This study considers the motion responses of heaving point absorbers (HPAs) connected to large semi-submersibles. To analyze the motion responses for HPAs, a motion response amplitude operator (RAO) of a single HPA connected to a fixed wall was obtained in a two-dimensional wave flume. A frequency-domain eigenvalue analysis is used to evaluate the motion RAO of a single HPA, and the experimental and numerical results of motion RAO were compared. A model test was conducted to analyze the motions of multiple HPAs connected to a large semi-submersible in a 3D ocean basin. The motion RAOs of the multiple HPAs connected to the large semi-submersible were compared with the motion RAO of the single HPA connected to the fixed wall.

Optimising an existing production plant is a challenging task for companies. Necessary physical test runs disturb running production processes. Simulation models are one opportunity to limit these physical test runs. This is particularly important since today’s fast and intelligent networking opportunities in production systems are in line with the call of Industry 4.0 for substantial and frequent changes. Creating simulation models for those systems requires high effort and in-depth knowledge of production processes. In the current literature, digital twins promise several advantages for production optimisation and can be used to simulate production systems, which reduce necessary physical test runs and related costs. While most companies are not able to create digital twins yet, companies using enterprise resource planning (ERP) systems have the general capability to create digital shadows. This paper presents a concept and a case study for a generic simulation of production systems... [more]

This paper explores the potential use of conductive alginate capsules encapsulating a bitumen rejuvenator as a new extrinsic self-healing asphalt method. The capsules combine two existing self-healing asphalt technologies: (1) rejuvenator encapsulation and (2) induction heating to create a self-healing system that will provide rapid and effective asphalt pavement repair. The work presents a proof of concept for the encapsulation process, which involves embedding the capsules into the bitumen mortar mixture and the survival rate of the capsules in the asphalt mixture. A drip capsule production process was adopted and scaled up to the production of 20l wet capsules at rate of 0.22 l/min. To prove the effectiveness and its ability to survive asphalt production process, the capsules were prepared and subjected to thermogravimetric analysis (TGA) and uniaxial compression Test (UCT). The test results demonstrated that the capsules had suitable thermal characteristics and mechanical strength... [more]

Enzymatic hydrolysis of cellulose-containing raw materials, using Aspergillus niger, were studied. Filter paper, secondary cellulose-containing or starch-containing raw materials, miscanthus cellulose after alkaline or acid pretreatment, and wood chip cellulose, were used as substrates. The study focused on a wild A. niger strain, treated, or not (control), by ultraviolet (UV) irradiations for 45, 60, or 120 min (UV45, UV60, or UV120), or by UV irradiation for 120 min followed by a chemical treatment with NaN3 + ItBr for 30 min or 80 min (UV120 + CH30 or UV120 + CH80). A mixture of all the A. niger strains (MIX) was also tested. A citrate buffer, at 50 mM, wasthe most suitable for enzymatic hydrolysis. As the UV exposure time increased to 2 h, the cellulase activity of the surviving culturewas increased (r = 0.706; p < 0.05). The enzymatic activities of the obtained strains, towards miscanthus cellulose, wood chips, and filter paper, were inferior to those obtained with commercial e... [more]

The traditional perturbation and observation (P&O) maximum power point tracking (MPPT) algorithm of a structure is simple and low-cost. However, the P&O algorithm is prone to divergence under solar radiation when the latter varies rapidly and the P&O algorithm cannot track the maximum power point (MPP) under partial shading conditions (PSCs). This study proposes an algorithm from the P&O algorithm combined with the solar radiation value detection scheme, where the solar radiation value detection is based on the solar photovoltaic (SPV) module equivalent conductance threshold control (CTC). While the proposed algorithm can immediately judge solar radiation, it also has suitable control strategies to achieve the high efficiency of MPPT especially for the rapid change in solar radiation and PSCs. In the actual test of the proposed algorithm and the P&O algorithm, the MPPT efficiency of the proposed algorithm could reach 99% under solar radiation, which varies rapidly, and under PSCs. Howe... [more]

The objective of this paper was to create a mathematical model of vacuum drops in a form that enables the testing of the impact of design parameters of a milking cluster on the values of vacuum drops in the claw. Simulation tests of the milking cluster were conducted, with the use of a simplified model of vacuum drops in the form of a fourth-degree polynomial. Sensitivity analysis and a simulation of a model with a simplified structure of vacuum drops in the claw were carried out. As a result, the impact of the milking machine’s design parameters on the milking process could be analysed. The results showed that a change in the local loss and linear drag coefficient in the long milk duct will have a lower impact on vacuum drops if a smaller flux of inlet air, a higher head of the air/liquid mix, and a higher diameter of the long milk tube are used.

The dairy farm and on-farm production processes are the subject of numerous evaluations. These are not only evaluations of the economic efficiency of milk production. Opinions expressed by various social groups are also an important contribution to improving the approach to milk production on the farm. As a result of such opinions, a vision of an ideal dairy farm may be formed. The aim of the study was to develop the thematic area of an ideal dairy farm in the opinion of two groups of students who were learning remotely (in the distance learning system) due to the Covid-19 pandemic. The first group consisted of six Erasmus+ students. The second group consisted of 70 full-time Polish students. As part of their homework, the students answered three questions about the ideal dairy farm. Students had 4 weeks to do their homework. Erasmus+ students’ homework was used to propose a ranking method for assessing the answers to three questions by the students themselves. Homework of Polish stude... [more]

A vast majority of heat exchangers suffer from unwanted deposition of material on the surface, which severely inhibits their performance and thus marks one of the biggest challenges in heat transfer. Despite numerous scientific investigations, prediction and prevention of fouling remain unresolved issues in process engineering and are responsible for large economic losses and environmental damage. This review article focuses specifically on crystallization fouling, providing a comprehensive overview of the state-of-the-art of fouling in heat exchangers. The fundamentals of the topic are discussed, as the term fouling resistance is introduced along with distinct fouling behaviour, observed in laboratory and industrial environments. Insight into subsequent phases of the fouling process is provided, along with the accompanying microscale events. Furthermore, the effects of fluid composition, temperature, flow velocity, surface condition, nucleate boiling and composite fouling are comprehe... [more]

In this study, the response surface methodology (RSM) optimization technique was employed for investigating the impact of hydroxy gas (HHO) enriched diesel on performance, acoustics, smoke and exhaust gas emissions of the compression ignition (CI) engine. The engine was operated within the HHO flow rate range of 0−10 L/min and engine loads of 15%, 30%, 45%, 60% and 75%. The results disclosed that HHO concentration and engine load had a substantial influence on the response variables. Analysis of variance (ANOVA) results of developed quadratic models indicated the appropriate fit for all models. Moreover, the optimization of the user-defined historical design of an experiment identified an optimum HHO flow rate of 8 L/min and 41% engine load, with composite desirability of 0.733. The responses corresponding to optimal study factors were 25.44%, 0.315 kg/kWh, 117.73 ppm, 140.87 ppm, 99.37 dB, and 1.97% for brake thermal efficiency (BTE), brake specific fuel consumption (BSFC), CO, HC, no... [more]

The Kenics static mixer is one of the most widely studied static mixers, whose structure−function relationship has been studied by varying its aspect ratio and modifying the surface. However, the effect of the symmetric structure of the Kenics static mixer itself on twisting the fluid has been neglected. In order to study how the symmetrical structure of the Kenics static mixer impacts the fluid flow, we changed the center position of elements at twist angle 90° and introduced the eccentricity factor γ. We applied LHS-PLS to study this non-standard Kenics static mixer and obtained the statistical correlations of the aspect ratio, Reynolds number, and eccentricity factor on relative Nusselt number and relative friction factor. We analyzed the results by comparing the PLS model with the univariate analysis, and it was found that the underlying logic of the Kenics static mixer with an asymmetric structure became different. In addition, a non-standard Kenics static mixer with an asymmetric... [more]

Oxygen is a harmful substance in many processes because it can bring out corrosion and oxidation of food. This study aimed to enhance the removal of dissolved oxygen (DO) from water by employing a novel rotor−stator reactor (RSR). The effectiveness of the nitrogen stripping coupled with vacuum degassing technique for the removal of DO from water in the RSR was investigated. The deoxygenation efficiency (η) and the mass transfer coefficient (KLa) were determined under various operating conditions for the rotational speed, liquid volumetric flow rate, gas volumetric flow rate, and vacuum degree. The nitrogen stripping coupled with vacuum degassing technique achieved values for η and KLa of 97.34% and 0.0882 s−1, respectively, which are much higher than those achieved with the vacuum degassing technique alone (η = 89.95% and KLa = 0.0585 s−1). A correlation to predict the KLa was established and the predicted KLa values were in agreement with the experimental values, with deviations gener... [more]

In this study, the impact of nanofluid use in solar-thermoelectric generators (Solar-TEG) on thermal performance is investigated through analysis and simulation methodology. For conventional cooling analysis, we use air as a coolant and graphene nanoplatelet aqueous nanofluids (GNAN) for nanofluid cooling. We make a comparison between traditional and nanofluid cooling to find the best performance. GNAN at a dispersion of 0.025, 0.05, 0.075, and 0.1-wt% are added to the cooling system. GNAN has been used in the technological development of energy conversion. It has been proposed as a material to achieve better efficiency in Solar-TEG. Five different geometries are developed to analyze the efficiency in a Solar-TEG to find the optimal design. The impact of the thermal concentration relationship, substrate area, and convective transfer coefficient on Solar-TEG performance is investigated. To simplify and speed up simulations, we use equivalent models based on FEM. We are considering the p... [more]

A centralized bioenergy unit was simulated, focusing on optimizing the manure transport chain, installing a centralized biogas plant, operation costs of the process, biogas upgrading, organic fertilizer production, and economic analyses. Comarca Lagunera from northeast Mexico was chosen as a study zone due to the existing number of dairy farms and livestock population (64,000 cattle heads). Two scenarios were analyzed: The first centralized scenario consisted of selecting one unique location for the anaerobic digesters for the 16 farms; the second decentralized scenario consisted of distributing the anaerobic digesters in three locations. Optimal locations were determined using mathematical modeling. The bioenergy unit was designed to process 1600 t/day of dairy manure. Results indicated that biomethane production was a more profitable option than generating electricity with non-purified methane. The amount of biomethane production was 58,756 m3/day. Economic analysis for centralized b... [more]

, native to the Arabian Peninsula, is traditionally used to cure skin infections. The objective is to screen the phytochemical content and antimicrobial activity of aqueous, methanol and 80% methanol extracts of aerial parts of R. epapposum. The phytochemical screening of aqueous, methanolic, and 80% methanol extracts of R. epapposum was conducted using gas chromatographymass spectrometry. The antimicrobial activities of the extracts were assessed by well diffusion and microdilution methods. Qualitative phytochemical analysis revealed the presence of 2-methoxy-4-vinylphenol in all three extracts, whereas ethanol, 2-methoxy-, acetate; n-hexadecanoic acid; and 2,3-butanediol are present in higher amount exclusively in the methanol, 80% methanol and aqueous extracts of the aerial parts of R. epapposum, respectively. The highest antibacterial activity was shown by the aqueous extract S. aureus, P. aeruginosa, E. cloacae, and K. pneumoniae, methanolic extract against S. aureus, methicillin-... [more]

In this research work, MFe2O4/CNS was prepared using the hydrothermal−microwave method. The influence of cations (M) toward functional groups of composites and their performance in pesticide degradation were studied. Rice husk was pyrolyzed hydrothermally (200 °C, 6 h) and by microwave (800 W, 40 min). Each product was mixed with MCl2 (Zn, Ni, Mn), FeCl3, KOH, and water, and calcined (600 °C, 15 min) to obtain a composite. Characterization by XRD confirmed the MFe2O4/CNS structure. The FTIR spectra of the composites showed different band sharpness related to C-O and M-O. A mixture of dried paddy farm soil, composite, BPMC (buthylphenylmethyl carbamate) pesticide solution (0.25%), and H2O2 solution (0.15%) was kept under dark conditions for 48 h. The solution above the soil was filtered and measured with a UV-Vis spectrophotometer at 217 nm. Applications without the composite and composite−H2O2 were also conducted. The results reveal that dark BPMC degradation with the composite was 7.5... [more]

Biogas is a significant by-product produced in algae processing and may be used for many different applications, not only as a renewable energy carrier but also as a chemical intermediate in integrated algae-based biorefineries. In this work, the reforming of biogas to H2/CO2 mixtures (referred to as SynFeed) as feed for the direct hydrogenation of CO2 to methanol is investigated. Two conventional processes, namely steam methane and autothermal reforming, with upstream CO2 separation from raw biogas are compared to novel concepts of direct biogas bi- and tri-reforming. In addition, downstream CO2 separation from SynFeed using the commercial Selexol process to produce pure H2 and CO2 is considered. The results show that upstream CO2 separation with subsequent steam methane reforming is the most economic process, costing 142.48 €/tSynFeed, and taking into consideration the revenue from excess hydrogen. Bi-reforming is the most expensive process, with a cost of 413.44 €/tSynFeed, due to t... [more]

The dynamic simulation of the continuous catalytic reforming process is of great significance to the performance prediction and optimization of the entire process. In this study, a 34-lumped mechanism model described by differential algebra was established based on the actual process conditions of the continuous catalytic reforming process in China, and an efficient dynamic simulation solution method based on simultaneous equations was proposed. First, a 34-lumped differential−algebraic mechanism model was established based on the basic principles of reforming kinetics, thermodynamics, material balance, and energy balance. Secondly, in order to solve and simulate the mechanism model composed of 144 differential equations and several algebraic equations, the method of finite-element collocation is used to discretize the differential equations and convert them into large-scale, nonlinear programming problems, and the interior point algorithm is used to estimate its parameters and verify... [more]

This research paper evaluates hydrothermal carbonization (HTC) as a possible treatment for sewage sludge, including phosphorus recycling. German governmental requirements force a high number of wastewater treatment plants (WWTP) to recover phosphorus from sewage sludge above limits of 20 g kgTS−1 before further disposal (e.g., co-incineration). The results show that pH reduction has a positive effect on shifting phosphorus to the liquid phase during HTC. Although the experimental results of this research do not yet achieve the necessary phosphorus reduction, various calculations are made to achieve this goal in future experimental studies. In order to be able to assess the energy benefits of HTC, Aspen Plus modeling was used to show the positive impact of implementing this technology in a WWTP. It is shown that the mechanical dewaterability of sewage sludge (SS) increases after HTC enabling energy savings by means of subsequent thermal drying. A heat optimized HTC is able to cut energy... [more]

Formation of a dispersed oil—water flow pattern is a common occurrence in flow lines and pipelines. The capability of predicting the size of droplets, as well as the distribution of dispersed phase volume fraction is of utmost importance for proper design of such systems. The present study aims at modelling dispersed water in oil flows in a horizontal pipe by employing a multi-fluid Eulerian approach along with the population balance model. To this end, momentum and continuity equations are solved for oil and water phases, and the coupling between the phases is achieved by considering the drag, lift, turbulent dispersion, and virtual mass forces. Turbulent effects are modelled by employing the standard k-ε model. Furthermore, a population balance model, based on the method of class, along with the breakup and coalescence kernels is adopted for modelling the droplet size distribution. The obtained numerical results are compared to the experimental data in literature for either the in si... [more]

Cancer incidence and mortality rate are growing worldwide. The effectiveness of cancer therapy depends on the degree of cancer development. Anticancer prevention, screening tests, detection of precancerous conditions or cancers at an early stage of development help to prevent the development of cancer, and in the event of cancer development, they provide the best chance for a full recovery. However, in most cases of advanced cancer, there is no method that can fully cure this disease. Recently, natural products have gained more attention in cancer therapy. Panax ginseng (PG), one of the most popular natural products, is reported to have a wide range of pharmacological activities in cancer. Therefore, the anti-cancer effects and mechanisms of PG and its metabolites (compound K, Ginsenoside Rh1, Rh2, Rh3 and F1) in five major cancers (lung cancer, breast cancer, colon cancer, prostate cancer and stomach cancer) are reviewed in this study. It is confirmed that PG and its metabolites regul... [more]

In view of the current status of catalytic cracking flue gas treatment, it is necessary to study the flow environment of desulfurization ash particles, which are a type of Geldart C particle, in a circulating fluidized bed (CFB) for semi-dry flue gas desulphurization using CFB technology. This study investigated the flow characteristics of desulphurization ash particles in a riser with an inner diameter of 70 mm and a height of 12.6 m, at a gas velocity of 4−7 m/s and a solids circulation rate of 15−45 kg/m2·s. The solids holdup in the axial distribution is relatively high near the bottom of the riser, and gradually decreases as the riser height increases, with a stable value from the middle to the top of the riser. In the radial distribution, the solids holdup of desulfurization ash particles is low in the center and high in the wall region. Within the above operating conditions, the solids holdup ranges from 0.008 to 0.025. The particle-based Archimedes number has a linear relationsh... [more]

Researchers must read and understand a large volume of technical papers, including patent documents, to fully grasp the state-of-the-art technological progress in a given domain. Chemical research is particularly challenging with the fast growth of newly registered utility patents (also known as intellectual property or IP) that provide detailed descriptions of the processes used to create a new chemical or a new process to manufacture a known chemical. The researcher must be able to understand the latest patents and literature in order to develop new chemicals and processes that do not infringe on existing claims and processes. This research uses text mining, integrated machine learning, and knowledge visualization techniques to effectively and accurately support the extraction and graphical presentation of chemical processes disclosed in patent documents. The computer framework trains a machine learning model called ALBERT for automatic paragraph text classification. ALBERT separates... [more]

To prevent microbial growth, chemical solvents are typically utilized. However, chemical solvents are hazardous to human health with low antimicrobial effects. Metallic-element (such as copper, silver, and gold) nanoparticles have many applications in biotechnology and biomedicine. Copper nanoparticles (CuNPs) are efficient owing to their antimicrobial, anti-inflammatory, and anti-proliferative properties. The objective of this study was to perform biogenic synthesis of copper nanoparticles using three different spices (star anise, seed of Illicium verum; nutmeg, seed of Myristica fragrans; and mace, membrane covering the seed of Myristica fragrans) and determine their antibacterial properties. CuNPs of spices were prepared by dissolving copper sulfate in the respective plant extract. They were then characterized by UV-Vis spectroscopy, FTIR, GC-MS, EDAX, and SEM analysis. Results of UV-Vis spectroscopy showed the maximum absorbance peak at 350 nm. SEM analysis showed that the sizes of... [more]

Biodiesel is a promising renewable energy option that significantly reduces the emission of greenhouse gases and other toxic byproducts. However, a major challenge in the industrial scale production of biodiesel is the desired product purity. To this end, reactive distillation (RD) processes, which involve simultaneous removal of the byproduct during the transesterification reaction, can drive the equilibrium towards high product yield. In the present study, we first optimized the heat exchange network (HEN) for a high purity RD process leading to a 34% reduction in the overall energy consumption. Further, a robust control scheme is proposed to mitigate any feed disturbance in the process that may compromise the product purity. Three rigorous case studies are performed to investigate the effect of composition control in the cascade with the temperature control of the product composition. The cascade control scheme effectively countered the disturbances and maintained the fatty acid mon... [more]

In this paper, the free convective heat transfer of nanofluids in a square cavity is simulated using a numerical method. The angle of the cavity could be changed in the horizontal axis from 0 to 90 degrees. The cavity is exposed under a constant magnetic field. Two opposite walls of the cavity are cold and warm, and the rest of the walls are insulated. On the hot wall, there are two fins with the same wall temperature. The equations were discretized by the finite volume method (FVM) and then solved using the SIMPLE algorithm. Three different fin configurations (straight, inclined and curved) were studied in terms of heat transfer rate and generation of entropy. According to the simulation results, the heat transfer rate was improved by tilting the fins toward the top or bottom of the cavity. At Ra = 105 and Ha = 20, the maximum heat transfer rate was achieved at a cavity inclination of 90° and 45°, respectively, for straight and curved fins. In the horizontal cavity, heat transfer rate... [more]