The increasing demands for water and the dwindling resources of fresh water create a critical need for continually enhancing desalination capacities. This poses a challenge in distressed desalination network, with incessant water demand growth as the conventional approach of undertaking large expansion projects can lead to low utilization and, hence, low capital productivity. In addition to the option of retrofitting existing desalination units or installing additional grassroots units, there is an opportunity to include emerging modular desalination technologies. This paper develops the optimization framework for the capacity planning in distressed desalination networks considering the integration of conventional plants and emerging modular technologies, such as membrane distillation (MD), as a viable option for capacity expansion. The developed framework addresses the multiscale nature of the synthesis problem, as unit-specific decision variables are subject to optimization, as well... [more]

For the shipbuilding industry worldwide, work-related accidents at the construction site have been a major concern. Workers at the shipyards are consistently exposed to dangerous environments and their intensity of work is quite high. Considering the complexity of the shipbuilding process, efficient communications between workers are essential in the workplace, but current communication methods, which mostly use wireless technologies, are sometimes limited by the structural blocks, creating shadow areas where the radio bands cannot reach. As a countermeasure, SUNCOM Co., Ltd in the Republic of Korea has developed the PLC-based communication system followed by establishing a test-bed facility in cooperation with SK Telecom Co., Ltd and the Hyundai Heavy Industries Co., Ltd. This system and applied technologies are expected to reduce accidents in the field and be applied for other industries having the same problem, providing an uninterrupted communication environment and safer working c... [more]

Physico-chemical modelling and predictive simulation are becoming key for modern process engineering. Rigorous models rely on the separation of different effects (e.g., fluid dynamics, kinetics, mass transfer) by distinct experimental parameter determination on lab-scale. The equations allow the transfer of the lab-scale data to any desired scale, if characteristic numbers like e.g., Reynolds, Péclet, Sherwood, Schmidt remain constant and fluid-dynamics of both scales are known and can be described by the model. A useful model has to be accurate and therefore match the experimental data at different scales and combinations of process and operating parameters. Besides accuracy as one quality attribute for the modelling depth, model precision also has to be evaluated. Model precision is considered as the combination of modelling depth and the influence of experimental errors in model parameter determination on the simulation results. A model is considered appropriate if the deviation of... [more]

Healthy fish production requires intensive care and ensuring stable and healthy production environment inside the farm tank is a challenging task. An Internet of Things (IoT) based automated system is highly desirable that can continuously monitor the fish tanks with optimal resources utilization. Significant cost reduction can be achieved if farm equipment and water pumps are operated only when required using optimization schemes. In this paper, we present a general system design for smart fish farms. We have developed an optimization scheme for water pump control to maintain desired water level in fish tank with efficient energy consumption through appropriate selection of pumping flow rate and tank filling level. Proposed optimization scheme attempts to achieve a trade-off between pumping duration and flow rate through selection of optimized water level. Kalman filter algorithm is applied to remove error in sensor readings. We observed through simulation results that optimization sc... [more]

In solid backfill coal mining (SBCM), loose gangue backfill material (LGBM) is used to backfill the goaf after coal resources are exploited from the underground mines. Under certain geological conditions, LGBM with a certain height may be soaked in the water, and then becomes saturated, significantly altering its mechanical properties. The confined compression experiments were used in this paper to analyze the deformation and the crushing characteristics of LGBM with varying water soaked heights in coal mines. The results showed that a large number of small holes that were distributed in the gangue blocks were the main reason why the material absorbed water and was softened. The crushing ratio and the maximum axial strain of LGBM samples gradually increased with the water soaked heights of the samples. In addition, there was a strong linear correlation between the crushing ratio and the maximum axial strain. When LGBM was used as a solid backfill material in SBCM, its deformation resis... [more]

We report the application of a recently proposed approach for modeling biological systems using a maximum entropy production rate principle in lieu of having in vivo rate constants. The method is applied in four steps: (1) a new ordinary differential equation (ODE) based optimization approach based on Marcelin’s 1910 mass action equation is used to obtain the maximum entropy distribution; (2) the predicted metabolite concentrations are compared to those generally expected from experiments using a loss function from which post-translational regulation of enzymes is inferred; (3) the system is re-optimized with the inferred regulation from which rate constants are determined from the metabolite concentrations and reaction fluxes; and finally (4) a full ODE-based, mass action simulation with rate parameters and allosteric regulation is obtained. From the last step, the power characteristics and resistance of each reaction can be determined. The method is applied to the central metabolism... [more]

Computational fluid dynamics (CFD) is a powerful tool to model fluid flow motions for momentum, mass and energy transfer. CFD has been widely used to simulate the flow pattern and temperature distribution during the thermal processing of foods. This paper discusses the background of the thermal processing of food, and the fundamentals in developing CFD models. The constitution of simulation models is provided to enable the design of effective and efficient CFD modeling. An overview of the current CFD modeling studies of thermal processing in solid, liquid, and liquid-solid mixtures is also provided. Some limitations and unrealistic assumptions faced by CFD modelers are also discussed.

Critical infrastructure such as power and water delivery is growing rapidly in the developing world and there are developed assets that must be maintained in developed nations. One underground component that is difficult to inspect is water supply pipelines. Most of the water line accidents occur in buildings is due to pipeline damage. To minimize accidental loss, a risk assessment method is needed to continuously assess risk and report any abnormality for preventative maintenance. In this work, a blended hierarchical fuzzy logic model for water supply pipeline risk index assessment is proposed. Four important parameters are inputs to the proposed blended hierarchical fuzzy logic model. The blended hierarchical fuzzy logic model dramatically reduces the number of conditions in the rule base. Rule reduction is important because the transparency and interpretation are compromised by an overly large set. Further, it is challenging to accurately design a large number of rules because rule... [more]

Due to insufficient endogenous production of erythropoietin, chronic kidney disease patients with anemia are often treated by the administration of recombinant human erythropoietin (EPO). The target of the treatment is to keep the patient’s hemoglobin level within a normal range. While conventional methods for guiding EPO dosing used by clinicians normally rely on a set of rules based on past experiences or retrospective studies, model predictive control (MPC) based dosage optimization is receiving attention recently. The objective of this paper is to incorporate the hemoglobin response model uncertainty into the dosage optimization decision making. Two methods utilizing Conditional Value at Risk (CVaR) are proposed for hemoglobin control in chronic kidney disease under model uncertainty. The first method includes a set-point tracking controller with the addition of CVaR constraints. The second method involves the use of CVaR directly in the cost function of the optimal control problem... [more]

Special Issue: Microbial Community Modeling: Prediction of Microbial Interactions and Community Dynamics

The spreading of cancer cells, also known as metastasis, is a lethal hallmark in cancer progression and the primary cause of cancer death. Recent cancer research has suggested that the remodeling of collagen fibers in the extracellular matrix (ECM) of the tumor microenvironment facilitates the migration of cancer cells during metastasis. ECM remodeling refers to the following two procedures: the ECM degradation caused by enzyme matrix metalloproteinases and the ECM alignment due to the cross-linking enzyme lysyl oxidase (LOX). Such modifications of ECM collagen fibers result in changes of ECM physical and biomechanical properties that affect cancer cell migration through the ECM. However, the mechanism of such cancer migration through a remodeling ECM remains not well understood. A mathematical model is proposed in this work to better describe and understand cancer migration by means of ECM remodeling. Effects of LOX are considered to enable transport of enzymes and migration of cells... [more]

Medical data classification is an important factor in improving diagnosis and treatment and can assist physicians in making decisions about serious diseases by collecting symptoms and medical analyses. In this work, hybrid classification optimization methods such as Genetic Algorithm (GA), Particle Swam Optimization (PSO), and Fireworks Algorithm (FWA), are proposed for enhancing the classification accuracy of the Artificial Neural Network (ANN). The enhancement process is tested through two experiments. First, the proposed algorithms are applied on five benchmark medical data sets from the repository of the University of California in Irvine (UCI). The model with the best results is then used in the second experiment, which focuses on tuning the parameters of the selected algorithm by choosing a different number of iterations in ANNs with different numbers of hidden layers. Enhanced ANN with the three optimization algorithms are tested on biological gene sequence big dataset obtained... [more]

Developing and improving mechanism-oriented computational models to better explain biological phenomena is a dynamic and expanding frontier. As the complexity of targeted phenomena has increased, so too has the diversity in methods and terminologies, often at the expense of clarity, which can make reproduction challenging, even problematic. To encourage improved semantic and methodological clarity, we describe the spectrum of Mechanism-oriented Models being used to develop explanations of biological phenomena. We cluster explanations of phenomena into three broad groups. We then expand them into seven workflow-related model types having distinguishable features. We name each type and illustrate with examples drawn from the literature. These model types may contribute to the foundation of an ontology of mechanism-based biomedical simulation research. We show that the different model types manifest and exert their scientific usefulness by enhancing and extending different forms and degre... [more]

The growing demand for lithium necessitates the development of an efficient process to recover it from three kinds of solutions, namely brines as well as acid and alkaline leach liquors of primary and secondary resources. Therefore, the separation of lithium(I) from these solutions by solvent extraction was reviewed in this paper. Lithium ions in brines are concentrated by removing other metal salts by crystallization with solar evaporation. In the case of ores and secondary resources, roasting followed by acid/alkaline leaching is generally employed to dissolve the lithium. Since the compositions of brines, alkaline and acid solutions are different, different commercial extractants are employed to separate and recover lithium. The selective extraction of Li(I) over other metals from brines or alkaline solutions is accomplished using acidic extractants, their mixture with neutral extractants, and neutral extractants mixed with chelating extractants in the presence of ferric chloride (F... [more]

The ampholytic chitosan based flocculant carboxylated chitosan graft-(3-chloro-2-hydroxypropyl) trimethylammonium chloride-dimethyl diallyl ammonium chloride (CPCTS-g-P (CTA-DMDAAC)) was synthesized by photo polymerization using carboxylated chitosan (CPCTS), 3-chloro-2-chloropropyltrimethylammonium chloride (CTA) and dimethyldiallylammonium chloride (DMDAAC) as the cationic co-monomers. The effects of monomer concentration, the ratio of CPCTS and cationic monomers, cationic degree, initiator time, photoinitiator concentration, and pH value on the properties of CPCTS-g-P (CTA-DMDAAC) were studied. The microcystis aeruginosa that was cultured in laboratory was used for CPCTS-g-P (CTA-DMDAAC) flocculation tests. The effects of CPCTS-g-P (CTA-DMDAAC) dosage, pH value and G value on flocculation performance were investigated. The maximum removal rate of chlorophyll-a (Chl-a) and chemical oxygen demand (COD) that were obtained by CPCTS-g-P (CTA-DMDAAC) were 98.8% and 96.5% under the conditi... [more]

As the pharmaceutical industry seeks more efficient methods for the production of higher value therapeutics, the associated data analysis, data visualization, and predictive modeling require dependable data origination, management, transfer, and integration. As a result, the management and integration of data in a consistent, organized, and reliable manner is a big challenge for the pharmaceutical industry. In this work, an ontological information infrastructure is developed to integrate data within manufacturing plants and analytical laboratories. The ANSI/ISA-88.01 batch control standard has been adapted in this study to deliver a well-defined data structure that will improve the data communication inside the system architecture for continuous processing. All the detailed information of the lab-based experiment and process manufacturing, including equipment, samples and parameters, are documented in the recipe. This recipe model is implemented into a process control system (PCS), dat... [more]

Shale gas production is associated with significant usage of fresh water and discharge of wastewater. Consequently, there is a necessity to create proper management strategies for water resources in shale gas production and to integrate conventional energy sources (e.g., shale gas) with renewables (e.g., solar energy). The objective of this study is to develop a design framework for integrating water and energy systems including multiple energy sources, the cogeneration process and desalination technologies in treating wastewater and providing fresh water for shale gas production. Solar energy is included to provide thermal power directly to a multi-effect distillation plant (MED) exclusively (to be more feasible economically) or indirect supply through a thermal energy storage system. Thus, MED is driven by direct or indirect solar energy and excess or direct cogeneration process heat. The proposed thermal energy storage along with the fossil fuel boiler will allow for the dual-purpos... [more]

Gob-side entry retaining (GER) employed in a thin coal seam (TCS) can increase economic benefits and coal recovery, as well as mitigate gas concentration in the gob. In accordance with the caving style of a limestone roof, the gas concentration and air pressure in the gob were analyzed, and a roof-cutting mechanical model of GER with a roadside backfill body (RBB) was proposed, to determine the key parameters of the GER-TCS, including the roof-cutting resistance and the width of the RBB. The results show that if the immediate roof height is greater than the seam height, the roof-cutting resistance and width of the RBB should meet the requirement of the immediate roof being totally cut along the gob, for which the optimal roof-cutting resistance and width of RBB were determined by analytical and numerical methods. The greater the RBB width, the greater its roof-cutting resistance. The relationship between the supporting strength of the RBB and the width of the RBB can be derived as a co... [more]

A lab-scale of a side stream anaerobic membrane bioreactor (AnMBR) equipped with a tubular membrane operated at the mesophilic temperature of 37.0 ± 1.2 °C for treating domestic wastewater was tested to investigate its performance and fouling characteristics at two organic loading rates (OLR) of 0.25 kg COD m−3d−1, and 0.70 kg COD m−3d−1, respectively. The AnMBR was operated for 600 days at sludge retention time (SRT) of 100 days. This AnMBR exhibits excellent chemical oxygen demand (COD) removal of 91% at 0.25 kg COD m−3d−1, and 94% at 0.7 kg COD m−3d−1 respectively, with effluent-soluble COD below 50 mg/L. Chemically-enhanced cleaning method using NaOH, NaOCl, and citric acid solution were introduced for fouling investigation at these two stages. The results showed that sequential chemical cleaning of alkaline and acid were most effective to recover the membrane flux. The alkaline cleaning was effective at removing organic foulants, while citric acid cleaning was effective at removin... [more]

Due to the complex formation process of a rock mass, a large number of fissures, joints, faults, other defects exist and the defects commonly contain infilled materials. The jointed rock masses are in a complex geological environment, in which the geometric distribution and the boundary condition can greatly affect the mechanical behavior of the infilled jointed rock mass. In this study, the infilled jointed rock mass specimens with different dip angles are prepared using similar materials, and the uniaxial and biaxial compression tests on the specimens are conducted. The effect of the joint dip angle on the mechanical behavior of the infilled jointed rock mass under uniaxial and biaxial compressions is investigated. The results show that the uniaxial compressive strength shows a W-shaped variation, and the biaxial compressive strength shows a V-shaped variation with an increase in the dip angle. Most of the cracks appear in pairs around the joint and occur symmetrically in a bilateral... [more]

A mathematical model for a transmission of TB-HIV/AIDS co-infection that incorporates prevalence dependent behaviour change in the population and treatment for the infected (and infectious) class is formulated and analyzed. The two sub-models, when each of the two diseases are considered separately are mathematically analyzed. The theory of optimal control analysis is applied to the full model with the objective of minimizing the aggregate cost of the infections and the control efforts. In the numerical simulation section, various combinations of the controls are also presented and it has been shown in this part that the optimal combination of both prevention and treatment controls will suppress the prevalence of both HIV and TB to below 3% within 10 years. Moreover, it is found that the treatment control is more effective than the preventive controls.

This work investigates the effect of various membrane substrates and coating conditions on the formation of carbon/ceramic mixed matrix membranes for desalination application. The substrates were impregnated with phenolic resin via a vacuum-assisted method followed by carbonization under an inert gas. Substrates with pore sizes of 100 nm required a single impregnation step only, where short vacuum times (90%) and high water fluxes (up to 25 L m−2 h−1). The increase in water flux as a function of the vacuum time confirms the vacuum etching effect resulting from the vacuum-assisted method. Substrates with pore sizes of 140 nm required two impregnation steps. These pores were too large for the ceramic inter-particle space to be filled with phenolic resin via a single step. In the second impregnation step, increasing the concentration of the phenolic resin resulted in membranes with lower water fluxes. These results indicate that thicker films were formed by increasing the phenolic resin c... [more]

Recently, the Internet has been utilized by many applications to convey time-sensitive messages. The persistently expanding Internet coverage and its easy accessibility have offered to ascend to a problem which was once regarded as not essential to contemplate. Nowadays, the Internet has been utilized by many applications to convey time-sensitive messages. Wireless access points have widely been used but these access points have limitations regarding area coverage. So for covering a wider space, various access points need to be introduced. Therefore, when the user moves to some other place, the devices expected to switch between access points. Packet loss amid the handovers is a trivial issue. MediaSense is an Internet of Things distributed architecture enabling the development of the IoT application faster. It deals with this trivial handover issue by utilizing a protocol called Distributed Context eXchange Protocol. However, this protocol is centralized in nature and also suffers in... [more]

This study explores the possible use of ionic liquids as a solvent in a commercial high-pressure CO₂ removal process, to gain environmental and energy benefits. There are two main constraints in realizing this: ionic liquids can be corrosive, specifically when mixed with a water/amine solution with dissolved O₂ & CO₂; and CO₂ absorption within this process is not very well understood. Therefore, scavenging CO₂ to ppm levels from process gas comes with several risks. We used 1-butyl-3-methylimidazoium methane sulphonate [bmim][MS] as an ionic liquid because of its high corrosiveness (due to its acidic nature) to estimate the ranges of expected corrosion in the process. TAFEL technique was used to determine these rates. Further, the process was simulated based on the conventional absorption⁻desorption process using ASPEN HYSYS v 8.6. After preliminary model validation with the amine solution, [bmim][MS] was modeled based on the properties found in the literature. The energy compariso... [more]

Columns are widely used as packed-bed or fixed-bed reactors in the chemical process industry. Packed columns are also used for carrying out chemical separation techniques such as adsorption, distillation, extraction and chromatography. A combination of the variability in flow path lengths, and the variability of velocity along these flow paths results in significant broadening in solute residence time distribution within columns, particularly in those having low bed height to diameter ratios. Therefore, wide packed-column reactors operate at low efficiencies. Also, for a column of a particular bed height, the ratio of heat transfer surface area to reactor volume varies inversely as the radius. Therefore, with wide columns, the available heat transfer area could become a limiting factor. In recent papers, box-shaped or cuboid packed-bed devices have been proposed as efficient alternatives to packed columns for carrying out chromatographic separations. In this paper, the use of cuboid pa... [more]