var. ferrea (Fabaceae) is endemic to ferruginous tropical rocky outcrops in the eastern Amazon, also known as canga. Canga are often associated with mining activities and are the target of protection and rehabilitation projects. M. acutistipula stands out in this biodiversity hotspot with high growth rates, even in rehabilitating minelands (RMs). However, little is known about the diversity of soil microorganisms interacting with M. acutistipula in canga and RMs. This study analyzed the rhizosphere-associated bacterial and fungal microbial communities associated with M. acutistipula growing in an RM and a native shrub canga. The fungal phylum Ascomycota was the dominant taxa identified in the rhizosphere of the canga (RA: 98.1) and RM (RA: 93.1). The bacterial phyla Proteobacteria (RA: 54.3) and Acidobacteria (RA: 56.2) were the dominant taxa identified in the rhizosphere in the canga and RM, respectively. Beneficial genera such as Bradyrhizobium, Rhodoplanes, and Paraconiothyrium were... [more]

“The Hebei Xiongan New Area Planning Outline” states that the carbon sink of the water body should be improved and the quality of Baiyangdian water should be improved by cleaning the sludge, but the treatment of endogenous pollution in the water body will release a large amount of carbon dioxide, which will reduce the carbon sink of Baiyangdian, which makes the improvement of water body quality and increasing carbon sink conflicting. In order to realize the coordinated development of Baiyangdian water quality improvement and carbon sink increase, this paper establishes the calculation model of the amount of sludge to be cleared to improve the unit water quality and the amount of carbon dioxide released by clearing the silt using the release flux and diffusion flux of nitrogen and phosphorus elements in the water body, and the relationship between the content of nitrogen and phosphorus elements, the depth of Baiyangdian sludge excavation and the amount of carbon dioxide released: as the... [more]

Human survival depends on the sustainable development of agriculture. This study constructs a data-driven evaluation and optimization method of agricultural sustainable development capacity, aiming to better cope with challenges such as environmental pollution and excessive consumption of resources and energy, as well as improve agricultural economic level. Further, an evaluation index system was constructed based on comprehensive consideration of energy and resources utilization, environmental pollution, and agricultural economy. After simplifying and integrating the data, a data envelopment analysis model was constructed to quantitatively evaluate the capability for agricultural sustainable development and its changing trend. Moreover, its influencing factors were analyzed from the perspective of input, which provides accurate countermeasures for improving agricultural sustainable development ability, resource utilization efficiency, and process optimization. This study shows the rea... [more]

Emission of nitrogen oxides (NOx) and soot particles during the combustion of biomass fuels and municipal solid waste is a major environmental issue. Hydrogen cyanide (HCN) and acetylene (C2H2) are important precursors of NOx and soot particles, respectively. In the current work, infrared tunable diode laser absorption spectroscopy (IR-TDLAS), as a non-intrusive in situ technique, was applied to quantitatively measure HCN and C2H2 in a combustion environment. The P(11e) line of the first overtone vibrational band v1 of HCN at 6484.78 cm−1 and the P(27e) line of the v1 + v3 combination band of C2H2 at 6484.03 cm−1 were selected. However, the infrared absorption of the ubiquitous water vapor in the combustion environment brings great uncertainty to the measurement. To obtain accurate temperature-dependent water spectra between 6483.8 and 6485.8 cm−1, a homogenous hot gas environment with controllable temperatures varying from 1100 to 1950 K provided by a laminar flame was employed to per... [more]

In recent years, people have been increasingly concerned about air quality and pollution since a number of studies have proved that air pollution, especially PM2.5 (particulate matter), can affect human health drastically. Though the research on air quality prediction has become a mainstream research field, most of the studies focused only on the prediction of urban air quality and pollution. These studies did not predict the actual impact of these pollutants on people. According to the researchers’ best knowledge, the amount of polluted air inhaled by people and the amount of polluted air that remains inside their body are two important factors that affect their health. In order to predict the quantity of PM2.5 inhaled by people and what they have retained in their body, a process and a platform have been proposed in the current research work. In this research, the experimental process is as follows: (1) First, a personalized PM2.5 sensor is designed and developed to sense the quantit... [more]

High-efficiency bioremediation technology for heavy oil pollution has been a popular research topic in recent years. Laccase is very promising for the remediation of heavy oil pollution because it can not only convert bio-refractory hydrocarbons into less toxic or completely harmless compounds, but also accelerate the biodegradation efficiency of heavy oil. However, there are few reports on the use of laccase to enhance the biodegradation of heavy oil. In this study, we investigated the effect of laccase on the bacterial consortia degradation of heavy oil. The degradation efficiencies of bacterial consortia and the laccase-bacterial consortia were 60.6 ± 0.1% and 68.2 ± 0.6%, respectively, and the corresponding heavy oil degradation rate constants were 0.112 day−1 and 0.198 day−1, respectively. The addition of laccase increased the heavy oil biodegradation efficiency (p < 0.05) and biodegradation rate of the bacterial consortia. Moreover, gas chromatography−mass spectrometry analysi... [more]

Anaerobic digestion of biomass has increasing implementation for bioenergy production. The solid by-product of this technology, i.e., the digestate, has relevant potential in agricultural and environmental applications. This study explored the capacity of a digestate from mixed feedstock to remove from water four endocrine-disrupting chemicals, namely the pesticides metribuzin (MET) and boscalid (BOS) and the xenoestrogens bisphenol A (BPA) and 4-tert-octylphenol (OP). The surface micromorphology and functional groups of the digestate were investigated using scanning electron microscopy (SEM) and Fourier-transform infrared (FTIR) spectroscopy, respectively. Results of sorption kinetics showed that all compounds reached the steady state in a few hours according to a pseudo-first-order model in the cases of MET and OP, a pseudo-second-order model for BOS and both models in the case of BPA. Data of adsorption isotherms were fitted to the Henry, Freundlich, Langmuir and Temkin equations. T... [more]

Numerous studies have examined the relationship between technological development and pollution. From a global economic perspective, the narrowing of one country’s technological gap relative to the world technology frontier (due to the technological progress) may affect its environmental pollution. However, few studies have focused on this issue. This study examined the relationship between technology gap and air pollution both theoretically and empirically. The theoretical model shows that narrowing the technology gap may help reduce pollution. Using patent data from USPTO, as well as industrial level pollution and socio-economic data in China, this paper found that the narrowing of technology gap plays a role in reducing air pollution emissions in China, which confirms the theoretical model. This study provides a new perspective on the relationship between technology progress and pollution.

Subjectively, to verify the human perception of the state of satisfaction with the environment it is necessary to use objective methods. One of these methods is the heat flux measuring method. This paper points out the risk factors that affect the heat transfer coefficient H through building structures that are necessary to determine the projected heat input of the building. At the operation stage, the aforementioned structures are affected by environmental factors (noise, artificial lighting, heat sources). This changes the suggested value Hc to the real value Hr, which is documented by the measurements. The rate of change of the H value is given by the correction “K”. According to the measurements the value obtained can be corrected from 0.08 to 0.25. The final values of the heat transfer coefficient were generalized in the equation and the value of the building energy category within the energy certification of buildings was determined. The result is a methodology for the optimal de... [more]

The treatment of poultry slaughterhouse wastewater (PSW) with an Expanded Granular Sludge-Bed Bioreactor (EGSB) is hindered by the washout of activated sludge, and difficulties associated with the operation of the three-phase separator and the determination of the optimum up-flow velocity for sludge-bed fluidization. This results in a poor reactor functionality, and thus a poor performance due to pollutants such as fats, oil and grease (FOG) in the PSW being treated. Hydrolyzing the FOG content with a bio-delipidation, enzyme-based agent in a pre-treatment unit would significantly improve the effectiveness of the primary PSW treating system, i.e., the EGSB. In this study, PSW was pre-treated for 48 h with a biological mixture containing bioflocculants and bio-delipidation constituents. The pre-treated PSW was further treated in an EGSB. The PSW FOG, total chemical oxygen demand (tCOD) and total suspended solids (TSS) content were determined to assess the effectiveness of the pre-treatm... [more]

Polyurethanes are most often called “green” when they contain natural, renewable additives in their network or chemical structure, such as mono- and polysaccharides, oils (mainly vegetable oils), polyphenols (e.g., lignins, tannins), or various compounds derived from agro-waste white biotechnology (Principle 7). This usually results in these polyurethanes obtained from less hazardous substrates (Principle 4). Appropriate modification of polyurethanes makes them susceptible to degradation, and the use of appropriate processes allows for their recycling (Principle 10). However, this fulfilment of other principles also predisposes them to be green. As in the production of other polymer materials, the synthesis of polyurethanes is carried out with the use of catalysts (such as biocatalysts) (Principle 9) with full control of the course of the reaction (Principle 11), which allows maximization of the atomic economy (Principle 2) and an increase in energy efficiency (Principle 6) while minim... [more]

Constructed wetlands (CW) is an environmentally friendly technique for removing pollutants from wastewater and has been applied to municipal wastewater, petroleum refinery wastewater, agriculture drainage, acid mine drainage, etc. The past decade has seen a remarkable number of innovations in the exponentially growing field of microbiology. This manuscript covers a critical review of key aspects of CW, such as various types of CW, the contaminants and their removal mechanisms, degradation pathways, challenges and opportunities, materials, applications, and theory with a focus on recent advances in the last three decades. In addition, an attempt has been taken to project future advances in the field of CW and facilitate these advances by framing key unsolved problems in CW. Guidelines are prepared for the fast-growing CW field through the standardization of key design aspects. This review covers the evaluation of the current state-of-the-art of CW technology and provides definitions and... [more]

Textile effluent containing azo dyes such as C.I. Acid Violet 1 (AV1) can be degraded to toxic aromatic amines in the environment. Thus, there is a legitimate need to treat such effluents before they are discharged to surface waters. Two methods were proposed to remove AV1 from aqueous solutions: adsorption and advanced oxidation processes (AOPs). The sorption capacity of the strongly basic anion exchanger Purolite A520E of the polystyrene matrix determined from the Langmuir isotherm model was found to be 835 mg/g, while that of Lewatit S5428 of the polyacrylamide matrix Freundlich model seems to be more appropriate for describing the experimental data. The pseudo-second-order kinetic model and external diffusion are the rate limiting steps of adsorption. The removal efficiency of AV1 by the anion exchangers was higher than 99% after 40 min of phase contact time. AOPs involved the usage of hydrogen peroxide and peracetic acid (PAA) as oxidizing agents, while Fe2+ and simulated sunlight... [more]

Mining extraction operations generate a large number of tailings that contain different mineral phases such as quartz (principally), complex silicates, metallic elements, etc. Tailings impose a serious concern as it is possible to have acid mine drainage potential, leaching, and percolation events of heavy metals into the environment under certain conditions. The objective of this work was to evaluate the technical feasibility of producing ceramic foams from gold and silver tailings with high sulfide gangue through a previous flotation process to eliminate impurities associated to this gangue, as it can produce SO2 in the foaming process, and to analyze the effect of the sintering time and the temperature on the characteristics of foams obtained with this type of waste. The results showed that the inverse flotation reduced the presence of impurities associated to sulfides. In addition, it was possible to observe that in the absence of a foaming agent, it was possible to obtain ceramic... [more]

Several optimization models, which consider economic and environmental perspectives, have been developed recently to support the sustainable biomass-to-biofuel supply chain (BBSC) design. All of the economic-environmental optimization models rely on solving long-term planning problems with a conventional hierarchical approach, where tactical decisions are made based on the optimal strategic decisions from the strategic-level model, despite it arousing non-optimal solutions. Moreover, almost all of them have used non-monetary-based environmental indicators, which result in difficulties with clarity when comparing with economic objectives. Therefore, in this work, an effort is made to develop a more reliable planning strategy that offers optimal strategic and tactical decisions simultaneously and maximizes the economic and environmental benefits. Furthermore, the environmental performance of the BBSC has been assessed in terms of monetary value by adopting an ecocost approach after perfo... [more]

This study evaluates the performance of different agricultural by-products to identify the potential effect of independent variables, using as the dependent variable the biogas production. A Box−Behnken experimental design was carried out in a pilot-scale plant of four stirred stainless-steel digesters under mesophilic semi-continuous digestion. The results obtained support the creation of a technical framework to scale up the process and further evaluation of the potential environmental impacts through life cycle assessment (LCA) methodology. A stable behaviour was achieved in 12 of the 13 experiments proposed. The highest value of daily biogas production was 2200.15 mL day−1 with a stabilization time of 14 days, an organic loading rate of 4 g VS feed daily, low C/N ratio and a 1:1 relation of nitrogen providers. The concentrations of CH4 remained stable after the production stabilization and an average biogas composition of 60.6% CH4, 40.1% CO2 and 0.3% O2 was obtained for the condit... [more]

The uncontrolled release of pharmaceutical drugs into the environment raised serious concerns in the last decades as they can potentially exert adverse effects on living organisms even at the low concentrations at which they are typically found. Among them, platinum based cytostatic drugs (Pt CDs) are among the most used drugs in cancer treatments which are administered via intravenous infusion and released partially intact or as transformation products. In this review, the studies on environmental occurrence, transformation, potential ecotoxicity, and possible treatment for the removal of platinum cytostatic compounds are revised. The analysis of the literature highlighted the generally low total platinum concentration values (from a few tens of ng L−1 to a few hundred μg L−1) found in hospital effluents. Additionally, several studies highlighted how hospitals are sources of a minor fraction of the total Pt CDs found in the environment due to the slow excretion rate which is longer th... [more]

Polycyclic aromatic hydrocarbons (PAHs) are widely presented in the environment and pose a serious environmental threat due to their toxicity. Among PAHs, naphthalene is the simplest compound. Nevertheless, due to its high toxicity and presence in the waste of chemical and oil processing industries, naphthalene is one of the most critical pollutants. Similar to other PAHs, naphthalene is released into the environment via the incomplete combustion of organic compounds, pyrolysis, oil spills, oil processing, household waste disposal, and use of fumigants and deodorants. One of the main ways to detoxify such compounds in the natural environment is through their microbial degradation. For the first time, the pathway of naphthalene degradation was investigated in pseudomonades. The salicylate was found to be a key intermediate. For some time, this pathway was considered the main, if not the only one, in the bacterial destruction of naphthalene. However, later, data emerged which indicated t... [more]

To solve the problem of fuzziness and randomness in regional logistics decarbonization evaluation and accurately assess regional logistics decarbonization development, an evaluation model of regional logistics decarbonization development is established. First, the evaluation index of regional logistics decarbonization development is constructed from three dimensions: low-carbon logistics environment support, low-carbon logistics strength and low-carbon logistics potential. Second, the evaluation indexes are used as cloud model variables, and the cloud numerical characteristic values and cloud affiliation degrees are determined according to the cloud model theory. The entropy weight method is used to determine the index weights, and the comprehensive determination degree of the research object affiliated to the logistics decarbonization level is calculated comprehensively. Finally, Beijing-Tianjin-Hebei region is used as an example for empirical evidence, analyzing the development logis... [more]

High-spatiotemporal-resolution land surface temperature (LST) is a crucial parameter in various environmental monitoring. However, due to the limitation of sensor trade-off between the spatial and temporal resolutions, such data are still unavailable. Therefore, the generation and verification of such data are of great value. The spatiotemporal fusion algorithm, which can be used to improve the spatiotemporal resolution, is widely used in Landsat and MODIS data to generate Landsat-like images, but there is less exploration of combining long-time series MODIS LST and Landsat 8 LST product to generate Landsat 8-like LST. The purpose of this study is to evaluate the accuracy of the long-time series Landsat 8 LST product and the Landsat 8-like LST generated by spatiotemporal fusion. In this study, based on the Landsat 8 LST product and MODIS LST product, Landsat 8-like LST is generated using Spatial and Temporal Adaptive Reflectance Fusion Model (STARFM), Enhanced STARFM (ESTARFM), and the... [more]

In this work, an energetic and environmental evaluation of the electricity generation process through refuse-derived fuel (RDF) gasification coupled to a gas microturbine (GM) was performed. Two scenarios are considered with different gasification agents in RDF gasification modeling: air and air enriched with oxygen. A thermodynamic chemical equilibrium approach was used to analyze the gasification parameters. The results of RDF gasification indicate a maximum value of syngas low heating value (LHV) equal to 8.0 MJ/Nm3, obtained for an equivalence ratio of 0.3. The use of these syngas in the gas microturbine produces 79.6 kW of electrical power. For the environmental evaluation of gasification and electricity generation systems, the Life Cycle Assessment methodology was employed. The calculated environmental impacts indicate that the emission of contaminants from fossil fuel combustion (in the stage of transport by heavy load vehicles) and that the electricity consumption for equipment... [more]

High azoxystrobin (AZO), difenoconazole (DFZ), and imidacloprid (IMD) pesticide removal rates in sixteen bench-scale experiments concerning tomato washing water treatment were obtained through a UVC/H2O2 advanced oxidative process. Experimental conditions ([H2O2]0) and irradiance (EUVC) were optimized for higher degradation rates (pseudo-first-order reaction). To consider both economic aspects and environmental impacts when defining the treatment technology, as well as technological requirements, this study applied a multi-criteria decision-making method (MCDM) to assess and differentiate similar UVC/H2O2 process configurations. This allowed for the identification of the cheapest experimental arrangement with the lowest associated environmental impacts, coupled to the highest degradation rate (kIMD). After consulting experts to determine the importance of the applied criteria and measuring alternative performances, experiment E7 ([H2O2]0 = 43.5 mg L−1; EUVC = 15.0 W m−2; kIMD = 0.236 s... [more]

Industrial companies focus on efficiency and cost reduction, which is very closely related to production process safety and secured environments enabling production with reduced risks and minimized cost on machines maintenance. Legacy systems are being replaced with new systems built into distributed production environments and equipped with machine learning algorithms that help to make this change more effective and efficient. A distributed control system consists of several subsystems distributed across areas and sites requiring application interfaces built across a control network. Data acquisition and data processing are challenging processes. This contribution aims to present an approach for the data collection based on features standardized in industry and for data classification processed with an applied machine learning algorithm for distinguishing exceptions in a dataset. Files with classified exceptions can be used to train prediction models to make forecasts in a large amoun... [more]

The PM2.5 and other small particles produced by cooking oil fumes have contributed up to 25% to the urban atmospheric PM2.5, which has a bad impact on air quality and seriously threatens human health. Aiming at the pollution problem caused by catering oil fume, this article analyzes the threats of air pollution to human health based on the compositions and characteristics of catering oil fume, illustrates the development trend of China′s food and beverage lampblack control policy, and summarizes and points out the current situation and development trend of catering oil fume treatment. In order to provide ideas for the design of more efficient and energy-saving treatment processes in the future, the advantages and disadvantages were reviewed, and the improvement direction of the treatment technology was discussed.

The ongoing Industry 4.0 transformation places significant pressures on how businesses create and capture value. Technological advancements such as next-generation mobile communications are reshaping the business ecosystem of Industry 4.0, resulting in emerging business opportunities for new players, such as local operators, to collaborate and compete with mobile communications companies that are implementing I4.0. These changes raise the need to explore emerging business opportunities concerning the digitalization of future factories. New data and connectivity services are introduced to serve the needs of rapidly increasing machine-type communications that rely on connectivity, primarily through the fifth generation (5G) mobile solutions provided by local operators. Thus, this paper outlines the potential value configurations for data and connectivity solutions by identifying, matching, and bridging the utilizable resources and addressable needs within the factory processes. The resea... [more]