Genetically modified (GM) crops expressing insecticidal and herbicide-tolerant traits provide a new approach to agriculture production, but concerns about food safety were often raised by the public. The present research shows the findings of the nutritional assessment of ZDAB3 expressing insecticidal Cry proteins (Cry1Ab and Cry2Ab) and EPSPS protein (G10evo-EPSPS). The key nutrients and anti-nutrients of ZDAB3 maize were examined and contrasted with those of its non-transgenic control maize grown at the same locations during three planting seasons. The values for proximates, amino acids, fatty acids, minerals, vitamins, phytic acid, and trypsin inhibitor assessed for ZDAB3 were comparable to those of its non-transgenic control maize or within the range of values reported for other commercial lines. In addition, no adverse effects related to the G10evo-EPSPS protein in mammals were observed. These data indicated that the expression of Cry1Ab, Cry2Ab, and G10evo-EPSPS proteins in ZDAB3... [more]

For the purpose of studying compact strip production (CSP) funnel-shaped mold and flexible thin-slab rolling (FTSR) funnel-shaped mold, a three-dimensional (3D) multi-field coupling mathematical model was established to describe the electromagnetic braking (EMBr) continuous casting process. To investigate the metallurgical effect of EMBr in the CSP and FTSR funnel-shaped thin-slab molds, a Reynolds-averaged Navier−Stokes (RANS) turbulence model, together with an enthalpy−porosity approach, was established to numerically simulate the effect of ruler EMBr on the behaviors of melt flow, heat transfer, solidification, and inclusion movement in high-speed casting. The simulation results indicate that the application of ruler EMBr in the CSP and FTSR molds shows great potential to improve the surface temperature of molten steel and reduce the penetration depth of downward backflow. This contributes to the melting of the slag rim near the meniscus region and facilitates the floating removal o... [more]

Several studies have already demonstrated that electrospinning is an excellent tool for forming nano/microfibers. However, the number of parameters affecting the formation of the structures has become a great challenge, including the polymeric solutions’ rheological properties, directly affecting the morphology of the fibers formed. The present work aimed to produce polymeric composites and determine their rheological properties, comparing them to the morphology of the fibers formed by electrospinning. Also, to evaluate their potential use as the carriers of natural pigments. To this end, a distinct combination of solutions containing Chitosan/Gelatin, Chitosan/poly(ethylene) oxide (PEO) and Zein/PEO was produced and submitted to electrospinning. The sample containing zein manufactured the structures smaller in diameter (201.3 ± 58.6 nm) among those studied. Besides, it was observed that adding PEO to the solutions impacts the increase in viscosity and shear thinning behavior, guarante... [more]

The preparation and application of ultra-clean coal is one of the important aspects of clean energy technology. However, the preparation of ultra-clean coal is mainly chemical methods, which are low in efficiency, high in energy consumption and expensive. It is urgent to find an effective method to prepare ultra-clean coal. In this paper, the combined method of grinding and the collector gasification flotation method was used to obtain ultra-clean coal. The effects of grinding time on the particle size composition, mineral dissociation, surface properties and flotation results of coal samples were studied. The grinding test results show that with the increase in grinding time, the particle size and the pore diameter of coal samples decreased gradually, while the specific surface area and pore volume of coal samples gradually increased. When the grinding time was 20 min, the D90 and D[4,3] of grinding products were 5.20 um and 4.23 um, respectively. The ash content of −1.3 g/cm3 was les... [more]

Recent environmental concern has been raised about the development of biocomposites because of their low cost, eco-friendliness, and biodegradability. Machining of polymeric composite is inevitable during assembly of structural components. In view of creating holes in structural composites, drilling is necessary and it is essential to carry out research to find the optimal machining parameters. The experimental assessment and prediction of the thrust force and torque involved in drilling composites reinforced with sheep horn are presented in this work. The matrix and sheep horn particles were combined in the right proportions before being moulded and poured into a mould, then allowed to cure at room temperature. Investigated properties included ultimate tensile strength, flexural strength, and hardness. To evaluate the quality of the hole, micrographs of the drilled hole were employed. When the mixture was optimised based on the properties, it was found that a 70:30 ratio produced the... [more]

Mixed martial arts (MMA) has always been surrounded by controversy due to the unusual muscle development of its participants, so it is crucial to know the strategies that have been implemented to reduce doping cases. The main purpose of this paper is to describe the various cases of doping detected by USADA in UFC MMA participants. In addition, strategies that are being developed to reduce cases of positive doping are proposed. From the UFC USADA database, doping cases were extracted, obtaining the substance or substances involved; the formula, physiological effect and the athletes involved; the dates of the sampling; if it was out of competition or in-competition and the sanction time. The substances that were most involved were found to be Ostarine (22), Clomiphene (9), Diuretics (10) and Stanozolol (9). Some sanctions were diminished because they were treated with contamination of supplements (cases of Ostarine) and cases of contamination of meat (Clomiphene). When contaminated supp... [more]

The poly(ethylene) glycol (PEG) capped mancozeb nanoformulation was prepared by the ultrasonic method using a 1% mancozeb solution and 20% capping agent, PEG-4000. The synthesized nanoformulation was characterized using UV-visible, FTIR, SEM and TEM techniques. The photolytic and photo catalytic experiments were carried out in a Borosil glass bottle in the presence of sunlight, varying the pH proportions at a single fortification level (1.0 g/mL) in ground water, under sunlight. The optimal catalyst concentration for complete degradation was observed to be 0.1 percent. The mancozeb nanoformulation in water was determined using the HPLC-PDA method, and the rate constant and the 50% degradation (DT50) values were calculated based on the results. The photolytic results show that there is no significant loss of residues due to adsorption. Titanium dioxide (TiO2) was discovered to be an excellent decontaminating catalyst in a variety of water samples. The compound survives for several days... [more]

The delays and disruptions during the pandemic have awakened interest in the sustainability and resilience of production systems to emergencies. In that context, the deployment of smart technologies has emerged as an almost mandatory development orientation to ensure the stability of manufacturing. The core value of smart technologies is to reduce the dependence on human labor in production systems. Thereby, the negative impacts caused by emergency situations are mitigated. However, the implementation of smart technologies in a specific production system that already exists requires a high degree of suitability. Motivated by this fact, this study proposes an integrated spherical fuzzy bounded rationality decision-making approach, which is composite of the spherical fuzzy decision-making trial and evaluation laboratory (SF DEMATEL) and the spherical fuzzy regret theory-based combined compromise solution (R-SF CoCoSo) method. The proposed approach reflects both the ambiguities and psycho... [more]

Aiming at the problem where the current engineering wake model does not describe the wind speed distribution of the wake in the complex terrain wind farm completely, based on the three-dimensional full wake model (3DJGF wake model), this paper proposed a wake model that can predict the three-dimensional wind speed distribution of the entire wake region in the complex wind farm, taking into account the Coanda effect, wind shear effect, and wake subsidence under the Gaussian terrain. Two types of Doppler lidar were used to conduct wind field experiments, and the inflow wind profile and three-dimensional expansion of the wake downstream of the wind turbine on the Gaussian terrain were measured. The experimental results showed that the wake centerline and terrain curve showed similar variation characteristics, and the near wake profile was similar to a super-Gaussian shape (asymmetric super-Gaussian shape) under low-wind-speed conditions, while the near wake profile presented a bimodal sha... [more]

The interest in the design and numerical modelling of adhesively-bonded components and structures for industrial application is increasing as a research topic. Although research on joint failure under pure mode is widespread, applied bonded joints are often subjected to a mixed mode loading at the crack tip, which is more complex than the pure mode and affects joint strength. Failure of these joints under loading is the objective of predictions through mathematical and numerical models, the latter based on the Finite Element Method (FEM), using Cohesive Zone Modelling (CZM). The Single leg bending (bending) testing is among those employed to study mixed mode loading. This work aims to validate the application of FEM-CZM to SLB joints. Thus, the geometries used for experimental testing were reproduced numerically and experimentally obtained properties were employed in these models. Upon the validation of the numerical technique, a parametric study involving the cohesive laws’ parameters... [more]

To solve the water pollution problem caused by methylene blue (MB), areca residue biochar (ARB) was prepared by pyrolysis at 600 °C, and modified areca residue biochar (M-ARB) was obtained by modifying ARB with 1.5 mol/L NaOH, and they were utilized to adsorb and eliminate MB from water. The structural characteristics of ARB and M-ARB were examined, and the main influencing factors and adsorption mechanism of MB adsorption process were investigated. The outcomes demonstrated an increase in M-ARB’s specific surface area and total pore volume of 66.67% and 79.61%, respectively, compared with ARB, and the pore structure was more abundant, and the content of oxygen element was also significantly increased. When the reaction temperature was 25 °C, starting pH of the mixture was 10, the initial MB concentration was 50 mg/L, the ARB and M-ARB dosages were 0.07 g/L and 0.04 g/L, respectively, the adsorption equilibrium was achieved at about 210 min, and the elimination rate for MB exceeded 94%... [more]

Nitrous oxide (N2O) is a major radiative forcing and stratospheric ozone-depleting gas. Among natural sources, freshwater ecosystems are significant contributors to N2O. Although temperature is a key factor determining the N2O emissions, the respective effects of temperature on emitted and dissolved N2O in the water column of freshwater ecosystems remain unclear. In this study, 48 h incubation experiments were performed at three different temperatures; 15 °C, 25 °C, and 35 °C. For each sample, N2O emission, dissolved N2O in the overlying water and denitrification rates were measured, and N2O-related functional genes were quantified at regular intervals. The highest N2O emission was observed at an incubation of 35 °C, which was 1.5 to 2.1 factors higher than samples incubated at 25 °C and 15 °C. However, the highest level of dissolved N2O and estimated exchange flux of N2O were both observed at 25 °C and were both approximately 2 factors higher than those at 35 °C and 15 °C. The denitri... [more]

In this paper, a novel method is proposed for the incorporation of data-driven machine learning techniques into process optimization. Such integration improves the computational time required for calculations during optimization and benefits the online application of advanced control algorithms. The proposed method is illustrated via the chemical absorption-based postcombustion CO2 capture process, which plays an important role in the reduction of CO2 emissions to address climate challenges. These processes simulated in a software environment are typically based on first-principle models and calculate physical properties from basic physical quantities such as mass and temperature. Employing first-principle models usually requires a long computation time, making process optimization and control challenging. To overcome this challenge, in this study, machine learning algorithms are used to simulate the postcombustion CO2 capture process. The extreme gradient boosting (XGBoost) and suppor... [more]

Nitrous oxide is widely used as oxidizer or nitriding agent in numerous industrial activities such as production of adipic acid and caprolactam and even for production of some semiconductors. Further, it is used as an additive in order to increase the power output of engines, and as an oxidizer in propulsion systems of rockets, because it has a large heat of formation (+81.6 kJ mol−1). N2O is highly exothermic, and during its decomposition a supplementary heat amount is released, so it needs special handling conditions. The combustion of fuels in nitrous oxide atmosphere can lead to high unstable and turbulent deflagrations that speedily self-accelerate and therefore a deflagration can change to a detonation. The peak explosion pressure and the maximum rate of pressure rise of explosions in confined spaces are key safety parameters to evaluate the hazard of processes running in closed vessels and for design of enclosures able to withstand explosions or of their vents used as relief dev... [more]

Wind generators have attracted a lot of attention in the realm of renewable energy systems, but they are vulnerable to harsh environmental conditions and grid faults. The influence of the manta ray foraging optimizer (MRFO) on the dynamic performance of the two commonly used variable speed wind generators (VSWGs), called the permanent magnet synchronous generator (PMSG) and doubly-fed induction generator (DFIG), is investigated in this research article. The PMSG and DFIG were exposed to identical wind speed changes depending on their wind turbine characteristics, as well as a dangerous three-phase fault, to evaluate the durability of MRFO-based wind side controllers. To protect VSWGs from hazardous gusts and obtain the optimum power from incoming wind speeds, we utilized a pitch angle controller and optimal torque controller, respectively, in our study. During faults, the commonly utilized industrial approach (crowbar system) was exclusively employed to aid the studied VSWGs in achievi... [more]

The CNC machine tool is the passive executor of machining code. It cannot predict the machining accuracy during machining. If the error is found to be out of tolerance after processing, it will not only scrap the parts, but also greatly affect the processing efficiency. This phenomenon is very prominent when machining sculptured surface parts with five-axis machine tools. Therefore, this paper proposes a Digital Twin (DT) modeling method of five-axis machine tools for predicting Continuous Trajectory Contour Error (CTCE) caused by tracking errors and geometric errors. The DT consists of three parts: the Setpoints Trajectory (ST) model, the Actual Trajectory (AT) model considering tracking errors and geometric errors and the CTCE model. For a specific machine tool, according to the basic geometric information of the machine tool (tool length, kinematic chain information, etc.) and 41 geometric errors, the DT can be established. Inputting the Setpoints Positions (SPs) and the Linear Enco... [more]

This study implemented a bidirectional artificial neuro-fuzzy inference system (ANFIS) to solve the problem of system resilience in synchronized and islanded grid mode/operation (during normal operation and in the event of a catastrophic disaster, respectively). Included in this setup are photovoltaics, wind turbines, batteries, and smart load management. Solar panels, wind turbines, and battery-charging supercapacitors are just a few of the sustainable energy sources ANFIS coordinates. The first step in the process was the development of a mode-specific control algorithm to address the system’s current behavior. Relative ANFIS will take over to greatly boost resilience during times of crisis, power savings, and routine operations. A bidirectional converter connects the battery in order to keep the DC link stable and allow energy displacement due to changes in generation and consumption. When combined with the ANFIS algorithm, PV can be used to meet precise power needs. This means it c... [more]

This study aimed at the preparation and characterization of co-amorphous loratadine−citric acid orally disintegrating dosage forms (ODx). A co-amorphous loratadine−citric acid was prepared by solvent evaporation method in three different molecular ratios. DSC, FTIR, and dissolution studies have been conducted for the binary system. The co-amorphous system was used to obtain oral lyophilizates and orally disintegrating tablets by direct compression. Diameter, thickness, hardness, disintegration time, uniformity of mass, and dissolution was determined for the dosage forms. DSC curves showed a lack of sharp endothermic peaks for the binary systems. FTIR spectra presented a hypsochromic modification of the characteristic peaks. Dissolution studies indicated a five-fold increase in the dissolved amount compared to pure loratadine in water. Disintegration times of direct compression ODx varied in the range of 34−41 s and for freeze-dried ODx in the range of 8−9 s. Friability was under 1% in... [more]

In recent years, more and more biochars have been employed to treat dye wastewater. In order to increase the utilization of moringa seed shell resources and enrich the removal method of methylene blue (MB) in solution, in the current study, the magnetic moringa seed shells biochar was prepared through ultrasonic-assisted impregnation and pyrolysis, while Fe3O4 was used to activate the material to obtain adsorption (Fe3O4-MOS). The prepared adsorbents were characterized by SEM-EDS, XRD, XPS, FTIR, N2 adsorption and desorption and VSM. Under the suitable experimental conditions, the removal rate can be close to 100% and the maximum adsorption capacity of MB could be 219.60 mg/g. The Freundlich model provided a good match to the data presented by the adsorption isotherm, and the adsorption of MB on Fe3O4-MOS was a spontaneous and endothermic reaction. Study of the mechanism indicated that pore adsorption, electrostatic interaction, hydrogen bond, and π-π interaction were the major adsorpt... [more]

The drying industry has grown considerably due to the tremendous demand for non-perishable food. Convective drying is one of the most popular equipment in the drying industry (food, chemical, pharmaceutical, etc.). One of the drawbacks of this equipment, when used for convective drying, is the non-uniformity in the final product quality. This study presents the development of a numerical model through Computational Fluid Dynamics (CFD). The drying chamber of a heat pump dryer is assessed from the perspective of drying air velocity and temperature profiles. The model was developed by solving different transport phenomena-related equations. The established methodology was set up to evaluate how the drying air velocity and temperature distribution affect the drying chamber. These results will define if there is a need to redesign it. The air velocity and temperature profile results show a need to redesign the chamber. Only trays 2, 3, and 4 are the ones that would achieve the drying of th... [more]

Alternative splicing (AS) is a regulatory mechanism of post-transcriptional regulation that plays an important role in plant response to abiotic stresses. However, corresponding research involving the mechanism of AS in the nitrogen starvation response of C. reinhardtii is rare. This study performed a comprehensive and systematic analysis of AS events in C. reinhardtii at nine time points (0 h, 10 m, 30 m, 1 h, 6 h, 8 h, 24 h, and 48 h) under nitrogen starvation. It used STAR and rMATS tools to identify and quantify the probability of the AS event happening through the transcriptome high-throughput sequencing data. A total of 5806 AS events in 3500 genes were identified, and the retained intron and skipped exon were considered the main AS types. The genes related to the AS event in nitrogen starvation were mainly involved in spliceosome and transporter and enriched in the citrate cycle and fatty acid degradation pathways. These results suggested that AS may play an important role in th... [more]

The type of solid substrate plays a critical role in determining the kinetics of the spray fluidized bed (SFB) agglomeration process. In the case of porous (also soft) primary particles (PPs), droplet aging is due to imbibition and drying. The surface properties of the substrate also change due to imbibition. The focus of the present work is to simulate the agglomeration of the spray-dried milk powder using the Monte Carlo (MC) method coupled with a drying-imbibition model. In order to extract the morphology of the formed agglomerates, an aggregation model is employed. Further, this aggregation model is employed to predict the number of positions on the PPs (later agglomerates) for droplet deposition; previously, the ‘concept of positions’ was used. The transient growth of different milk powders (whole and skim) is depicted using the enhanced MC model. The enhancement in the droplet deposition model had a prominent influence on the overall kinetics of agglomeration. As expected, this e... [more]

Wheat is among the world’s most important agricultural crops, with winter wheat accounting for approximately 25.5% of the total agricultural crop in Lithuania. The unchangeable goal of crop production is to achieve good and economically beneficial crop yield, but such efforts are often based on conventional agrotechnological solutions, and excessive fertilization, which is uneconomical and negatively affects the soil, the environment, and human health. In order to produce a rich and high-quality cereal crop, scientists and farmers are increasingly focusing on managing the sowing and fertilization processes. Precision technologies based on spectrometric methods of soil and plant characterization can be used to influence the optimization of sowing and fertilizer application rates without compromising crop yield and quality. The aim of this study was to investigate the effect of site-specific seeding and variable-rate precision fertilization technologies on the growth, yield, and quality... [more]

The aim of this study was to investigate the influence of cryogrinding pretreatment on the recovery of essential oil, phenolics and pigments from myrtle leaves. The duration of cryogrinding (3, 6 and 9 min) in combination with the duration of hydrodistillation (30, 60 and 90 min) for the isolation of essential oils and the duration of hydroethanolic extraction (5, 10 and 15 min) for the isolation of phenols and pigments were studied as independent factors in a full factorial design. The major volatile components detected in myrtle leaf essential oil were myrtenyl acetate, 1,8-cineole, α-pinene and linalool. The most abundant phenols detected were myricetin derivatives (myricetin 3-O-galactoside and myricetin 3-O-rhamnoside), galloylquinic acid, myricetin and digalloylquinic acid, while the major pigments were chlorophyll b, pheophytin a and lutein. A 3 min cryogrinding pretreatment significantly increased the yield and concentrations of essential oil volatile compounds and reduced the... [more]

The copper demand and production in China are the largest in the world. In order to obtain the trends of the energy consumption and GHG emissions of copper production in China over a number of years, this paper uses a life cycle analysis method to calculate the above two indexes, in the years between 2004 and 2017. The life cycle energy consumption ranged between 101.78 and 31.72 GJ/t copper and the GHG emissions varied between 9.96 and 3.09 t CO2 eq/t copper due to the improvements in mining and smelting technologies. This study also analyses the influence of electricity sources, auxiliary materials consumption, and copper ore grade on the life cycle performance. Using wind or nuclear electricity instead of mixed electricity can reduce energy consumption by 63.67−76.27% or 64.23−76.94%, and GHG emissions by 64.42−77.84% or 65.08−78.63%, respectively. The GHG emissions and energy consumption of underground mining are approximately 2.97−7.03 times that of strip mining, while the influen... [more]