel responsible for the environm... [more]

Polymeric insulators have lightweight, excellent hydrophobicity and convenient transportation and installation. They are widely used in the external insulation for distribution and transmission lines. However, due to the long-term effects of pollution, ultraviolet radiation, discharge, temperature, humidity, altitude and other natural and complex environmental and service factors, the silicone rubber and other materials of polymeric insulators gradually age and lose their hydrophobicity and electrical insulation characteristics. The operability is significantly reduced, which seriously affects the safety and reliability of the power system. Hence, there is a need for assessing and evaluating the long-term aging and degradation of polymeric insulators under various operating conditions and environments. In this review, the various aging and characterization techniques of the polymeric insulators and their aging performance under the action of multiple factors are discussed. To enhance t... [more]

Pollution of water by plastic contaminants has received increasing attention, owing to its negative effects on ecosystems. Small plastic particles propagate in water and can travel long distances from the source of pollution. In order to research the settling motion of particles in water flow, a small-scale experiment was conducted, whereby spherical plastic particles of varying diameters were released in an open-channel flow. Three approaches were investigated to numerically simulate the motion of particles. The numerical simulation results were compared and validated with experimental data. The presented methods allow for deeper insight into particle motion in fluid flow and could be extended to a larger scale to predict the propagation of mesoplastics in natural environments.

This paper reports on a review on combined heat and power (CHP). A historical examination points out that combined heat and power was primarily used for hot heat valorizing (CHHP). The technological aspects evolved with this configuration first in industrial size. More recently, configuration with cold heat and power production (CCHP) appeared. Then, the immediate extension of this configuration led to trigeneration configuration, providing three useful effects: power and hot and cold heat. We suggest in the paper that progress regarding this last approach remains to be achieved towards the extension of trigeneration to polygeneration, whatever the form of energy and substance (water uses, for example). More generally, we consider that the goal, regarding the energy uses, is the integration of all needs in the design stage of the whole system (design optimization). Then, the evolution of the system in time should be considered, this being the purpose of control command of the optimized... [more]

This paper proposes a new peer-to-peer (P2P) energy trading method between energy sellers and consumers in a community based on multi-agent reinforcement learning (MARL). Each user of the community is treated as a smart agent who can choose the amount and the price of the electric energy to sell/buy. There are two aspects we need to examine: the profits for the individual user and the utility for the community. For a single user, we consider that they want to realise both a comfortable living environment to enhance happiness and satisfaction by adjusting usage loads and certain economic benefits by selling the surplus electric energy. Taking the whole community into account, we care about the balance between energy sellers and consumers so that the surplus electric energy can be locally absorbed and consumed within the community. To this end, MARL is applied to solve the problem, where the decision making of each user in the community not only focuses on their own interests but also ta... [more]