The global climate is warming rapidly, with increasing frequency of severe events including heatwaves. Building insulation standards are improving to reduce emissions, but this can also lead to more overheating. Historically, UK house designers have not included adaptation measures to limit this. Most studies of the problem have had limited geographical or future climate scope. This study considers the comfort performance of a small modern house, in detached, semi-detached, and terrace (row) forms, but otherwise identical. Overheating is evaluated according to established criteria, including night-time bedroom hours over 26 °C. Simulations are carried out using median future weather years for current, 2030s, 2050s, and 2080s climates under medium- and high-emission scenarios for 14 regions of the UK. The results show a very large increase in overheating by the 2080s in all regions. With solar shading and natural ventilation, overheating is reduced considerably, maintaining comfort in m... [more]

The reliability of the power supply depends on the reliability of the structure of the grid. Grid networks are exposed to varying weather events, which makes them prone to faults. There is a growing concern that climate change will lead to increasing numbers and severity of weather events, which will adversely affect grid reliability and electricity supply. Predictive models of electricity reliability have been used which utilize computational intelligence techniques. These techniques have not been adequately explored in forecasting problems related to electricity outages due to weather factors. A model for predicting electricity outages caused by weather events is presented in this study. This uses the back-propagation algorithm as related to the concept of artificial neural networks (ANNs). The performance of the ANN model is evaluated using real-life data sets from Pietermaritzburg, South Africa, and compared with some conventional models. These are the exponential smoothing (ES) an... [more]

Poland’s management of municipal waste, which amounts to over 13 million tons/year, is not efficient—about 60% of the waste is subjected to recovery processes, about 20% of all municipal waste is converted into energy, and almost 40% is landfilled. The authors of this article recognize the potential of pyrolysis as a method of the thermal processing of waste allowing the potential of the energy contained in the waste to be utilized. Pyrolysis is an economically attractive alternative to incineration, with a significantly lower environmental impact, allowing efficient waste management and the use of pyrolysis by-products in the energy sector (pyrolysis gas), or in the building materials sector (biochar). Despite so many advantages, this method is not employed in Poland. The aim of the paper is to indicate a recommended strategy for the application of pyrolysis in Poland as a method of the thermal processing of municipal solid waste. SWOT (strengths, weaknesses, opportunities, threats) a... [more]

The high penetration of renewable energy sources, coupled with decommissioning of conventional power plants, leads to the reduction of power system inertia. This has negative repercussions on the transient stability of power systems. The purpose of this paper is to review the state-of-the-art regarding the application of artificial intelligence to the power system transient stability assessment, with a focus on different machine, deep, and reinforcement learning techniques. The review covers data generation processes (from measurements and simulations), data processing pipelines (features engineering, splitting strategy, dimensionality reduction), model building and training (including ensembles and hyperparameter optimization techniques), deployment, and management (with monitoring for detecting bias and drift). The review focuses, in particular, on different deep learning models that show promising results on standard benchmark test cases. The final aim of the review is to point out... [more]

This paper presents the methodology for conducting a cost-optimal energy performance calculation of a solar hot water system, used for space heating and domestic hot water needs. The calculation is based on dynamic hourly methods, according to the new Energy Performance of Buildings’ (EPB) set of standards EN 15316:2017, and a revision of the standard EN 15316-5:2017 from the year 2021, dealing with storage-tank water temperature calculations. The paper provides proposals for modifications to these newly introduced standards, in order to overcome the observed ambiguities and shortcomings. The calculation of annual energy performance of a building was performed on an hourly basis over a year for the reference of an nZEB multi-apartment building, for a climate area of the city of Zagreb, taking into account water temperature change in the layers of the storage tank connected to solar collectors and hot water boilers. The cost-optimal solution was then determined by varying individual par... [more]

Detection of partial discharge (PD) in switchgears requires extensive data collection and time-consuming analyses. Data from real live operational environments pose great challenges in the development of robust and efficient detection algorithms due to overlapping PDs and the strong presence of random white noise. This paper presents a novel approach using clustering for data cleaning and feature extraction of phase-resolved partial discharge (PRPD) plots derived from live operational data. A total of 452 PRPD 2D plots collected from distribution substations over a six-month period were used to test the proposed technique. The output of the clustering technique is evaluated on different types of machine learning classification techniques and the accuracy is compared using balanced accuracy score. The proposed technique extends the measurement abilities of a portable PD measurement tool for diagnostics of switchgear condition, helping utilities to quickly detect potential PD activities... [more]

This article addresses reliability under the sweat of interconnection techniques for the mounting surface mounted device (SMD) components and fully printed humidity sensors onto conductive stretchable textile ribbons. Samples underwent testing for the effect of ageing by artificial sweat on their electrical resistance using both alkaline and acidic artificial sweat. The best results in terms of electrical resistance change were obtained for samples soldered to the conductive fibers interwoven in the ribbon. However, this method can damage the ribbon due to the high temperature during soldering and significantly reduce the mechanical properties and flexibility of the ribbon, which can lead to a limited service life of samples. On the other hand, adhesive bonding is a very interesting alternative, where the above-mentioned properties are preserved, but there is a significant effect of sweat ageing on electrical resistance. The results of fully printed graphene-based humidity sensors show... [more]

The reliance on Computational Fluid Dynamics (CFD) simulations has drastically increased over time to evaluate the aerodynamic performance of small-scale wind turbines. With the rapid variability in customer demand, industrial requirements, economic constraints, and time limitations associated with the design and development of small-scale wind turbines, the trade-off between computational resources and the simulation’s numerical accuracy may vary significantly. In the context of wind turbine design and analysis, high fidelity simulation under full geometric and numerical complexity is more accurate but pose significant demands from a computational standpoint. There is a need to understand and quantify performance deterioration of high fidelity simulations under reduced geometric or numerical approximation on a single small scale turbine model. In the present work, the flow past a small-scale Horizontal Axis Wind Turbine (HAWT) was simulated under various geometric and numerical config... [more]

Offshore wind farms are a rapidly developing source of clean, low-carbon energy and as they continue to grow in scale and capacity, so does the requirement for their efficient and optimised operation and maintenance. Historically, approaches to maintenance have been purely reactive. However, there is a movement in offshore wind, and wider industry in general, towards more proactive, condition-based maintenance approaches which rely on operational data-driven decision making. This paper reviews the current efforts in proactive maintenance strategies, both predictive and prescriptive, of which the latter is an evolution of the former. Both use operational data to determine whether a turbine component will fail in order to provide sufficient warning to carry out necessary maintenance. Prescriptive strategies also provide optimised maintenance actions, incorporating predictions into a wider maintenance plan to address predicted failure modes. Beginning with a summary of common techniques u... [more]

This paper presents an accurate quasi-analytical approximation of frequency-dependent ac resistance of single rectangular conductors. In this work, first, a two-dimensional analytical ac resistance of rectangular conductors is derived. Unlike circular conductors, where current density distributes evenly in each layer of the conductor’s cross-section, the edge effect is involved for rectangular conductors. Due to the edge effect, one cannot define an accurate boundary condition for solving the two-dimensional partial differential equation of magnetic field or current density of rectangular conductors. Hence, the calculated two-dimensional analytical current density result is not accurate and is modified and fitted on FEM simulation, taking the conductor’s thickness into account using the least-square problem to improve its accuracy. Unlike numerical approaches, the proposed method yields an easy-to-use formula applicable to industrial applications in different fields. Contrary to the on... [more]

This article is dedicated to providing a detailed review concerning the SPH-based hydrodynamic simulations for ocean energy devices (OEDs). Attention is particularly focused on three topics that are tightly related to the concerning field, covering (1) SPH-based numerical fluid tanks, (2) multi-physics SPH techniques towards simulating OEDs, and finally (3) computational efficiency and capacity. In addition, the striking challenges of the SPH method with respect to simulating OEDs are elaborated, and the future prospects of the SPH method for the concerning topics are also provided.

This article is devoted to the definition of the most important combinations of objects in critical network infrastructures. This study was carried out using the example of the Russian gas transmission network. Since natural gas is widely used in the energy sector, the gas transmission network can be exposed to terrorist threats, and the actions of intruders can be directed at both gas fields and gas pipelines. A defender−attacker model was proposed to simulate attacks. In this model, the defender solves the maximum flow problem to satisfy the needs of gas consumers. By excluding gas pipelines, the attacker tries to minimize the maximum flow in the gas transmission network. Russian and European gas transmission networks are territorially very extensive and have a significant number of mutual intersections and redundant pipelines. Therefore, one of the approaches to inflicting maximum damage on the system is modeled as an attack on a clique. A clique in this study is several interconnec... [more]

This study proposed a new suction bucket (SB) foundation model for offshore wind turbines (OWT) suitable for a shallow muddy seabed, using more than three single buckets through kinetic derivation. The performance of new optimal foundation was evaluated by its horizontal displacement capacity and compared with a conventional SB composed of three buckets. Under external loads such as earthquakes, wind, and the combination of the both, the stability of this novel SB foundation was verified. The seismic fragility curve was also evaluated at some scour depths. These results were compared with the response of a tripod suction bucket (TSB) foundation, which was also designed for a shallow muddy seabed. The results indicated that scour significantly changed the dynamic response of this novel SB foundation but it had a better bearing capacity than the TSB foundation, despite its smaller size and weight. The fragility of TSB is always higher than the developed foundation in the same environment... [more]

This review uses a more holistic approach to provide comprehensive information and up-to-date knowledge on solar energy development in India and scientific and technological advancement. This review describes the types of solar photovoltaic (PV) systems, existing solar technologies, and the structure of PV systems. Substantial emphasis has been given to understanding the potential impacts of COVID-19 on the solar energy installed capacity. In addition, we evaluated the prospects of solar energy and the revival of growth in solar energy installation post-COVID-19. Further, we described the challenges caused by transitions and cloud enhancement on smaller and larger PV systems on the solar power amended grid-system. While the review is focused on evaluating the solar energy growth in India, we used a broader approach to compare the existing solar technologies available across the world. The need for recycling waste from solar energy systems has been emphasized. Improved PV cell efficienc... [more]

Power markets are becoming increasingly complex as they move towards (i) integrating higher amounts of variable renewable energy, (ii) shorter trading intervals and lead times, (iii) stronger interdependencies between related markets, and (iv) increasing energy system integration. For designing them appropriately, an enhanced understanding of the dynamics in interrelated short-term physical power and energy markets is required, which can be supported by market simulations. In this paper, we present an agent-based power market simulation model with rule-based bidding strategies that addresses the above-mentioned challenges, and represents market participants individually with a high level of technical detail. By allowing agents to participate in several interrelated markets, such as the energy-only market, a procurement platform for control reserve and a local heat market representing district heating systems, cross-market opportunity costs are well reflected. With this approach, we wer... [more]

In the present study, the evaluation of potential improvement of the overall efficiency of a common PV panel, valorizing the heat extracted by a heat exchanger that is integrated on its back side, either into work using an endoreversible Carnot engine or into cold by using an endoreversible tri-thermal machine consisting of a heat-driven refrigeration machine operating between three temperature sources and sink (such as a liquid/gas absorption machine), was carried out. A simplified thermodynamic analysis of the PV/thermal collector shows that there are two optimal operating temperatures T˜h and Th* of the panels, which maximize either the thermal exergy or the overall exergy of the PV panel, respectively. The cold produced by the endoreversible tri-thermal machine during the operating conditions of the PV/thermal collector at T˜h is higher with a coefficient of performance (COP) of 0.24 thanks to the higher heat recovery potential. In the case of using the cold produced by a tri-therm... [more]

Countries with limited natural resources and high energy prices, such as Jordan, face significant challenges concerning energy consumption and energy efficiency, particularly in the context of climate change. Residential buildings are the most energy-consuming sector in Jordan. Photovoltaic (PV) systems on the rooftops of residential buildings can solve the problem of increasing electricity demands and address the need for more sustainable energy systems. This study calculated the potential electricity production from PV systems installed on the available rooftops of residential buildings and compared this production with current and future electricity consumption for residential households. A simulation tool using PV*SOL 2021 was used to estimate electricity production and a comparative method was used to compare electricity production and consumption. The results indicated that electricity production from PV systems installed on single houses and villas can cover, depending on the ti... [more]

The paper presents the reactive power compensation method that allows for reducing the active power flow even in the presence of angular asymmetry between voltage vectors of the utility grid. Reactive power compensation ensures the reduction of power transmission losses and therefore brings significant economic benefits to electricity consumers. The concept of the alternating current/direct current (AC/DC) converter for prosumer applications operating as a local reactive power compensator has been proposed. The system is driven by a multi-resonant algorithm, allowing for independent control of the reactive power in each phase. The proposed method was validated experimentally by using a prototype of the converter, programmable AC source, and grid impedance model. The method made it possible to cover the reactive power demand without unnecessary active power generation and thus to improve the efficiency of the analyzed prototype. This solution can be implemented particularly in radial gr... [more]

Globally, lignocellulosic biomass has great potential for industrial production of materials and products, but this resource must be used in an environmentally friendly, socially acceptable and sustainable manner. Wood and agricultural residues such as walnut shells as lignocellulosic biomass are one of the most affordable and important renewable resources in the world, which can partially replace fossil resources. The overall objective of the research is to provide background information that supports new applications of walnut shells in a biorefinery context and to increase the economic value of these non-wood forest products. This paper presents the properties characterization of liquefied biomass according to their chemical composition. All results were compared to liquefied wood. In this study, the liquefaction properties of five different walnut shell particle sizes were determined using glycerol as the liquefaction reagent under defined reaction conditions. The liquefied biomass... [more]

The article presents the negative aspects of the influence of static and dynamic acceleration on the accuracy of pressure measurement for a selected type of transmitter. The influence of static accelerations from catalog notes was shown and compared with the tests results for a few selected sensors. The results of research on the influence of dynamic acceleration for various types of its variability for selected converters are presented. Moreover, a method of measurement patented by the authors that uses a complex transducer is shown. The method allows for more accurate measurements on moving objects. The tests were performed based on the proposed method. The obtained results of the influence of acceleration on the classical sensor as well as the construction using the proposed method are shown. The paper presents approximate pressure measurement errors resulting from the influence of acceleration. For example, errors in measuring the speed of an airplane may occur without the proposed... [more]

Changes in modern technologies have led to a decrease in the role of oil and threaten the well-being of oil-exporting countries. The oil and gas industry is the leading one in the economy of Kazakhstan, and the future of the country depends on its development. The purpose of the presented research is to determine the long-term image of the future oil and gas industry and develop a strategy for the government and national companies in different spheres for actions in conditions of increasing uncertainty. The article presents the materials of an expert survey using the Delphi method (211 industry experts) and a group discussion during a foresight session (75 participants), in which the authors provided methodological support and practical participation. The top nine development trends have been identified, the majority of experts (about 90%) see the future of the industry as the development of unmanned production based on digital management and an increase in environmental requirements (... [more]

Anaerobic co-digestion (AcoD) has been practiced for decades to convert waste into value-added energy products, especially biogas. This study aimed to assess the potential of biogenic methane (CH4) production from the co-digestion of pretreated cotton gin trash (CGT), cow manure, and sludge. CGT contains high cellulosic content, making it a reliable feedstock for biogenic methane production. To further improve the biogas quantity and quality, the CGT was subjected to physical pretreatments, i.e., hot water (HW), ultra-sonication (US), and a combination of both (HW+US). After 91 days of AcoD, 79−110 L of biogas was produced by the treatments. Among the treatments, HW+US-pretreated CGT presented maximum biogas production capacity, at 110 L. Besides, this treatment showed the high-quality biogenic CH4 content, 52.4% of the total biogas volume, with an improved conversion rate of 0.37 L/g of volatile suspended solids consumed. In addition, this study discussed the structural changes in fee... [more]

This study focuses on management ways within a city multi-floor manufacturing cluster (MFMC). The application of MFMC in megapolises is closely related to the problem of urban spatial development and the problem of matching transport and logistics services. The operation of the MFMC depends on the efficiency of production and transport management considering technical, economic, end environmental factors. Therefore, conditions affecting decision-making in the field of production planning by MFMCs and accompanying transports within the agglomeration area with the use of the production-service platform were presented. Assumptions were created for the decision model, allowing for the selection of partners within the MFMC to execute the production order. A simplified decision model using the Hungarian algorithm was proposed, which was verified with the use of test data. The model is universal for material flow analysis and is an assessments basis for smart sustainable supply chain decision... [more]

Accurate short-term load forecasting can ensure the safe operation of the grid. Decomposing load data into smooth components by decomposition algorithms is a common approach to address data volatility. However, each component of the decomposition must be modeled separately for prediction, which leads to overly complex models. To solve this problem, a VMD-WSLSTM load prediction model based on Shapley values is proposed in this paper. First, the Shapley value is used to select the optimal set of special features, and then the VMD decomposition method is used to decompose the original load into several smooth components. Finally, WSLSTM is used to predict each component. Unlike the traditional LSTM model, WSLSTM can simplify the prediction model and extract common features among the components by sharing the parameters among the components. In order to verify the effectiveness of the proposed model, several control groups were used for experiments. The results show that the proposed metho... [more]

A synthetic review of the application of multi-objective optimization models to the design of climate-responsive buildings and neighbourhoods is carried out. The review focused on the software utilized during both simulation and optimization stages, as well as on the objective functions and the design variables. The hereby work aims at identifying knowledge gaps and future trends in the research field of automation in the design of buildings. Around 140 scientific journal articles, published between 2014 and 2021, were selected from Scopus and Web of Science databases. A three-step selection process was applied to refine the search terms and to discard works investigating mechanical, structural, and seismic topics. Meta-analysis of the results highlighted that multi-objective optimization models are widely exploited for (i) enhancing building’s energy efficiency, (ii) improving thermal and (iii) visual comfort, minimizing (iv) life-cycle costs, and (v) emissions. Reviewed workflows dem... [more]