Naphthalene (NAP) is a typical gaseous polycyclic aromatic hydrocarbons (PAHs) pollutant that displays toxicological effects on biosystems. Ordered mesoporous carbon has relatively adequate adsorption capacity; however, the attached hydrophilic functional groups were proven to affect the adsorption performance in the presence of moisture. In this paper, trimethylchlorosilane (TMCS) is used to carry out the hydrophobic modification of ordered mesoporous carbon FDU-15, and the adsorption and desorption properties of FDU-15 were studied. Furthermore, the adsorption isotherms of naphthalene on FDU-15 and modified FDU-15 were fitted by L-F equation, and the kinetic parameters of desorption of naphthalene on modified FDU-15 were analyzed based on the method of temperature programming desorption (TPD). The results showed that the micropore volume and specific surface area of FDU-15 were significantly increased after hydrophobically modified by TMCS, and the polar functional groups of the hydr... [more]

In the oil and gas industry, there has not been a consistent, concerted effort to reduce global greenhouse gas (GHG) emissions across the supply chain. In addressing this challenge, this study evaluates the potential GHG emissions reduction that may be realized through deployment of a geothermal power co-production system in two Colombian oil fields, compared to a base case where energy needs are derived through non-renewable sources such as gas and diesel. These geothermal power co-production systems make use of organic Rankine cycle (ORC) engines to convert the heat from produced oilfield fluids into electrical energy. The energy potential of this resource is evaluated through the exergy concept, and a life cycle analysis is implemented to calculate the carbon footprint using the Intergovernmental Panel on Climate Change (IPCC) 2013 methodology. In the two oil fields of interest, OFA and OFB, the results show a maximum potential energy production of 2260 kWe for OFA and 657 kWe for O... [more]

Throughout the last decades the developments on desalination field have been focused on energy consumption and costs reduction. However, water recovery and brine disposal are becoming a matter of concern to desalination industry. In this work, a Zero Liquid Discharge (ZLD) unit coupled with a Solar Micro Gas Turbine (SMGT) system is presented to address, among others, the challenges of mining industry in remote areas, in particular, fossil fuel dependence, water availability and pollution derived from effluents disposal. As a way to assess the feasibility of the proposal, a techno-economic analysis of the application in two Southern American regions (Chile and Ecuador) of photovoltaic modules, wind turbines and Solar Micro Gas Turbines is performed. Afterwards, the main novel feature of the new system—i.e., the ZLD unit—is described and a sensitivity analysis on its functioning whilst coupled with the SMGT is carried out. The aim is to propose a preliminary design of the ZLD process. T... [more]

The transformation of our linear “take-make-waste” system to a cyclic flow of materials and energy is a priority task for society, but the circular use of waste streams from one industry/sector as a material input for another must be completely safe. The need for new advanced technologies and methods ensuring both microbiological safety and the removal of potential chemical residues in used materials and products is urgent. Non-thermal atmospheric plasma (cold atmospheric plasma—CAP) has recently attracted great research interest as an alternative for operative solutions of problems related to safety and quality control. CAP is a powerful tool for the inactivation of different hazardous microorganisms and viruses, and the effective decontamination of surfaces and liquids has been demonstrated. Additionally, the plasma’s active components are strong oxidizers and their synergetic effect can lead to the degradation of toxic chemical compounds such as phenols and azo-dyes.

The problem of eliminating petroleum pollution and its consequences is currently very relevant for Kazakhstan, which is among the ten largest oil-producing countries. The specifics of natural conditions—the sharply continental arid climate—necessitate the development and application of adequate technologies for the restoration of oil-contaminated territories and the Caspian seashore. The key factors (temperature, moisture, alkalinity, salinity, low mineral and organic matter content) affect the self-purification processes and microbiological status of oil-contaminated soils of Kazakhstan. The assessment of taxonomic diversity and characteristics of oil-degrading microorganisms isolated from samples of soils and reservoirs contaminated with hydrocarbons are given. The review of biopreparations and biotechnologies developed and used in Kazakhstan for cleaning environments from oil pollution is made, and their effectiveness is shown. The analysis of the current state of research in the fi... [more]

Today’s customer no longer wants one-size-fits-all products but expects products and services to be as tailored as possible. Mass customization and personalization are becoming a trend in the digitalization strategy of enterprises and manufacturing in Industry 4.0. The purpose of the paper is to develop and validate a conceptual model for leveraging Industry 4.0 and digitalization to support product customization. We explored the implications and impacts of Industry 4.0 and digitalization on product customization processes and determine the importance of variables. We applied structural equation modeling (SEM) to test our hypotheses regarding the antecedents and consequences of digitalization and Industry 4.0. We estimated the process model using the partial least squares (PLS) method, and goodness of fit measures show acceptable values. The proposed model considers relationships between technology readiness, digitalization, internal and external integration, internal value chain, and... [more]

The filamentous fungus Penicillium canescens, isolated from oil-polluted soil, was evaluated for its ability to dissipate high-molecular-weight polycyclic aromatic hydrocarbons (PAH). The study was conducted in a microcosm containing 180 g of historical PAH-contaminated soil under non-sterile conditions with two incubation temperatures (14 °C and 18 °C) on a 12-h cycle. The experiment was conducted over 8 months, with four experimental conditions created by varying the volumes of the bulking agent and vegetable oil (olive oil) and the time of addition of these compounds. The PAH dissipation performance of the fungal augmentation treatment was compared with that achieved with a biostimulated soil (bulking agent and vegetable oil) and with the untreated soil as control. The greatest PAH dissipation was obtained with P. canescens bioaugmentation (35.71% ± 1.73), with 13 of the 16 US EPA PAH significantly dissipated, at rates above 18%, and particularly high-molecular-weight PAH, composed... [more]

In modern enterprises, all processes that are understood as structured activities intended for production, i [...]

The results obtained from the exergoeconomic and exergy analysis of a model of a generic air conditioning (A/C) system without and with an air membrane exchanger using three commercially available refrigerants: R410A, R407C, and R134a, are reported. The model used specialized software that was validated against recently published data and showed good agreement. A/C systems are energy intensive and consume a significant portion of global electricity. Improving their efficiency by even a small amount will produce considerable savings, reduce running costs, and lower pollution emissions. The efficiency of the same A/c system without and with a membrane was investigated for different ambient temperatures, relative humidities (RHs), and pressure ratios of the compressor. It was shown that the inclusion of a membrane improved the efficiency of the system for all three refrigerants tested, particularly at higher ambient temperature. Both the coefficient of performance and exergetic efficiency... [more]

This paper intends to propose options for climate neutrality concepts by taking non-German international experiences and decisions made into account. Asia-Pacific and Arabic countries do have already same lessons learned by large-scale projects with regard to economic evaluations. Quite a few conceptual studies to generate the climate neutrality of the chemical−pharmaceutical industry in Germany have been published recently. Most of the studies differ even in magnitude but do not refer to or evaluate the other ones. These are all first theoretical feasibility studies. Experimental piloting is not far developed; only few and only stand-alone parts are operated, with no overall concepts. Economic evaluation is missing nearly completely. Economic analysis shows a factor 3 more expensive green technologies. Even if a large optimization potential of about 30% during manufacturing optimization is assumed as significant, cost increases would result. To make green products nevertheless competi... [more]

Development and application of novel technologies in food processing is vital for ensuring the availability of adequate, safe, and convenient food with the desired quality and functional properties. Environmental and economic sustainability of technologies is essential prior to their application in the food processing sector. The objective of this research is to determine the environmental and economic feasibility of ultrasound-assisted extraction (UAE) for recovering functional food ingredients from seaweed. Experimental data is used to conduct a life cycle assessment (LCA) to investigate the environmental performance with a functional unit (FU) of obtaining 1 g of extracted polyphenols, measured as gallic acid equivalents (mg GAE)/g seaweed. A life cycle impact assessment is performed with ReCiPe 2016 at midpoint. The cost of manufacturing (COM) of phenolic-rich extracts (as functional ingredient, bioactive, or nutraceutical) is estimated using time-driven activity-based costing (TDA... [more]

Chlorination disinfection byproducts (CDBPs) can exert adverse human health effects. Many toxicology-based studies confirmed the health hazards of CDBPs, but little research has been done on gut microbiome. We explored the effect of CDBPs on intestinal microbiota in the Simulator of the Human Intestinal Microbial Ecosystem (SHIME). The results showed that CDBPs slightly inhibited the production of short-chain fatty acids, and the abundance of Actinobacteria decreased in the transverse colon and descending colon. The abundance of Proteobacteria increased in the ascending colon and descending colon, while it decreased in the transverse colon. The abundance of Firmicutes decreased in both the ascending colon and descending colon. In particular, the abundance of Lachnospiraceae members, Bilophila, Oscillospira, Parabacteroides, Desulfovibrio, and Roseburia increased in the ascending colon, while the abundance of Sutterella, Bacteroides, Escherichia, Phascolarctobacterium, Clostridium, Citr... [more]

COVID-19 vaccines are used worldwide to promote immunity and, in that sense, vaccination is a step forward toward ending the pandemic. Nevertheless, current vaccines must be ultra-cold or cold-stored. Vaccine coolers’ energy demand and greenhouse gas emissions lead to a significant environmental impact. This article predicts the environmental and energy impacts of some COVID-19 vaccines: Moderna, Janssen, CoronaVac, Pfizer, AstraZeneca−Oxford−Covishield, and Sputnik V, in terms of carbon dioxide emissions using a new approach for the TEWI (Total Equivalent Warming Impact) methodology, with several options of refrigerants from halogenated to natural fluids such as propane, which is natural gas with low GWP (global warming potential). Through the application of new optimization indexes, it is concluded that the evaporation temperature of the refrigerant gas has a great influence on the sizing of the coolers. For example, for the same number of vaccines, the thermal load of Pfizer is more... [more]

Montenegro faces serious challenges in terms of waste tire management. The main goal of our paper is to consider the financial and economic justification of the implementation of the first phase of the project of collection, takeover and transport, sorting, and storage of waste tires from the three municipalities in Montenegro. The financial feasibility analysis pointed out the need to organize the second phase of the project and the production of commercially usable and energy efficient products. That phase would lead to the desired commercial effects and will probably ensure the financial sustainability of the project. The economic feasibility analysis of the project included an assessment of the socio-economic benefits from the emission reduction of the first group of pollutants (PM, SOX, NOX, VOC, CO) as a consequence of the waste tires’ destruction, predominantly by combusting them. Unit values of pollution costs by types of gases, adjusted for Montenegro, were defined in the inte... [more]

In recent years, sewage sludge (SS) and bio-waste management have attracted increasing environmental attention. In this study, hydrothermal carbonization (HTC) technology is investigated in the framework of a co-treatment of sewage sludge digestate (SSD) and an organic fraction of municipal solid waste (OW). The proposed configuration integrates HTC with anaerobic digestion (AD) in an inter-stage configuration (AD1 + HTC + AD2). The effects of different percentages of OW added to SSD in the HTC treatment are evaluated in terms of characteristics and methane yield of the produced HTC liquor (HTCL) and HTC slurry (i.e., the mixture hydrochar-HTCL), as well as dewaterability of the HTC slurry. Results show that, with the increase in the percentage of OW in the OW-SSD mixture fed to the HTC process, production of biogas and biomethane of both HTC slurry and HTCL increases. The highest biogas production is achieved when a mixture consisting of half SSD and half OW is used, reaching 160 ± 10... [more]

Stainless steel has a variety of applications nowadays because of its mechanical strength and corrosion resistance. The large-scale machinery made up of stainless steel has an outstanding performance and endurance for manufacturing industries. However, stainless steel scraps accumulate with a lubricant to form sludge during the operation. To reduce the environmental hazards caused by sludge, this research attempts to construct a hydrometallurgical process to recover iron, nickel, and chromium from the sludge. The experiments could be divided into four parts. First, calcination was adopted to remove the oil and water content. The factors that have impacts on the leaching efficiency, such as the type of acid and the calcination temperature, were investigated in the second part. It was optimal that the sludge was calcined at 300 ℃ for 8 h and leached by 4 mol/L HCl. The results revealed that the leaching percentages of iron, nickel, and chromium were 97.6%, 98.1%, and 95.7%, respectively.... [more]

This paper presents an optimization method for the civil aircraft environmental control system (ECS) mainly involving two airstreams: the ram airstream for cooling and the bleed airstream for supplying the cabin. The minimum total fuel energy consumption rate (FECR), defined as the weighted sum of the shaft power extraction and propulsive power loss, is obtained under the precondition of the constant outputs in the cooling capacity and outlet pressure. A modified genetic algorithm (GA) is proposed to acquire the optimal values of the heat transfer areas, temperature ratio of bleed air, mass flow rate of ram air, and pressure ratios of the turbine, compressor, and fan. The statistical results show that the multipoint crossover and continuity improvement implemented in the modified GA improve convergence and distribution performance. The probability of reaching a satisfactory result using modified GA is 62.4% higher than standard GA. Due to the decrease of inlet parameters of bleed air a... [more]

Mining activities, ore concentrations, and transport processes generate large amounts of pollutants, including hazardous elements, which are released into the environment. This work presents the results of experimental research aimed at evaluating the environmental risks of soil and plant contamination in two magnesite mining and processing areas in the Slovak Republic, and assesses the phytoremediation potential of dominant plant species. Eleven potentially toxic elements in the soil were investigated using X-ray fluorescence spectrometry (Cd, Pb, Cr, Zn, Cu, As, Ni, Mn, Mg, Fe) and atomic absorption spectrometry (Hg). In plants, potentially toxic elements were investigated using inductively coupled plasma mass spectrometry (Cu, As, Cd, Pb) and inductively coupled plasma atomic emission spectrometry (Cr, Zn, Mn, Mg). Selected soil parameters (pH, redox potential, and soil organic matter) were also investigated. Soil contamination was evaluated using environmental indices (geoaccumulat... [more]

Expanding cities means increasing the need for energy in the residential sector. The supply of this energy must be in environmentally friendly ways; one method of meeting demand in the residential sector is the use of combined cooling, heating, and power (CCHP) systems. The current review paper shows that due to the high cost of gas and electricity, CCHP can be used in various sectors, such as hospitals and airports, to reduce energy consumption with lower environmental impacts by using renewable energy systems as the main driver. While CCHP systems are not feasible in tropical regions with high cooling demand, a solar hybrid system is a superior candidate for regions with sufficient radiation. CCHP can also be used in sectors such as wastewater treatment units, desalination systems, and hydrogen production units to improve performance and increase productivity. The carbon and water footprints of CCHP systems are discussed in detail. The main drivers for reducing carbon and water footp... [more]

Crude oil is a viscous dark liquid resource composed by a mix of hydrocarbons which, after refining, is used for the elaboration of distinct products. A major concern is that many petroleum components are highly toxic due to their teratogenic, hemotoxic, and carcinogenic effects, becoming an environmental concern on a global scale, which must be solved through innovative, efficient, and sustainable techniques. One of the most widely used procedures to totally degrade contaminants are biological methods such as bioremediation. Synthetic biology is a scientific field based on biology and engineering principles, with the purpose of redesigning and restructuring microorganisms to optimize or create new biological systems with enhanced features. The use of this discipline offers improvement of bioremediation processes. This article will review some of the techniques that use synthetic biology as a platform to be used in the area of hydrocarbon bioremediation.

Some sweet tasting plant secondary metabolites are non-caloric or low nutritive compounds that have traditional use in food formulations. This mini-review focuses on conventional and advanced cultivation regimes of plants that accumulate sweet tasting or sweet taste modulating secondary metabolites of potential economic importance, in particular mogrosides (Siraitia grosvenorii), phyllodulcin (Hydrangea macrophylla), glycyrrhizin (Glycyrrhiza glabra), steviol glycosides (Stevia grosvenorii), and rubusoside (Rubus suavissimus). Consequential obstacles during the cultivation of Hydrangea macrophylla cultivars outside their natural habitat in a protected cultivation environment are addressed. Culturing at non-habitat locations facilitates short transportation routes of plant material for processing, which can be a key to an economically and environmentally compatible usage. The biosynthetic pathways, as far as known, are shortly mentioned. The proved or hypothetical degradation pathways o... [more]

The expansion of protected agriculture has technological, climatic, and topographic limitations. The agricultural regions of Costa Rica use the greenhouse concept and adapt it to its conditions. The objective of this work was to describe the variation in temperature and humidity in a greenhouse ventilated passively and on land with a more than 45% slope. To evaluate the environment inside the greenhouse, temperature and humidity variations were measured with a weather station installed outside of the greenhouse to measure the external environment. Inside the greenhouse, 17 sensors were placed to measure the temperature (T) and relative humidity (RH). During data recording inside the greenhouse, tomato crops were in the fruit formation stage, and pepper was less than one week old. Six scenarios were tested to determine the air temperature and humidity dynamic under different climatic conditions. An evaluation of the greenhouse environment was carried out employing an analysis of varianc... [more]

The condition of the bearing is closely related to the condition and remaining life of the rotating machine. Targeting the problem of the large number of harmonic signals and noise signals during the operation of rolling bearings, and given that it is difficult to identify the fault in time, an adaptive orthogonal matching pursuit algorithm (OMP) and an improved K-singular value decomposition (K-SVD) for bearing fault feature extraction are proposed. An adaptive OMP algorithm is applied, which uses the Fourier dictionary to improve the solution method of the OMP algorithm so that it can separate the harmonic components in the signal faster and more accurately. At the same time, the stopping criterion of the adaptive sparsity is improved in dictionary learning. There is no need to manually set the sparsity in the algorithm initialization process, which avoids the problem of algorithm performance degradation due to improper sparsity settings, and improves the efficiency of the K-SVD algo... [more]

There have been numerous studies highlighting the efficacy of various bacteriophages (phages) and phage cocktails in the reduction of pathogens in food. Despite approval from legislative bodies permitting phage use in food processing environments, applied via spray or dip, there is still no information on which spray parameters should be used for successful implementation. The study here investigates phage survival diluted to 1% in distilled water (dH2O) and prepared bottled water (PBW), followed by a subsequent spray application through a fixed nozzle (530 μm) and strainer size (74 × 74 μm), with pressures of 3, 5, and 6 Bar. The survival of the phage was determined through sampling the outputs of the spray system and performing double agar overlay plaque assays. PBW decreased the phage concentration (p = 0.18) more than the dH2O (p = 0.73) prior to spray application. It was found that the PBW phage solution was less affected by the various spray parameters (p = 0.045) than the dH2O (... [more]

By increasing the resistance of seeds against abiotic and biotic stress, the possibility of cereal mold contamination and hence the occurrence of secondary mold metabolites mycotoxins decreases. The use of biological methods of seed treatment represents a complementary strategy, which can be implemented as an environmental-friendlier approach to increase the agricultural sustainability. Whereas the use of resistant cultivars helps to reduce mold growth and mycotoxin contamination at the very beginning of the production chain, biological detoxification of cereals provides additional weapons against fungal pathogens in the later stage. Most efficient techniques can be selected and combined on an industrial scale to reduce losses and boost crop yields and agriculture sustainability, increasing at the same time food and feed safety. This paper strives to emphasize the possibility of implementation of biocontrol methods in the production of resistant seeds and the prevention and reduction i... [more]