The problem of reducing carbon dioxide emissions from flue gas, particularly from flue gas originating from coal-firing CFB systems, is currently an important challenge. Many centers around the world have tested post-combustion CO2 capture systems. One of these systems, operated using DR-VPSA adsorption technology (dual-reflux vacuum pressure swing adsorption), was tested under the Strategic Project in Poland. The flue gas in this study originated from a supercritical CFB boiler (460 MWe). An important problem involved in capturing CO2 from flue gas is the occurrence of SO2 and NOx. These substances have a negative effect on the CO2 adsorption process. In this study, commercial impregnated activated carbon was used to remove SO2 and NOx from CFB flue gas in the pre-treatment section during the tests of a pilot CO2 capture unit in a large-scale CFB boiler at the Lagisza Power Plant (Poland). The spent activated carbon was analyzed using several different methods (N2 adsorption−desorptio... [more]

In this paper, a novel methodological framework for energy hub (EH) planning, considering the correlation between renewable energy source (RES) and demand response (DR) uncertainties, is proposed. Unlike other existing works, our study explicitly considers the potential correlation between the uncertainty of integrated energy system operations (i.e., wind speed, light intensity, and demand response). Firstly, an EH single-objective interval optimization model is established, which aims at minimizing investment and operation costs. The model fully considers the correlation between various uncertain parameters. Secondly, the correlation between uncertainties is dealt with by the interval models of multidimensional parallelism and affine coordinate transformation, which are transformed into a deterministic optimization problem by the interval order relationship and probability algorithm, and then solved by a genetic algorithm. Finally, an experimental case is analyzed, and the results sho... [more]

The internal leakage of a hydraulic cylinder is an inevitable hydraulic system failure that seriously affects the working efficiency of the hydraulic system. Therefore, it is very important to accurately identify and predict leakage data in the hydraulic cylinder. In this paper, a model is proposed to simulate a small internal leakage of hydraulic cylinders, to convert the amount of leakage of hydraulic oil into strain signals through high-precision strain gauges and to train the collected strain signals using various neural networks to form a computational model and obtain prediction results from the model. The neural networks applied in this paper are convolutional neural networks, BP neural networks, T-S neural networks and Elman neural networks. The predicted results of the neural network are compared with the actual leakage amount. The results show that the prediction accuracy of the above four kinds of neural networks are all above 90%, of which the convolutional neural network i... [more]

One of the major anthropogenic sources of greenhouse gases is the operation of building stock. Improving its energy efficiency has the potential to significantly contribute to achieving climate change mitigation targets. The purpose of this study was to roughly estimate such potential for the operation of the national building stock of Czechia to steer the national debate on the development of related national plans. The estimation is based on a simplified energy model of the Czech building stock that consists of sub-models of residential and nonresidential building stocks, for which their future energy consumptions, shares of energy carriers and sources, and emission factors were modeled in four scenarios. Uncertainties from the approximation of the emission factors were investigated in a sensitivity analysis. The results showed that the operation of the Czech building stock in 2016 totaled 36.9 Mt CO2, which represented 34.6% of the total national carbon dioxide emissions. The four b... [more]

Selecting an appropriate wind farm location must be specific to a particular administrative region, which involves restrictions balance and trade-offs. Multi-criteria decision making (MCDM) and GIS are widely used in wind energy planning, but have failed to achieve the selection of an optimal location and make it difficult to establish a set of independent factors. Fuzzy measurement is an effective method to evaluate intermediate synthesis and calculates the factor weight through fuzzy integrals. In this paper, optimal wind farm location is analyzed through coupling Grid GIS technique with λ fuzzy measure. Dalian City is selected as the study area for proving the feasibility of the proposed method. Typography, meteorological, transmission facilities, biological passage, and infrastructure are taken into the index system. All the indexes are specialized into victor grid cells which are taken as the base wind farm location alternative unit. The results indicate that the Grid GIS based λ... [more]

In loop heat pipes (LHPs), wick materials and their structures are important in achieving continuous heat transfer with a favorable distribution of the working fluid. This article introduces the characteristics of loop heat pipes with different wicks: (i) sintered stainless steel and (ii) ceramic. The evaporator has a flat-rectangular assembly under gravity-assisted conditions. Water was used as a working fluid, and the performance of the LHP was analyzed in terms of temperatures at different locations of the LHP and thermal resistance. As to the results, a stable operation can be maintained in the range of 50 to 520 W for the LHP with the stainless-steel wick, matching the desired limited temperature for electronics of 85 °C at the heater surface at 350 W (129.6 kW·m−2). Results using the ceramic wick showed that a heater surface temperature of below 85 °C could be obtained when operating at 54 W (20 kW·m−2).

Geological carbon storage is an effective method capable of reducing carbon dioxide (CO2) emissions at significant scales. Subsurface reservoirs with sealing caprocks can provide long-term containment for the injected fluid. Nevertheless, CO2 leakage is a major concern. The presence of abandoned wells penetrating the reservoir caprock may cause leakage flow-paths for CO2 to the overburden. Assessment of time-varying leaky wells is a need. In this paper, we propose a new semi-analytical approach based on pressure-transient analysis to model the behavior of CO2 leakage and corresponding pressure distribution within the storage site and the overburden. Current methods assume instantaneous leakage of CO2 occurring with injection, which is not realistic. In this work, we employ the superposition in time and space to solve the diffusivity equation in 2D radial flow to approximate the transient pressure in the reservoirs. Fluid and rock compressibilities are taken into consideration, which al... [more]

In the projects Smartblades and Smartblades 2 a full-scale 20 m rotor blade for the NREL CART3 wind turbine was designed, built and tested. The rotor blade was intended to have a strong bending−torsion coupling. By means of the experiments, the proof for the technology in question was supposed to be provided. The experimental work was accompanied by simulations. The aim of the paper was to describe and publish a reference finite element model for the 20 m rotor blade. The validation procedure is presented, as are the modelling strategy and the limitations of the model. The finite element model is created using quadratic finite shell elements and quadratic solid elements. Different data sets were used for the validation. First, the data of static test bench experiments were used. The validation comprised the comparison of global displacement and local strain measurements for various flap and edge bending tests and for torsion unit loading tests. Second, the blades’ eigenfrequencies and... [more]

Hydrogen purification is an important part of hydrogen energy utilization. This study aimed to perform hydrogen purification of multi-component gas (H2/CO2/CH4/CO/N2 = 0.79/0.17/0.021/0.012/0.007) by one-column vacuum pressure swing adsorption (VPSA) and pressure swing adsorption (PSA). AC5-KS was selected as the adsorbent for hydrogen purification due to its greater adsorption capacity compared to R2030. Furthermore, VPSA and PSA 10-step cycle models were established to simulate the hydrogen purification process using the Aspen Adsorption platform. The simulation results showed that the hydrogen purification performance of VPSA is better than that of PSA on AC5-KS adsorbent. The effects of feeding time and purging time on hydrogen purity and recovery were also discussed. Results showed that feeding time has a negative effect on hydrogen purity and a positive effect on hydrogen recovery, while purging time has a positive effect on hydrogen purity and a negative effect on hydrogen recov... [more]

The energy-saving requirements for most buildings focus on improving the insulation and airtightness of a building’s envelope. In this paper, the authors have investigated the effect of additional internal insulation on energy consumption for heating and cooling in a residential building. Energy performance analyses were conducted for buildings with four internal thermal insulation systems in three locations using the WUFI Plus software. The Global Cost Method and Simply Pay Back Time have been used to assess and compare the economic viability of the retrofit systems. The results show that, in relation to energy, retrofitting with internal wall insulation can be an alternative to traditional external insulation. The assessment of internal insulation for low-energy buildings, however, cannot be conducted based on economic criteria. The usual approach of Simply Pay Back Time has exceptionally long payback time, which is unacceptable. In turn, the Global Cost Method, can only be used to c... [more]

Increasing converter power density is a problem of topical interest. This paper discusses an interleaved approach of the efficiency increase in the buck-boost stage of an inverter with unfolding circuit in terms of losses in semiconductors, output voltage ripples and power density. Main trends in the power converter development are reviewed. A losses model was designed and used for the proposed solution to find an optimal number of interleaved cells. It describes static and dynamic losses in semiconductor switches for buck and boost mode. The presented calculation results demonstrate the efficiency of the interleaved approach for photovoltaic system. 1 kW power converter prototype was designed with two parallel dc-dc cells for experimental verification of obtained theoretical results. The experimental results confirm theoretical statements.

Some inter-salt shale reservoirs have high oil saturations but the soluble salts in their complex lithology pose considerable challenges to their production. Low-field nuclear magnetic resonance (NMR) has been widely used in evaluating physical properties, fluid characteristics, and fluid saturation of conventional oil and gas reservoirs as well as common shale reservoirs. However, the fluid distribution analysis and fluid saturation calculations in inter-salt shale based on NMR results have not been investigated because of existing technical difficulties. Herein, to explore the fluid distribution patterns and movable oil saturation of the inter-salt shale, a specific experimental scheme was designed which is based on the joint adaptation of multi-state saturation, multi-temperature heating, and NMR measurements. This novel approach was applied to the inter-salt shale core samples from the Qianjiang Sag of the Jianghan Basin in China. The experiments were conducted using two sets of in... [more]

The enrichment of natural gas with hydrogen has been identified as a promising pathway for power-to-gas technology with the potential to reduce emissions while achieving feasible return on investment. The evolving regulatory market in the province of Ontario motivates the analysis of business cases for hydrogen on the industrial microgrid scale. This paper aims to investigate the financial and environmental returns associated with producing and storing electrolytic hydrogen for injection into the natural gas feed of a manufacturer’s combined heat and power plants (CHPs). A mathematical methodology was developed for investigating the optimal operation of the integrated system (power-to-gas along with the current system) by considering hydrogen-enriched natural gas. The result of this simulation is an operation plan that delivers optimal economics and an estimate of greenhouse gas emissions. The simulation was implemented across an entire year for each combination of generation price lim... [more]

This work aimed to estimate the annual methane production from the municipal solid waste disposal sites in Pakistan. In this study, the Intergovernmental Panel on Climate Change (IPCC) default methodology was used to estimate theoretical methane formation potential of the waste disposal sites in major cities of Pakistan. The estimates of this study are based on the last population census conducted in the year 2017 and latest available data regarding the waste generation and management practices in the cities considered in the study. Results showed that 31.18 million tonnes of municipal solid waste (MSW) is generated annually. The top 10 major populated cities in Pakistan (with 20% share in country’s population) contributing 31% share in the total quantity of MSW generated in overall country. On average 50−60% of the MSW generated is collected and openly dumped at the designated waste disposal sites. After analyzing the data, we estimate that annually 12.8 MtCO2-eq of methane is emitted... [more]

Hydro-power plants are able to produce electrical energy in a sustainable way. A known format for producing energy is through generation scheduling, which is a task usually established as a Unit Commitment problem. The challenge in this process is to define the amount of energy that each turbine-generator needs to deliver to the plant, to fulfill the requested electrical dispatch commitment, while coping with the operational restrictions. An optimal generation scheduling for turbine-generators in hydro-power plants can offer a larger amount of energy to be generated with respect to non-optimized schedules, with significantly less water consumption. This work presents an efficient mathematical modelling for generation scheduling in a real hydro-power plant in Brazil. An optimization method based on different versions of the Coral Reefs Optimization algorithm with Substrate Layers (CRO) is proposed as an effective method to tackle this problem. This approach uses different search operato... [more]

This study used the subcritical hydrothermal liquefaction technique (SHLT) in the co- liquefaction of process rejects at a wastepaper-based paper mill (PRWPM) and waste soybean oil (WSO) for the production of biofuels and bio-char material. PRWPM emits complicated waste composed of cellulose, hemicellulose, lignin, and plastic from sealing film. The waste is produced from the recycled paper process of a mill plant located in central Taiwan. The source of WSO is the rejected organic waste from a cooking oil factory located in north Taiwan. PRWPM and WSO are suitable for use as fuels, but due to their high oxygen content, their use as commercial liquid fuels is not frequent, thus making deoxygenation and hydrogenation necessary. The temperature and pressure of SHLT were set at 523−643 K and 40−250 bar, respectively. The experimental conditions included solvent ratios of oil−water, temperature, reaction time, and ratios of solvent to PRWPM. The analysis results contained approximated comp... [more]

Photovoltaic (PV) panels are the most widely used technology for renewable energy production; however, in urban areas, their installation locations are primarily limited to building rooftops. Here, a PV panel design that allows installation on building façades, particularly in elementary school buildings in South Korea, which are widely distributed throughout the country and have a standardized building design, was developed. Elementary schools in Seoul, Gwangju, and Busan were selected, and the energy production efficiency of the PV panels based on latitude and important influencing factors, including installation position, angle, and incoming solar irradiation, were investigated. Further, each targeted elementary school building and the corresponding PV module design were visualized in three dimensions. Thus, solar irradiation was measured, and the potential energy generated by the PV modules was calculated using the Insight software coupled with the Revit software. The building faça... [more]

A flow visualization study was carried out for flow boiling in a rectangular channel filled with and without metallic random porous media. Four main flow patterns are observed as intermittent slug-churn flow, churn-annular flow, annular-mist flow, and mist flow regimes. These flow patterns are clearly classified based on the high-speed images of the channel flow. The results of the flow pattern map according to the mass flow rate were presented using saturation temperatures and the materials of porous media as variables. As the saturation temperatures increased, the annular-mist flow regime occupied a larger area than the lower saturation temperatures condition. Therefore, the churn flow regime is narrower, and the slug flow more quickly turns to annular flow with the increasing vapor quality. The pattern map is not significantly affected by the materials of porous media.

The hybrid electric vehicle is equipped with an internal combustion engine and motor as the driving source, which can solve the problems of short driving range and slow charging of the electric vehicle. Making an effective energy management control strategy can reasonably distribute the output power of the engine and motor, improve engine efficiency, and reduce battery damage. To reduce vehicle energy consumption and excessive battery discharge at the same time, a multi-objective energy management strategy based on a particle swarm optimization algorithm is proposed. First, a simulation platform was built based on a compound power-split vehicle model. Then, the ECMS (Equivalent Consumption Minimization Strategy) was used to realize the real-time control of the model, and the penalty function was added to modify the objective function based on the current SOC (State of Charge) to maintain the SOC balance. Finally, the key parameters of ECMS were optimized by using a particle swarm optim... [more]

Electromagnetic modelling of electrical machines through finite element analysis is an important design tool for detailed studies of high resolution. Through the usage of finite element analysis, one can study the electromagnetic fields for information that is often difficult to acquire in an experimental test bench. The requirement for accurate result is that the magnetic circuit is modelled in a correct way, which may be more difficult to maintain for rare earth free permanent magnets with an operating range that is more likely to be close to non-linear regions for the relation between magnetic flux density and magnetic field strength. In this paper, the inclination angles of the magnetic flux density, magnetic field strength and magnetization are studied and means to reduce the inclination angles are investigated. Both rotating and linear machines are investigated in this paper, with different current densities induced in the stator windings. By proper design of the pole shoes, one... [more]

Doping heteroatoms such as nitrogen (N) and boron (B) into the framework of carbon materials is one of the most efficient methods to improve the electrical performance of carbon-based electrodes. In this study, N-doped carbon has been facilely synthesized using a ZIF-8/polydopamine precursor. The polyhedral structure of ZIF-8 and the effective surface-coating capability of dopamine enabled the formation of N-doped carbon with a hollow structure. The ZIF-8 polyhedron served as a sacrificial template for hollow structures, and dopamine participated as a donor of the nitrogen element. When compared to ZIF-8-derived carbon, the HSNC electrode showed an improved reversible capacity of approximately 1398 mAh·g−1 after 100 cycles, with excellent cycling retention at a voltage range of 0.01 to 3.0 V using a current density of 0.1 A·g−1.

Low frequency oscillations are the most easily occurring dynamic stability problem in the power system. With the increasing capacity of power electronic equipment, the coupling coordination of a synchronous generator and inverter in a low frequency range is worth to be studied further. This paper analyzes the mechanism of the interaction between a normal active/reactive power control grid-connected inverters and power regulation of a synchronous generator. Based on the mechanism, the power system stabilizer built in the inverter is used to increase damping in low frequency range. The small-signal model for electromagnetic torque interaction between the grid-connected inverters and the generator is analyzed first. The small-signal model is the basis for the inverters to provide damping with specific amplitude and phase. The additional damping torque control of the inverters is realized through a built-in power system stabilizer. The fundamentals and the structure of a built-in power sys... [more]

Modern data centers are playing a pivotal role in the global economic situation. Unlike high-quality source of waste heat, it is challenging to recover the decentralized and low-quality waste heat sourced from data centers due to numerous technological and economic hurdles. As such, it is of the utmost importance to explore possible pathways to maximize the energy efficiency of the data centers and to utilize their heat recovery. Absorption chiller systems are a promising technology for the recovery of waste heat at ultra-low temperatures. In fact, the low temperature heat discharged from data centers cannot be retrieved with conventional heat recovery systems. Therefore, the present study investigated feasibility of waste heat recovery from data centers using an absorption chiller system, with the ultimate goal of electrical energy production. To fulfill this objective, a techno-economic assessment of heat recovery using absorption chiller (AC) technique for the data centers with powe... [more]

The paper reports the results of a study into a method of estimating the level of power/energy reduction needed for pumping highly viscous hydrophobic liquids. The effect of reducing the flow resistance resulting from feeding an adequate volume of water into the flow tube is considered. The polar parameters of water selected for analysis are different than oil. Experimental studies were not carried out in this regard, since the commonly accessible equation expressing the resistance of two-phase liquid−liquid flow was utilized to develop the method discussed in this study. On its basis, simulations were carried out to determine the conditions and level of reduction of the two-phase flow resistance in comparison to the single-phase flow resistance of a highly viscous oily liquid. The analysis of the results provided means for determination of such ranges of variations in the flow parameters of the two-phase liquid−liquid system, in which the total power of pumps applied to pump both liqu... [more]

The production of renewable energy fluctuates in terms of sun and wind and must be supplemented by storage in the system. On an individual basis, i.e., for centralized electricity production and predominantly self-consumption, the use of batteries is considered here. Possible future development scenarios were simulated based on current price relationships (status quo). In the status quo, a selling price for PV electricity of 13 Euro cents (ct)ct/kWh was assumed with a production cost of 11 ct/kWh. The selling price of wind power is 5 ct/kWh with a production cost of 3 ct/kWh. The cost of storing electricity in a battery increases the price by 33 ct/kWh. A price of 20 ct/kWh is assumed for electricity purchases by companies. In the status quo, the use of batteries is not economical given the assumed price relationships. Changing the framework conditions, such as those of the legislature in Germany with the nuclear power phase-out and in the EU with the coal exit and decarbonization, wil... [more]