One of the trends in sustainable economic development is the transition to circular business models, which aim to optimize goods and material flows by taking into account their cyclical nature at all production stages. Adapting circular business models to mining and mineral processing operations can serve as an impetus for mining companies to upgrade and move to a new level of technological sophistication. This article attempts to develop a conceptual framework for circular business models factoring in the nature of production chains in coal mining, power generation, and metal production to reduce production costs, expand the product range, improve sustainable development indicators, and deliver growth in company value. This article is based on desk studies that were aimed at analyzing the efficiency of circular models, organizing data on experience in rational resource use in the mining industry, and transforming basic circular models into adapted ones for the environment in which coa... [more]

This study investigates the economic viability at the pre-feasibility level of a hybrid methanol and biomethane plant based on biogas coupled to a photovoltaic (PV) power plant and a proton exchange membrane (PEM) electrolyzer. The reference case settled in Uganda consisted of two units powered by a 200 kW PV plant and grid power: a 25 Nm3/h anaerobic digester and a 140 kW PEM electrolyzer-based methanol plant. Its production of 33.3 tons of methanol and 70.1 tons of biomethane per year can provide cooking fuel for 750 households. Response Surface Methodology was used to evaluate the impact of the three main factors on the simple payback period (PBP). The size of the PV plant had the most significant impact on PBP, followed by the cost of electricity, the interaction between these factors, and the PEM electrolyzer capital cost reduction, in this contribution order. These findings point to energy generation costs as the primary factor affecting the economic viability of these small-scal... [more]

The article presents the results of measurements of temperature, relative humidity and CO2 concentration in six single-family houses’ bedrooms located in Poland, in Wrocław and vicinity, during two climatic seasons: summer−autumn and winter. Two buildings with natural ventilation (NV) were tested, three with mechanical ventilation with heat recovery (MV) and one with hybrid ventilation (HV)—mixed mode natural and mechanical. The behavior of residents regarding opening windows was analyzed and the influence of the changing internal and external conditions on their active reactions was examined. The analysis confirms and adds to the global discourse on the key impact of user behavior on securing healthy indoor air quality in housing, regardless of ventilation system or building energy standard. A disconnect exists between the observed window opening practices and typical design principles, assuming adjustment to a given ventilation system or changing weather conditions. The observations... [more]

The international energy scenario to date is heavily based on fossil energy sources such as coal, oil or natural gas. According to the international ecological goals of the UNFCCC formalized in the legally binding treaty called the Paris Agreement, the next global challenges will be the decommissioning, dismantling or reconversion of the current fossil energy system into a new, more sustainable system that makes more efficient use of renewable energy technologies. Worldwide, there are about 6500 offshore oil and gas facilities and about 130 of them are located in the Mediterranean basin, mainly in the Adriatic and Ionian Seas: more than 110 offshore gas platforms have been installed in these areas since 1960. In this paper, using Life Cycle Assessment, the environmental and economic impacts of the total removal operations of an existing offshore platform in the context of the Adriatic Sea are assessed based on existing and registered decommissioning projects. In addition, the avoided i... [more]

The development of Smart Local Energy Systems (SLES) in the UK is part of the energy transition tackling the energy trilemma and contributing to achieving the Sustainable Development Goals (SDGs). Project developers and other stakeholders need to independently assess the performance of these systems: how well they meet their aims to successfully deliver multiple benefits and objectives. This article describes a step undertaken by the EnergyREV Research Consortium in developing a standardised Multi-Criteria Assessment (MCA) tool—specifically a discrete choice experiment (DCE) to determine the weighting of key performance indicators (KPIs). The MCA tool will use a technology-agnostic framework to assess SLES projects, track system performance and monitor benefit realisation. In order to understand the perceived relative importance of KPIs across different stakeholders, seven DCEs were conducted via online surveys (using 1000minds software). The main survey (with 234 responses) revealed t... [more]

Land available for energy production is limited in cities owing to high population density. To reach the net zero goal, cities contributing 70% of overall greenhouse gas emissions need to dramatically reduce emissions and increase self-sufficiency in energy production. Environmental infrastructures such as sewage treatment and incineration plants can be used as energy production facilities in cities. This study attempted to examine the effect of using environmental infrastructure such as energy production facilities to contribute toward the carbon neutrality goal through urban energy systems. In particular, since the facilities are suitable for hydrogen supply in cities, the analysis was conducted focusing on the possibility of hydrogen production. First, the current status of energy supply and demand, and additional energy production potential in sewage treatment and incineration plants in Seoul, were analyzed. Then, the role of these environmental infrastructures toward energy self-s... [more]

The world is moving towards a low-carbon economy through renewable energy sources. In this context, concentrating solar power (CSP) technologies can exploit the rich solar resource in Brazil, diversifying the national electricity mix. The aim of this paper is to support the insertion of CSP generation in the Brazilian bottom-up model MATRIZ by analyzing the environmental performance of three CSP technologies: (i) solar tower power (STP) with a thermal storage system (TSS) of 7.5 h; (ii) solar thermal parabolic trough (STPT) with a TSS of 6 h; and (iii) STPT without TSS. From a life cycle perspective, their freshwater consumption and greenhouse gas (GHG) emissions are addressed by employing the software SimaPro, the Ecoinvent database, and the ReCiPe 2016 method, as well as information from the system advisory model (SAM) and the literature. As a result, STP is the most environmentally sound CSP alternative, presenting lower GHG emissions and water consumption than the two STPT technolo... [more]

Production and consumption of confectionery products have increased worldwide, thus, effective management of wastewater produced is now an important issue. The confectionery high-load sewage was explored for biogas production in an innovative-design anaerobic reactor with labyrinth flow. The experimental studies were focused on determining the best technological parameters of anaerobic digestion for the effective removal of pollutants and obtaining high CH4 production efficiency. It was found that organic loading rate (OLR) of 5.0−6.0 g COD/L·d contributed to the highest CH4 generation of 94.7 ± 6.1 to 97.1 ± 5.1 L CH4/d, which corresponded to a high COD removal of 75.4 ± 1.5 to 75.0 ± 0.6%. Under such conditions the FOS/TAC ratio was below 0.4, indicating reactor stability, and pH was on the level of 7.15 ± 0.04 at OLR 5.0 g COD/L·d and 7.04 ± 0.07 at OLR 6.0 g COD/L·d.

The Sixth Assessment Report of Inter-Governmental Panel on Climate Change (IPCC) has highlighted the urgency of accelerated climate actions harnessing synergies and minimizing trade-offs with various SDG. This calls for a clear understanding of linkages between climate goals and other SDGs at national level for formulating synergistic policies and strategies and developing different sectoral programs and coherent cross-sectoral policies. This is even more important for least developed countries such as Nepal where these linkages are less understood and development challenges are multifaceted. In this context, this paper aims to evaluate potential synergies and trade-offs among selected SDGs and their associated targets in Nepal in a linear pairwise comparison. Synergies and trade-offs related to climate action (SDG 13), access to energy (SDG 7), sustainable consumption and production (SDG 12), and life on land (SDG 15) have been evaluated using historical data for the period from 1990... [more]

Hydrogen is a promising commodity, a renewable secondary energy source, and feedstock alike, to meet greenhouse gas emissions targets and promote economic decarbonization. A common goal pursued by many countries, the hydrogen economy receives a blending of public and private capital. After European Green Deal, state members created national policies focused on green hydrogen. This paper presents a study of energy transition considering green hydrogen production to identify Portugal’s current state and prospects. The analysis uses energy generation data, hydrogen production aspects, CO2 emissions indicators and based costs. A comprehensive simulation estimates the total production of green hydrogen related to the ratio of renewable generation in two different scenarios. Then a comparison between EGP goals and Portugal’s transport and energy generation prospects is made. Portugal has an essential renewable energy matrix that supports green hydrogen production and allows for meeting Europ... [more]

The tanning industry generates significant amounts of solid waste and post-production wastewater, which should be managed in accordance with the principles of the circular economy. Waste is generated at various technological stages of production. This comprises mainly solid waste and leachate. A comprehensive solution to the problem of disposal of this waste is very important from economic and environmental points of view. This work presents research for a technological production line designed for the comprehensive processing of post-production residues. In the present paper, the authors present an analysis related to the possibility of processing leather flesh side (mizdra) as a substrate for methane fermentation. The study showed an increased biogas production from solid waste after enzymatic hydrolysis up to 248 Nm3/Mg. Preliminary research on the system designed for pre-treatment of sewage from the technological line is also presented. The study showed a COD reduction of more than... [more]

Operating and research experiments indicate that the potential benefits of thermal treatment of sewage sludge before methane fermentation include increasing the biodegradability of substrates, reducing the amount and improving the dewaterability of the fermentate and its hygienization, reducing the emission of odours during stabilization, higher production of biogas, and improving the energy balance of the process. The process of disintegration (liquefaction) can be carried out, for example, through the use of mechanical homogenization, microwaves and ultrasonic waves, chemical agents, thermal methods, and biological processes. The article reviews the literature data on thermal hydrolysis research, from the first source information to the present. The thermal hydrolysis achieved enhanced hydrolysis, biogas potential, and faster sludge degradation during anaerobic digestion without compromising the quality of the end products.

The anaerobic digestion, AD, process presents a solution for sustainable waste management, greenhouse gas mitigation and energy production for growing population needs and requirements. Adopting a biorefinery approach that utilises different feedstock may enhance energy production and support optimisation of the anaerobic digestion process. Algae is a promising feedstock that could be used for energy production via the anaerobic digestion process. Microalgal biomass is rich in carbohydrates and lipids; however, many species of algae exhibit tough cell walls that could also be difficult to digest and may influence or inhibit the efficiency of the AD process. This study concentrated on the comparison of AD remediation of two marine algal biomass species, Tetraselmis suecica and Nannochloropsis oceanica. The two species were pre-treated with an ultrasound technique and compared for their methane production using biochemical methane potential tests. For Tetraselmis, a specific methane prod... [more]

This paper offers an algorithm to account for potential actions on the efficient production of renewable energy. The algorithm consists of a substantiated choice of a certain type of renewable energy, the evaluation of its potential, and the regulation of the processes of obtaining that renewable energy. Also, potential resources for agricultural biofuel production have been analyzed and it has been determined that there is real biomass potential in Lithuania. It will thus be beneficial to make appropriate managerial decisions on the methods of biofuel processing and consumption, as well as on means of receiving the economic, energy and environmental effects. The total potential of by-product biomass of crop production was determined, and the thermal and electric potential of the crop by-products were calculated. Additionally, the potential for production of gas-like types of fuel (biomethane, biohydrogen, and syngas) from crop by-products was determined. The potential for the producti... [more]

This paper is devoted to the development of hydrogen-containing, environmentally safe, fire-resistant, and corrosion-protected lubricant cooling liquids (LCLs) from vegetable oils with improved sanitary and hygienic parameters for the machining of parts and equipment made from high-strength steels for application during the interoperation period in turbine halls. The use of plant raw materials as ecologically and fire-safe LCLs increased the efficiency of LCLs when evaluating drilling steel in terms of the dependence of the stability of the cutting tool on the drilling speed. Chips formed from LCLs during turning had a compact, cylindrical appearance, and the addition of both water and coolant during turning significantly changed the morphology of the cutting particles. Using water and LCL intensified the physical and chemical destruction processes. After the use of water and LCL, the concentration of hydrogen in the cutting products of 38KHN3MFA steel increased, which indicated its pa... [more]

Wastewater generation is a worldwide problem, and its treatment is an important practice for maintaining public health and environmental protection. Oxygenic photogranules (OPGs) are a relatively novel type of biogranules that have the potential to substitute the conventional activated sludge (AS) process due to the production of in situ oxygen, better physical properties such as settling velocity and density, as well as carbon and nutrient removal efficiencies. The formation of the granules is attributed to many factors, among which the most influential are light intensity, ammonium nitrogen concentration, and the presence of filamentous cyanobacteria that, along with heterotrophic microorganisms situated in the granule’s core, create a self-sustainable system that combines denitrification, carbon removal, and oxygen production. Hydrostatic and hydrodynamic cultivations are two ways that allow for obtaining OPGs. These two cultivation methods lead to the formation of various types of... [more]

Coal-fired power plants have been identified as one of the major sources of air pollutants in the power sector. Most coal-fired power stations have large open-air coal stockpiles, which lead to a considerable amount of fugitive dust. The construction of an indoor coal storage is known to control coal dust; however, it requires significant upfront capital. Certain power utilities, including those in South Korea, are currently considering or are required to build indoor coal storages. This study analyzed the benefit and economic feasibility of indoor coal storages in coal-fired power stations. A contingent valuation method was used to elicit people’s willingness to pay for the construction of new indoor coal storages. The results showed that, on average, a South Korean household was willing to pay KRW 59,242 (USD 53.97) in a lump-sum payment toward the construction of indoor coal storages at six coal-fired power stations (total storage capacity of 5.47 million tons of coal, with a site a... [more]

Interest in biomass has increased due to current environmental issues, and biomass analysis is usually performed using element and proximate analyses to ascertain its fuel characteristics. Mainly, element component prediction models have been developed based on proximate analysis, yet few studies have predicted proximate components based on element analysis. Hence, this study developed a proximate component prediction model following the calorific value calculation. Analysis of Pearson’s correlation coefficient showed that volatile matter (VM) and fixed carbon (FC) were positively correlated with hydrogen and oxygen, and with carbon, respectively. Thus, the model correlation was developed using a combination of the “stepwise” and “enter” methods along with linear or nonlinear regressions. The optimal models were developed for VM and ash content (Ash). The VM optimal model values were: R2 = 0.9402, root-mean-square error (RMSE) = 7.0063, average absolute error (AAE) = 14.8170%, and aver... [more]

The Italian National Recovery and Resilience Plan (NRRP) includes, among other measures, investments in hydrogen vehicle refuelling stations, intending to promote the use of fuel cell electric vehicles (FCEVs) for long-haul freight transport. This paper evaluates the impact that this action could have on CO2 emissions and fuel consumption, focusing on a case study of the Campania region. The proposed approach, which can also be transferred to other geographical contexts, requires the implementation of a freight road transport simulation model; this model is based on the construction of a supply model, the estimation of road freight demand, and an assignment procedure for computing traffic flows. This study covers the period from 2025 to 2040, according to the forecasts of the NRRP and some assumptions on the action effects; moreover, it is assumed that hydrogen is entirely produced from renewable sources (green hydrogen). The key findings from three different scenarios show that saving... [more]

The sources and sinks of dissolved CH4 in offshore waters are becoming diversified with the rapid increase in human activities. The concentration and air−sea exchange flux of dissolved CH4 present new characteristics of more intense spatiotemporal evolution, and the contribution to atmospheric CH4 continues to increase. Herein, a new model based on navigable air−sea exchange flux observations was proposed, which replaced the traditional station-based sampling analysis and testing method, realizing the synchronous measurement of methane in the atmosphere and surface seawater carried by ships. Based on the Marine Geological Survey project of the China Geological Survey, comprehensive environmental surveys were conducted in April 2018, September 2018, and June 2019 in the Qiongdongnan area in the northern part of the South China Sea, and the dissolved methane content in the sea surface atmosphere and surface seawaters in 2019 were simultaneously obtained. The methane exchange flux ranges... [more]

The limited use of non-renewable energy sources facilitates a reduction in the negative environmental impact of electricity production. The policies of European countries aim to change the structure of electricity sources, focusing particularly on non-renewable sources. The aim of this study was to assess changes in the structure of electricity generation depending on the energy sources used in 34 European countries in the years 1990−2020 in terms of their environmental impact. This study was conducted using cluster analysis: a method applied in multivariate comparative analyses. Such an approach provided a new, broader outlook on changes in the structure of electric energy production in Europe. A total of nine homogeneous groups of countries were distinguished in terms of energy transformation. The ecological scarcity method 2013 was applied to assess the environmental impact of electricity production in the analyzed countries. In the investigated period, the negative environmental im... [more]

Algae are a diverse group of aquatic organisms and have a potential to produce renewable biofuel via hydrothermal liquefaction (HTL). This study investigated the effects of reaction environments on biocrude production from “Tetraselmis sp.” algae strain by HTL process using red mud (RM) based catalyst. The inert (N2), ethylene (C2H4), reducing (10% H2/90% N2), and oxidizing (10% O2/90% N2) environments were applied to the non-catalytic as well as catalytic HTL treatments with two forms of RM catalysts: RM reduced at 500 °C (RRM) and nickel-supported RM (Ni/RM). Under nitrogen, ethylene and reducing environments, the biocrude yield increased by the following trend: No Catalyst < RRM < Ni/RM. The Ni/RM catalyst produced the highest biocrude yield (37 wt.%) in an ethylene environment, generated the lowest total acid number (14 mg KOH/g) under inert atmosphere, and lowered sulfur (33−66%) and oxygen (18−30%) from biocrude products irrespective of environments. The RRM catalyst maximi... [more]

The growing environmental problems associated with the dumping of large amounts of textile waste and the demand for circular products are prompting textile waste recycling enterprises to develop circular business models (CBMs). This implies a radical change in the way some enterprises operate to obtain growth. Considering the importance of the drivers of and barriers for the adoption and implementation of CBMs in the textile recycling sector, it is claimed that the comprehension of these factors to CBMs is limited and deserves more attention in empirical research. Therefore, our research investigates the antecedents of circular business models in the textile recycling sector by highlighting influencing factors. The aim of the article is to explore the main enhancing and inhibiting factors in the development of circular business models on the example of a large enterprise operating for 30 years in the textile recycling sector. In this study, a case study design of mixed methods, includi... [more]

The development and implementation of public policies towards renewable energies are crucial in order to address the contemporary challenges faced by humanity. The 3Rs (reduce, reuse, and recycle), as a circular economic practice, are often cited as one of the best solutions for sustainable development. Therefore, this study analyzed public policies for renewable energy from the perspective of the circular economy. Accordingly, a systematic review of the literature was carried out with respect to the beneficiaries and convergences of circularities, with a focus on public policies for renewable energies. The sample had public policies classified into three types (distributive, redistributive, and regulatory policies). The results showed that the first studies began in 1999, with a significant increase in publications during the 2010s, in which Germany was the country with the greatest contribution. The analyses associated with space showed the countries committed to the use of renewable... [more]

The disruption of fossil fuel supply chains due to the war in Ukraine has resulted in the need for an urgent reorganisation of the energy supply system, the cost of which has created a substantial increase in electricity prices in many markets. In light of the above, the need for the development of a renewable energy market has become stronger than ever; hence, the authors of this study have oriented their efforts towards investigating the development of the renewable energy market in countries bordering the line of armed conflict in Ukraine, i.e., Poland—strongly dependent on traditional forms of energy production—and Lithuania. The primary objective of the paper is to review the literature on wind energy, which is necessary to establish the current role of this energy dimension in the renewable energy market in the energy systems of Poland and Lithuania. Therefore, this review paper is oriented towards a review and evaluation of the available thematic literature and industry studies,... [more]