A considerable amount of food waste ends up in centralized treatment plants due to the lack of preventive measures, resulting in significant environmental impacts. Hospitality food waste management is even more resource-intensive because of animal by-products regulation. According to this regulation, companies must store and then consign waste to specific waste managers. The extensive need for transportation of high-moisture-content materials is the leading cause of the impact. Moreover, the management of category III animal by-products is costly for companies. A previous study has shown the economic benefits of decentralized animal by-product treatment by intensive composting in catering companies. Although the produced compost was characterized by exceptional quality parameters, it was phytotoxic. The investigation of hospitality waste management is scarcely discussed among scholars, and waste management on a regional scale is nearly absent. This study examines the regional managemen... [more]

Growing demands for green and sustainable processing that eliminates the utilization of toxic chemicals and increases efficiency has encouraged the application of novel extraction technologies for the food industry. This review discusses the principles and potential application of several green technology for gelatin extraction. Several novel technologies and their processing efficiency are discussed in this review. Furthermore, factors that affect the quality of the gelatin produced from different sources are also highlighted. The potential application of ultrasound-assisted extraction (UAE), subcritical water extraction, high-pressure processing, and microwave-assisted extraction (MAE) to improve gelatin extraction are addressed. These technologies have the potential to become an efficient extraction method compared to the conventional extraction technologies. Several combinations of green and conventional technologies have been reported to yield promising results. These combinations... [more]

Seasonal thermal stratification has a significant impact on water quality. In this paper, the variation of vertical distribution of ammonia nitrogen in a source water reservoir was studied, on the base of field monitoring data. The dominant factor of the variation in ammonia nitrogen is the anaerobic environment caused by the seasonal thermal stratification, which leads to the degradation of nitrogen-containing organic compounds in the sediments. To determine the rates of ammonia accumulation, an in situ experimental chamber was used. The results showed that, before the formation of thermal stratification in the reservoir, sediments in the bottom of the water have a high tendency to release ammonia; the rates of ammonia accumulation in the overlying water are 40.31−111.41 mg·m−2·d−1. However, thermal stratification causes changes in the physical and chemical properties of the sediment and reduction in the degradability of the nitrogen-containing compound in the sediment. The rates of a... [more]

Vehicle emissions are a significant source of air pollution in cities. Particulate matter (PM) is a pollutant with adverse health effects. Regulations worldwide determine the PM exhaust emissions of vehicles by gravimetric quantification of the mass deposited on a filter over a test cycle. The introduction of particulate filters as vehicle exhaust gas aftertreatment devices led to low PM emissions. A particle number methodology (counting solid particles > 23 nm), complementary to the PM mass measurement, was developed by the PMP (Particle Measurement Programme) group of the GRPE (Working Party on Pollution and Energy) of the UNECE (United Nations Economic Commission for Europe) during the first decade of the 21st century. The methodology was then introduced in the EU (European Union) regulations for light-duty (2011), heavy-duty (2013), and non-road mobile machinery (2019). In parallel, during the last 15 years, UN (United Nations) regulations and GTRs (Global Technical Regulations) in... [more]

We assessed constructed wetland (CW) performance in the removal of six emerging pollutants (EPs) from university campus wastewater. The EPs considered were: diethyl phthalate (DEP), di-isobutyl phthalate (DIBP), di-n-octyl phthalate (DNOP), bis(2-ehtylxexyl) phthalate (DEHP), tris(1-chloro-2-propyl) phosphate (TCPP) and caffeine (CAF). Six pilot-scale CWs, i.e., three horizontal subsurface flow (HSF) and three vertical flow (VF), with different design configurations were used: two types of plants and one unplanted for both the HSF and the VF, two hydraulic retention times (HRT) for the HSF, and two wastewater feeding strategies for the VF units. The results showed that the median removals in the three HSF-CWs ranged between 84.3 and 99.9%, 79.0 and 95.7%, 91.4 and 99.7%, 72.2 and 81.0%, 99.1 and 99.6%, and 99.3 and 99.6% for DEP, DIBP, DNOP, DEHP, TCPP, and CAF, respectively. In the three VF-CWs, the median removal efficiencies range was 98.6−99.4%, 63.6−98.0%, 96.6−97.8%, 73.6−94.5%,... [more]

Zeolites are microporous tectosilicates characterized by a three-dimensional network of tetrahedral (Si, Al)O4 units with the general formula: Mx+Ly2+[Al(x+2y)Si1−(x+2y)O2n]·mH2O where M+ and L2+ are monovalent and divalent cations [...]

Fluoride is widely found in soil−water systems due to anthropogenic and geogenic activities that affect millions worldwide. Fluoride ingestion results in chronic and acute toxicity, including skeletal and dental fluorosis, neurological damage, and bone softening in humans. Therefore, this review paper summarizes biological processes for fluoride remediation, i.e., bioaccumulation in plants and microbially assisted systems. Bioremediation approaches for fluoride removal have recently gained prominence in removing fluoride ions. Plants are vulnerable to fluoride accumulation in soil, and their growth and development can be negatively affected, even with low fluoride content in the soil. The microbial bioremediation processes involve bioaccumulation, biotransformation, and biosorption. Bacterial, fungal, and algal biomass are ecologically efficient bioremediators. Most bioremediation techniques are laboratory-scale based on contaminated solutions; however, treatment of fluoride-contaminat... [more]

Reducing the impact of human activity on the environment and, in general, on Earth, represents the most challenging target of the next years [...]

In this work, red mud (RM) and spinel iron oxide nanoparticles (SPIONs) were added to pure silica/alumina sources (SAs) and fly ash (FA) with the aim of synthesizing and investigating the magnetic behavior of different zeolites. SAs were used to synthesize zeolite with LTA topology (zeolite A) with the addition of both red mud and spinel iron oxide nanoparticles. FA and RM were mixed to synthesize sodalite whereas only FA with the addition of SPIONs was used to form zeolite with FAU-topology (zeolite X). All the synthetic products showed magnetic properties. However, zeolites with spinel iron oxide nanoparticles (zeolites A and X) showed ferromagnetic-like behavior. Sodalite was characterized by a reduction in saturation magnetization, whereas zeolite A with red mud displayed antiferromagnetic behavior. For the first time, all the synthetic products were tested for polluted water remediation by a persistent emerging contaminant, ofloxacin (OFL) antibiotic. The four zeolite types showed... [more]

A vision-based adaptive switching controller that uses optical flow information to avoid obstacles for micro unmanned aerial vehicles (MUAV) is proposed in this paper. To use the optical flow to indicate the distance between the MUAV and the environment, we propose an algorithm with multi-thread processing such that the optical flow information is obtained reliably and continuously in the entire camera field of view. The flying behavior of considered MUAV is regarded as a switching system when considering different flying modes during the mission of obstacle avoidance. By the required flight direction for obstacle avoidance specified by the detected optical flow, an adaptive control scheme is designed to track the required trajectory in switching modes. The simulation result shows the tracking performances of the adaptive control with the switching system. The experiment of the whole system is completed to verify the obstacle avoidance capability of our system.

With the advancement of biotechnology, consumers are demanding more scientifically advanced products as well as being more concerned with the environmental impact of products. A life cycle carbon footprint assessment is an important tool in reaching net-zero carbon production goals. This paper presents the greenhouse gas emissions of functional foods by highlighting TCI Co., Ltd. as a case study. TCI conducted life cycle assessments (LCAs) on two mainstream products that utilize common manufacturing processes to examine their carbon footprint and gain a better understanding of their environmental impact. The main finding shows that while the manufacturing stage accounts for around 20−30% of emissions, the raw material stage accounts for 70−80% for both products. This suggests that TCI needs to work closely with its suppliers to ensure a low emissions supply chain and to achieve its net-zero target. Not only do these LCAs allow TCI to increase the products’ transparency, but they can al... [more]

The presence of major heavy metals including Pb2+, Cu2+, Co2+, Ni2+, Hg2+, Cr6+, Cd2+, and Zn2+ in water is of great concern because they cannot degrade or be destroyed. They are toxic even at very low concentrations. Therefore, it is necessary to remove such toxicants from water. In the current study, polydopamine carbon nanotubes (PD-CNTs) and polysulfone (PS) composite membranes were prepared. The structural and morphological features of the prepared PDCN composite membranes were studied using FTIR, XRD, SEM, and EDS. The potential application of PDCNs for heavy metal removal was studied for the removal of Pb2+, Cr6+, and Cd2+ from wastewater. The maximum removal efficiency of 96.1% was obtained for Cr6+ at 2.6 pH using a composite membrane containing 1.0% PD-CNTs. The removal efficiencies decreased by 64.1 and 73.4, respectively, by enhancing the pressure from 0.50 up to 0.85 MPa. Under the same circumstances, the percentages of Pb+2 removal at 0.49 bar by the PDCNS membranes conta... [more]

Malocclusion and teething problems are common health problems globally, affecting people of all ages, especially children and adolescents. In addition to the pathophysiological complications associated with orthodontic problems, they also affect the well-being of the individual. Orthodontic appliances are frequently used, even from an early age, and their activity in different biological environments is very varied and incompletely described. Due to these considerations, the purpose of the study was to evaluate the toxicological profile of the biological environment (saliva at three pH values: 3, 7, and 10) of two elastodontic orthodontic appliances: Myobrace (MB) and LM TrainerTM 2 (LMD). In vitro techniques applied were conducted on human keratinocytes to evaluate cell viability (Alamar blue assay) and gene expression real-time reverse transcription−polymerase chain reaction (RT-PCR technique). In addition, it was assessed the irritating effect on the vascular plexus using as a biolo... [more]

Fluoride excess in water represents an environmental issue and a risk for human health since it can cause several diseases, such as fluorosis, osteoporosis, and damage of the nervous system. Layered double hydroxides (LDHs) can be exploited to remove this contaminant from water by taking advantage of their high ion-exchange capability. LDHs are generally mixed with polluted water in the form of powders, which then cause the problem of uneasy separation of the contaminated LDH sludge from the purified liquid. In this work, Zn−Al LDH films were directly grown in situ on aluminum foams that acted both as the reactant and substrate. This method enabled the removal of fluoride ions by simple immersion, with ensuing withdrawal of the foam from the de-contaminated water. Different LDH synthesis methods and aluminum foam types were investigated to improve the adsorption process. The contact time, initial fluoride concentration, adsorbent dosage, and pH were studied as the parameters that affec... [more]

This study investigated the effects of different proportions (0%, 5%, 10%, 15%) of bulking agent (vinasse, mushroom bran, and tobacco powder) on maturity and gaseous emissions in chicken manure composting. The results showed that all of the treatments reached the standard of harmless disposal. With the exception of the control treatment, the CH4, N2O, and NH3 emissions in the treatments that had been prepared using the addition of mixed bulking agents were effectively reduced by 2.9−30.6%, 8.30−80.9%, and 37.3−26.6%; their compost maturity also met the Chinese national standard. Specifically, 10% mushroom bran combined with 5% tobacco powder was the optimal combination for simultaneously improving the maturity and reducing greenhouse gas emission in chicken manure composting.

Off-grid houses can be considered an important concept to increase the access to electricity throughout the world. Although there are quite some initiatives in place to improve the access to electricity, the implementation rate of practical solutions is far below the UN Sustainable Development Goal 7: Energy (SDG 7) + for 2030. This situation is most apparent in Sub-Saharan Africa, where the current trends of electricity access calculated by the World Bank indicate that this region will not be able to achieve the SDG 7 target. Another worldwide trend which may help to increase electricity access is that currently, a lot of renewable energy generation is realized locally in houses (especially Solar Photovoltaics (PV)). This paper reviews the recent developments to increase the access to electricity in the world and the implementation of off-grid houses in different scenarios. The focus here is on the different efforts to create off-grid houses considering their challenges on a macro and... [more]

The sustainable development of the western region of China has always been essential to the national development strategy. The Western region has undertaken an industrial transfer from the Eastern and Central regions. Therefore, the CO2 emission intensity in the western region is higher than those of the Eastern and Central regions of China, and consequently its low-carbon development pathway has an important impact for China as a whole. Sichuan Province is not only the province with the highest CO2 emissions, but also the most economically developed province in Western China in 2018. In order to promote low carbon development in the western region, it is important to understand the features of emissions in Sichuan Province and to formulate effective energy strategies accordingly. This paper uses the IPCC regional emission accounting method to calculate the carbon emissions of 15 cities in Sichuan province, and to comply with the city-level emission accounts. The results show that the... [more]

Power supply and demand systems are important support systems for industrial production and residents’ lives. They have multiple influencing factors, and complex mechanisms of interaction exist among these factors. In view of the present sustainability problems faced by China’s power supply and demand system, this research adopts a system dynamics (SD) model to simulate the evolution of China’s power supply and demand system, and analyzes the interaction mechanism of various elements of the system. Based on this, an innovative index system for the evaluation of the sustainability of power supply and demand systems is proposed based on the four elements of total amount, structure, technology and environment. Furthermore, by integrating Principal Component Analysis (PCA) and State Space (SS) method, a PCA-SS evaluation model is constructed to explore the development bottleneck of China’s power supply and demand system. The results show that there is still a large gap between the actual s... [more]

An apparatus for the analysis of pressure cores containing gas hydrates at in situ pressures was designed, and a series of experiments to determine the compressional wave response of hydrate-bearing sands were performed systematically in the laboratory. Considering the difficulties encountered in performing valid laboratory tests and in recovering intact hydrate bearing sediment samples, the laboratory approach enabled closer study than the marine environment due to sample recovery problems. The apparatus was designed to achieve in situ hydrate formation in bearing sediments and synchronous ultrasonic detection. The P-wave velocity measurements enabled quick and successive ultrasonic analysis of pressure cores. The factors influencing P-wave velocity (Vp), including hydrate saturation and formation methodology, were investigated. By controlling the initial water saturation and gas pressure, we conducted separate experiments for different hydrate saturation values ranging from 2% to 60%... [more]

In the last few decades, an average method which is regulated by ISO 9869-1 has been used to evaluate the in situ thermal transmittance (U-value) and thermal resistance (R-value) of building envelopes obtained from onsite measurements and to verify the validity of newly proposed methods. Nevertheless, only a few studies have investigated the test duration required to obtain reliable results using this method and the convergence characteristics of the results. This study aims to evaluate the convergence characteristics of the in situ values analyzed using the average method. The criteria for determining convergence (i.e., end of the test) using the average method are very strict, mainly because of the third condition, which compares the deviation of two values derived from the first and last periods of the same duration. To shorten the test duration, environmental variables should be kept constant throughout the test or an appropriate period should be selected. The convergence of the in... [more]

Building utility tunnels has been widely adopted as an important solution for the sustainable development of cities, but their unique fire problems have not attracted enough attention to date. With the purpose of preliminarily understanding the fire phenomena in a utility tunnel, this study performed a comprehensive analysis, including the burning behaviour of accommodated cables, hot gas temperature field and enhanced fuel burning rates based on bench-scale, full-scale and model-scale fire tests. The critical exposed radiative heat flux for the 10-kV power cable to achieve complete burning was identified. The whole burning process was divided into five phases. The cable’s noteworthy hazards and dangerous fire behaviours were also examined. The two-dimensional (2D) gas temperature fields and longitudinal maximum temperature distributions were investigated carefully, after which a versatile model was derived. The model predicted the maximum temperature attenuation of both upstream and d... [more]

Large-scale solar heating for the building sector requires an adequate Thermal Energy Storage (TES) strategy. TES plays the role of load shifting between the energy demand and the solar irradiance and thus makes the annual production optimal. In this study, we report a simplified algorithm uniquely based on energy flux, to evaluate the role of active TES on the annual performance of a large-scale solar heating for residential thermal energy supply. The program considers different types of TES, i.e., direct and indirect, as well as their specifications in terms of capacity, storage density, charging/discharging limits, etc. Our result confirms the auto-regulation ability of indirect (latent using Phase Change Material (PCM), or Borehole thermal storage (BTES) in soil) TES which makes the annual performance comparable to that of direct (sensible with hot water) TES. The charging and discharging restrictions of the latent TES, until now considered as a weak point, could retard the achieve... [more]

Croatia produced 21,366 tonnes of dry matter (DM) sewage sludge (SS) in 2016, a quantity expected to surpass 100,000 tonnes DM by 2024. Annual production rates for future wastewater treatment plants (WWTP) in Croatia are estimated at 5.8−7.3 Nm3/people equivalent (PE) for biogas and 20−25 kgDM/PE of sewage sludge. Biogas can be converted into 12−16 kWhel/PE of electricity and 19−24 kWhth/PE of heat, which is sufficient for 30−40% of electrical and 80−100% of thermal autonomy. The WWTP autonomy can be increased using energy recovery from sewage sludge incineration by 60% for electricity and 100% of thermal energy (10−13 kWhel/PE and 30−38 kWhth/PE). However, energy for sewage sludge drying exceeds energy recovery, unless solar drying is performed. The annual solar drying potential is estimated between 450−750 kgDM/m2 of solar drying surface. The lower heating value of dried sewage sludge is 2−3 kWh/kgDM and this energy can be used for assisting sludge drying or for energy generation and... [more]

(L.) Moench, called sweet sorghum, is a drought-resistant and heat-tolerant plant used for ethanol bioenergy production, and is able to reduce the competition between growing crops for energy vs. growing crops for food. Quantitatively mapping the marginal lands of sweet sorghum is essential for the development of sorghum-based fuel ethanol production. However, knowledge of the contemporary marginal lands of sweet sorghum remains incomplete, and usually relies on sample data or is evaluated at a national or regional scale based on established rules. In this study, a novel method was demonstrated for mapping the global marginal lands of sweet sorghum based on a machine learning model. The total amount of global marginal lands suitable for sweet sorghum is 4802.21 million hectares. The model was applied to training and validation samples, and achieved high predictive performance, with the area under the receiver operating characteristic (ROC) curve (AUC) values of 0.984 and 0.978, respect... [more]

Currently, one of the biggest concerns of human beings is greenhouse gas emissions, especially carbon dioxide emissions in developed and under-developed countries. In this study, connectionist models including LSSVM (Least Square Support Vector Machine) and evolutionary methods are employed for predicting the amount of CO 2 emission in six Latin American countries, i.e., Brazil, Mexico, Argentina, Peru, Chile, Venezuela and Uruguay. The studied region is modelled based on the available input data in terms of million tons including oil (million tons), gas (million tons oil equivalent), coal (million tons oil equivalent), R e w (million tons oil equivalent) and Gross Domestic Product (GDP) in terms of billion U.S. dollars. Moreover, the available patents in the field of climate change mitigation in six Latin American countries, namely Brazil, Mexico, Argentina, Peru, Chile, Venezuela and Uruguay, have been reviewed and analysed. The results show that except Venezuela, a... [more]