Three types of organic Rankine cycles (ORCs): basic ORC (BORC), ORC with single regeneration (SRORC) and ORC with double regeneration (DRORC) under the same heat source have been simulated in this study. In the following, the energy and exergy analysis and the advanced exergy analysis of these three cycles have been performed and compared. With a conventional exergy analysis, researchers can just evaluate the performance of components separately to find the one with the highest amount of exergy destruction. Advanced analysis divides the exergy destruction rate into unavoidable and avoidable, as well as endogenous and exogenous, parts. This helps designers find more data about the effect of each component on other components and the real potential of each component to improve its efficiency. The results of the advanced exergy analysis illustrate that regenerative ORCs have high potential for reducing irreversibilities compared with BORC. Total exergy destruction rates of 4.13 kW (47%) a... [more]

Sustainability is increasingly being addressed globally. The manufacturing industry faces various constraints and opportunities related to sustainable development. Currently, there are few methodological frameworks for evaluating sustainable organizational development. Assessing and improving organizational capacity is important for producers and researchers in the field and local, national, and international authorities. This research proposes a hierarchical framework for sustainability assessment of manufacturing industry in Romania. The proposed framework integrates performance elements and measures to improve all the processes and activities from the triple perspective of sustainability. Sustainability assessment captures the entire supply chain of the organization, including stakeholder interests and end-of-life directions for products. To establish the elements to be integrated in the development of the proposed framework, market research (online questionnaire-for the characteriz... [more]

Real-world problems such as scientific, engineering, mechanical, etc., are multi-objective optimization problems. In order to achieve an optimum solution to such problems, multi-objective optimization algorithms are used. A solution to a multi-objective problem is to explore a set of candidate solutions, each of which satisfies the required objective without any other solution dominating it. In this paper, a population-based metaheuristic algorithm called an artificial electric field algorithm (AEFA) is proposed to deal with multi-objective optimization problems. The proposed algorithm utilizes the concepts of strength Pareto for fitness assignment and the fine-grained elitism selection mechanism to maintain population diversity. Furthermore, the proposed algorithm utilizes the shift-based density estimation approach integrated with strength Pareto for density estimation, and it implements bounded exponential crossover (BEX) and polynomial mutation operator (PMO) to avoid solutions tra... [more]

A microbial fuel cell (MFC) is a potentially viable renewable energy option which promises effective and commercial harvesting of electrical power by bacterial movement and at the same time also treats wastewater. Microbial fuel cells are complicated devices and therefore research in this field needs interdisciplinary knowledge and involves diverse areas such as biological, chemical, electrical, etc. In recent decades, rapid strides have taken place in fuel cell research and this technology has become more efficient. For effective usage, such devices need advanced control techniques for maintaining a balance between substrate supply, mass, charge, and external load. Most of the research work in this area focuses on experimental work and have been described from the design perspective. Recently, the development in mathematical modeling of such cells has taken place which has provided a few mathematical models. Mathematical modeling provides a better understanding of the operations and t... [more]

In conditional microbial screening, a limited number of candidate strains are tested at different conditions searching for the optimal operation strategy in production (e.g., temperature and pH shifts, media composition as well as feeding and induction strategies). To achieve this, cultivation volumes of >10 mL and advanced control schemes are required to allow appropriate sampling and analyses. Operations become even more complex when the analytical methods are integrated into the robot facility. Among other multivariate data analysis methods, principal component analysis (PCA) techniques have especially gained popularity in high throughput screening. However, an important issue specific to high throughput bioprocess development is the lack of so-called golden batches that could be used as a basis for multivariate analysis. In this study, we establish and present a program to monitor dynamic parallel cultivations in a high throughput facility. PCA was used for process monitoring and a... [more]

Polypropylene (PP) is flammable material, which brings latent danger to the environment and human society. Therefore, developing new environmentally friendly and effective flame-retardant is one of the most important ways to improve the flame retardancy of PP and improve safety during its lifetime. Herein, we describe the synthesis of five sym-2,4,6-trisubstituted-s-triazine derivatives, namely, N2,N4,N6-triphenyl-1,3,5-triazine-2,4,6-triamine (TAT), N2,N4,N6-tris(4-bromophenyl)-1,3,5-triazine-2,4,6-triamine (TBAT), N2,N4,N6-tris(4-chlorophenyl)-1,3,5-triazine-2,4,6-triamine (TCAT), 4,4′,4″-((1,3,5-triazine-2,4,6-triyl) tris(azanediyl)) triphenol (THAT), and N2,N4,N6-tris(4-methoxyphenyl)-1,3,5-triazine-2,4,6-triamine (TMAT), from the reaction of cyanuric chloride and p-substituted aniline employing conventional heating or microwave irradiation. The prepared compounds characterized by different techniques, such as Fourier-transform infrared (FTIR), Ultra-Violet and Visible (UV-Vis), Nu... [more]

Renewable energies such as solar, hydro or wind power are in principal abundant but subjected to strong fluctuations [...]

Carbon capture, utilization, and storage (CCUS) is a combination of technologies capable of achieving large-scale reductions in carbon dioxide emissions across a variety of industries. Its application to date has however been mostly limited to the power sector, despite emissions from other industrial sectors accounting for around 30% of global anthropogenic CO2 emissions. This paper explores the challenges of and requirements for implementing CCUS in non-power industrial sectors in general, and in the steel sector in particular, to identify drivers for the technology’s commercialization. To do so we first conducted a comprehensive literature review of business models of existing large-scale CCUS projects. We then collected primary qualitative data through a survey questionnaire and semi-structured interviews with global CCUS experts from industry, academia, government, and consultancies. Our results reveal that the revenue model is the most critical element to building successful CCUS... [more]

Two-dimensional layered nanomaterial Ti3C2TX (a member of the MXene family) was used to immobilise enzyme sarcosine oxidase to fabricate a nanostructured biosensor. The device was applied for detection of sarcosine, a potential prostate cancer biomarker, in urine for the first time. The morphology and structures of MXene have been characterised by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Electrochemical measurements, SEM and AFM analysis revealed that MXene interfaced with chitosan is an excellent support for enzyme immobilisation to fabricate a sensitive biosensor exhibiting a low detection limit of 18 nM and a linear range up to 7.8 µM. The proposed biosensing method also provides a short response time of 2 s and high recovery index of 102.6% for detection of sarcosine spiked into urine sample in a clinically relevant range.

Supply chains are complex networks that receive assiduous attention in the literature. Like any complex network, a supply chain is subject to a wide variety of risks that can result in significant economic losses and negative impacts in terms of image and prestige for companies. In circumstances of aggressive competition among companies, effective management of supply chain risks (SCRs) is crucial, and is currently a very active field of research. Failure Mode, Effects and Criticality Analysis (FMECA) has been recently extended to SCR identification and prioritization, aiming at reducing potential losses caused by lack of risk control. This article has a twofold objective. First, SCR assessment is investigated, and a comprehensive list of specific risks related to the automotive industry is compiled to extend the set of most commonly considered risks. Second, an alternative way of calculating the Risk Priority Number (RPN) is proposed within the FMECA framework by means of an integrate... [more]

Supply chain agility and sustainability is an essential element for the long-term survival and success of a manufacturing organization. Agility is an organization’s ability to respond rapidly to customers’ dynamic demands and volatile market changes. In a dynamic business environment, manufacturing firms demand agility to be evaluated to support any alarming decision. Sustainability is an aspect to sustain collaboration, value creation, and survival of firms under a dynamic competitive business scenario. Agility is a capability that drives competitiveness to foster sustainability aspects. The purpose of this article is to consider and evaluate the supply chain behavior within the context of Saudi enterprises. The efficacy and relevance of this model were explored through a case study conducted in a Saudi dairy manufacturing corporation. Owing to the complexity and a large number of calculations that are required for evaluating the agility of the supply chain, a decision support system... [more]

This paper focuses on the numerical modeling of the effect of the height of a combustion chamber on the development of a reference calorimeter whose objective is to measure the calorific value of natural gas. The impacts of temperature, velocity, and mass fraction on the exhaust gases were evaluated by varying the height of the combustion chamber. The eddy dissipation concept (EDC) approach was used to model combustion with two different chemical kinetic mechanisms: one with three steps, called the three-step mechanism defined by default in the software used, and second skeletal model, which consists of 41 steps, through the ChemKin-import file with 16 species. The main result of this study is the selection of a combustion chamber height for the reference calorimeter that produces the best performance in the combustion process, which is 70 mm, as well as the main differences in using a three-step mechanism and a skeletal model to simulate an oxy-fuel combustion reaction.

With the development of integrated modular avionics (IMA), the dynamic reconfiguration of IMA not only provides great advantages in resource utilization and aircraft configuration, but also acts as a valid means for resource failure management. It is vital to ensure the correction of the IMA dynamic reconfiguration process. The analysis of the dynamic reconfiguration process is a significant task. The Architecture Analysis & Design Language (AADL) is widely used in complicated real-time embedded systems. The language can describe the system configuration and the execution behaviors, such as configuration changes. Petri net is a widely used tool to conduct simulation analysis in many aspects. In this study, a model-based analyzing method with multiple constraints for the IMA dynamic reconfiguration process was proposed. First, several design constraints on the process were investigated. Second, the dynamic reconfiguration process was modeled based on the AADL. Then, a set of rules for t... [more]

The reverse osmosis (RO) process is one of the best desalination methods, using membranes to reject several impurities from seawater and brackish water. To systematically perceive the transport phenomena of solvent and solutes via the membrane texture, several mathematical models have been developed. To date, a large number of simulation and optimisation studies have been achieved to gauge the influence of control variables on the performance indexes, to adjust the key variables at optimum values, and to realise the optimum production indexes. This paper delivers an intensive review of the successful models of the RO process and both simulation and optimisation studies carried out on the basis of the models developed. In general, this paper investigates the scope and limitations of the RO process, as well as proving the maturity of the associated perspective methodologies.

The rambutan peel (RP) is a relevant source of bioactive molecules, which could be used for application in cosmetics, food, and pharmaceutical areas. Total soluble polyphenol content was extracted from Mexican variety rambutan peels using an emergent ultrasound/microwave-assisted extraction (U/M-AE) technology. Five extractions were performed using different mass/volume and ethanol/water ratios; 1:16-0; 1:16-70; 1:8-0; 1:8-70; 1:12-30. Condition 1:16-0 was defined as the best extraction condition with 0% ethanol percentage (only water). The content of total soluble polyphenols was 307.57 mg/g. The total bound polyphenol content was 26.53 mg/g. Besides, two separation processes were made with the soluble fraction; the first one was performed using Amberlite XAD-16 (Sigma-Aldrich, Saint Louis, MO, USA), and seven polyphenolic compounds were obtained. The second one was performed using a preparative HPLC (Varian, Palo Alto, CA, USA) equipment obtained fraction where three compounds were o... [more]

Formaldehyde is an important industrial chemical that is a strong-smelling and colorless gas. It is used in a number of processes such as making household products and building materials, glues and adhesives, resins, certain insulation materials, etc. Formaldehyde can be produced industrially using air and methanol as raw materials in the presence of metal oxide catalyst or silver-based catalyst. The operating conditions and requirements of the process depend on the type of catalyst used. Therefore, a comparative study of both processes was conducted, and the results were compared. It was observed that the silver-based catalyst process has a compact plant size since the amount of air required is halved as compared to the metal oxide process. Thus, it appears that the silver-based catalyst process is more suitable for small-scale production due to its compact size and reduced utility cost.

Slickwater hydraulic fracturing is becoming a prevalent approach to economically recovering shale hydrocarbon. It is very important to understand the proppant’s transport behavior during slickwater hydraulic fracturing treatment for effective creation of a desired propped fracture geometry. The currently available models are either oversimplified or have been performed at limited length scales to avoid high computational requirements. Another limitation is that the currently available hydraulic fracturing simulators are developed using only single-sized proppant particles. Motivated by this, in this work, a computationally efficient, three-dimensional, multiphase particle-in-cell (MP-PIC) model was employed to simulate the multi-size proppant transport in a field-scale geometry using the Eulerian−Lagrangian framework. Instead of tracking each particle, groups of particles (called parcels) are tracked, which allows one to simulate the proppant transport in field-scale geometries at an a... [more]

The oil industry is facing a major problem with the large amount of oil residue generated in the tanks that store and process crude oil or its products. Research has shown that the residues of petroleum sludge, which according to a sample from the Azzawiya oil refinery in Libya mainly consist of oil, water and solid residues in 42.8%, 2.9% and 55.2% respectively, result in the alteration of the product quality and reduced capacity of the tanks. The solution for this problem as well as the need for inspection and maintenance requires the removal of this oil sludge and the internal cleaning of the tanks. This report aims to review the applied clean-up methods available in the world market and to identify the most efficient, safest, most economical and most environmentally friendly cleaning process. It must be noted that until now, there is not any published work which presents the applied techniques. To accomplish this goal, a total of five manual, automatic and robotic cleaning systems... [more]

Election Algorithm (EA) is a novel variant of the socio-political metaheuristic algorithm, inspired by the presidential election model conducted globally. In this research, we will investigate the effect of Bipolar EA in enhancing the learning processes of a Hopfield Neural Network (HNN) to generate global solutions for Random k Satisfiability (RANkSAT) logical representation. Specifically, this paper utilizes a bipolar EA incorporated with the HNN in optimizing RANkSAT representation. The main goal of the learning processes in our study is to ensure the cost function of RANkSAT converges to zero, indicating the logic function is satisfied. The effective learning phase will affect the final states of RANkSAT and determine whether the final energy is a global minimum or local minimum. The comparison will be made by adopting the same network and logical rule with the conventional learning algorithm, namely, exhaustive search (ES) and genetic algorithm (GA), respectively. Performance eval... [more]

Accurate prediction of the discharge coefficient (CD) for internal-mixing twin-fluid (IMTF) atomizers is challenging, the effect of control factors remains inadequately understood, and comparative data on the CD of IMTF atomizers are unavailable. This work presents an experimental study on CD for different IMTF atomizers with a wide range of factors, including the gas-to-liquid ratio (GLR), the inlet-overpressure ratio (∆pmix/pamb), the orifice length-to-diameter ratio (Lo/do), and the liquid viscosity (µL). Five atomizers with different internal-mixing principles were probed on a cold test rig, including the frequently studied outside-in-gas (OIG) and inside-out-gas (IOG) effervescent types, the recently-introduced outside-in-liquid (OIL) and air-core-liquid-ring (ACLR) atomizers, and our new design named the swirling-air-core-liquid-ring (SACLR) atomizer. The results demonstrate that CD is governed mainly by GLR, and reduces if GLR, Lo/do, or µL is increased. An increase in ∆pmix/pam... [more]

Ethanol is one of the widely used liquid biofuels in the world. The move from sugar-based production into the second-generation, lignocellulosic-based production has been of interest due to an abundance of these non-edible raw materials. This study interested in the use of Napier grass (Pennisetum purpureum Schumach), a common fodder in tropical regions and is considered an energy crop, for ethanol production. In this study, we aim to evaluate the ethanol production potential from the grass and to suggest a production process based on the results obtained from the study. Pretreatments of the grass by alkali, dilute acid, and their combination prepared the grass for further hydrolysis by commercial cellulase (Cellic® CTec2). Separate hydrolysis and fermentation (SHF), and simultaneous saccharification and fermentation (SSF) techniques were investigated in ethanol production using Saccharomyces cerevisiae and Scheffersomyces shehatae, a xylose-fermenting yeast. Pretreating 15% w/v Napier... [more]

This article was aimed to solve an urgent problem of ensuring quality for prilling processes in vibrational prilling equipment. During the research, the need for the application of vibrational prilling to create a controlled impact on the process of jet decay on droplets with the proper characteristics was substantiated. Based on the experimental and theoretical studies of the process of decay of a liquid jet into drops, axisymmetric droplet oscillation modes for the different frequencies were observed. Frequency ranges of transition between modes of decay of a jet into drops were obtained. As a result, the mathematical model of the droplet deformation was refined. The experimental research data substantiated this model, and its implementation allowed determining the analytical dependencies for the components of the droplet deformation velocity. The proposed model explains the existence of different droplet oscillation modes depending on the frequency characteristics of the superimpose... [more]

A substantial part of Distributed Control Systems are SCADA systems that require connection to low level electronics through standard industrial interfaces and protocols. When implementing Distributed Control Systems for physics experiments, it is often necessary to use custom made electronics that do not have the ability to communicate using standard protocols, but instead use custom communication protocols. This paper describes the new Front End Device (FRED) framework, which provides the possibility of connecting custom electronics to standard SCADA systems, thus filling the gap in the implementation of Distributed Control Systems that deploy custom electronics. The FRED framework also serves as a translation layer, which provides translation of raw values acquired from electronics to real physical quantities and vice versa. At the same time, it is easy to use, since there is no need for additional programming when used in the simple mode, and its entire functionality can be configu... [more]

Thin film processes are significantly incorporated in manufacturing display panels, secondary batteries, fuel/solar cells, catalytic films, membranes, adhesives, and other commodity films [...]

The realization of some composite materials that allow the best removal of H2S from syngas was the main objective of this work. Thus, the optimization of the technological parameters for obtaining composites based on Zn-Ti was achieved. The paper studies the influence of calcination temperature on the characteristics of the binary ZnO-TiO2 system used to synthesize a composite material with suitable properties to be used subsequently for syngas treatment. The mineralogical and structural analyzes showed that starting with the calcination temperature of 700 °C the material synthetized is composed mainly of zinc orthotitanate which possess the corresponding characteristics to be finally used in the treatment of the syngas for its desulfurization. At this calcination temperature the material has a compact structure most likely due to sintering of the formed titanates. These composites have a texture that places them rather in the category of non-porous materials, the pore volume and their... [more]