Thermochemical hydrogen production is of great interest due to the potential for significantly reducing the dependence on fossil fuels as energy carriers. In a solar plant, the solar receiver is the unit in which solar energy is absorbed by a fluid and/or solid particles and converted into thermal energy. When the solar energy is used to drive a reaction, the receiver is also a reactor. The wide variety of thermochemical processes, and therefore of operating conditions, along with the technical requirements of coupling the receiver with the concentrating system have led to the development of numerous reactor configurations. The scope of this work is to identify general guidelines for the design of solar reactors/receivers. To do so, an overview is initially presented of solar receiver/reactor designs proposed in the literature for different applications. The main challenges of modeling these systems are then outlined. Finally, selected examples are discussed in greater detail to highli... [more]

Developing circular value chains for continuing the use of and reducing the waste of the resources of industrial processing would eliminate impairments to the environment. The generation of nutrient-dense byproducts and coproducts with high-moisture contents are considered to be an issue for global food industries. These byproducts and coproducts spontaneously undergo chemical, biochemical, or microbial deteriorations due to high storage-temperatures, and consequently are turned into direct animal feed sources or even just treated as waste with eutrophication activity. This review provides an overview of selected mass-produced botanical food byproducts and coproducts (BFBC) including soybean okara, wheat germ, banana, and spent coffee grounds, with respect to value-added sustainable processing via proper drying technologies being employed. This review includes the current production of the above-mentioned agricultural products, the nutritional aspects of them, and the sustainable utili... [more]

The area of the contact surface of phases is one of the main hydrodynamic indicators determining the separation and heat and mass transfer equipment calculations. Methods of evaluating this indicator in the separation of multicomponent two-phase systems were considered. It was established that the existing methods for determining the interfacial surface are empirical ones, therefore limited in their applications. Consequently, the use of the corresponding approaches is appropriate for certain technological equipment only. Due to the abovementioned reasons, the universal analytical formula for determining the interfacial surface was developed. The approach is based on both the deterministic and probabilistic mathematical models. The methodology was approved on the example of separation of two-phase systems considering the different fractional distribution of dispersed particles. It was proved that the area of the contact surface with an accuracy to a dimensionless ratio depends on the v... [more]

A new member of sodium metal diphosphate-diarsenate, Na2CuP1.5As0.5O7, was synthesized as polycrystalline powder by a solid-state route. X-ray diffraction followed by Rietveld refinement show that the studied material, isostructural with β-Na2CuP2O7, crystallizes in the monoclinic system of the C2/c space group with the unit cell parameters a = 14.798(2) Å; b = 5.729(3) Å; c = 8.075(2) Å; β = 115.00(3)°. The structure of the studied material is formed by Cu2P4O15 groups connected via oxygen atoms that results in infinite chains, wavy saw-toothed along the [001] direction, with Na+ ions located in the inter-chain space. Thermal study using DSC analysis shows that the studied material is stable up to the melting point at 688 °C. The electrical investigation, using impedance spectroscopy in the 260−380 °C temperature range, shows that the Na2CuP1.5As0.5O7 compound is a fast-ion conductor with σ350 °C = 2.28 10−5 Scm−1 and Ea = 0.6 eV. Na+ ions pathways simulation using bond-valence site e... [more]

Hydrogels from natural polymers such as sodium alginate have great potential in regenerative medicine because of their biocompatibility, biodegradability, mechanical properties, bioresorption ability, and relatively low cost. Sodium alginate, a polysaccharide derived from brown seaweed, is the most widely investigated and used biomaterial in biomedical applications. Alginate dressings are also useful as a delivery platform in order to provide a controlled release of therapeutic substances (e.g., pain-relieving, antibacterial, and anti-inflammatory agents). In our work, we aimed to analyze process of degradation of alginate hydrogels. We also describe an original hybrid crosslinking process by using not one, as usual, but a mixture of two crosslinking agents (calcium chloride and barium chloride). We proved that different crosslinking agents allow producing hydrogels with a spectrum of mechanical properties, similar to the urethra tissue. Hydrogels were formed using a dip-coating techni... [more]

The purpose of this study is to optimize the processing conditions (temperature, pressure, process time, yield rate) for the conversion of biomass to a high-energy density biofuel. The hydrothermal polymerization (HTP) catalytic process has been developed for production of biofuel via hydrothermal processing using an acid-based catalyst. This study has shown that the HTP catalytic process for a reference feedstock lowered the temperature by 10 to 40 °C, reduced the pressure requirement by 1 to 2 MPa, increased the rate of yield by 22%, and shortened the total processing time by up to 3 h when compared to the conventional hydrothermal carbonization (HTC) process. FTIR spectrum analysis of the HTP catalytic biofuel has shown that lignin in the biomass is preserved, while the pure HTC process destroyed the lignin in the biomass. GC/MS analysis of the process liquid determined the changes of the intermediate soluble components as a function of time. By measuring the 2,5-hydroxymethyl furfu... [more]

Based on computational fluid dynamics (CFD) and Realizable k-ε turbulence model, we established a numerical simulation method for wind and vapor-concentration fields of various external floating-roof tanks (EFRTs) (single, two, and four) and verified its feasibility using wind-tunnel experiments. Subsequently, we analysed superposition effects of wind speed and concentration fields for different types of EFRTs. The results show that high concentrations of vapor are found near the rim gap of the floating deck and above the floating deck surface. At different ambient wind speeds, interference between tanks is different. When the ambient wind speed is greater than 2 m/s, vapor concentration in leeward area of the rear tank is greater than that between two tanks, which makes it easy to reach explosion limit. It is suggested that more monitoring should be conducted near the bottom area of the rear tank and upper area on the left of the floating deck. Superposition in a downwind direction fr... [more]

Salacia oblonga is used to treat diabetes, hypocholesteremia, gonorrhea, rheumatism, asthma, inflammation, oxidative stress, etc. In the present study, the antidiabetic activity of S. oblonga methanolic root extracts collected from three geographical locations, viz., Eleshwaram (Andhra Pradesh), Thoothukudi (Tamil Nadu), and Karwar (Karnataka), was studied in vitro. Among the three extracts, S. oblonga root extracts from Eleshwaram showed maximum α-glucosidase and α-amylase inhibitory activities, indicating better antidiabetic activity. Acute toxicity studies of S. oblonga carried out in Albino Wistar rats showed no toxicity. Further, in vivo studies showed antidiabetic and antilipidemic activities in Albino Wistar rats with induced type II diabetes mellitus. Type II diabetes mellitus was induced in the experimental rats by intraperitoneal injection of nicotinamide and streptozotocin. The rats were orally fed different doses (ranging from 0 to 400 mg/kg body weight) of S. oblonga root... [more]

Supplier development constitutes one of the current tools to enhance supply chain performance. While most literature in this context focuses on the relationship between manufacturers and suppliers, supplier development also provides an opportunity for distinct manufacturers to collaborate in enhancing a joint supplier. This article proposes a model for the optimization of such joint supplier development programs, which incorporates the effects of trust in the manufacturer-to-manufacturer relationship. This article uses a model-predictive formulation to obtain optimal supplier development investment decisions to consider the strong dynamics of the markets. Thereby, the model is designed to be highly customizable to the needs and requirements of different companies. We analyzed the price development related to Mercedes’ A-Class cars and the cost development in the automotive sector over the last ten years in Germany. According to the obtained result, the proposed model shows a sensible b... [more]

The aim of this study was to investigate and evaluate the composting potential of fruit and vegetable waste with sawdust in different combinations and to establish the relationship between microorganisms and physico-chemical parameters. Three samples were made with the C/N ratios of 50 (sample 1), 45 (sample 2), and 30 (sample 3) by adding fruit waste (apple, banana, orange, and kiwi peels) and vegetable waste (cabbage leaves, potato and carrot peels). The total amount of fruit and vegetable waste was approximately 2 kg in each sample to which different quantities of sawdust were added (1.23, 0.14, and 0.203 kg) in order to obtain the C/N ratios proposed and to limit the odor. Composting process was monitored over 70 days, while physico-chemical and microbiological analyses were performed. Results showed that in the first week pH is acidic and electrical conductivity values are high for all three samples, and then the pH values increase during the composting process, while electrical c... [more]

This research investigates the simultaneous sintering and surface nitriding of 316L stainless steel alloy using powder metallurgy method. The influence of sintering temperature and dwell time are investigated for maximum nitrogen absorption, densification and increased microhardness using response surface methodology (RSM). In this study, 316L stainless steel powder was compacted at 800 MPa and sintered at two different temperatures of 1150 and 1200 °C with varying dwell times of 1, 3, 5 and 8 h in nitrogen atmosphere. The sintered compacts were then characterized for their microstructure, densification, microhardness and nitrogen absorption. The results revealed that increased dwell time assisted nitrogen to diffuse into stainless steel matrix along with the creation of nitride layer onto the sample surface. The microhardness and density also increased with increasing dwell time. A densification of 7.575 g/cm3 and microhardness of 235 HV were obtained for the samples sintered at 1200... [more]

In order to solve the problem of the poor oil displacement effect of high molecular weight alkali/surfactant/polymer (ASP) solution in low permeability reservoirs, Daqing Oilfield uses a partial quality tool to improve the oil displacement effect in low permeability reservoirs. In the formation, the partial quality tool degrades the polymer through active shearing action, reducing the molecular weight of the polymer, to improve the matching degree to the low permeability oil layer and the oil recovery. In order to study the ability of the partial quality tool to improve the oil displacement effect, the matching degree of high molecular weight ASP solution to low permeability cores is studied, and the ability of quality control tools to change the molecular weight is studied. Then, experimental research on the pressure and oil displacement effect of high molecular weight ASP solution before and after the actions of the partial quality tool is carried out. The results show that ASP solut... [more]

The risks associated with dust explosions still exist in industries that either process or handle combustible dust. This explosion risk could be prevented or mitigated by applying the principle of inherent safety. One effective principle is to add an inert material to a highly combustible material in order to decrease its ignition sensitivity. This paper deals with an experimental investigation of the influence of inert dust on the minimum ignition temperature and the minimum explosion energy of combustible dust. The experiments detailed here were performed in a Godbert−Greenwald (GG) furnace and a 1.2 L Hartmann tube. The combustible dust (polyethylene—PE; 800 mesh) and four inert powders (NaHCO3, Na2C2O4, KHCO3, and K2C2O4) were used. The suppression effects of the four inert powders on the minimum ignition temperature and the minimum explosion energy of the PE dust have been evaluated and compared with each other. The results show that all of the four different inert dusts have an e... [more]

The back-propagation (BP) algorithm is usually used to train convolutional neural networks (CNNs) and has made greater progress in image classification. It updates weights with the gradient descent, and the farther the sample is from the target, the greater the contribution of it to the weight change. However, the influence of samples classified correctly but that are close to the classification boundary is diminished. This paper defines the classification confidence as the degree to which a sample belongs to its correct category, and divides samples of each category into dangerous and safe according to a dynamic classification confidence threshold. Then a new learning algorithm is presented to penalize the loss function with danger samples but not all samples to enable CNN to pay more attention to danger samples and to learn effective information more accurately. The experiment results, carried out on the MNIST dataset and three sub-datasets of CIFAR-10, showed that for the MNIST data... [more]

In a microgrid, grid-connected inverters, as the interface between the distributed power supply and grid, cannot provide inertia support for the system. The control strategy of virtual synchronous generator (VSG) based on grid-connected inverters can enhance the stability of system frequency. In order to make the frequency response that has a smaller overshoot and a shorter settling time, a self-adaptive damping control strategy based on the relationship between the damping and the maximum frequency deviation for microgrid VSG is presented. The small-signal mathematical model of VSG is established, and the range of the damping coefficient is determined. Finally, simulation experiments are carried out with MATLAB/Simulink, and the effectiveness of the proposed control strategy is verified by comparing it with various damping control methods.

Silver nanodecahedrons were successfully synthesized by a photochemical method under irradiation of blue light-emitting diodes (LEDs). The formation of silver nanodecahedrons at different LED irradiation times (0−72 h) was thoroughly investigated by employing different characterization methods such as ultraviolet−visible spectroscopy (UV−Vis), transmission electron microscopy (TEM), and Raman spectroscopy. The results showed that silver nanodecahedrons (AgNDs) were formed from silver nanoseeds after 6 h of LED irradiation. The surface-enhanced Raman scattering (SERS) effects of the synthesized AgNDs were also studied in comparison with those of spherical silver nanoparticles in the detection of 4-mercapto benzoic acid. Silver nanodecahedrons with a size of 48 nm formed after 48 h of LED irradiation displayed stronger SERS properties than spherical nanoparticles because of electromagnetic enhancement. The formation mechanism of silver nanodecahedrons is also reported in our study. The r... [more]

In this paper, the cavitation characteristics of centrifugal blood pumps under variable speeds were studied by using ANSYS-CFX and MATLAB software. The study proposed a multi-scale model of the “centrifugal blood pump—left heart blood circulation”, and analyzed the cavitation characteristics of the centrifugal blood pump. The results showed that the cavitation in the impeller first appeared near the hub at the inlet of the impeller. As the inlet pressure decreased, the cavitation gradually strengthened and the bubbles gradually developed in the outlet of the impeller. The cavitation intensity increased with the increase of impeller speed. The curve of the variable speeds of the centrifugal blood pump in the optimal auxiliary state was obtained, which could effectively improve the aortic pressure and flow. In variable speeds, due to the high aortic flow and pressure during the ejection period, the sharp increases in speeds led to cavitation. The results could provide a guidance for the... [more]

Natural gas (NG) production in Brazil has shown a significant increase in recent years. Oil and natural gas exploration and refining activities indicate circa 86% carbon dioxide content in NG, representing a serious problem for environmental issues related to greenhouse gas emissions and increases in global warming. New technologies using CO2 capture materials have been shown to be more efficient than conventional processes. In this work, a bimodal meso−macroporous silica adsorbent for CO2 adsorption in NG was synthesized and evaluated as a promising material for use in natural gas treatment systems, as silica has specific textural properties that facilitate the capture and storage of this gas. The adsorbent was obtained from silica via the hydrothermal method with n-dodecane emulsion and characterized by X-ray diffraction, scanning electron microscopy, infrared spectroscopy, and the BET specific surface area. Adsorption capacity tests were performed for CO2, methane, and their mixture... [more]

The Integrated Gasification Combined Cycle (IGCC) possesses a number of advantages over traditional power generation plants, including increased efficiency, flex-fuel, and carbon capture. A lesser-known advantage of the IGCC system is the ability to coordinate with the smart grid. The idea is that process modifications can enable dispatch capabilities in the sense of shifting power production away from periods of low electricity price to periods of high price and thus generate greater revenue. The work begins with a demonstration of Economic Model Predictive Control (EMPC) as a strategy to determine the dispatch policy by directly pursuing the objective of maximizing plant revenue. However, the numeric nature of EMPC creates an inherent limitation when it comes to process design. Thus, Economic Linear Optimal Control (ELOC) is proposed as a surrogate for EMPC in the formulation of the integrated design and control problem for IGCC power plants with smart grid coordination.

Sustainable production process improvement is very important for all enterprises as its implementation can help them to achieve development plans, scheduling, and reduce costs and pollution [...]

In this study, maleic anhydride (MA) grafted natural rubber (NR), known as maleated natural rubber (MNR), was melt-prepared with the MA content varied within 1−8 phr. MNR was used as the main matrix, with Halloysite Nanotubes (HNT) as a filler, in order to obtain composites with improved performance. The compounds were investigated for their filler−filler interactions by considering their Payne effect. On increasing the MA content, scorch and cure times increased along with maximum torque and torque difference. The MNR with 4 phr of MA exhibited the least filler−filler interactions, as indicated by the retention of the storage modulus after applying a large strain to the filled compound. This MNR compound also provided the highest tensile strength among the cases tested. It is interesting to highlight that MNR, with an appropriate MA content, reduces filler−filler interactions, and, thereby, enhances the HNT filler dispersion, as verified by SEM images, leading to improved mechanical a... [more]

The present work is a computational investigation of nanofluid and hybrid nanofluid transport in a periodic structure. The governing equations for this work along with the appropriate boundary conditions are solved using the finite-volume method. The simulations are carried out using five wavy amplitudes of the channel shape for a range of Reynolds numbers from 102 to103. It is found that increasing the amplitude and increasing the nanoparticle volume fraction achieve enhancement of the heat transfer at the cost of increased pumping power. Correlations for the friction factor and the Nusselt number for both fluid types are provided.

From the perspective of resource recovery and environmental protection, coal gangue-fly ash cemented backfill coal mining has become an important direction for the green development of coal mines in recent years. Analysis of the rheological parameters of backfill slurry is the basic principle to design a backfill pipeline system. Coal gangue-fly ash backfill slurry has a mass concentration of 76% to 79% and a maximum particle size 20 mm. Therefore, it is difficult to use conventional rheometers for experimental analyses of the rheological parameters of such fluids. We developed a rheometer for high-concentration coal gangue backfill slurry (HCGS rheometer) based on the coal gangue-fly ash backfill practice of Gonggeying Mine, and analyzed the rheological properties of the backfill slurry. The experimental results showed that the Reynolds number of the coal gangue-fly ash backfill slurry was much smaller than the critical Reynolds number, indicating the flow state in the pipeline was la... [more]

The industry is generally preoccupied with the evolution towards Industry 4.0 principles and the associated advantages as cost reduction, respectively safety, availability, and productivity increase. So far, it is not completely clear how to reach these advantages and what their exact representation or impact is. It is necessary for industrial systems, even legacy ones, to assure interoperability in the context of chronologically dispersed and currently functional solutions, respectively; the Open Platform Communications Unified Architecture (OPC UA) protocol is an essential requirement. Then, following data accumulation, the resulting process-aware strategies have to present learning capabilities, pattern identification, and conclusions to increase efficiency or safety. Finally, model-based analysis and decision and control procedures applied in a non-invasive manner over functioning systems close the optimizing loop. Drinking water facilities, as generally the entire water sector, ar... [more]

Exploring new sources of polyphenols with biological activities that work against human diseases is the target of natural product studies. This study determined the polyphenol composition of the bark of Malus species M. baccata var. gracilis (Rehder) T.C.Ku and M. toringoides (Rehder) Hughes, using high-performance liquid chromatography with a diode-array detector (HPLC-DAD) analysis. The antiproliferative, cytotoxic, antioxidant and antimicrobial applications of these extracts, as well as the identified phenol, were studied. The HPLC-DAD analysis confirmed three polyphenols in the extracts out of the 21 screened compounds: protocatechuic acid, gallic acid, and catechin. The major constituents in M. baccata and M. toringoides were protocatechuic acid, at 3.16 and 7.15 mg 100 g−1 dry weight (DW), respectively, and catechin, at 5.55 and 6.80 mg 100 g−1 DW, respectively. M. baccata and M. toringoides bark extracts showed antioxidant activities using 2,2-diphenyl-1-picrylhydrazyl (DPPH), β... [more]