Due to the rapid growth in the amount of wind energy connected to distribution grids, they are exposed to higher network constraints, which poses additional challenges to system operation. Based on regulation, the system operator has the right to curtail wind energy in order to avoid any violation of system constraints. Energy storage systems (ESS) are considered to be a viable solution to solve this problem. The aim of this paper is to provide the best locations of both ESS and wind power by optimizing distribution system costs taking into account network constraints and the uncertainty associated to the nature of wind, load and price. To do that, we use a mixed integer linear programming (MILP) approach consisting of loss reduction, voltage improvement and minimization of generation costs. An alternative current (AC) linear optimal power flow (OPF), which employs binary variables to define the location of the generation, is implemented. The proposed stochastic MILP approach has been... [more]

Concerns about climate change and food productivity have spurred interest in biochar, a form of charred organic material typically used in agriculture to improve soil productivity and as a means of carbon sequestration. An innovative approach in agriculture is the use of agro-forestry waste for the production of soil fertilisers for agricultural purposes and as a source of energy. A common agricultural practice is to burn crop residues in the field to produce ashes that can be used as soil fertilisers. This approach is able to supply plants with certain nutrients, such as Ca, K, Mg, Na, B, S, and Mo. However, the low concentration of N and P in the ashes, together with the occasional presence of heavy metals (Ni, Pb, Cd, Se, Al, etc.), has a negative effect on soil and, therefore, crop productivity. This work describes the opportunity to create an innovative supply chain from agricultural waste biomass. Olive (Olea europaea) and hazelnut (Corylus avellana) pruning residues represent a... [more]

Ball milling is investigated as a method of reducing the leaching concentration (often termed stablilization) of heavy metals in municipal solid waste incineration (MSWI) fly ash. Three heavy metals (Cu, Cr, Pb) loose much of their solubility in leachate by treating fly ash in a planetary ball mill, in which collisions between balls and fly ash drive various physical processes, as well as chemical reactions. The efficiency of stabilization is evaluated by analysing heavy metals in the leachable fraction from treated fly ash. Ball milling reduces the leaching concentration of Cu, Cr, and Pb, and water washing effectively promotes stabilization efficiency by removing soluble salts. Size distribution and morphology of particles were analysed by laser particle diameter analysis and scanning electron microscopy. X-ray diffraction analysis reveals significant reduction of the crystallinity of fly ash by milling. Fly ash particles can be activated through this ball milling, leading to a signi... [more]

According to the monitoring of the wide area measurement system, inter-area oscillations happen more and more frequently in a real power grid of China, which are close to the forced oscillation. Applying the conventional forced oscillation theory, the mechanism of these oscillations cannot be explained well, because the oscillations vary with random amplitude and a narrow frequency band. To explain the mechanism of such oscillations, the general forced oscillation (GFO) mechanism is taken into consideration. The GFO is the power system oscillation excited by the random excitations, such as power fluctuations from renewable power generation. Firstly, properties of the oscillations observed in the real power grid are analyzed. Using the GFO mechanism, the observed oscillations seem to be the GFO caused by some random excitation. Then the variation of the wind power measured in this power gird is found to be the random excitation which may cause the GFO phenomenon. Finally, simulations ar... [more]

With the increasing permeability of photovoltaic (PV) power production, the uncertainties and randomness of PV power have played a critical role in the operation and dispatch of the power grid and amplified the abandon rate of PV power. Consequently, the accuracy of PV power forecast urgently needs to be improved. Based on the amplitude and fluctuation characteristics of the PV power forecast error, a short-term PV output forecast method that considers the error calibration is proposed. Firstly, typical climate categories are defined to classify the historical PV power data. On the one hand, due to the non-negligible diversity of error amplitudes in different categories, the probability density distributions of relative error (RE) are generated for each category. Distribution fitting is performed to simulate probability density function (PDF) curves, and the RE samples are drawn from the fitted curves to obtain the sampling values of the RE. On the other hand, based on the fluctuation... [more]

Improving energy efficiency in public buildings is one of the main challenges for a sustainable requalification of energy issues and a consequent reduction of greenhouse gas (GHG) emissions. This paper aims to provide preliminary information about economic costs and energy consumption reductions (benefits) of some considered interventions in existing public buildings. Methods include an analysis of some feasible interventions in four selected public buildings. Energy efficiency improvements have been assessed for each feasible intervention. The difference of the building global energy performance index (EPgl) has been assessed before and after each intervention. Economic costs of each intervention have been estimated by averaging the amount demanded by different companies for the same intervention. Results obtained show economic costs and the EPgl percentage improvement for each intervention, highlighting and allowing for the comparison of energy consumption reduction and relative econ... [more]

An experimental study was performed to investigate the effect of subcritical carbon dioxide (CO₂) adsorption on mechanical properties of shales with different coring directions. Uniaxial compressive strength (UCS) tests were conducted on shale samples with different CO₂ adsorption time at a pressure of 7 MPa and a temperature of 40 °C. The crack propagation and the failure mechanism of shale samples were recorded by using acoustic emission (AE) sensors together with ARAMIS technology. According to the results, samples with parallel and normal bedding angles present reductions of 26.7% and 3.0% in UCS, 30.7% and 36.7% in Young’s modulus after 10 days’ adsorption of CO₂, and 30.3% and 18.4% in UCS, 13.8% and 22.6% in Young’s modulus after 20 days’ adsorption of CO₂. Samples with a normal bedding angle presented higher brittleness index than that with a parallel bedding angle. The strain distributions show that longer CO₂ adsorption will cause higher axial strains and lateral strains. The... [more]

A novel converter that can directly transform electrical, wind, hydraulic and other types of mechanical energy into thermal energy is presented in this study. First, the thermal energy of the converter is classified and then calculated by a finite element method. The eddy current distribution in the stator of the converter is also discussed. Second, the temperature field of the converter is calculated using a boundary element method. Subsequently, a thermal power⁻temperature coupled calculation method is presented to calculate the actual thermal power and temperature of the converter. The characteristic curves of the actual thermal power and the increase in water flow temperature are then presented based on the calculation results. Lastly, an experimental system is built, the thermal power and temperature of the converter are measured and the experimental results and the analytical calculations are compared.

Aiming at the fact that large-scale penetration of wind power will to some extent weaken the small signal stability of power systems, in this paper, the dynamic model of a doubly fed induction generator (DFIG) is established firstly, to analyze the impact of wind generation on power oscillation damping. Then, based on the conventional maximum power point tracking control of variable speed wind turbine, a supplementary control scheme is proposed to increase the damping of power system. To achieve best performance, parameters of the damping control are tuned by using a genetic algorithm. Results of eigenvalue analysis and simulations demonstrate the effectiveness of supplementary damping control with fixed wind speed. At last, due to the problem that fluctuation of output power of wind generators would cause the unstable performance of the DFIG damping controller above, a new algorithm that adapts to the wind variation is added to the supplementary damping control scheme. Results of the... [more]

Utilization of hydraulic-fracturing technology is dramatically increasing in exploitation of natural gas extraction. However the prediction of the configuration of propagated hydraulic fracture is extremely challenging. This paper presents a numerical method of obtaining the configuration of the propagated hydraulic fracture into discrete natural fracture network system. The method is developed on the basis of weighted fracture which is derived in combination of Dijkstra’s algorithm energy theory and vector method. Numerical results along with experimental data demonstrated that proposed method is capable of predicting the propagated hydraulic fracture configuration reasonably with high computation efficiency. Sensitivity analysis reveals a number of interesting observation results: the shortest path weight value decreases with increasing of fracture density and length, and increases with increasing of the angle between fractures to the maximum principal stress direction. Our method is... [more]

In this paper, we address the problem of real-time fault detection in wind turbines. Starting from a data-driven fault detection method, the contribution of this paper is twofold. First, a sensor selection algorithm is proposed with the goal to reduce the computational effort of the fault detection method. Second, an analysis is performed to reduce the data acquisition time needed by the fault detection method, that is, with the goal of reducing the fault detection time. The proposed methods are tested in a benchmark wind turbine where different actuator and sensor failures are simulated. The results demonstrate the performance and effectiveness of the proposed algorithms that dramatically reduce the number of sensors and the fault detection time.

This paper presents the control strategies for a novel dual-stator flux-modulated (DSFM) motor for application in electric vehicles (EVs). The DSFM motor can be applied to EVs because of its simple winding structure, high reliability, and its use of two stators and rotating modulation steels in the air gap. Moreover, it outperforms conventional brushless doubly-fed machines in terms of control performance. Two stator-current-oriented vector controls with different excitation in the primary winding, direct and alternating current excitation, are designed, simulated, and evaluated on a custom-made DSFM prototype allowing the decoupled control of torque. The stable speed response and available current characteristics strongly validate the feasibility of the two control methods. Furthermore, the proposed control methods can be employed in other applications of flux-modulated motors.

Information technologies (IT) currently represent 2% of CO₂ emissions. In recent years, a wide variety of IT solutions have been proposed, focused on increasing the energy efficiency of network data centers. Monitoring is one of the fundamental pillars of these systems, providing the information necessary for adequate decision making. However, today’s monitoring systems (MSs) are partial, specific and highly coupled solutions. This study proposes a model for monitoring data centers that serves as a basis for energy saving systems, offered as a value-added service embedded in a device with low cost and power consumption. The proposal is general in nature, comprehensive, scalable and focused on heterogeneous environments, and it allows quick adaptation to the needs of changing and dynamic environments. Further, a prototype of the system has been implemented in several devices, which has allowed validation of the proposal in addition to identification of the minimum hardware profile requi... [more]

In this paper, power loss and cost models of power electronic converters based on converter ratings and datasheet information are presented. These models aid in creating rapid prototypes which facilitate the component selection process. Through rapid prototyping, users can estimate power loss and cost which are essential in design decisions. The proposed approach treats main power electronic components of a converter as building blocks that can be arranged to obtain multiple topologies to facilitate rapid prototyping. In order to get system-level power loss and cost models, two processes are implemented. The first process automatically provides minimum power loss or cost estimates and identifies components for specific applications and ratings; the second process estimates power losses and costs of each component of interest as well as the whole system. Two examples are used to illustrate the proposed approaches—boost and buck converters in continuous conduction mode. Achieved cost and... [more]

High-pressure hydraulic fracturing technology in coal and coal bed methane mines can lead to roof and floor damage, and fracture initiation disorder that leads to a “blank area”, and other issues. A new method of hydraulic fracturing is proposed to increase the homogeneous permeability of coal in underground coalmines. Numerical and other simulation tests for different forms of a tree-type, branched borehole model are presented. The results show that the branched array causes cracks to initiate from the bottom of the array, and these extend along the direction of the adjacent boreholes. Generally, as the number of branched boreholes increases, the coal seam fracture network also increase, improving the distribution of the fracture network, making the fracturing effect better. The branched boreholes appear to reduce initiation pressure and, with increasing branches, the initiation pressure decreases. A model with four tree-type, branched boreholes leads to a reduction in initiation pres... [more]

Control of wave energy converters (WECs) has been very often limited to hydrodynamic control to absorb the maximum energy possible from ocean waves. This generally ignores or significantly simplifies the performance of real power take-off (PTO) systems. However, including all the required dynamics and constraints in the control problem may considerably vary the control strategy and the power output. Therefore, this paper considers the incorporation into the model of all the conversion stages from ocean waves to the electricity network, referred to as wave-to-wire (W2W) models, and identifies the necessary components and their dynamics and constraints, including grid constraints. In addition, the paper identifies different control inputs for the different components of the PTO system and how these inputs are articulated to the dynamics of the system. Examples of pneumatic, hydraulic, mechanical or magnetic transmission systems driving a rotary electrical generator, and linear electric g... [more]

The laminar combustion characteristics of blends of isooctane and C1⁻C5 primary alcohols (i.e., methanol, ethanol, n-propanol, n-butanol and n-pentanol) were investigated using the spherical expanding flame methodology in a constant volume chamber at various equivalence ratios and volume fractions of alcohol. The stretch effect was removed using the nonlinear methodology. The results indicate that the laminar flame speeds of alcohol-isooctane blends increase monotonously with the increasing volume fraction of alcohol. Among the five alcohols, the addition of methanol is identified to be the most effective in enhancing laminar flame speed. The addition of ethanol results in an approximately equivalent laminar flame speed enhancement rate as those of n-propanol, n-butanol and n-pentanol at ratios of 0.8 and 1.5, and a higher rate at 1.0 and 1.2. An empirical correlation is provided to describe the laminar flame speed variation with the volume fraction of alcohol. Meanwhile, the laminar f... [more]

Two modeling approaches, the scaling-law and CFD (Computational Fluid Dynamics) approaches, are presented in this paper. To save on experimental cost of the pilot plant, the scaling-law approach as a low-computational-cost method was adopted and a small scale column operating under ambient temperature and pressure was built. A series of laboratory tests and computer simulations were carried out to evaluate the hydrodynamic characteristics of a pilot fluidized-bed biomass gasifier. In the small scale column solids were fluidized. The pressure and other hydrodynamic properties were monitored for the validation of the scaling-law application. In addition to the scaling-law modeling method, the CFD approach was presented to simulate the gas-particle system in the small column. 2D CFD models were developed to simulate the hydrodynamic regime. The simulation results were validated with the experimental data from the small column. It was proved that the CFD model was able to accurately predic... [more]

This study presents an inductive power transfer (IPT) system for electric vehicles (EVs) based on EE-shaped ferrite cores. The issues of the IPT system such as efficiency, air gap, displacement, dislocation, and motion are discussed. Furthermore, finite element analysis software is utilized to simulate the IPT system operated under large air gap conditions. Simulation and measurement results are presented to validate the performance of the proposed scheme and meet the requirements for bus-stop-powered EVs.

Zinc porphyrins decorated with three p-carboxyphenyl anchoring groups and various “push” substituents of varied electron-donating strengths were prepared in good yields by facile and straightforward ways. The effect of electron-donating strength of the donor molecules on the overall power conversion efficiency was evaluated with the help of photophysical, electrochemical, photovoltaic spectroscopy and quantum chemical calculations. It is observed from the photophysical and Infrared (IR) spectroscopic data that multi-anchoring dyes are more stable and bind more strongly to the TiO₂ surface than their one-anchor counterparts. The properties like a three-step synthesis, high overall yields, possible mass production on a gram-scale and strong binding affinities with TiO₂ surfaces make them a suitable choice for commercial applications. Zn₁NH₃A, with electron donating and anti-aggregation characteristics, achieved the highest efficiency of 6.50%.

Plasma properties can be useful in a wide spectrum of applications. Experimental projects on controlled nuclear fusion are the most challenging of these applications and, at the same time, the best way to approach plasma science. Since nuclear fusion reactors can ensure a large-scale, safe, environmentally-friendly and virtually inexhaustible source of energy, several fusion-oriented megaprojects and innovative companies are appearing all over the world. PROTO-SPHERA (Spherical Plasma for HElicity Relaxation Assessment) is the first plasma project with a simply connected configuration, namely not requiring additional objects inside the plasma volume. This is obtained by a plasma arc, shaped as a screw pinch, acting as the centerpost of a spherical torus with minimal aspect ratio. Due to its intrinsic physical, engineering and economic advantages, this new approach is attractive also on an industrial scale and with several developments that still needs to be explored. This paper present... [more]

The capacity factor of a power plant is the ratio of generation over its potential generation. It is an important measure to describe wind and solar resources. However, the fluctuating nature of renewable power generation makes it difficult to integrate all generation at times. Whenever generation exceeds the load, curtailment or storage of energy is required. With increasing renewable shares in the power system, the level of curtailment will further increase. In this work, the influence of the curtailment on the capacity factors for a highly renewable German power system is studied. An effective capacity factor is introduced, and the implications for the distribution of renewable power plants are discussed. Three years of highly-resolved weather data were used to model wind and solar power generation. Together with historical load data and a transmission model, a possible future German power system was simulated. It is shown that effective capacity factors for unlimited transmission a... [more]

Microgrids (MGs) are presented as a cornerstone of smart grids. With the potential to integrate intermittent renewable energy sources (RES) in a flexible and environmental way, the MG concept has gained even more attention. Due to the randomness of RES, load, and electricity price in MG, the forecast errors of MGs will affect the performance of the power scheduling and the operating cost of an MG. In this paper, a combined stochastic programming and receding horizon control (SPRHC) strategy is proposed for microgrid energy management under uncertainty, which combines the advantages of two-stage stochastic programming (SP) and receding horizon control (RHC) strategy. With an SP strategy, a scheduling plan can be derived that minimizes the risk of uncertainty by involving the uncertainty of MG in the optimization model. With an RHC strategy, the uncertainty within the MG can be further compensated through a feedback mechanism with the lately updated forecast information. In our approach,... [more]

The Velenje coal mine (VCM) is situated on the largest Slovenian coal deposit and in one of the thickest layers of coal known in the world. The thickness of the coal layer causes problems for the efficiency of extraction, since the majority of mining operations is within the coal layer. The selected longwall coal mining method with specific geometry, increasing depth of excavations, changes in stress state and naturally given geomechanical properties of rocks induce seismic events. Induced seismic events can be caused by caving processes, blasting or bursts of coal or the surrounding rock. For 2.5D visualization, data of excavations, ash content and calorific value of coal samples, hanging wall and footwall occurrence, subsidence of the surface and coal burst source locations were collected. Data and interpolation methods available in software package Surfer®12 were statistically analyzed and a Kriging (KRG) interpolation method was chosen. As a result 2.5D visualizations of coal burst... [more]

Climate change policy and sustainable development issues and goals are closely intertwined. Recognizing the dual relationship between sustainable development and climate change points to a need for the exploration of actions that jointly address sustainable development and climate change. Technology transfer is considered an issue with growing interest worldwide and has been recognized as the key in supporting countries to achieve sustainable development, while addressing climate change challenges. This study presents an integrated decision support methodological framework for the formulation and evaluation of activities to promote technology transfer, as well as the provision of clear recommendations and strategies for framing specific policy in the context of climate change. The philosophy of the proposed approach, under the name: assess-identify-define (AID), consists of three components, where each one focuses on a particular problem. The methodology is integrated using appropriate... [more]