Energy communities and their resiliency are both relatively new subjects of interest that need deeper analysis. The concepts are emerging in the current trend of energy decarbonization, combined with unpredictable external factors, such as extreme weather, or nearby conflicts, such as wars. To be resilient against electrical network supply outages or heavy blackouts, energy communities need appropriate design of their electrical microgrids to maintain an acceptable level of activity in both normal and critical situations. The paper deals with aspects of the design of the electrical network used by energy communities, seen as microgrids designed to offer an acceptable level of safe operation and energy resilience. While electrical network resilience covers both the public network (main grid) and local microgrid of an energy community, the paper focuses on the safe operation and resilience related to the local microgrid as a distinct goal from the one of preserving the main grid’s functi... [more]

This article presents an analysis of the driveline operation of a high-mobility Jelcz 442.32 wheeled vehicle, which uses rigid drive axles connected to drive shafts with two universal joints (another name for the Cardan joints) due to the occurrence of kinematic incompatibility. The conditions for the correct connection of the drive shafts with two universal joints (Cardan joints) were presented, and the kinematic ratio of the complete drive shaft was defined. In the analysis of kinematic incompatibility regarding (but not limited to) the method of loading the vehicle, selected characteristic conditions of vehicle movement and the initial values of the angular setting of the rigid driving axles in relation to the vehicle body were presented. It has been shown that, in the analyzed vehicle, the kinematic incompatibility in the driveline is constantly present, and the value of this incompatibility, represented by the temporary ratio of drive shafts, depends on, among other things, the wa... [more]

Today’s company has to operate in a turbulent market environment, where the policy of sustainable development is still gaining importance. Therefore, it has been forced to look for a strategic orientation that would allow it to face the growing demands of the changing reality. Each organization must therefore adapt to the changes in the environment. These changes include the need to implement sustainable energy usage practices. This article presents determinants that build such an attitude in a company and thus contribute to the sustainable development of the organization. This article is based on the results of an empirical study conducted in December 2021 on a sample of 690 respondents (later, due to the purpose of the study, the sample was narrowed to 578 working people) using a survey questionnaire. A structural model was estimated using the maximum likelihood method. It allowed us to determine the variables that influence the degree to which companies use energy saving practices,... [more]

Waste-to-energy (WtE) is national policy. From this view, WtE technology has been promoted. Many WtE projects in Thailand were unsuccessful due to several problems. This research aimed to analyze the key barriers impacting the WtE project development in Thailand. The Interpretive Structural Model (ISM) and Cross-Impact Matrix Multiplication Applied to Classification (MICMAC) analysis tool have been used to evaluate the barriers that significantly in the development of WtE projects. In this study, WtE projects focused on electricity power generation in order to correspond to the Alternative Energy Development Plan (AEDP) target and power purchase agreement constrain of the government. The barriers were obtained from six sections consisting of social issues, environment, national policy, technology, economy, and project management. From six sections, there are 20 barriers that were identified. The ISM and MICMAC analysis showed that the key barriers impacting the WtE projects development... [more]

This study presents a new Model Predictive Controller (MPC), built with algorithms based on Paraconsistent Annotated Logic (PAL), with application examples in the excitation control of a synchronous generator. PAL is a non-classical evidential and propositional logic that is associated with a Hasse lattice, and which presents the property of accepting the contradiction in its foundations. In this research, the algorithm was constructed with a version of the PAL that works with two information signals in the degrees of evidence format and, therefore, is called Paraconsistent Annotated Logic with annotation of two values (PAL2v). For the validation of the algorithmic structure, the computational tool MATLAB® Release 2012b, The MathWorks, Inc., Natick, MA, United States was used. Simulations were performed which compared the results obtained with PPC-PAL2v to those obtained in essays with the AVR (Automatic Voltage Regulator) controls in conjunction with the PSS (Power System Stabilizer)... [more]

Bioethanol and dimetyl carbonate (DMC) are considered alternative fuels and additives to the synthesis compounds used now, since bioethanol is a biofuel and dimethyl carbonate (DMC) is non-toxic, biodegradable and can be produced in a cleaner way. In this study, the effect of adding dimethyl carbonate (DMC) and ethanol to gasoline on the volatility was investigated. The volatility was the main goal of this research but also, the effect on the antiknock properties was studied. Mixtures of gasoline with DMC or with bioethanol were prepared in different proportions of additive: 3%, 6% and 9% v/v. Additionally, mixtures with 3% v/v ethanol plus 3% or 6% v/v DMC, and3% DMC plus 6% v/v ethanol were prepared. For the volatility evaluation, the ASTM distillation curve and vapor pressure of these mixtures were determined experimentally in order to predict the performance of the resulting fuels. When adding oxygenated compounds, the increase in vapor pressure was proportional to the additive qua... [more]

This paper presents the jig operating properties of the selected final parameters of the hard coal concentrate. The quality parameters of the product, such as the yield and ash content, were evaluated in terms of the technical and hydrodynamic parameters of the jig’s operation. The research program included a series of experiments in which the efficiency and the amount of hutch water were changed. The variables selected and analyzed were divided into two categories, i.e., one related to the characteristics of the concentrate produced, and the other to the characteristics of the jig operation. Models were built for narrowed particle size fractions based on concentrate yield and ash content in the concentrate. In addition, a multidimensional analysis was performed, considering variables such as machine throughput, which was determined by the flow rate of the material, the amount of hutch water, the quality of the concentrate, and the amount of concentrate, as well as the accuracy of the... [more]

The use of digital twins in smart power systems at the stages of the life cycle is promising. The dynamics of such systems (smart energy renewable sources, smart energy hydrogen systems, etc.), are determined mainly by the physical and chemical processes occurring inside the systems. The basis for developing digital twins is reliable mathematical models of the systems. In the present paper, the authors present a method of energy processes mathematical prototyping—an overall approach to modeling processes of various physical and chemical natures based on modern non-equilibrium thermodynamics, mechanics, and electrodynamics. Controlled parameters are connected with measured ones by developing a theoretically correct system of process dynamics equations with accuracy up to the experimentally studied properties of substances and processes. Subsequent transformation into particular mathematical models of a specific class of systems makes this approach widely applicable. The properties of su... [more]

The sorting problem in the Multi-criteria Decision Analysis (MCDA) has been used to address issues whose solutions involve the allocation of alternatives in classes. Traditional multi-criteria methods are commonly used for this task, such as ELECTRE TRI, AHP-Sort, UTADIS, PROMETHEE, GAYA, etc. While using these approaches to perform the sorting procedure, the decision-makers define profiles (thresholds) for classes to compare the alternatives within these profiles. However, most such applications are based on subjective tasks, i.e., decision-makers’ expertise, which sometimes might be imprecise. To fill that gap, in this paper, a comparative analysis using the multi-criteria method ELECTRE TRI and clustering algorithms is performed to obtain an auxiliary procedure to define initial thresholds for the ELECTRE TRI method. In this proposed methodology, K-Means, K-Medoids, Fuzzy C-Means algorithms, and Bio-Inspired metaheuristics such as PSO, Differential Evolution, and Genetic algorithm f... [more]

Due to the increasingly restrictive exhaust emissions requirements from conventional vehicles, the internal combustion engine start-up seems to be most important part of engine operation. The period immediately after starting the engine is the time when the exhaust emissions are highest, thus, this aspect is currently subject to heavy analysis. The article evaluates the impact of the engine thermal state during its start-up for a Euro 5 emission class vehicle type approval test. The engine thermal state during start-up turned out to have a crucial influence (throughout the approval test) on the results of the hydrocarbons road emission (a difference of about 1500%) and the road emission of carbon monoxide (63%). The remaining road exhaust emission values were less sensitive to the thermal state of the engine during start-up—the nitrogen oxides emission value increased by 18% (for a cold start compared to a hot start), and the road fuel consumption (and thus the emission of carbon dioxi... [more]

The fabrication of high-capacity, binder-free Li−ion battery anodes using a simple and efficient manufacturing process was reported in this research. The anode material for lithium−ion batteries utilized is a combination of two-dimensional (2D) carbon nanowalls (CNWs) and Cu nanoparticles (improved rate performance and capacity retention) or Si (high capacity) nanoparticles. A methane (CH4) and hydrogen (H2) gas mixture was employed to synthesize CNWs on copper foil through microwave plasma-enhanced chemical vapor deposition (PECVD). The Cu or Si nanoparticles were then deposited on the CNW surface using an RF magnetron sputtering equipment with four-inch targets. To analyze the electrochemical performance of the LIBs, CR2032 coin-type cells were fabricated using anode materials based on CNWs and other components. It was confirmed that the Cu−CNW demonstrates improved rate performance, increased specific capacity, and capacity retention compared with traditional anodes. Additionally, C... [more]

In this study, a comparative sizing design for renewable power systems was developed based on HOMER (Hybrid Optimization of Multiple Energy Resources) and iHOGA (improved Hybrid Optimization by Genetic Algorithms) simulators. A comparative analysis of the solutions obtained with iHOGA and HOMER simulators for the same hybrid renewable power system (HRPS) is presented in detail. The system contained a new hybrid configuration that used fuel cell (FC) as a green energy source, replacing the polluting diesel generator system, as well as other renewable energy sources, namely, photovoltaic panels, wind turbine, a battery stack, power converters, and electric load. The same case study was carried out for the design of the hybrid system using HOMER and iHOGA simulators to perform a comparative analysis of the solutions obtained for potential investment. The analysis showed a higher share of renewable energy for iHOGA (92%) compared to HOMER (81%), so the first design produced 51.61 kg/year l... [more]

The most likely intentional high-power electromagnetic (EM) interference, threatening the operation of technologically advanced electronic infrastructure, will have the forms of sub- and nanosecond ultra-wideband (UWB) pulses, several hundred nanosecond pulses of attenuated sinusoids, and sub- and microsecond sinusoidal pulses. The protection of electronic objects against high-power EM pulses is provided by different types of metal enclosure shields with technological apertures, inside which sensitive electronic objects can be placed. These technological apertures allow external EM interference to penetrate into the enclosure, making the EM shielding imperfect. The EM protection against the EM pulses has been mainly assessed based on the so-called shielding effectiveness (SE) parameters. The SE parameters (SEe and SEm for the electric and magnetic fields, respectively) are useful for designing and comparing EM shields. In relatively small shielding enclosures, which have recently becom... [more]

The energy crisis, an increasing concern of the industrial sector, is characterized by increased energy costs and low energy availability. As part of an effort to increase energy efficiency, the present study assessed the impact of applying lean tools on the energy consumption of a manufacturing organization. Using the Kaizen approach, the organization’s processes were analyzed to identify the main vulnerabilities and make the required changes to increase consumption performance. Several technical improvements were performed to reach increased energy efficiency. Results showed an energy efficiency increase; consumption was reduced by up to 7.5% in the production line, 3.5% in the extruder stage, and up to 20% for the injection stage of the manufacturing process. The results suggest that the organization’s energy reduction targets have been achieved. Standardization of procedures was useful in the development of Kaizen projects which could be applied with certain limitations. The implic... [more]

The implementation of renewable energy sources and heat pumps with natural refrigerants in the existing 3rd-generation district heating (DH) systems is a promising technology for the conversion to a 4th-generation DH system. This paper aims to investigate this transition through a case study for the existing DH system in Croatia. The district of Rijeka, which is considered in the case study, has an existing 3rd-generation DH system with a capacity of 9.2 MW, which was originally designed for a temperature regime of 130/70 °C and produces thermal energy from natural gas. In order to use heat pumps efficiently in such a system, the temperature of the distribution system and the energy consumption should be reduced. Trnsys software was used to perform complete dynamic simulations of the DH system. Used baseline models were validated according to the actual energy consumption reported by the heat supplier. The application of heat pumps with natural refrigerants in combination with on-site... [more]

This paper focuses on the application of speed-regulated compressors (SRCs) to cover changeable heat loads with high efficiency in conventional air conditioning systems (ACS) as well as in the more advanced variable refrigerant flow (VRF)-type outdoor and indoor ACS. In reality, an SRC is an oversized compressor, although it can operate efficiently at part loads. The higher the level of regulated loads (LRL) of the SRC, the more the compressor is oversized. It is preferable to reduce the size of the SRC by covering the peak loads and recouping the excessive refrigeration energy reserved at decreased actual loads within the range of regulated loads. Therefore, the range of changeable loads is chosen as the object to be narrowed by using the reserved refrigeration capacity. Thus, the general fundamental approach of dividing the overall heat load range of the ACS into the ranges with changeable and unchangeable loads, as previously developed by the authors, is applied for the range of pri... [more]

Energy demand modelling is essential for reliable informing and framing energy policy decisions. More accurate modelling betters ensuring availability of energy and energy quality. Energy availability is related to energy access across the country and defines important economic measures such as energy poverty, which plays a critical role in developing countries. Energy quality is related to the reliability of the supply for correctly estimating energy needs. To incorporate spatial and temporal components of energy in a way that availability and quality are accurately assessed, this article discussed a number of suitable task methods for this (Second-generation GAMs with one-dimensional smoothers: Cyclic/Non-Cyclic Cubic Splines and two-dimensional smoothers: Markov Random Fields/Tensor Splines Interactions). The results showed that the complete consideration of both temporal and spatial aspects leads to a better fitted model which explains more of the data variation.

This study examines the energy intensity (EI), energy efficiency (EE), and economic growth, measured by the type of returns to scale (RTS), of 37 nations in the Organization for Economic Co-operation and Development (OECD) from 2000 to 2019. We apply a non-parametric approach to estimate the three measures from their consumption of four primary energy sources, such as coal, gas, oil, and zero emission (e.g., renewable and nuclear power) as inputs and gross domestic product (GDP) as an output. In this study, we have the two types of efficiency measures over time: window-based and cross-sectional-based measures. Three findings are identified from our empirical study. First, the operationally efficient group, including France, Iceland, Japan, Switzerland, UK, and USA, presented a stable status of full efficiency in the window-based efficiency measure. Iceland and Switzerland were also in the higher efficiency group based on the cross-sectional measure. Their efficiencies were high and sta... [more]

Water can be an irritant to a power transformer, as it is recognized as a major hazard to the operation of transformers. The water content of a transformer insulation system comprises the water in the transformer insulation oil and in the cellulose paper. The increase in the water content in the insulation system leads to reduced breakdown voltage, accelerated aging of the oil−paper insulation system, and the possibility of producing bubbles at high temperatures. Therefore, various techniques have been applied to measure the water content in both oil and paper insulation. This article comprehensively reviews and analyzes the methods (technically or nontechnically) that have been used to monitor the water content in transformer insulation systems. Apart from discussing the advantages and major drawbacks of these methods, the accuracy, measurement time, and cost of each technique are also elucidated in this review. This review can be extremely useful to the utility in monitoring and main... [more]

To solve the problem of feature selection and error correction after mode decomposition and improve the ability of power load forecasting models to capture complex time series information, a two-stage short-term power load forecasting method based on recursive feature elimination with a cross validation (RFECV) algorithm and time convolution network−efficient channel attention mechanism−long short-term memory network (TCN−ECA−LSTM) is presented. First, the load sequence is decomposed into a relatively stable set of modal components using variational mode decomposition. Then, the RFECV-based method filters the feature set of each modal component to construct the best feature set. Finally, a two-stage prediction model based on TCN−ECA−LSTM is established. The first stage predicts each modal component and the second stage reconstructs the load forecast based on the predicted value of the previous stage. This paper takes actual data from New South Wales, Australia, as an example, and the r... [more]

The valorization of chicken manure via pyrolysis can give biowaste a second life to generate value and contribute to the circular economy. In the present study, the thermal degradation and pyrolysis characteristics of chicken manure pyrolysis were investigated via thermogravimetric analyses (TGA) coupled with optimization methods. Thermogravimetric data were obtained for the samples at five heating rates of 5, 10, 20, 30 and 50 °C/min over a range of temperature under inert conditions. The manure devolatilization process was initiated at between 328 and 367 °C to overcome the global activation energy barrier. The determined activation energy of the manure via Flynn−Wall−Ozawa (FWO), Kissinger−Akahira−Sunose (KAS), Friedman and Kissinger methods was in the range of 167.5−213.9 kJ/mol. By using the particle swarm optimization (PSO) method, the pyrolytic kinetic parameters of the individual component present in the manure were calculated, in which the activation energy for cellulose (227.... [more]

Understanding how the pressure level affects the efficiency of liquid piston gas compression is essential for a greater applicability of the technology in compressed air energy storage. To explore the impacts, compression starting at three different initial pressure levels (1, 2, 3 bar) with a pressure ratio of 2 is performed, and how isothermal compression efficiencies are affected depending on the initial pressures is analyzed. Under the experimental conditions, higher initial pressure leads to lower isothermal efficiency. Air dissolution during the compression is also investigated because the chamber is a pressure-varying and a liquid-containing environment, where the gas solubility changes during the process. Evaluating the dissolution is critical as it affects the energy output when the compressed air is expanded to regenerate the energy. The changes in the air mass and the retrievable volume of the air after expansion are quantified based on Henry’s law. For a compression at high... [more]

Organic solar cells (OSCs) represent a promising emerging photovoltaic technology offering such benefits as light weight, mechanical flexibility, semitransparency, environmental friendliness and aesthetic design of solar panels. Furthermore, organic solar cells can be produced using scalable and high-throughput solution-based printing and coating technologies, which are expected to lead to very low product costs. Fullerene derivatives have been used as acceptor materials in virtually all efficient organic solar cells for more than two decades, following the demonstration of the first proof-of-concept devices in the middle of 1990s. Still, the power conversion efficiencies of fullerene-based organic solar cells became stuck at around 12% due to the suboptimal optoelectronic properties of conventional fullerene acceptors. Therefore, the latest efficiency records (>18%) for organic solar cells were set using different types of non-fullerene acceptor (NFA) materials with tailorable propert... [more]

Extreme weather conditions and natural disasters (ND) are the main causes of power outages in the electric grid. It is necessary to strengthen the electrical power system’s resilience during these catastrophic occurrences, and microgrids may be seen as the best way to achieve this goal. In this paper, two different energy system scenarios were proposed for increasing the resiliency of the electric power system during random outages. In the first scenario, a diesel generator (DG) was used to deliver energy to key loads during grid disruptions, in conjunction with a utility electric grid (UEG) and local electric load (ELL). A grid-connected ad hoc microgrid (MG) with a photovoltaic (PV) system, a battery energy storage (BES) system, and local electric loads made up the second scenario. The PV system and the BES system were used to supply the key loads with electricity during the outage. The major aim of this research was to compare the two resilient-based systems from the perspectives of... [more]

Implementing hybrid renewable energy systems in hospitals, as an applicable solution to improve the sustainability of power systems, was studied. Several hybrid renewable configurations with detailed technical and economic information were proposed by HOMER Pro software, and the most cost-effective system was introduced as a combination of PV (350 kW), WT (1 unit, 25 kW), and DG (700 kW), with a total net present cost of USD 3.25 million and cost of energy of USD 0.0543/kWh. To consider all aspects of sustainability for choosing the optimal system, a Multi-Criteria Decision-Making approach, considering technical, environmental, economic, and energy security criteria, was applied using the TOPSIS method. According to ISO 21929, the weighting of the criteria was performed depending on how indicators affected the key areas of protection. By using the TOPSIS technique, a system with a larger renewable proportion, more variety, and less reliance on diesel was chosen. Thus, the optimal choic... [more]