The energetic usage of fuels from renewable sources or waste material is associated with controlled combustion processes with industrial burner equipment. For the observation of such processes, camera systems are increasingly being used. With additional completion by an appropriate image processing system, camera observation of controlled combustion can be used for closed-loop process control giving leverage for optimization and more efficient usage of fuels. A key element of a camera-based control system is the robust segmentation of each burners flame. However, flame instance segmentation in an industrial environment imposes specific problems for image processing, such as overlapping flames, blurry object borders, occlusion, and irregular image content. In this research, we investigate the capability of a deep learning approach for the instance segmentation of industrial burner flames based on example image data from a special waste incineration plant. We evaluate the segmentation qu... [more]

The support of economic sectors that exploit natural bio-based resources in a particular region is an opportunity to benefit from local potentials in terms of sustainability, employment, output, and household income. Hence a relevant question emerges, namely, how can bioeconomy sectors be adequately supported? Within this context, another issue is whether the bioeconomy development strategy at a national level should be the same as that at a regional level. To address these issues, in the current study a comparison was made between the bioeconomy sectors at the country level based on the case study of Poland and one of the poorest regions in the European Union—the Lubelskie Region. A regional input−output model was built for the regional economy and compared with the national model. The bioeconomy-oriented regional input−output table was built by applying a hybrid regionalization method, combining non-survey techniques and a questionnaire survey that was carried out in companies of mix... [more]

The paper presents a method for the frequency characterization of voltage transformers (VTs) for medium voltage (MV) grids which involves only sine waves. It is called extended SINDICOMP, since it is an extended version of the previously developed technique SINDICOMP. It requires, in the first step, an evaluation and a compensation of the non-linearity introduced by the VT when it is supplied with a 50 Hz sinusoidal input at rated value. Then, the VT is characterized with a low voltage sinusoidal frequency sweep from the second harmonic frequency up to the first resonance frequency. Some rules to build the approximated frequency response, starting from these two sets of data, are given in the paper. The proposed approach is applied to three commercial MV VTs. Significant improvement of the VT performance is obtained, compared to the use of a frequency response obtained from the low voltage characterization.

Precise torque control without pulsations is one of the major quality issues in pulse-width modulated voltage-source inverter (PWM-VSI) drives. Theoretically, it could be postulated that at frequencies of some kHz, the machine’s inertia absorbs switching frequency torque harmonics, and the resulting torque becomes smooth; though, in reality, parasitic effects in voltage source inverters may cause additional torque harmonics of low order. In particular, first, second and sixth torque harmonics are observed. Such torque harmonics are especially dangerous for normal drive operation, since they may be amplified by drive train resonances at corresponding rotational velocities. New parasitic effects in PWM-VSI control, leading to torque harmonic of low order, are described in the paper, and recommendations for their compensation are given.

This paper proposes a robust finite-time controller (FTC) for a permanent magnet synchronous generator (PMSG)-based wind turbine generator (WTG). An adaptive observer is used for the rotor angle, rotor speed, and turbine torque estimations of the PMSG, thus eliminating the use of anemometers. The robustness of the proposed FTC regarding parameter uncertainty and the external weak power grid is analyzed. The impacts of the power grid short-circuit ratio (SCR) at the point of common coupling (PCC) on the conventional proportional-integral (PI) controller and the proposed FTC are discussed. Case studies illustrate that the proposed observer-based FTC is able to estimate the mechanical variables accurately and provides robust control for WTGs with parameter uncertainty and weak power grids.

The work is aimed at solving the problem of converting existing diesel power drives to gas fuels, which are cheaper and more environmentally friendly alternatives to diesel fuel. Method of energy efficiency increasing of alternative fuels has been improved. Thermochemical essence of energy increasing of source fuel based on the provisions of thermodynamics is considered. Alternative methanol fuel has been chosen as initial product for conversion process and its cost, energy value, and temperature conditions have been taken into account. Calculations showed that the thermal effect from combustion of the converted mixture of CO and H2 exceeds the effect from combustion of the same amount of non-convertible methanol. Fuel energy and engine power were increased due to thermochemical regeneration of exhaust gas heat. An experimental setup was created to study the operation of a converted diesel engine on methanol conversion products. Experimental studies of power, economic, and environmenta... [more]

Load flexibility management is a promising approach to face the problem of balancing generation and demand in electrical grids. This problem is becoming increasingly difficult due to the variability of renewable energies. Thermostatically-controlled loads can be aggregated and managed by a virtual battery, and they provide a cost-effective and efficient alternative to physical storage systems to mitigate the inherent variability of renewable energy sources. However virtual batteries require that an accurate control system is capable of tracking frequency regulation signals with minimal error. A real-time control system allowing virtual batteries to accurately track frequency or power signals is developed. The performance of this controller is validated for a virtual battery composed of 1000 thermostatically-controlled loads. Using virtual batteries equipped with the developed controller, a study focused on residential thermostatically-controlled loads in Spain is performed. The results... [more]

Internet of Things (IoT) is a new concept in the information and communication technology studies which indicates that any creature (human, animal, or object) can send and receive data through communication networks, such as the internet or intranet platform. Wireless sensors have limited energy resources due to the use of batteries to supply energy, and since it is usually not possible to replace the batteries of these sensors. In addition, the lifespan of the wireless sensor network is limited and short. Therefore, reducing the energy consumption of sensors in IoT networks for increasing network lifespan is one of the fundamental challenges and issues in these networks. In this paper, a routing protocol is proposed and simulated based on an ant colony optimization algorithm’s performance. The clustering is performed with a routing method based on energy level criteria, collision reduction, distance from the cluster-head to the destination, and neighborhood energy in the proposed meth... [more]

Hydrothermal liquefaction (HTL) is an effective technology for bio-crude production. To date, various co-liquefaction studies were performed with contrasted (different composition) biomasses in subcritical water. Therefore, the present study investigated co-hydrothermal liquefaction of similar kinds of lignocellulosic biomasses (wheat straw, eucalyptus, and pinewood) in supercritical water under equal ratios at 400 °C with catalytic medium (K2CO3). The lower bio-crude and higher solid yields were obtained in co-liquefaction experiments, as compared to liquefaction of individual feedstocks. On the other hand, higher carbon recovery and higher HHVs were noticed in co-liquefaction-derived bio-crudes. Gas chromatography with mass spectrometry (GC-MS) results showed that organic compounds were detected in all bio-crudes in the order of phenol derivatives > ketones/aldehydes > aromatics > carboxylic acids/esters. The aqueous phase from all samples contained higher TOC in the range of 19 to 3... [more]

Although oscillating water column (OWC) wave energy converters are arguably one of the most studied technologies, it is not clear which chamber geometry, among all of the available alternatives, would provide the best performance at a site of interest. In this work, a numerical model based on the Navier-Stokes equations for two compressible fluids, using a volume-of-fluid interface-capturing approach, is implemented to determine the best performing OWC geometry in a case study off the Port of Vigo (NW Spain). Four general shapes of OWC are analyzed: classic, stepped-bottom, U-shaped and L-shaped, and geometrical variants are investigated. In total, 18 chamber geometries are studied, considering the same turbine geometry in all of them. It was found that the U-shaped and L-shaped designs are the most easily tuned to resonate at a period of interest. Of these two, the L-shaped performs better. The best performance is achieved for an L-shaped OWC design with a shallow entrance, a high hor... [more]

Increasing greenhouse gas emissions and more and more restrictive European Union regulations necessitate the reduction of energy demand in buildings, including hotels. A more economical way of managing and operating a facility may lead to competitive advantage and a reduction in the negative impact on the environment. This study indicated that the hotel facility wastes significant amounts of water and energy, and the main sources of losses were determined. The design assumption was to achieve savings by introducing technical improvements in the most energy and water-consuming areas. The modification consisted of replacing some of the lighting, fittings, and ventilation. The results of the achieved water and energy savings were compared with the consumption recorded in 2019. The very satisfactory final results were obtained, showing savings about 20% higher than assumed by the hotel management. Taking into account the replacement of lighting in staircases and underground garages, in add... [more]

This study has compared Japan’s major electricity and gas companies in terms of their corporate performance measures from 2002 to 2018 using three types of Data Envelopment Analysis (DEA) approaches. We develop a new type of efficiency measures and indexes for DEA and then compare the performance of major electric power companies and city gas companies by examining a recent data set that include years after the Fukushima Daiichi Nuclear Power Plant accident. The data set incorporates the number of patents as an output that represents companies’ capability for technology innovation to investigate intertemporal changes of efficiency through index measures. The results provide us with two important findings. First, the electricity industry has experienced long-term difficulty due to the nuclear plant disaster; while the gas industry experienced less difficulty from the accident. Second, both industries have been gradually improving performance measures in recent years. However, the gas in... [more]

One of the dominant species of green algae growing along the Mediterranean coast of Egypt is Ulva lactuca. Pretreatment can have a major effect on biogas production because hydrolysis of the algae cell wall structure is a rate-limiting stage in the anaerobic digestion (AD) process. The use of ozone, a new pretreatment, to boost biogas production from the green algae Ulva lactuca was investigated in this study. Ozonation at various dosages was used in contrast to untreated biomass, and the effect on the performance of subsequent mesophilic AD using two separate inoculums (cow manure and activated sludge) was examined. The findings indicated that, in different studies, ozonation pretreatment showed a substantial increase in biogas yield relative to untreated algae. With an ozone dose of 249 mg O3 g−1 VS algal for Ulva lactuca, the highest biogas output (498.75 mL/g VS) was achieved using cow manure inoculum. The evaluation of FTIR, TGA, SEM, and XRD revealed the impact of O3 on the struc... [more]

Incorrect adjustment of railway traffic control devices (rtc) to the specificity of the area in terms of lightning density may result in their damage by lightning-caused electromagnetic pulses. An associated risk assessment, as the standard in the analyses of the strength of rtc devices, should be made. However, manufacturers of rtc devices typically do not perform tests with respect to such high overvoltage conditions. Particularly in the case of the EN 62305-2 standard, the manufacturers of new rail traffic control devices usually do not carry out such analyses. In this paper, an analysis of the damage vulnerability of rtc devices caused by lightning discharges for a selected structure, including a signal box equipped with digital rtc devices is presented. The necessity of conducting a lightning damage vulnerability analysis for rtc devices is demonstrated. A part of the railway track where lightning discharges occur was analyzed. The results of the risk analysis obtained with the us... [more]

This paper analyses innovative activities, including renewable energy sources (RES) in the housing market, the motivations for their introduction, effectiveness, benefits, limitations and management—which are open and current problems of Polish and international sustainable construction. This problem is part of a research gap concerning, among others, the role of developers and entities responsible for introducing energy innovations into housing construction. The aim of the paper is to analyse innovations, with particular emphasis on RES, introduced by residential developers in Poland in the context of global trends. The work is based on the results of surveys conducted among developers of the primary housing market. The research of 130 questionnaires received from entities such as multi-storey buildings and multi-family houses in Poland, was carried out on a nationwide sample using the CATI Computer Assisted Telephone Interview method. The results of the survey research were summarize... [more]

The scientific and technical issues related to energy harvesting and conversion are inseparably bound to the issues of environmental protection. Energy conversion systems and devices that are applied for converting the chemical energy contained in different fuels into heat, electricity, and cold in industry and housing are sources of different gases and solid particle emissions. Thus, the development of different technologies for energy conversion and environmental protection that can be jointly applied to cover growing energy needs has become a crucial challenge for scientists and engineers around the world. Progress in the precise description, modeling, and optimization of physical and chemical phenomena related to these energy conversion systems is a key research and development field for the economy. Legal and social issues that are affecting key aspects and problems related to the energy conversion and power sector are also significant and worth investigating. The aim of Energy Pr... [more]

Penetration of the power grid by renewable energy sources, distributed storage, and distributed generators is becoming increasingly common. Increased utilization of these distributed energy resources (DERs) has given rise to additional protection coordination concerns, particularly where they are utilized in an unbalanced manner or where loading among phases is unbalanced. Digital relays such as the SEL-751 (produced by Schweitzer Engineering Laboratories, Pullman, WA, USA) series have the capability of being set on a per-phase basis. This capability is underutilized in common practice. Additionally, in optimization algorithms for determining relay settings, the time-overcurrent characteristics (TOCs) of relays are generally not treated as variables and are assigned before running the optimization algorithm. In this paper, TOC options themselves are treated as discrete variables to be considered in the optimization algorithm. A mixed integer nonlinear programming problem (MINLP) is set... [more]

Energy poverty is a multidimensional and continuously growing societal problem, with political roots. In pursuit of mitigating the problem, the European Commission has adopted a bundle of policies, such as consumer protection measures, short-term financial interventions, motivations for energy efficiency (e.g., energy retrofits and replacement of old household appliance) and information campaigns, among others. There is no doubt, however, that increasing the income of vulnerable households would be the most preferred and effective option. Focusing on energy efficiency, a measure typically incorporated in the National Energy and Climate Plans (NECPs) of many Member States as a means to fight energy poverty, this paper aims to shed light on the need to gradually move towards more localized—not to say personalized—actions. In this direction, a labeled choice-based experiment is used, which involves a hypothetical selection between three alternative energy interventions, i.e., house retrof... [more]

In this paper, the enhanced auto-tuning technique based on the injection of two sinusoidal test signals of different frequencies applicable on the low voltage induction motor self-commissioning process is presented. The main feature of the proposed technique resides in the advanced signal processing of measured IM voltage and current signals based on the cascaded delay signal cancelation structure. This processing algorithm enables the filtering of the symmetry-related fundamental harmonic from the non-symmetrical test signal excitation typical for the self-commissioning process. Based upon the steady-state response from the proposed filtering block, the simple yet effective calculation method derives the complete parameter set of the IM equivalent circuit. The technique is validated through the variety of computer simulations and experimental tests on the digitally controlled low voltage IM traction drive.

The work presented in this paper aims to show how modern wind turbines can help to control the frequency in a small grid which suffers from large power imbalances. It is shown for an exemplary situation, which occurred in Flensburg’s distribution grid in 2019: a major blackout, which occurred after almost two hours in islanding operation, affecting almost the entire distribution grid, which supplies approximately 55,000 households and businesses. For the analysis, a wind turbine model and a grid support controller developed at the Wind Energy Technology Institute are combined with real measurements from the day of the blackout to generate a fictional yet realistic case study for such an islanding situation. For this case study, it is assumed that wind turbines with grid support functionalities are connected to the medium voltage distribution grid of the city. It is shown to what extent wind turbines can help to operate the grid by providing grid frequency support in two ways: By supply... [more]

This paper investigates the sensitivity (resistance) of a quadcopter on-board gyroscope system for the observation and tracking of a moving ground target to changing parameters of its regulator under interference conditions. It was shown that the gain in matrix elements is most sensitive, and even their slightest deviation from optimal values can lead to reduced target tracking efficiency and even loss of control system stability. Furthermore, the authors studied the energy expenditure at various gyroscope system control parameter values, while homing a quadcopter onto a ground target. A Matlab/Simulink environment was used to conduct simulations of the controlled gyroscope system dynamics. Selected test results are shown in graphic form.

Unlike the plug-in charging system, which has safety concerns such as electric sparks, wireless power transfer (WPT) is less-time consuming, is environmentally friendly and can be used in a wet environment. The inclusion of hybrid energy storage systems (HESSs) in electric vehicles (EVs) has helped to increase their energy density as well as power density. Combined with static wireless power transfer, a WPT−HESS system is proposed in this article. The HESS system includes a battery and supercapacitor (SC) connected to a WPT system through DC−DC converters. To ensure a stable DC bus voltage, an inductor−capacitor−capacitor series (LCC-S) compensation network has been implemented in the WPT system. Utilizing the two-port network theory, the design equations of the LCC-S compensation network are derived in order to realize the maximum efficiency point for the WPT system. To ensure that the WPT system operates at this maximum efficiency point and that the SC is charged to its maximum capac... [more]

This paper presents the findings of a laboratory study of the shear strength and yielding behavior of two glacial till soil deposits from the area of Heiligenhafen, northern Germany. The tests were conducted on reconstituted forms of the soils using a triaxial cell capable of controlling the temperature of the specimens. The experimental program included a series of multi-stage consolidated drained (CD) compression triaxial tests at temperature ranges between 20 and 60 °C. For the temperature range considered in this study, a mild reduction in the effective friction angle of the two till soils of less than 1° was observed due to an increase in temperature from 20 to 60 °C. All the results were carefully assessed in view of the intrinsic soil behavior and fabric, and existing trends are highlighted. The findings of this study provide valuable insights into the shearing properties of till deposits, and can contribute to the enhancement of existing soil constitutive models as well as the... [more]

Windows, which have a U-value that is governed by an insulating glass unit (IGU) U-value, must be a building’s only enclosure element, which has no design value concept. The declared U-value, which is calculated or measured with 0 °C of external ambient temperature, is used instead of the design value. For most of a building’s elements, its thermal transmittance with a decrease in the external temperature diminishes a little, i.e., improves. However, for modern window IGUs with Low-E coatings, it is the opposite: the thermal transmittance with a lowering external temperature increases. Therefore, for calculating the peak power for the heating of buildings it is necessary to pay attention to this phenomenon and, therefore, it would be wise to introduce the concept of design U-value for windows, recalculation rules, or affix their declared U-values. This is especially the case in modern times with the prevailing architectural tendencies for enlargement of transparent building elements. F... [more]

Wind energy plays a major role in decarbonisation of the electricity sector and supports achieving net-zero greenhouse gas emissions. Over the last decade, the wind energy deployments have grown steadily, accounting for more than one fourth of the annual electricity generation in countries like the United Kingdom, Denmark, and Germany. However, as the share of wind energy increases, system operators face challenges in managing excessive wind generation due to its nondispatchable nature. Currently, the most common practice is wind energy curtailment in which wind farm operators receive constraint payments to reduce their renewable energy production. This practice not only leads to wastage of large volumes of renewable energy, but also the associated financial cost is reflected to rate payers in the form of increased electricity bills. On-site energy storage technologies come to the forefront as a technology option to minimise wind energy curtailment and to harness wind energy in a more... [more]