The phase-out of nuclear energy in Germany will take place in 2022. A site for final disposal of high-level radioactive waste (HLRW) has not yet been chosen, but a site selection process was restarted by the Site Selection Act in 2017. This Act was based on a recommendation by a commission which also advised to follow up the development of deep borehole disposal (DBD) as a possible option for final disposal of HLRW. This paper describes briefly the status of DBD in Germany and if this option is to be pursued in Germany. Although DBD has some merits, it can only be a real option if supported by research and development. The technical equipment for larger boreholes of the required size will only be developed if there is funding and a feasibility test. Furthermore, any DBD concept must be detailed further, and some requirements of the Act must be reconsidered. Therefore, the support of DBD will likely remain at a low level if there are no political changes.

I would like to take the occasion of writing this newsletter to draw a sort of summary of our publishing activities at Energies and of the results and perspectives [...]

This paper presents a theoretical model to describe the progression of leading (falling) lightnings in storms (stepped leaders). Stepped leaders move down from the thundercloud base to the encounter point with an upward streamer. First, the existing models, related to the advance of leading lightnings, are analyzed. Then, a novel theory is presented. The proposed model describes both the leader progression and speed. It aims at explaining the leader progression as a succession of several steps, or branches, that form the well-known tree-like shape. The speed of advance per step is described as a function of various parameters: the charge concentration surface diameter and the step length, among others. The derived formulas include two new parameter named ( χ ) and G. χ is the ratio between the guide beam length ( L ) and the diameter of the circle, inside the cloud, where the charges are concentrated ( D ) . G relates density of charges, as explained herein... [more]

Composite indicators are becoming more relevant for evaluating the performance of water companies from a holistic perspective. Some of them are related with economic aspects, and others focus on social and environmental features. Consequently, a multidimensional evaluation is necessary for handling the great amount of information provided by multiple single indicators of a different nature. This paper presents a two-phase approach to evaluate the sustainability of water companies. First, a partial composite indicator for each dimension (social, environmental, economic) is obtained using multi-criteria decision making (MCDM). Then, a global indicator is obtained, in terms of the values reached in the previous stage for every partial indicator, by means an optimization problem rooted in data envelopment analysis (DEA). Our proposal offers the possibility of analyzing the performance of each water company under each dimension that characterizes the concept of sustainability, as well as a... [more]

To improve the robustness of grid-connected inverter against grid impedance in a weak grid an integrated design method of LCL-filter parameters and controller parameters is proposed. In the method the inherent relation of LCL-filter parameters and controller parameters is taken into consideration to realize their optimized match. A parameter normalization scheme is also developed to facilitate the system stability and robustness analysis. Based on the method all normalization parameters can be designed succinctly according to the required stability and robustness. Additionally, the LCL parameter and controller parameter can be achieved immediately by restoring normalization parameters. The proposed design method can guarantee the inverter stability and robustness simultaneously without needing any compensation network, additional hardware, or the complicated iterative computations which cannot be avoided for the conventional inverter design method. Simulation and experiment results hav... [more]

This paper presents a numerical investigation of thermal response of mortar panels, incorporating macro-encapsulated paraffin in different forms. Two types of macro capsules were fabricated and tested in this study using an instrumented hot plate device. The experimental results show that macro encapsulated paraffin reduced the temperature and increased time lag in the mortar panels due to the latent heat capacity of paraffin. Finite element models adopting the effective heat capacity method to model phase change effects were able to capture the overall thermal response of panels incorporated with paraffin well. Then, a parametric study was conducted using the validated finite element (FE) modelling technique to investigate the effects of different forms of macro capsules, the quantity of paraffin and the position of macro capsules. It was found that the tube and sphere macro capsules showed similar thermal responses, while the plate shaped capsules may cause a non-uniform temperature... [more]

Hywind-Scotland is a wind farm in Scotland that for many reasons is at the leading edge of technology and is located at a paradigmatic study area for offshore wind energy assessment. The objective of this paper is to compute the Capacity Factor ( C F ) changes and instantaneous power generation changes due to seasonal and hourly fluctuations in air density. For that reason, the novel ERA5 reanalysis is used as a source of temperature, pressure, and wind speed data. Seasonal results for winter show that C F values increase by 3% due to low temperatures and denser air, with economical profit consequences of tens of thousands (US$). Hourly results show variations of 7% in air density and of 26% in power generation via FAST simulations, emphasizing the need to include air density in short-term wind energy studying.

Microalgae are a potential means of recycling CO2 from industrial point sources. With this in mind, a novel photobioreactor (PBR) was designed and deployed at a coal-fired power plant. To ascertain the feasibility of using waste heat from the power plant to heat algae cultures during cold periods, two heat transfer models were constructed to quantify PBR cooling times. The first, which was based on tabulated data, material properties and the physical orientation of the PBR tubes, yielded a range of heat transfer coefficients of 19−64 W m−2 K−1 for the PBR at wind speeds of 1−10 m s−1. The second model was based on data collected from the PBR and gave an overall heat transfer coefficient of 24.8 W m−2 K−1. Energy penalties associated with waste heat utilization were found to incur an 18%−103% increase in energy consumption, resulting in a 22%−70% reduction in CO2 capture for the scenarios considered. A techno-economic analysis showed that the cost of heat integration equipment increased... [more]

Single room ventilation units with heat recovery is one of the ventilation solutions that have been used in renovated residential buildings in Estonia. In multi-story buildings, especially in a cold climate, the performance of units is affected by the stack effect and wind-induced pressure differences between the indoor and the outdoor air. Renovation of the building envelope improves air tightness and the impact of the pressure conditions is amplified. The aim of this study was to predict the air pressure conditions in typical renovated multi-story apartment buildings and to analyze the performance of room-based ventilation units. The field measurements of air pressure differences in a renovated 5-story apartment building during the winter season were conducted and the results were used to simulate whole-year pressure conditions with IDA-ICE software. Performance of two types of single room ventilation units were measured in the laboratory and their suitability as ventilation renovati... [more]

This study investigates the preferences of Italian home-owners when choosing a new domestic heating system. The focus is on understanding the influence on consumer choice of a potential label certifying the effect of the heating system on the greenhouse effect. To this end, we designed a survey including a discrete choice experiment and administered it to residents in north-eastern Italy. Our findings reveal that, on average, respondents pay particular attention to the green effect of their purchase. The carbon dioxide reduction label was considered second in terms of importance after cost. Further analysis found that our sample presents three clusters of customers, with intra-cluster homogeneous preferences. The cluster analysis showed that while the initial system costs are considered to varying degrees by the whole sample, the carbon dioxide reduction label was considered important by 79% of respondents (members of clusters 1 and 2). To achieve greater results in reducing the greenh... [more]

Building Energy and Comfort Management (BECM) systems have the potential to considerably reduce costs related to energy consumption and improve the efficiency of resource exploitation, by implementing strategies for resource management and control and policies for Demand-Side Management (DSM). One of the main requirements for such systems is to be able to adapt their management decisions to the users’ specific habits and preferences, even when they change over time. This feature is fundamental to prevent users’ disaffection and the gradual abandonment of the system. In this paper, a sensor-based system for analysis of user habits and early detection and prediction of user activities is presented. To improve the resulting accuracy, the system incorporates statistics related to other relevant external conditions that have been observed to be correlated (e.g., time of the day). Performance evaluation on a real use case proves that the proposed system enables early recognition of activitie... [more]

Underwater deployed sensors nodes are energy-constrained. Therefore, energy efficiency becomes crucial in underwater wireless sensor networks (U-WSNs). The adverse channel corrupts the packets and challenges their reliability. To handle these challenges, two routing schemes are introduced in this paper. They are effective energy and reliable delivery (EERD) and cooperative effective energy and reliable delivery (CoEERD). In EERD, the packets follow single-path routing and the best forwarder node is selected using a weight function such that packets are transferred via the reliable paths with low energy usage. Packet transfer via a single route in EERD has, however, compromised reliability as the undersea links bear harshness and unpredictability. Therefore, the CoEERD scheme adds cooperative routing to EERD, in which a relay node is introduced between a source−destination pair. The destination requests the relay when the packets it gets from the source are corrupted beyond a threshold... [more]

This work explores the possibility to adopt in organic Rankine cycle (ORC) plants mixtures of water (acting as solvent) plus an organic compound (acting as solute) as the working fluid. Initially an evaluation of the thermodynamic properties of the mixtures is performed, in order to assess their properties, and to point out the molar fractions which entail a near-azeotropic behaviour. Four species from three different classes of chemical compounds are investigated: 2,2,2-trifluoroethanol and n-butanol for alcohols, where the first is fluorinated, acetonitrile for nitrile class and 2-methylpyrazine as a heterocyclic aromatic compound. Simultaneously, the thermal stability of the pure substances considered as the possible solute for the mixtures is experimentally investigated in order to estimate the temperature applicability range. The ORC plant performance, from a low-enthalpy geothermal heat source (hot water stream from 100 to 200 °C), adopting the selected mixtures as the working fl... [more]

Traditional plug-flow anaerobic reactors (PFRs) are characterized by lacking a mixing system and operating at high total solid concentrations, which limits their applicability for several kinds of manures. This paper studies the performance of a novel modified PFR for the treatment of pig manure, characterized by having an internal sludge mixing system by biogas recirculation in the range of 0.270−0.336 m3 m−3 h−1. The influence on the methane yield of four operating parameters (recirculation rate, hydraulic retention time, organic loading rate, and total solids) was evaluated by running four modified PFRs at the pilot scale in mesophilic conditions. While the previous biodegradability of organic matter by biochemical methane potential tests were between 31% and 47% with a methane yield between 125 and 184 LCH4 kgVS−1, the PFRs showed a suitable performance with organic matter degradation between 25% and 51% and a methane yield of up to 374 LCH4 kgVS−1. Operational problems such as sol... [more]

The interest in pellets utilization for households heating has been growing significantly in the last several years. However, the pellets need to meet certain quality requirements, including the mechanical durability (DU) index. In the winter seasons, the pellets are very often stored in unheated in-door systems or are transported by trucks over long distances. As a result, the pellets are exposed to external weather factors, including very low temperatures (even freezing ones), which can have a negative impact on the quality parameters of the fuel. There are several parameters affecting mechanical durability, but little is known about the influence of a very low temperature on the pellet properties. The aim of this research was to analyze the influence of freezing temperature storage on the mechanical durability of commercial pellets made of different biomass. The research was carried out in accordance with the international standard for solid biofuels PN-EN ISO 17831-1:2016-02. The s... [more]

Aiming to maximize the transmission efficiency of inductively coupled power transmission (ICPT) system with the designed output power, a frequency locking method for an ICPT system based on LCC/S compensation topology is proposed in this paper. Firstly, the relationship between compensation component Lf and output power was deduced by the lossless model, and the initial value of Lf was obtained. Then, considering the system loss, the designed output power and frequency were input into the frequency locking program, and Lf and other compensation parameters were dynamically tracked. At the same time, the transmission efficiency of the system was calculated, and the frequency that achieved maximum efficiency was automatically locked when the system met the requirements of the designed output power. Finally, based on the method, the output characteristics of the system were verified by experiments.

This paper proposes an input voltage disturbance suppression control strategy for the unidirectional matrix converter (UMC) with a new modulation scheme enhancing the stability. In the new scheme, the modulation index is directly, rather than reversely, proportional to the instantaneous amplitude of input filter capacitor voltages. Contrary to traditional schemes, the stability of the UMC with this new scheme is even better with the increase of the transferred active power, which is particularly suitable for applications with sinusoidal and balanced input conditions. As to the disturbed input conditions, the new scheme could introduce low-frequency harmonics into output currents. To address this issue, a feedback control strategy of output current amplitude is further proposed to eliminate the additional harmonics. Stability analysis of a UMC with the proposed modulation scheme and feedback control strategy is presented. Experimental results have verified the validity of the proposed c... [more]

The present study scrutinized the impacts of terrain-induced turbulence on wind turbine blades, examining measurement data regarding wind conditions and the strains of wind turbine blades. Furthermore, we performed a high-resolution large-eddy simulation (LES) and identified the three-dimensional airflow structures of terrain-induced turbulence. Based on the LES results, we defined the Uchida-Kawashima Scale_1 (the U-K scale_1), which is a turbulence evaluation index, and clarified the existence of the terrain-induced turbulence quantitatively. The threshold value of the U-K scale_1 was determined as 0.2, and this index was confirmed to not be dependent on the inflow profile, the influence of the horizontal grid resolution, and the influence of the computed azimuth. In addition, we defined the Uchida-Kawashima Scale_2 (the U-K scale_2), which is a fatigue damage evaluation index based on the measurement data and the design value obtained by DNV GL’s Bladed. DNV GL (Det Norske Veritas G... [more]

Concentrator photovoltaic (CPV) systems have displayed an important cost reduction and in the next few years could offer a competitive cost advantage compared to that of flat plate PV systems. Such CPV systems require some cooling methods to overcome high operating temperatures, which reduces their efficiency significantly. On the other hand, thermoelectric generators (TEG) are devices that convert thermal energy directly to electrical energy, provided that there is a temperature difference between its two faces. A hybrid concentrator photovoltaic/thermal (CPV/T) system is proposed in this work. Such a system uses TEG in a two-fold manner: to passively cool down the CPV cell in order to maintain its power conversion efficiency in such high temperature conditions, and to use the accumulated thermal energy to generate electrical energy, which is added to the system’s total power output. Two types of solar cells were investigated, namely, Ga0.35In0.65P/Ga0.83In0.17As with efficiency an of... [more]

In the eddy current braking system of high-speed maglev, the peak braking force and the critical speed are key factors determining the performance of eddy current braking force. In this paper, the analytical formula of eddy current braking force is derived by a subdomain method considering the skin effect of the induction plate, and, subsequently, the characteristics of peak braking force and critical speed are analyzed. The analytical model is set up in a 2D Cartesian coordinate system. The Poisson equations in each subdomain are listed by treating the vector magnetic potential as a variable. By combining the boundary conditions between two adjacent subdomains, the expressions of eddy current density and magnetic density in the induction plate are obtained. Then, the analytical formula of the eddy current braking force is obtained by the Ampere force formula. The results of finite-element analysis confirm the validity of the analytical calculation. The methods of improving the perform... [more]

In this paper, the optimal site and size selection of wind turbines (WTs) is presented considering the maximum allowable capacity constraint with the objective of loss reduction and voltage profile improvement of distribution grids based on particle swarm optimization (PSO as a multi-objective problem using weighted coefficients method. The optimal site, size, and power factor of the WTs are determined using PSO. The proposed method is implemented on 84- and 32-bus standard grids. In this study, PSO algorithm is applied to determine the size, site, and power factor of WTs considering their maximum size constraint (with constraint, variant size) and also not considering their maximum size constraint (without constraint, constant size). The simulation results showed that the PSO is effective to find the site, size, and power factor of WTs optimally in the single and multi-objective problem. The results of this method showed that the power loss is reduced more and voltage profile improved... [more]

Apart from electric vehicles, most internal combustion (IC) engines are powered while burning petroleum-based fossil or alternative fuels after mixing with inducted air. Thereby the operations of mixing and combustion evolve in a turbulent flow environment created during the intake phase and then intensified by the piston motion and influenced by the shape of combustion chamber. In particular, the swirl and turbulence levels existing immediately before and during combustion affect the evolution of these processes and determine engine performance, noise and pollutant emissions. Both the turbulence characteristics and the bulk flow pattern in the cylinder are strongly affected by the inlet port and valve design. In the present paper, large eddy simulation (LES) is appraised and applied to studying the turbulent fluid flow around the intake valve of a single cylinder IC-engine as represented by the so called magnetic resonance velocimetry (MRV) flow bench configuration with a relatively l... [more]

Several window functions are currently applied to improve the performance of the discrete Fourier transform (DFT) harmonic detection method. These window functions exhibit poor accuracy in measuring the harmonic contents of a signal with high-order and weak-amplitude components when the power frequency fluctuates within a small range. In this paper, a minimum side-lobe optimization window function that is aimed at overcoming the abovementioned issue is proposed. Moreover, an improved DFT harmonic detection algorithm based on the six-term minimum side-lobe optimization window and four-spectrum-line interpolation method is proposed. In this context, the minimum side-lobe optimization window is obtained by optimizing the conventional cosine window function according to the optimization rules, and the characteristics of the new proposed window are provided to analyze its performance. Then, the proposed optimization window function is employed to improve the DFT harmonic detection algorithm... [more]

This paper proposes a harmonic compensation control with disturbance rejection function for a standalone inverter. Due to the LC type three-phase three-leg inverter is connected to nonlinear loads, low-order harmonic components appears in the inverter output current. These harmonic current generate harmonic voltage drops when flowing through the filter inductor and the feeder impedance, which causes the output voltage of the inverter distorted. In order to compensate harmonics and produce sinusoidal voltage without additional compensation devices, virtual harmonic impedance method can be added to the fundamental voltage control. Due to the compensation effect of virtual harmonic impedance are very sensitive to the fluctuation of filter inductance. Therefore, inductance variation, as a disturbance in physical system, should be considered. In this paper, linear active disturbance rejection control (LADRC) is proposed in the fundamental voltage control loop to reduce the sensitivity of vi... [more]

Calcium looping is a promising technology to capture CO2 from the process of coal-fired power generation and gasification of coal/biomass for hydrogen production. The decay of CO2 capture activities of calcium-based sorbents is one of the main problems holding back the development of the technology. Taking carbide slag as a main raw material and Ca12Al14O33 as a support, highly active CO2 sorbents were prepared using the hydrothermal template method in this work. The effects of support ratio, cycle number, and reaction conditions were evaluated. The results show that Ca12Al14O33 generated effectively improves the cyclic stability of CO2 capture by synthetic sorbents. When the Al2O3 addition is 5%, or the Ca12Al14O33 content is 10%, the synthetic sorbent possesses the highest cyclic CO2 capture performance. Under harsh calcination conditions, the CO2 capture capacity of the synthetic sorbent after 30 cycles is 0.29 g/g, which is 80% higher than that of carbide slag. The superiority of t... [more]