Energy issues are multifaceted and are not limited to power plants, biogas plants or transmission lines. They also include the production, usage and utilisation of batteries and accumulators, which are increasingly valuable due to, among other things, the decision to develop the production of electric cars. This article creates new ground by analysing the European Union management system of batteries and accumulators in the cause−effect context. This paper’s insights have emerged iteratively based on the theory reviewed and the empirical case—a deep analysis of the Polish management system of batteries and accumulators. The findings show that the public institutions in the analysed European Union Member State—Poland—were not ready to create a fully coherent and effective oversight system on managing batteries and accumulators. It may limit the reliability of the European Union’s reporting on battery and accumulator management, which is a part of the European energy policy. The findings... [more]

The Office of the National Broadcasting and Telecommunications Commission has reported that, from 2014 to 2018, Thailand’s internet usage has grown six-fold to 3.3 million terabytes per annum. This market trend highlights one of the policies of Thailand 4.0, with the aim of making Thailand a hub for information transfer in ASEAN. As a result, there will be a massive demand growth for data storage facilities in the near future. Data centres are regarded as the brain and heart of the digital industry and are essential for facilitating businesses in organising, processing, storing and disseminating large amounts of data. As the energy demand for equipment cooling contributes to over 37% of the total energy consumption, the data centres of the world’s leading companies, such as Amazon, Google, Microsoft and Facebook, are generally located in cold climate zones, such as Iceland, in order to reduce operating costs for cooling. Due to this reason, the possibility of data centres in Thailand i... [more]

The influence of cavitation in common-rail diesel nozzles on the soot formation process has been analysed experimentally. The soot formation process was characterized by measuring soot emissions in a single-cylinder engine, which was mounted on a test bench equipped with an opacimeter. In order to do this, operating conditions where the soot oxidation process was equivalent were chosen, whereby differences in the soot formation process were possible to be analysed. The results achieved confirm that cavitation provokes a soot formation process reduction. This reduction can be attributed by combining results of three effects: a reduction of the effective diameter, an increase in effective injection velocity, and an increase in turbulence level inside the nozzle orifice leading to a longer lift-off length. The three effects lead to a decrease in relative fuel/air ratio at the lift-off, therefore explaining the soot formation reduction.

Recent developments in micro-grids have led to increased interest in DC distribution due to its high efficiency in distributing energy from renewable energy sources to DC loads. This paper seeks to analyse the performance of AC and DC systems in a relatively large-sized 6 kW PV installation to determine the level of improvement in efficiency provided by DC distribution and to identify methods for further improvement. Baseline annual data for the AC system were collected from a live installation on a national school in Inis Oirr, an island off the west coast of Ireland. The results indicate that usage of a DC distribution system has the potential to reduce system losses by up to 50% as well as the ability for an annual saving in grid energy of 5% compared to the existing AC system. Moreover, the analysis reveals that DC outperforms AC distribution more in spring and autumn, when power consumption is comparable to the system production, but there is less impact in summer, when PV product... [more]

The mitigation of climate change through ambitious greenhouse gases emission reduction targets constitutes a current priority at world level, reflected in international, regional and national agendas. Within the common framework for global climate action, an increased reliance on renewable energy sources, which would assist countries to reduce energy imports and cut fossil fuel use, emerged as the solution towards achieving worldwide energy security and sustainability through carbon-neutrality. As such, this study is aimed to investigate the heterogeneous effects of relevant economic and environmental driving factors for renewable energy consumption (REC) that emerge from current policy objectives (GDP per capita, carbon intensity, and research and development) through an empirical analysis of a wide panel of 94 countries, and five income-based subpanels, over the 1995−2019 period, by using heterogeneous panel data fixed-effects estimation techniques (static and dynamic) with robust Dr... [more]

Offshore Direct Current (DC) collector grids are a promising technology for decreasing the installation and operation costs of offshore wind parks. Nevertheless, the stability properties and hence the design of such DC collector grids is not common or standardised. Hence, this paper describes an attempt to fill these gaps by analysing the stability of two different types of DC collector grids—star and string—by considering identical operating conditions. The approach follows a non-parametric formulation of the impedance based Nyquist Stability Criterion. The hyperbolic Π equivalent formulation of the telegraph equation is adopted for modelling the submarine cable due to high capacitance that is distributed and thus the conventional 50 Hz Π-model is not sufficient anymore. Furthermore, the paper shows how to integrate the complex dynamics of wind turbines into the overall stability assessment through an impedance building algorithm. Finally, it is shown how to stabilise the collector gr... [more]

CoME EASY is a European Union H2020 project started in May 2018, which aims to help local public authorities secure a more sustainable energy and climate policy, in line with the New Green Deal and Fit for 55 initiatives. The main idea of CoME EASY is to offer an integrated package of on-line tools that synchronize European Energy Awards (EEA) with Covenant of Mayors (CoM), ISOs, Smart Cities, and other initiatives that allow local communities to have multiple commitments for energy efficiency and climate with less effort. EEA is a quality management and awarding system for municipalities and regions, which started in 1988 in Switzerland and now includes more than 1700 municipalities from 8 countries and 10 new pilot countries with more than 65 million people belonging to the local communities that are involved. There are six main areas of activity in EEA (Development and Spatial Planning Strategy, Municipal Buildings and Facilities, Supply and Disposal, Mobility, Internal Organization... [more]

Hybrid electric ships powered by diesel generators and batteries are the main configuration for shipboard microgrids (SMGs) in the current maritime industry. Extensive studies have been conducted for the hybrid operation mode, whereas the all-electric operation mode and the switching between the aforementioned two modes in a system with multiple generators and batteries have not been tested. In this paper, a coordinated approach for a hybrid electric ship is proposed, where two operation modes have been simultaneously considered. More specifically, for achieving an efficient operation with reduced generator wear losses, the governor-less diesel-engine-driven generators have been adopted in the study. According to the practical operation conditions, two operation modes, the all-electric and hybrid modes, are preset. Based on these, the coordination of the generators acting as the main power sources and batteries regulating the power flow and improving the generator efficiency is studied... [more]

Transparent, objective, and repeatable resource assessments should be the goal of companies, investors, and regulators. Different types of resources, however, may require different approaches for their quantification. In particular, coal can be treated both as a solid resource (and thus be mined) as well as a reservoir for gas (which is extracted). In coal mining, investment decisions are made based on a high level of data and establishment of seam continuity and character. The Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (the JORC Code) allows deposits to be characterised based on the level of geological and commercial certainty. Similarly, the guidelines of the Petroleum Resource Management System (PRMS) can be applied to coal seam gas (CSG) deposits to define the uncertainty and chance of commercialisation. Although coal and CSG represent two very different states of resources (i.e., solid vs. gaseous), their categorisation in the JORC C... [more]

The small fault with a vertical displacement (or drop) of 2−5 m has now become an important factor affecting the production efficiency and safety of coal mines. When the 3D seismic data contain noise, it is easy to cause large errors in the prediction results of small faults. This paper proposes an intelligent small fault identification method combining variable mode decomposition (VMD) and a support vector machine (SVM). A fault forward model is established to analyze the response characteristics of different seismic attributes under the condition of random noise. The results show that VMD can effectively realize the attenuation of random noise and the seismic attributes extracted on this basis have a good correlation with the small fault. Through the analysis of the SVM algorithm and the fault forward model, it is proved that it is feasible to realize intelligent predictions of small faults by using seismic attributes as the input of a SVM. The fault prediction method using a SVM tha... [more]

A numerical model was built using FEFLOW® to simulate groundwater flow and heat transport in a confined aquifer in Brussels where two Aquifer Thermal Energy Storage (ATES) systems were installed. These systems are operating in adjacent buildings and exploit the same aquifer made up of mixed sandy and silty sublayers. The model was calibrated for groundwater flow and partially for heat transport. Several scenarios were considered to determine if the two ATES systems were interfering. The results showed that a significant imbalance between the injection of warm and cold water in the first installed ATES system led to the occurrence of a heat plume spreading more and more over the years. This plume eventually reached the cold wells of the same installation. The temperature, therefore, increased in warm and cold wells and the efficiency of the building’s cooling system decreased. When the second ATES system began to be operational, the simulated results showed that, even if the heat plumes... [more]

The present article deals with the concept of the non-metallic flat plate liquid solar collector and its evaluation. The innovative concept lies in the elimination of metal parts of the solar collector and their replacement by the foam glass block, which significantly reduces the energy and material demands of the production process. The evaluation of the collector took place in two phases, the first was focused on the numerical evaluation, which resulted in the compilation of a theoretical curve of the efficiency of the solar collector. The second phase was focused on verifying the basic functionality of the concept based on the results obtained from experimental tests of the collector, which confirmed the functionality of the concept and revealed several areas that will need to be addressed in the further development of the prototype.

Battery aging leads to reduction in a battery’s cycle life, which restricts the development of energy storage technology. At present, the state of health (SOH) assessment technology, which is used to indicate the battery cycle life, has been widely studied. This paper tries to find a way to adjust the battery management system adaptively in order to prolong the battery cycle life with the change of SOH. In this paper, an improved Galvanostatic Intermittent Titration Technique (GITT) method is proposed to decouple the terminal voltage into overpotential (induced by total internal resistance) and stoichiometric drift (caused by battery aging, indicated by OCV). Based on improved GITT, the open circuit voltage-temperature change (OCV-dT/dV) characteristics of SOH are described more accurately. With such an accurate description of SOH change, the adaptive method to change the discharge and charge cut-off voltage is obtained, whose application can prolong battery cycle life. Experiments ver... [more]

Lithium-ion batteries (LIBs) are increasingly employed in electric vehicles (EVs) owing to their advantages, such as low weight, and high energy and power densities. However, the uncertainty encountered in the manufacturing of LIB cells increases the failure rate and causes cell-to-cell variations, thereby degrading the battery capacity and lifetime. In this study, the reliability and robustness of LIB cells were improved using the design of experiments (DOE), and the reliability-based robust design optimization (RBRDO) approaches. First, design factors sensitive to the energy density and power density were selected as design variables through sensitivity analysis using the DOE. RBRDO was performed to maximize the energy density while reducing the failure rate and cell-to-cell variations. To verify the superiority of the reliability and robustness offered by RBRDO, the obtained results were compared with those from conventional deterministic design optimization (DDO), and reliability-b... [more]

The microporous layer (MPL) constitutes a critical component of the gas diffusion layer within the membrane electrode assembly (MEA) of a proton exchange membrane fuel cell (PEM FC). The MPL plays a fundamental role in various processes during FC operation: control of membrane humidification, heat distribution throughout the MEA, excess water removal from the cathode, and transportation of fuel to the reaction sites. Previously, we investigated the performance of a fuel cell unit employing an MPL based on laser-induced graphene (LIG) produced by the laser pyrolysis of polymeric (polyimide) substrates. The prototype LIG-based unit was tested over the typical range of relative humidity and temperature conditions. The polarization curves observed in that study displayed broad ohmic loss regions and high stability along the concentration loss regions, an interesting electrical behavior that justified developing the present voltage-current density study for the same FC prototype compared to... [more]

Frequent fluctuations of CNG engine operating conditions make the waste heat source have uncertain, nonlinear, and strong coupling characteristics. These characteristics are not conducive to the efficient recovery of the DORC system. The systematic evaluation of the CNG engine waste heat source and the comprehensive performance of the DORC system is conducive to the efficient use of waste heat. Based on the theory of internal combustion (IC) engine thermal balance, this paper analyzes the dynamic characteristics of compressed natural gas (CNG) engine waste heat energy under full operating conditions. Then, based on the operating characteristics of the dual loop organic Rankine cycle (DORC) system, thermodynamic models, heat transfer models, and economic models are constructed. The dynamic response characteristics analysis and energy, exergy, and economic (3E) evaluation of the DORC system under full operating conditions are carried out. The results show that the maximum values of net p... [more]

The use of sea wind energy is restricted by the limited availability of suitable sites in shallow waters. To overcome this challenge, wind turbines located on offshore semi-submersible platforms appear as a valuable option, as they also allow the exploitation of other resources like wave energy or aquaculture. Nevertheless, the literature addressing this kind of design is scarce, and the interactions of the wind turbine and the platform movements increase the complexity of the control system with respect to the wind turbines with fixed foundations. Within this context, fuzzy control is a promising alternative to deal with these issues. However, while fuzzy controllers can be an alternative to substitute conventional PI control, the latter is a well-known, robust choice for operators. In this sense, fuzzy controllers can be designed to work in collaboration with PI controllers to ease their adoption. To this end, this paper addresses those gaps in the literature by presenting a methodol... [more]

Wind turbines are typically organised as a fleet in a wind park, subject to similar, but varying, environmental conditions. This makes it possible to assess and benchmark a turbine’s output performance by comparing it to the other assets in the fleet. However, such a comparison cannot be performed straightforwardly on time series production data since the performance of a wind turbine is affected by a diverse set of factors (e.g., weather conditions). All these factors also produce a continuous stream of data, which, if discretised in an appropriate fashion, might allow us to uncover relevant insights into the turbine’s operations and behaviour. In this paper, we exploit the outcome of two inherently different discretisation approaches by statistical and visual analytics. As the first discretisation method, a complex layered integration approach is used. The DNA-like outcome allows us to apply advanced visual analytics, facilitating insightful operating mode monitoring. The second disc... [more]

The design and development of wind turbines in low-wind-speed areas involves several technical and financial challenges related to maximizing conversion efficiency and minimizing cost. Unfortunately, much of the African continent is dominated by low-wind-speed resources. In this study, a multi-parameter optimization method is used to explore the design of a novel Ferris wheel wind turbine (FWT) technology, which has an 800-kW generation capability. We used the tip speed ratio, lift-to-drag ratio and power coefficient to determine the optimal efficiency by varying the number of blades and rim diameters. The capital cost estimates, as affected by rim diameter and the number of blades, are presented. This paper studies FWTs at their rated wind speeds because wind turbines have their maximum performance at the rated wind speeds, and this allows one to observe the effects of changing the rim diameter and the number of blades without the need to consider the location of the turbine. The resu... [more]

The use of photovoltaic (PV) systems as the energy source of electrical distributed generators (DG) is gaining popularity, due to the progress of power electronics devices and technologies. Large-scale solar PV power plants are becoming the preferable solution to meet the fast growth of electrical energy demand, as they can be installed in less than one year, as compared to around four years in the case of conventional power plants. Modular multilevel inverters (MMIs) are the best solution to connect these large-scale PV plants to the medium-voltage (MV) grid, due to their numerous merits, such as providing better power quality, having higher efficiency, providing better reliability, and their scalability. However, MMIs are still progressing and need some improvement before they can be implemented safely in the industrial, medium, and high voltage networks. The main purpose of this paper is to review the present MMIs topologies when used in PV applications. The review aims to present a... [more]

One of the most important milestones in the history of hydropower is the invention of the Kaplan turbine. It is a machine stemming from the Francis turbine, which Viktor Kaplan was originally trying to improve. However, it gradually developed into the creation of a completely new solution of an impeller with an axial flow rate and adjustable blades. The first patent relating to the new invention dates from 1913. Shortly afterwards, the Kaplan turbine became the most widely used type of device for the use of low heads and variable flow rates. That meant a significant expansion of the potential of economically usable hydropower. The article briefly introduces the history of turbine development. The overall picture is then completed by a few less-known historical documents.

The demand for fossil fuels is increasing because of globalization and rising energy demands. As a result, many nations are exploring alternative energy sources, and hydrogen is an efficient and practical alternative fuel. In the transportation industry, the development of hydrogen-powered cars aims to maximize fuel efficiency and significantly reduce exhaust gas emission and concentration. The impact of using hydrogen as a supplementary fuel for spark ignition (SI) and compression ignition (CI) engines on engine performance and gas emissions was investigated in this study. By adding hydrogen as a fuel in internal combustion engines, the torque, power, and brake thermal efficiency of the engines decrease, while their brake-specific fuel consumption increase. This study suggests that using hydrogen will reduce the emissions of CO, UHC, CO2, and soot; however, NOx emission is expected to increase. Due to the reduction of environmental pollutants for most engines and the related environme... [more]

Microwave-assisted spark ignition (MAI) is a promising way to enhance the ignition performance of engines under lean conditions. To understand the effect of microwave-induced flow during MAI, the development and morphology of spark-ignited methane-air flame kernel under various microwave pulse parameters are experimentally studied. Experiments are conducted in a constant volume combustion chamber, and flame development is recorded through a high-speed shadowgraph method. Flame area and deformation index are adopted to evaluate the flame characteristic. Results show that increasing the microwave pulse energy from 0 to 150 mJ exhibits a threshold process for expanding the flame kernel area under 0.2 MPa ambient pressure. When the pulse energy is below the threshold of 90 mJ, the microwave enhancing efficiency is much lower than that beyond the threshold. Increasing microwave pulse repetition frequency (PRF) changes the flow on flame surface and raises the absorption efficiency for microw... [more]

The need for hot water in residential buildings requires a significant energy potential. Therefore, an efficient water heating system is important to achieve the goal of saving high-grade energy. The most simple and cheapest solar water heater is a flat plate solar collector (FPSC), which can increase the thermal energy of fluid by absorbing solar radiation. The performance of FPSC is comparatively low due to the dilute nature of solar insolation. Therefore, advancement of FPSC is being undertaken to improve the performance and achieve size reduction. In past, several techniques have been exploited to improve the performance of FPSC, which are presented in the present paper. These techniques include surface modifications, use of nanofluids, solar selective coating, and applications of a mini/macro channel, heat pipe, and vacuum around absorber. Surface modification on the absorber/absorber tube techniques are exploited to transfer the maximum possible solar energy to working fluids by... [more]

The ambient temperature has a great influence on the discharge and charging performance of a lithium battery, which may cause thermal runaway of the battery pack in extreme cases. In terms of the poor cooling effect caused by only using the cooling bottom plate for liquid cooling and the fact that the battery pack needs to be preheated before it can be used normally, a new cooling structure design was carried out, and a variety of cooling schemes and preheating schemes were proposed for analysis and comparison. The Star ccm+ simulation software was used to analyze and study their liquid cooling performance and preheating performance under different conditions. The best cooling scheme and preheating scheme were obtained by comparing the results of the simulation analysis. The simulation results show that the cooling performance of the cooling scheme using two vertical cooling plates and one cooling bottom plate is the best, and the preheating performance is best when the preheating liqu... [more]