Developing a regional power system to achieve a high level of integration of national systems requires sufficient development of the regional transmission grid. This is possible only with appropriate schemes for the complete cost−benefit analyses, and cost allocation of these transmission investments, which plays a critical role in the selection of the most efficient network investment and the proper assignment of their cost to the national systems. Network reinforcements affect the operation of power systems and, therefore, the externalities of power generation. This paper examines the impacts of integrating local air pollution damage from power production within the benefit assessment and cost allocation of transmission investments. The paper describes the methodology followed and illustrates its application in a real-life case study where a simplified version of a European network is considered. Within this case study, we have assessed the impact of considering the reduction in air... [more]

Compared with conventional silicon (Si)-based Pulse Width Modulation (PWM) rectifiers, PWM rectifiers based on silicon carbide (SiC) Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs) have significant technical advantages and broad application prospects in terms of efficiency and power density, inherited from the high-speed switching feature. However, high-speed switching also induces gate-source voltage interference, which impacts the overall character of the conversion system. This paper considered the impact of gate-source voltage interference on loss, revealing an efficiency optimization for all-SiC PWM rectifiers. Firstly, this paper theoretically investigated the mechanism of improving the conversion system efficiency by using the 4-pin Kelvin packaged SiC MOSFETs. Then, based on the industrial product case study, loss distribution, using different package styles, was quantitatively analyzed. Finally, experiment test results verified the efficiency improvement of the PW... [more]

Smart cities directly rely on a variety of elements, including water, gas, electricity, buildings, services, transportation networks, and others. Lack of properly designed transportation networks may cause different economic and safety concerns. Highway−rail grade crossings are known to be a hazardous point in the transportation network, considering a remarkable number of accidents recorded annually between highway users and trains, and even solely between highway users at highway−rail grade crossings. Hence, safety improvement at highway−rail grade crossings is a challenging issue for smart city authorities, given limitations in monetary resources. In this study, two optimization models are developed for resource allocation among highway−rail grade crossings to minimize the overall hazard and the overall hazard severity, taking into account the available budget limitations. The optimization models are solved by CPLEX to the global optimality. Moreover, some heuristic algorithms are pr... [more]

In this paper, a novel combined radiation-convection floor heating system is shown. This study uses practice-based learning and investigated the thermal performance of a combined radiation-convection floor heating system with a water heat pump system by evaluating the thermal environment and energy consumption in an experimental test. A new method that analyzed the thermal performance of four different controls was developed and applied. The results of the surface temperature distributions demonstrated that Mode 1, which uses only convection, had the lowest floor temperature and was thus considered inappropriate for occupants who sleep on the floor. By contrast, Modes 2, 3, and 4 showed high floor surface temperatures as hot water was supplied to the radiant heating panel. The predicted mean vote (PMV) results suggest that radiant floor heating is not appropriate for intermittent heating. In other words, occupants of single residences who return home at night will experience a long per... [more]

New small-scale experiments are carried out to study the effect of groundwater flow on the thermal performance of water ground heat exchangers for ground source heat pump systems. Four heat exchanger configurations are investigated; single U-tube with circular cross-section (SUC), single U-tube with an oval cross-section (SUO), single U-tube with circular cross-section and single spacer with circular cross-section (SUC + SSC) and single U-tube with an oval cross-section and single spacer with circular cross-section (SUO + SSC). The soil temperature distributions along the horizontal and vertical axis are measured and recorded simultaneously with measuring the electrical energy injected into the fluid, and the borehole wall temperature is measured as well; consequently, the borehole thermal resistance (Rb) is calculated. Moreover, two dimensional and steady-state CFD simulations are validated against the experimental measurements at the groundwater velocity of 1000 m/year with an averag... [more]

Global issues are such that we should assess and manage a variety of risks and uncertainties. Due to increasing world complexity, the development of an adequate and innovative conceptual framework, anchored in the literature, is required. This article contributes to this effort with an approach particularly relevant to decision-makers dealing with threats of different natures, limited heterogeneous information, and experts’ assessments tainted by doubts. Our approach is based on two pillars: 1) An “acuity scale”, based on the probability of the occurrence of an event, its impact and the experts’ degree of doubt; 2) A taxonomy focused on the concepts of risk, uncertainty, gamble and butterfly ambiguity. Accordingly, we present in a second step the major management implications of such approach. Global policy trends (e.g., sustainability transition) put energy sector decision-makers at the forefront of risk and uncertainty management. Consequently, we carry out a case study focused on Sw... [more]

The assessment of engineering objects in terms of energy consumption is an important part of sustainable development. Many materials, including those from the energy sector, need to undergo earlier processing, e.g., grinding. Grinding processes still demand a significant amount of energy, whereas current energy assessment methods do not take into account important parameters of the process, which makes it difficult to choose their optimal values. The study presents the analysis, testing, and assessment of mechanical engineering systems in terms of the energy consumption involved in the grinding of biomass intended for energy production purposes. A testing methodology was developed to improve the parameters of multi-disc grinding, including the reduction of energy consumption, power input, product quality improvement, and process efficiency. An original model of integrated energy consumption was developed. Tests were carried out on a five-disc grinder for five programs to assess the pro... [more]

Despite the rapid development of photovoltaic (PV) industry, direct current (DC) fault arc remains a major threat to the safety of PV system and personnel. While extensive research on DC fault arc has been conducted, little attention has been paid to the long-time interactions between the PV system and DC arc. In this paper, a simulation system with an arc model and PV system model is built to overcome the inconvenience of the fault-arc experiments and understand the mechanism of these interactions. For this purpose, the characteristics of the series DC arc in a small grid-connected PV system are first investigated under uniform irradiance. Then, by comparing with different arc models, the Habedank model is selected to simulate the fault arc and a method to determine its parameters under DC arc condition is proposed. The trends of simulated arc waveforms are consistent with the measured data, whose fitting degree in adjusted R-squared is between 0.946 and 0.956. Finally, a phenomenon o... [more]

This study investigates the thermal efficiency of a solar air heater (SAH), when it was mounted on a custom-made support frame, and was operated under different air mass flow rate. This SAH is composed of a transparent polycarbonate cover plate, a felt absorber layer, a perforated aluminium back plate and an aluminium frame. The ambient inlet air of this SAH is heated as it passes through the perforated back plate and over the felt absorber layer. The heated air is blown out through the outlet. Studies of SAHs with a similar design to this SAH were not found in the literature. The experiment was carried out at Massey University, Auckland campus, NZ (36.7° S, 174.7° E). The global horizontal solar irradiance, the ambient temperature and the wind speed were recorded using an on-site weather station. Temperature and velocity of the air at the outlet were measured using a hot wire anemometer. During the experiment, the air mass flow rate was between 0.022 ± 0.001 kg/s and 0.056 ± 0.005 kg/... [more]

The increased rates of urbanization and industrialization of the 20th and 21st centuries have dramatically changed the land use and cover of modern cities, contributing to the degradation of the urban microclimate and the rise of the ambient urban air temperatures. Given the multiple negative energy, environmental and social consequences of urban warming, the present paper summarizes the findings of previous studies, assessing the main causes of the phenomenon along with the key investigation methods involving experimental and computational approaches. There follows a description of the most common mitigations, and adaption strategies towards the attenuation of urban warming are described. The analyzed elements include the addition of green spaces such as trees, grass and green roofs; changes on the albedo of the urban surfaces and water-based techniques, as well as a combination of them. The discussion of the reported findings in the existing literature clearly reflects the impact of... [more]

Electric vehicles (EVs) have attracted growing attention in recent years. However, most existing research has not utilized actual traffic data and has not considered real psychological decision-making of owners in analyzing the charging demand. On this basis, an urban EV fast-charging demand forecasting model based on a data-driven approach and human decision-making behavior is presented in this paper. In this methodology, Didi ride-hailing order trajectory data are firstly taken as the original dataset. Through data mining and fusion technology, the regenerated data and rules of traffic operation are obtained. Then, the single EV model with driving and charging behavior parameters is established. Furthermore, a human behavior decision-making model based on Regret Theory is introduced, which comprises the utility of time consumption and charging cost to plan driving paths and recommend fast-charging stations for vehicles. The rules obtained from data mining together with established mo... [more]

Operational control strategies for the heating system of a single-family house with exhaust air heat pump and photovoltaic system and “smart” utilization of energy storage have been developed and evaluated in a simulation study. The main aim and novelty of this study is to evaluate the impact on the benefit of these advanced control strategies in terms of performance (energy use and economic) for a wide range of boundary conditions (country/climate, occupancy and appliance loads). Short-term weather data and historic price data for the same year as well as stochastic occupancy profiles that include the domestic hot water load are used as boundary for a parametric simulation study for the system modeled in detail in TRNSYS 17. Results show that the control using a forecast of dynamic electricity price leads to greater final energy savings than those due to the control using thermal storage for excess PV production in all of the examined locations except Sweden. The impact on self-consum... [more]

The prediction of electricity generation is one of the most important tasks in the management of modern energy systems. Improving the assertiveness of this prediction can support government agencies, electric companies, and power suppliers in minimizing the electricity cost to the end consumer. In this study, the problem of forecasting the energy demand in the Brazilian Interconnected Power Grid was addressed, by gathering different energy-related datasets taken from public Brazilian agencies into a unified and open database, used to tune three machine learning models. In contrast to several works in the Brazilian context, which provide only annual/monthly load estimations, the learning approaches Random Forest, Gradient Boosting, and Support Vector Machines were trained and optimized as new ensemble-based predictors with parameter tuning to reach accurate daily/monthly forecasts. Moreover, a detailed and in-depth exploration of energy-related data as obtained from the Brazilian power... [more]

Hydraulic fracturing has been widely used in recent years as a key technology to improve energy mining efficiency in petroleum and geothermal industries. Laboratory hydraulic fracturing experiments recently were completed in six large-scale 300 × 300 × 300 mm rock specimens to better understand this complex process of hydraulic fracturing. When injection flow rate increases from 5 to 30 mL/min. The fracture initiation pressures and breakdown pressures increase, the propagation times and post-fracturing pressures decrease. The fracture geometries are observed and analyzed, mean injection power is proposed and results show that it could be used to roughly estimate the fracture total lengths. Moreover, the fracture permeabilities based on the pressure data are calculated and linearly ascend with the increase of injection flow rates. These results can provide some reasonable advice for implementing hydraulic fracturing reservoir simulations and improving energy production efficiency on app... [more]

In this paper, a co-estimation scheme of the state of charge (SOC) and available capacity is proposed for lithium−ion batteries based on the adaptive model-based algorithm. A three-dimensional response surface (TDRS) in terms of the open circuit voltage, the SOC and the available capacity in the scope of whole lifespan, is constructed to describe the capacity attenuation, and the battery available capacity is identified by a genetic algorithm (GA), together with the parameters related to SOC. The square root cubature Kalman filter (SRCKF) is employed to estimate the SOC with the consideration of capacity degradation. The experimental results demonstrate the effectiveness and feasibility of the co-estimation scheme.

The field of computational fluid dynamics has been rekindled by recent researchers to unleash this powerful tool to predict the ejector design, as well as to analyse and improve its performance. In this paper, CFD simulation was conducted to model a 2-D axisymmetric supersonic ejector using NIST real gas model integrated in ANSYS Fluent to probe the physical insight and consistent with accurate solutions. HFOs (1234ze(E) and 1234yf) were used as working fluids for their promising alternatives, low global warming potential (GWP), and adhering to EU Council regulations. The impact of different operating conditions, performance maps, and the Pareto frontier performance approach were investigated. The expansion ratio of both refrigerants has been accomplished in linear relationship using their critical compression ratio within ±0.30% accuracy. The results show that R1234yf achieved reasonably better overall performance than R1234ze(E). Generally, by increasing the primary flow inlet satura... [more]

One way of handling short-time short-circuits without causing equipment failure is the management of the reclose function integrated into smart switchboard which is described in this article. Due to the cost of the application, the optimal placement of such equipment must be well-planned. During the planning of the placement optimization of a low-voltage electricity network quality, the increase of the consumer supply security must be considered along with the best economic utilization. The research presented in this article aims to introduce a new special decision support methodology calculated with these variables. The management of smart switchboard (SSB) tool installation into low voltage (LV) network was investigated. The selection of the placement nodes is based on the complex investigation of the network characteristics. Investigation is performed by empiric analysis. This method can support the power companies to make the optimal decision. The presented new device can have outs... [more]

This paper aims to investigate the time-varying influences of major crude oil-producing countries on Brent oil prices, with seven-panel data over the observation years of 1998 to 2018. We create seven panels with 36 monthly data for each and estimate the contributions of individual producing countries to oil price changes with a multivariate regression technique of ordinary least squares. Most existing researches have focused on identifying relationships among oil price, market fundamental factors, macroeconomic variables, and geopolitical events in broad perspectives. However, this paper undertakes a longitude/panel analysis of nine oil producers’ influences, with the Organisation for Economic Co-operation and Development (OECD) consumption and the U.S. Dollar Index (USDX) on oil prices in each panel and intends to identify which producers have statistically significant influencing weights on oil prices. We believe that this research contributes to the body of knowledge in better unde... [more]

Active power filters (APFs) are dynamic power electronic devices that suppress harmonics and reactive power. To simplify the detection and extraction of traditional APF harmonics and reactive current, this paper proposes a direct source current control based on a three-phase three-wire shunt APF. The compensation principle and control method of the source current are analyzed systematically. The currents can be controlled without static errors by a proportional-integral (PI) controller in d-q rotating coordinates. Therefore, the compensation accuracy and dynamic performance of the system can be improved by the control strategy. Moreover, considering the grid voltage fluctuations, a droop regulator is proposed to address the impact of DC-link voltages on APF power losses and compensation performance. The regulator is combined with a traditional voltage outer loop PI control to achieve a comprehensive optimization between the power loss and compensation performance of the APF system. Fin... [more]

The international crude oil market plays an important role in the global economy. This paper uses a variable time window and the polynomial decomposition method to define the trend term of time series and proposes a crude oil price forecasting method based on time-varying trend decomposition to describe the changes in trends over time and forecast crude oil prices. First, to characterize the time-varying characteristics of crude oil price trends, the basic concepts of post-position intervals, pre-position intervals and time-varying windows are defined. Second, a crude oil price series is decomposed with a time-varying window to determine the best fitting results. The parameter vector is used as a time-varying trend. Then, to quantitatively describe the continuation of the time-varying trend, the concept of the trend threshold is defined, and a corresponding algorithm for selecting the trend threshold is given. Finally, through the predicted trend thresholds, the historical reference da... [more]

Nowadays, many buildings are equipped with various energy sources. The challenge is how to efficiently utilize their energy production. This includes decreasing the share and costs of external energy—usually electrical energy delivered from the grid. The following study presents a qualitative approach with a combined control to solve the problem. The approach is demonstrated using a simulated residential building equipped with a hybrid energy system: a thermal energy storage combined with an electrical heater, a geothermal heat pump and a solar thermal collector. Consequently, the share of renewable energy was increased and, conversely, costs of the external energy from grid decreased by 12.2%. The results were based on a qualitative approach and the algorithm which predicts the need of energy of the building over the next 6 h with the aid of weather forecasting. This approach included a storage tank of 300 L. The energy costs can be further decreased 7.7% by increasing thermal storage... [more]

This paper presents research on a hybrid photovoltaic-battery energy storage system, declaring its hourly production levels as a member of a balancing group submitting common scheduling unit to the day-ahead market. It also discusses the variability of photovoltaic system generation and energy storage response. The major research questions were whether the operation of a hybrid photovoltaic-battery energy storage system is viable from the technical and economic viewpoint and how to size battery energy storage for that purpose. The DIgSILENT PowerFactory environment was used to develop the simulation model of postulated hybrid system. Then, tests were conducted on real devices installed in the LINTE^2 laboratory at Gdańsk University of Technology, Poland. Firstly, power generation in the photovoltaic system was modeled using hardware in the loop technique and tested in cooperation with emulated photovoltaic and real battery energy storage system (lithium-ion battery, 25 kWh). Secondly,... [more]

Energy access remains a challenge for many countries, as recognized by sustainable development goal 7 of the United Nations Development Programme. Although the Myanmar government has set a target of 100% electrification by 2030, less than half of the households are currently connected to the national grid. To expedite electrification, decentralized approaches should be considered. Mini-grids are an effective alternative that can fill the gap between a solar home system and the national grid; however, many of the existing mini-grids in Myanmar are powered by diesel generators. Diesel fuel is significantly more expensive in rural areas than in urban areas due to high transportation costs. Although mini-grids powered by solar photovoltaics and batteries are cost-competitive with diesel generators, the deployment of renewable energy-based mini-grids is slow. In this study, we analyzed the barriers to mini-grid deployment and prioritized the barriers. We conducted a questionnaire survey wit... [more]

The study aimed to generate informative data on solar radiation in order to establish sustainable solar energy that will support domestic needs and agricultural production and processing industries in Jubek State, South Sudan. Solar radiation intensity, timely data variation, site landscape, and environment were considered. Input data used was remotely sensed data, digital elevation model, land used land cover (LULC) processed with Aeronautical Reconnaissance Coverage Geographic Information System (ArcGIS). The spatio-temporal distribution analysis results show that (62%) 11,356.7 km2 of the study area is suitable for solar energy farm with an annual potential of about 6.05 × 109 GWh/year out of which only 69.0158 GW h/year is required to meet the local demand of 492,970 people residing in the study area, i.e., 0.11% (1249.2 km2) of Jubek State. Solar energy required for producing and processing 1 ton of different crop ranges between 58.39 × 10−6 and 1477.9 × 10−6 GWh and area size bet... [more]

Within the United States solar energy industry, there is a general motto of “set it and forget it” with solar energy. This notion is derived from much of the research and reliability studies around the photovoltaic (PV) panels themselves, not necessarily the PV system as a whole (including the inverter and other components). This implies that maintenance and regular monitoring is not needed. Yet many things can go wrong to cause the actual performance to deviate from the expected performance. If failures and/or unanticipated degradation issues go undetected, they will lead to reduced energy generation (and associated electricity credits) and/or potential loss of component warranty because of manufacturer turnover. Given the size of the problem and gaps with current solutions, the authors propose that PV system owners need an unbiased third-party off-the-shelf system-level predictive maintenance tool to optimize return-on-investment and minimize time to warranty claim in PV installation... [more]