The authors propose a new method of predictive replacements of belt sections in a conveyor belt loop with their refurbishment based on their condition recognized by specially designed diagnostic devices: DiagBelt and BeltSonic. Selection of the moment for belt replacement is made on the basis of forecasted state of its wear, when steel cable failure density exceeds the selected threshold or the percentage of belt covers abrasion exceeds the permissible level. The use of double belt refurbishment extends the total belt operation time, but without diagnostics, the reconditioning success rate is relatively low. Visual inspection allows only an uncertain assessment of cable condition. New devices give precise assessment of their condition and allow the selection of a non-linear rate of belt condition based on consecutive scans. The assessed condition of the cables is the key factor in successful belt refurbishment and obtained cost savings. Additionally, diagnostics can help extend belt li... [more]

Traditionally, the Economic Dispatch Model (EDM) integrating Combined Heat and Power (CHP) units aims to reduce fuel costs by managing power-only, CHP, and heat-only units. Today, reducing pollutant emissions to the environment is of paramount concern. This research presents a novel honey badger optimization algorithm (HBOA) for EDM-integrated CHP units. HBOA is a novel meta-heuristic search strategy inspired by the honey badger’s sophisticated hunting behavior. In HBOA, the dynamic searching activity of the honey badger, which includes digging and honing, is separated into exploration and exploitation phases. In addition, several modern meta-heuristic optimization algorithms are employed, which are the African Vultures Algorithm (AVO), Dwarf Mongoose Optimization Algorithm (DMOA), Coot Optimization Algorithm (COA), and Beluga Whale Optimization Algorithm (BWOA). These algorithms are applied in a comparative manner considering the seven-unit test system. Various loading levels are cons... [more]

In this research, the advantages of the e-scooter tool used in the mail or package delivery process were discussed by considering the Turkish Post Office (PTT) data in the districts of Istanbul (Kadıköy, Üsküdar, Kartal, and Maltepe) in Turkey. The optimization Poisson regression model was utilized to deliver the maximum number of packages or mails with minimum cost and the shortest time in terms of energy consumption, cost, and environmental contribution. Statistical and optimization results of dependent and independent variables were calculated using numerical and categorical features of 100 e-scooter drivers. The Poisson regression analysis determined that the e-scooter driver’s gender (p|0.05 < 0.199) and age (p|0.05 < 0.679) factors were not effective on the dependent variable. We analysed that the experience in the profession (tenure), the size of the area responsible, and environmental factors is effective in the e-scooter distribution activity. The number of packages deli... [more]

Due to the growing issues related to water scarcity and pollution, water extraction from gaseous mixtures, such as atmospheric air, or fumes from combustion, is acquiring increasing importance. Nevertheless, one of the main concerns is the energy consumption that affects the use of any kind of Air(/Gas) to Water Generator (AWG). Referring specifically to water extraction from humid environmental air, AWG behaviour depends upon the air thermo-dynamic conditions and thus upon weather data. To evaluate the water extraction energy efficiency, two interesting tools can be applied: the WET (Water Energy Transformation) indicator, concerning the specific AWG machine behaviour, and the MHI (Moisture Harvesting Index), focused on climate suitability evaluation. Those tools require the knowledge of weather data to be applied. When hourly data for the entire year are available, the application of these tools leads to reliable results. However, in many cases, only average climatic data are availab... [more]

As a developing country, South Africa relies on electricity as the most critical amenity needed for development. KwaZulu-Natal (KZN) is one of the nine provinces in South Africa that faces an energy supply challenge. KZN is also the warmest province among them all due to its location. As one of the warmest provinces, solar power could be utilised to assist in dealing with the energy crisis. This paper focuses on the cost uncertainties attributed to the implementation of solar power which will assist in meeting the demand of energy in the region. The unsustainability of energy has led to a near collapse of the region’s economy. This study also contributes to improving the scientific implementation of solar power in the region to deal with the unsustainability criteria observed. The employment of Cost Benefit Analysis (CBA) revealed solar power as one of the most reliable renewable energies for planned implementation bases. With the development of the Economical, Methodological and Envir... [more]

In recent years, growing energy demands and environmental pollution caused by the extensive use of fossil fuels have inspired considerable research interest in adsorptive heat transformation (AHT). This technology offers effective utilization of low-grade solar or waste thermal energy for cooling and heating with low environmental impact. Increasing the AHT power is a keystone for further development and dissemination of this emerging technology. The AHT power is mainly determined by ad/desorption dynamics, which is significantly hindered by slow heat transfer between the adsorbent and heat exchanger. Shaping the adsorbent bed as a coating on the heat exchanger surface is considered an effective route to enhance heat transfer and increase the AHT power. In this review, the technology of adsorbent coating for AHT is comprehensively surveyed, including coating synthesis, adsorption dynamics, and use in real AHT devices. The advantages of the coated bed configuration are considered, and i... [more]

Maintaining mechanical ventilation has been identified as a potential strategy for reducing the risk of virus infections. However, in hot and humid climatic conditions, delivering fresh air to a building comes at an energy cost and could impact occupant comfort due to the persistent need for simultaneous cooling and dehumidification. In this paper, the performance of a novel hybrid air conditioning system that handles fresh air is studied. In this system, dehumidification is accomplished by a solid desiccant dehumidifier coupled with a cooling coil integrated with the cooling tower of an existing chiller system. Using the data available from an operational desiccant cooling system, a system-level model has been developed and validated to study the potential application of the system in hot and humid climates. The study found that such a system is effective in delivering sensible cooling in all types of climates; thanks to the two-stage cooling in cooling coil and chilled water coils, r... [more]

Are small-scale wind turbines green? In this study, we perform a ‘cradle to grave’ life cycle assessment of a novel domestic-scale 10 kW vertical axis wind turbine tree which uses combined Savonius and H-Darrieus blades. Situated at a test site in Surat Thani, Thailand, SimaPro software was used to evaluate the environmental impact profile of the tree. Comparisons to the Thai grid mix were made, using both with and without end-of-life treatments. Impact profiles were calculated using wind data collected over two years at Surat Thani, and from wind data from a higher capacity factor (CF) site at Chiang Mai, Thailand. Energy and greenhouse gas payback times were estimated for both locations. The relative magnitudes of impacts were compared with environmental prices protocol, and we investigated reductions in impacts using three mitigative scenarios: changes to design, transportation and materials. The results showed that Chiang Mai had a CF = 7.58% and Surat Thani had a CF = 1.68%. A tot... [more]

Modern healthcare is transforming from hospital-centric to individual-centric systems. Emerging implantable and wearable medical (IWM) devices are integral parts of enabling affordable and accessible healthcare. Early disease diagnosis and preventive measures are possible by continuously monitoring clinically significant physiological parameters. However, most IWM devices are battery-operated, requiring replacement, which interrupts the proper functioning of these devices. For the continuous operation of medical devices for an extended period of time, supplying uninterrupted energy is crucial. A sustainable and health-compatible energy supply will ensure the high-performance real-time functioning of IWM devices and prolong their lifetime. Therefore, harvesting energy from the human body and ambient environment is necessary for enduring precision healthcare and maximizing user comfort. Energy harvesters convert energy from various sources into an equivalent electrical form. This paper p... [more]

Biomass can be considered an alternative to coal in the production of heat and electricity. Many types of biomass are waste from agriculture and the food industry. This waste is cheap, readily available, and replenished annually. However, most agricultural and food industry wastes (sugar cane pulp, olive and sunflower oil production wastes, straw, etc.) have ash with a low melting point. This leads to a rapid growth of ash deposits on the heating surfaces of boilers; as a result, the actual efficiency of boilers in which waste from agriculture and the food industry is burned is 45−50%. Known biomass pre-treatment technologies that allow for the fuel characteristics of biowaste. For example, leaching of biowaste in water at a temperature of 80−240 °C makes it possible to drastically reduce the content of alkali metal compounds in the ash, the presence of which reduces the melting point of the ash. However, this biomass pre-treatment technology is complex and requires additional costs fo... [more]

Due to industrialization and an exponential increase in population, the demand for vehicles has increased in Kuwait. Utilizing fossil fuels to power vehicles that are in high demand has posed various environmental and medical implications. Considering the emission-free feature of electric vehicles (EVs), moving towards “EV readiness” is the need of the hour. This can be further enhanced by adopting alternative sustainable technologies such as photo voltaic (PV) charging of EVs, to potentially eliminate or significantly reduce the reliance on fossil fuel while simultaneously decreasing harmful emissions. As Kuwait does not manufacture cars, it imports all vehicles and their parts, including internal combustion engines (ICEs) and EVs. To find out the challenges to uplifting Kuwait’s “EV readiness” this study delved into the performance of a typical EV car in Kuwait’s weather conditions. This includes the investigation of parameters that influence the energy requirements in an electric ve... [more]

Accelerating the promotion of the green transition can help to achieve high-quality development in manufacturing industries. In terms of policies that encourage the transition to green production, carbon trading is a direct and effective means of achieving this goal, and the carbon price is an important regulator in trading. Normally, firms respond to carbon prices by making three behavioral choices: production restrictions, pollution reduction, and the technological transition to green production. This study examines the effect of carbon price volatility on the decision to conduct green production, i.e., transforming to sustainable technologies and processes. In addition, this paper also investigates whether organizational resource slack and organizational technical standards moderate the relationship between the carbon price volatility and firms’ green transitions. The results suggest that a steadily increasing carbon price will motivate firms to make a green transition, but if the c... [more]

Future carbon dioxide capture and storage (CCS) will be impacted by the new scenario in which the energy supply rapidly shifts from oil-based to natural gas-based means, but this shift also presents an opportunity to utilize natural gas hydrates (NGHs). This review discusses the present state of CCS research and development, the advantages of the various approaches, and the barriers to commercialization that exist today. It also provides an evaluation of certain practical small- and large-scale CCS applications. The high initial investment, as well as ongoing maintenance costs, plague today’s commercially accessible CO2 capture technologies, including absorption, adsorption, membranes, and cryogenic separation. Gas hydrate-based capture has the potential to become the dominant method for CO2 separation because of the high recovery rates and purity it provides. Hydrate-based technologies, including CO2 capture, CO2 separation, and transportation, can also be used to reduce greenhouse ga... [more]

In recent years, global automotive industries are going through a significant revolution from traditional internal combustion engine vehicles (ICEVs) to electric vehicles (EVs) for CO2 emission reduction. Very similarly, the aviation industry is developing towards more electric aircraft (MEA) in response to the reduction in global CO2 emission. To promote this technology revolution and performance advancement, plenty of electronic devices with high heat flux are implemented on board automobiles and aircraft. To cope with the thermal challenges of electronics, in addition to developing wide bandgap (WBG) semiconductors with satisfactory electric and thermal performance, providing proper thermal management solutions may be a much more cost-effective way at present. This paper provides an overview of the thermal management technologies for electronics used in automobiles and aircraft. Meanwhile, the active methods include forced air cooling, indirect contact cold plate cooling, direct con... [more]

The purpose of this article was to identify the characteristics of HRM (Human Resources Management) portals that can contribute to building a smart, sustainable society in two countries: Poland and Türkiye. The analyzed countries were selected due to their similar economic situation, as well as differences in terms of culture and customs and varying degrees of ICT (Information and Communications Technology) implementation in the economy. Conducting the survey at this particular moment was intended to objectivize users’ opinions on the HRM portals and their attributes that may contribute to mitigating the effects of the crisis and facilitating economic development toward the creation of a sustainable society. The survey was conducted in April 2022. It was carried out in both countries and covered a group of more than 850 respondents. The CAWI (Computer Assisted Web Interview) method was used in the survey. The differences between results were identified, and the degree of verification o... [more]

The crosslinked polyethylene (XLPE) cable safety is affected by environmental factors and artificial defects during operation. This work proposes an improved locating method based on broadband impedance spectrum (BIS) to locate local defects in XLPE cables. The calculation process of the algorithm has been analyzed. The selection of the incident Gaussian signal and the peak recognition method have been discussed, where the pulse width of the Gaussian signal was found to be determined primarily by the upper limit frequency of the traveling wave transmitting in the cable. The centroid and function fitting methods were established to reduce the peak recognition error caused by the test sampling rate. This work verified the accuracy of the algorithm through experiments. A vector network analyzer (VNA) was used to test the BIS of the cable. A 20 m-long cable containing abrasion and an inserted nail with different depths was measured in the BIS test. It was found that the abrasion and the na... [more]

One quarter of global energy consumption goes towards meeting transport needs. In Europe, the share of energy for transport is much higher and accounts for about a third. Therefore, it is very important to monitor the sustainable development and progress of the sector. This paper seeks to develop a framework for the sustainability assessment of road transport in EU countries and to evaluate the countries’ achievements in the last decade. The research adheres to the provision that the developed framework should be easily applied in future studies. Therefore, significant attention is paid to the selection of indicators and their availability, as well as the selection of the research instrument itself. The multi-criteria decision-making (MCDM) technique TOPSIS has been applied for calculations and countries’ ranking, in order to compare countries’ achievements in the last decade (2010−2020). The last ten years’ analysis allows us to identify the direction of individual countries in develo... [more]

Poly-generation systems are an exciting new technology that provide an alternative to separating existing energy production methods in buildings. A poly-generation system enables the efficient simultaneous production of heating, cooling, fresh water, and electricity, resulting in many technological, economic, energy recovery, and environmental advantages. This study numerically investigates three proposed novel solar-driven poly-generation systems (BS, IS-I, and IS-II) integrated with organic Rankine cycle (ORC), humidification-dehumidification desalination system (HDH), and desiccant cooling system (DCS) with different heat recovery system arrangements. The suggested systems supply residential structures with energy, space conditioning, domestic heating, and fresh water. The effects of system operating circumstances on productivity and performance characteristics and several organic working fluid types (n-octane, R245fa, R113, isopentane, and toluene) on optimum system performance hav... [more]

Fertilization is an essential element in plant cultivation. Supplying the right amounts of nutrients allows plants to grow and develop. Due to the rising price of mineral fertilizers, other fertilizers and soil conditioners are growing in importance. One of these is the digestate produced in agricultural biogas plants. Due to its properties, the digestate can be used directly as a fertilizer. In this case, the effects of application can both change the soil environment and directly affect plant growth. Physical, biological, and thermal transformations can also produce products based on the digestate or its fractions, which can be successfully used for fertilizer purposes. Among other things, this paper discusses the production and use of composts, biocarbon, and/or fertilizer granules from the solid fraction of the digestate. Numerous scientific studies, including the authors’ own research in this article, indicate that digestate can be successfully used as fertilizer, both without pro... [more]

Road transportation has received the attention of researchers due to its higher carbon footprint. Alternative fuels present major advantages in terms of environmental sustainability. For this reason, an enviro-economic analysis of alternative fuels carries great significance. However, scarce attempts have been rendered in order to ascertain the impact of a hydroxy gas (HHO) and compressed natural gas (CNG) mixture on sustainable environmental development. The current study addresses this issue by employing an HHO−CNG mixture and gasoline in spark ignition (SI) engines for the purposes of performance and environmental pollutants measurement. Then, engine emission data were substituted for Weibull distribution in order to establish suitability for 50 and 95% confidence intervals (CIs). The mixture outperformed gasoline in terms of brake-specific fuel consumption (BSFC) and emission contents. On average, hydroxy gas with CNG produced 10.59% lower oxides of nitrogen (NOX) comparative to ga... [more]

Graptolite-rich shale is the main layer of shale gas resources in the southern marine sedimentary basin. Recently, shale gas resources were discovered in the Ordovician marine graptolite-rich strata in the Ordos Basin. The graptolite shale in the study area is different from the marine graptolite shale in the Yangtze plate in southern China, and further exploration is needed. This paper presents core samples of the graptolite-rich shale of the Pingliang Formation in the southwest Ordos Basin as research objects. The graptolite genus and graptolite shale characteristics were studied using core observation, electron microscopy, scanning electron microscopy, and geochemical analysis. We determined the role of the sedimentary environment and thermal maturation of graptolite shale in hydrocarbon formation and explored the possibility of hydrocarbon generation. Many graptolite epidermises provide buried organic matter. The quiet sea and low-energy marine environment create favorable conditio... [more]

With smart grid advances, enormous amounts of data are made available, enabling the training of machine learning algorithms such as deep reinforcement learning (DRL). Recent research has utilized DRL to obtain optimal solutions for complex real-time optimization problems, including demand response (DR), where traditional methods fail to meet time and complex requirements. Although DRL has shown good performance for particular use cases, most studies do not report the impacts of various DRL settings. This paper studies the DRL performance when addressing DR in home energy management systems (HEMSs). The trade-offs of various DRL configurations and how they influence the performance of the HEMS are investigated. The main elements that affect the DRL model training are identified, including state-action pairs, reward function, and hyperparameters. Various representations of these elements are analyzed to characterize their impact. In addition, different environmental changes and scenarios... [more]

The aim of this paper was to evaluate the characteristics and the energy potential for the methane production of fine screenings collected from the primary stage of a municipal wastewater treatment plant, and assess the impact on the properties and the oxygen demand of the aqueous effluents downstream from the sieves. Commercial filter bags with sieve openings of 3000, 1250, 1000, and 300 μm were used for the collection of screenings following a measurement of their biochemical methane potential. It was revealed that solid fractions from the sieves with a large size presented a high net methane production capacity exceeding 900 mL/g VS, but the gas production rate was rather slow, requiring a long time to reach the final value. However, cumulative solid fractions containing particles with a size larger than 300 μm had a lower net methane production, about 700 mL/g VS, but with a faster rate, resulting in almost 80% of the total volume released in 30 days. Aqueous samples downstream fro... [more]

The built environment sector is responsible for a significant proportion of the final global energy consumption [...]

In the research carried out by the authors, an approach to the assessment of the project environment of technologically integrated “European Green Deal” projects using corn waste was developed, which takes into account the changing project environment, which determines the risk of the specific cost of disposal of corn waste. On the basis of the predicted approach and the established trends of changes in the specific volume of corn food products from its yield, as well as the specific cost of disposal of corn waste from its specific volume under the condition of maintaining the balance of organic carbon in the fields, a computer program in the Python 3.9 language was developed. The program makes it possible to speed up calculations and perform a quantitative assessment of the state of the project environment in certain regions of the implementation of projects of the “European Green Deal” (TIP of the EGD) using corn waste. An approach to assessing the state of the project environment of... [more]