Road lighting uniformity is an essential lighting quality parameter for motorists and pedestrians and varies with lighting design parameters. Increased road lighting uniformity may result in benefits, such as increased reassurance and perceived safety for pedestrians or an increased overall visual perception. However, no previous study has investigated how road lighting uniformity varies with lighting design scenarios or how the uniformity of various lighting design scenarios affects other essential parameters, such as energy performance and obtrusive light. This study aimed to investigate: (I) how uniformity varies with different road lighting design scenarios, and (II) how uniformity correlates with energy performance and risk for increasing spill light. The study is limited to pedestrian roads. We performed photometric calculations in ReluxDesktop for more than 1.5 million cases with single-sided pole arrangements and for various geometries of road width, pole distance, pole height,... [more]

Dry reforming of methane (DRM) has important and positive environmental and industrial impacts, as it consumes two of the top greenhouse gases in order to produce syngas (H2 and CO) and thus hydrogen (H2). The performance of DRM of conversions of CH4 and CO2 was investigated over Ni/ZrO2 catalysts. The catalytic performance of all prepared catalysts for DRM was assessed in a micro-tubular fixed bed reactor under similar reaction conditions (i.e., activation and reaction temperatures at 700 °C, a feed flow rate of 70 mL/min, reaction temperature, and a 440 min reaction time). Various characterization techniques, such as BET, CO2-TPD, TGA, XRD, EDX, and TEM, were employed. The zirconia support was modified with MgO or Y2O3. The yttria-stabilized zirconia catalyst (5Ni15YZr) provided the optimum activity performance of CH4 and CO2 conversions of 56.1 and 64.3%, respectively, at 700 °C and a 70 mL/min flow rate; this catalyst also had the highest basicity. The Ni-based catalyst was promote... [more]

For an organisation, one aspect on the path to a decarbonised future is the cost-optimal decarbonisation of their facilities’ energy systems. One method to guide the decarbonisation is internal carbon pricing. However, the design process of decarbonisation pathways, guided by internal carbon prices, can be challenging, since the energy system environment consists of many uncertainties. Despite the numerous uncertainties and existing methods to address uncertainties during the optimisation process, the optimisation of a facility’s energy system is often done by assuming perfect knowledge of all relevant input parameters (deterministic optimisation). Since real-world decisions can never be based on perfect knowledge and certain decisions might lead to path dependencies, it is important to consider the robustness of a solution in the context of developments that vary from the assumed scenarios. So far, no academic work has analysed the potential benefits of using an optimisation method th... [more]

RM (red mud), which comes from the Bayer process, has a huge annual output and is harmful to the environment. Because of the high iron content in RM, the process of iron recovery from RM can reduce the amount of RM well and create economic benefits, so it is a promising process. The paper focuses on the review on the research of the iron recovery method from RM, which includes the physical recovery method, chemical recovery method and emerging recovery method. By comparing the advantages and disadvantages of these processes, it is concluded that the fluidized bed reduction is a promising process that can be rapidly applied to the industry, but it still needs more investigation to overcome the current technical difficulties in the near future.

There is growing concern that airtight and well-insulated buildings designed to limit heat loss in temperate and cold climates could unintentionally elevate the risk of overheating in summers. Existing literature primarily uses dynamic simulation to investigate this problem due to the difficulty of obtaining large-scale in-performance data. To address this gap, we undertake a meta-analysis of large-scale indoor air temperature data for 195 UK dwellings, as a study of performance in a temperate climate. Of these, 113 are baseline (i.e., typical existing dwellings) and the rest designed to the high-performance Passivhaus standard. Using both Passivhaus and the well-known CIBSE TM59 overheating standards, this study found that there were few overheated cases for any building type. However, the average summer nighttime temperature of Passivhaus bedrooms was 1.6 °C higher than baseline, with 20 out of 31 measured bedrooms exceeding the overheating criterion, and the average overheating hour... [more]

Fine and ultrafine grinding of limestone are frequently used in the pharmaceutical, chemical, construction, food, and cosmetic industries, however, research investigations have not yet been published on the combination of energy and life cycle modeling. Therefore, the first aim of this research work was the examination of main grinding parameters of the limestone particles to determine an empiric energy-model. Dry and wet grinding experiments have been carried out with a Bond mill and a laboratory stirred ball mill. During the grinding processes, the grinding time and the filling ratio have been adjusted. The second goal of this research assessed the resources, emissions and environmental impacts of wet laboratory grinding with the help of life cycle assessment (LCA). The life cycle assessment was completed by applying the GaBi 8.0 (version: 10.5) software and the CML method. As a result of research, the determination of an empiric energy-model allowed to develop an estimated particle... [more]

Passive small direct alcohol fuel cells (PS-DAFCs) are compact, standalone devices capable of electrochemically converting the chemical energy in the fuel/alcohol into electricity, with low pollutant emissions and high energy density. Thus, PS-DAFCs are extremely attractive as sustainable/green off-grid low-power sources (milliwatts to watts), considered as alternatives to batteries for small/portable electric and electronic devices. PS-DAFCs benefit from long life operation and low cost, assuring an efficient and stable supply of inherent non-polluting electricity. This review aims to assess innovations on PS-DAFC technology, as well as discuss the challenges and R&D needs covered on practical examples reported in the scientific literature, since 2018. Hence, this compilation intends to be a guidance tool to researchers, in order to help PS-DAFCs overcome the barriers to a broad market introduction and consequently become prime renewable energy converters and autonomous micropower gen... [more]

Economic development is mainly dependent on fossil fuels. The massive use of fossil fuels has led to changes in the climate environment, in which the deterioration of air quality has affected people’s daily lives. This paper introduces the green growth level as a control variable to explore the connection between carbon dioxide emissions and the level of economic growth. It uses the EKC algorithm and VEC model to analyze Nanjing city’s data from 1993 to 2018. Given the data availability, the ARIMA algorithm was used to project carbon emissions for 2019−2025. It is found that the EKC curve of Nanjing City shows an N-shape, and the growth of economic level will cause the enhancement of carbon dioxide emissions. Carbon emissions will reach 7,592,140 tons in 2025. At present, we are in an essential stage of transition from N-shape to inverted U-shape, and this paper makes several recommendations based on the findings.

No systematic comparative study has been conducted on the factors controlling organic matter enrichment in the different depositional environments of the Lower Cambrian Qiongzhusi Formation in the western Middle Yangtze Block, leading to a large discrepancy in our understanding. Based on organic geochemical and elemental analyses of core, outcrop, rock, and mineral samples from the slope, deep-water shelf, and shallow-water shelf, in this study, comparative analysis of the organic matter content, sedimentological characteristics, and depositional paleoenvironments of the Lower Cambrian Qiongzhusi Formation in the western Middle Yangtze Block was conducted, and the main controlling factors and models of the organic matter enrichment were investigated. The results revealed that the organic matter enrichment in the Qiongzhusi Formation was jointly controlled by redox conditions, water restriction, upwelling currents, terrigenous inputs, and paleo-productivity, but the main factors control... [more]

Non-renewable-resource consumption and global greenhouse-gas (GHG) emissions are critical issues that pose a significant threat to sustainable development. Solar energy is a promising source to generate renewable energy and an appealing alternative electricity source for households. The primary goal of this research is to detect the rooftops that have no solar photovoltaic (PV) system deployed on them but that receive moderate to high solar-energy radiation using the Geographic Information System (GIS) and deep-learning techniques. Although various studies have been conducted on this subject, not many addressed these two issues simultaneously at a residential level. Identifying the installed solar PV systems in a large area can be expensive and time-consuming work if performed manually. Therefore, the deep-learning algorithm is an emerging alternative method to detect objects using aerial images. We employed the Single-Shot-Detector (SSD) model with the backbone of residual neural netw... [more]

A 1000 Nm3/h capacity pilot scale dual baghouse filter system was tested on flue gas and fly ash from a municipal solid waste incinerator, and the removal efficiency of dioxins, heavy metals and HCl was studied. Activated carbon was injected at the inlet of the first baghouse filter to remove the gas phase dioxins and heavy metals, and baking soda was injected at the inlet of the second baghouse filter to remove HCl. Concentrations of dioxins at the outlet of the first and second baghouse were 0.034 and 0.011 ng TEQ/Nm3, respectively, which were both far below the national emission standard. The particulate matter concentration was 0.85 mg/m3, and the heavy metals leaching concentration of the fly ash from the second baghouse filter was lower than the hazardous waste identification standard. HCl concentration was almost zero at the outlet of the second baghouse filter when the optimal equivalence ratio of baking soda to HCl was 1.6. In addition, the estimated fly ash yield was 2.35% of... [more]

The use of sustainably sourced biomass is an important tool for mitigating the effects of climate change; but biomass is far from being a homogeneous resource. The aim of this study was to examine the decision-making process of industrial end-users considering biomass procurement. An online, two-part survey generated responses from 27 experienced professionals, representing a portfolio of facilities varying in size, technology, and biomass types, across Australia, Canada, Finland, and Sweden. A PAPRIKA conjoint analysis approach was used to analyze the data so that the attributes that influenced procurement decisions could be weighted and ranked. The results provided an insight into end-users’ views on factors including facility location, size, and biomass storage, handling, and procurement for different wood-based industrial services. The most important decision-making attribute appeared to be the type of biomass assortment, at individual, national, and aggregated levels. Of seven sub... [more]

This study addresses the output impedance model of the LCL-type grid-connected converter considering the dead-time effects and the digital control delay. The model shows that the digital control delay will affect the accuracy of the output impedance of the grid-connected converter, and the dead-time effects are only equivalent to superimposing a disturbance voltage on the original output impedance model. The derived output impedance model is verified by comparing it with the switching model in the PSIM simulation environment. The harmonic interaction between converter cluster and utility grid is modeled and analyzed based on the output impedance model. A combined harmonic suppression strategy is incorporated into every converter control scheme to suppress the harmonic interaction. Simulation results are presented to demonstrate the correctness of harmonic interaction analysis and the effectiveness of the proposed suppression strategy.

The gas−solid interface of high-voltage insulating equipment is a weaker part of insulating equipment insulation, and preventing the occurrence of discharge along the surface of insulating equipment is a critical problem for high-voltage insulation. This article investigates the discharge characteristics and charge movement characteristics of insulating media under an airflow environment. The surface discharge characteristics of the insulating medium in the airflow environment were obtained by using a high-velocity airflow test platform, and the surface discharge voltage characteristics, discharge path characteristics, and force conditions of the discharge process were analyzed. The surface charge motion characteristics of the insulating medium in the high-velocity airflow environment were also tested, and the distribution characteristics, dissipation characteristics and conduction mechanism of the surface charge of the insulating medium in the high-velocity airflow environment were re... [more]

Energy transition forcing a change in the structure of the electricity generation system is a particularly difficult task in countries such as Poland, where the dominant source of energy is fossil fuels. Due to the nature of renewable sources (stochastic and seasonally variable), it is necessary to study their impact on the power system. Much research was conducted on this subject. They consider modelling power systems in terms of dealing with an increasing amount of renewable energy sources, stabilization of electricity generation or environmental aspects. This article examines one of the key sources of future power systems—offshore wind turbines (OWT). The influence of offshore wind sources on the power system in the fields of stability of generation, methods of regulatory strategies, and economics were examined. One of the aspects that are less considered is the correlation of energy production in OWT with energy demand and with generation in other renewable energy sources, especial... [more]

Solid hydrochar (HC) produced by hydrothermal carbonization (HTC) of tomato plant biomass from a greenhouse (GH) was assessed for different inhouse applications, including fuel, seed germination, and leached GH nutrient feed (GNF) wastewater treatment. Completed experiments showed encouraging results. HC was revealed to be an efficient renewable fuel, having peat-like characteristics with high heating value of about 26.0 MJ/kg and very low clinker forming potential. This would allow the use of HC as fuel for GH heating as a substitute to costly natural gas, or it could be commercialized after pelletizing. Experiments with soil application showed substantial potential for the produced HC in better seed germination of tomato plants. Another benefit from use of the produced HC is as a soil additive, which would also contribute to environmental emission reduction. Results suggest that the generated HC can remove about 6−30% of nutrients from leached-GNF wastewater. This would be an essenti... [more]

In 2017, China made an ambitious statement of high-quality development (HQD) with which to realize the goals of sustainability proposed by the United Nations. Our paper sheds new light on how the corporate high-quality development is affected by the responsibility system for environmental protection targets using a sample of energy-intensive firms from 2003 to 2018. We calculate the indexes for corporate high-quality development using entropy weighting for the five dimensions: efficiency, innovation, openness, greenness, and social responsibility. Then, we develop a difference-in-differences model to reveal that the responsibility system for environmental protection targets significantly dampens high-quality development of corporations, as the estimated coefficient is −0.0420 with a t-statistic of −2.9384. In contrast with private firms, the high-quality development of state-owned firms shows no significant correlation with environmental policy constraints. The efficiency of capital al... [more]

The growth of renewable energy facilities worldwide creates new challenges for sustainable regional development. Unregulated investment flows in the green energy sector cause disparities in the deployment of various renewable energy technologies, worsen the ability to balance national energy systems, etc. This article is the first comprehensive study that offers a methodology for multifactor modeling of investment flows in regional green energy deployment considering the priorities of national, regional, and local authorities within the sustainable development concept. The proposed methodological approaches help (1) determine the types of renewable energy technologies for priority development in the region, (2) select specific green energy projects to receive budgetary support on territories, and (3) form the optimal mechanism for budget financing distribution on regional development of renewable energy technologies. The modeling factors include natural conditions and resource base of... [more]

In the present work, the contemporary exhaust gas treatment systems (EGTS) used for SOx, PM, and NOx emission mitigation from shipping are reviewed. Specifically, after-treatment technologies such as wet scrubbers with seawater and freshwater solution with NaOH, hybrid wet scrubbers, wet scrubbers integrated in exhaust gas recirculation (EGR) installations, dry scrubbers, inert gas wet scrubbers and selective catalytic reduction (SCR) systems are analyzed. The operational principles and the construction specifications, the performance characteristics and the investment and operation of the reviewed shipping EGTS are thoroughly elaborated. The SCR technology is comparatively evaluated with alternative techniques such as LNG, internal engine modifications (IEM), direct water injection (DWI) and humid air motor (HAM) to assess the individual NOx emission reduction potential of each technology. Detailed real data for the time several cargo vessels spent in shipyards for seawater scrubber i... [more]

The pressure bleed-down/build-up (B/B) testing is enforced by the Bureau of Safty and Environmental Enforcement (BSEE) regulations in the US for gas-leaking wells with recurrent casing head annular pressure dubbed “Sustained Casing Pressure” (SCP). The bleed down test involves bleeding the pressure with a needle valve. Once the pressure reached to zero or stabilized, the valve is closedand a 24-h pressure monitoring starts. Analysis of the tests mandated by regulations involves merely a qualitative assessment of the low or high level of environmental risk measured by leak size. A quantitative analysis—based on mathematical models—has been already proposed and used for sizing cement leaks but the models give ambiguous results due to oversimplifying assumptions of the cement leak system and disregard for the testing procedure. This work addresses shortcomings of the current B/B testing and analysis methods by approaching the testing procedure as a source of useful information about the s... [more]

Several studies have reported that the hydrothermal carbonization method (HTC) of agricultural waste is able to produce a solid residue with interesting properties for the adsorption of organic pollutants from contaminated water. This work represents a facile method to prepare hydrochar (HC) from pomegranate peels’ waste using the microwave-assisted hydrothermal carbonization method (MHTC) at 200 °C for 1 h with a mass ratio of peel to water = 1:10. Activated hydrochar (AHC) was prepared by in situ chemical activation using ZnCl2 and MHTC. Several techniques have been applied to characterize the prepared samples as FTIR, XRD, TEM and SEM. The samples were investigated for their possible use as adsorbents of methylene blue (MB) dye. The results confirm the formation of amorphous hydrochar with a porous structure. The pH of zero point charge (pHzpc) is 4.3 and 4.6 for HC and AHC samples, respectively. The maximum adsorption capacity of HC and AHC samples are 194.9 and 12.55 mg/g (i.e., m... [more]

The developed production of heat (steam) by Farmutil Company enables use of renewable energy from biofuel meat-bone meal which is incinerated in rotary kilns utilising vapours and odours from its production, instead of natural gas, to ensure Farmutil’s own needs for heat. The transformation of existing district heating in Piła city (currently using coal) into a fourth generation district heating system was proposed, predicting the use of heat (hot water) after combustion of biofuel meat-bone meal as district heating in the city of Piła. The maximum possible surplus amount of heat that can be produced at Farmutil exceeds the needs for the district heating demands of the city of Piła (860,200 GJ/y) by 53.2% at a meat-bone meal burning scale of 150,000 t/y. The use of 52,000 t/y of meat-bone meal for district heating production also results in an increase in incomes through the sale of hydroxyapatite ash from its combustion, amounting 1.638 million EUR/y. The closure of the coal-fired hea... [more]

Environmental protection, sustainable development, quality, and value have become the goals of societal development in the twenty-first century. As the core of environmental protection, the new energy sector has become a widespread trend. In this article, we will look at how well and how satisfied customers are with the energy market’s service. A literature review of energy sector quality and value issues was conducted. The survey was conducted in 2021 in Poland with over 2404 respondents by the CAWI survey. Additionally, it was given a qualitative analysis. In the next step, we applied selected quality management methods and tools. The results of the study clearly show that the respondents expect energy companies to become more involved in building customer−enterprise relationships. Research shows that employees of energy companies should be trained more often in the field of customer service, especially in terms of an individual approach to the customer, which has value for the custo... [more]

In Poland, coal-based thermal energy for cooling power plant installations uses a large amount of surface water. Historically, there have been cases of limitations in electricity supply due to low water levels and high temperature of water in rivers. Moreover, environmental requirements limit the possibility of using water resources for cooling purposes, pointing to the necessity to leave inviolable flows in rivers. This raises questions about the future of the operation of thermal power plants with open cooling systems and hence the research undertaken by the authors. The research consisted of a questionnaire survey, hydrological analyses, the impact assessment of climate change on the operation of power plants, and a discussion of technical solutions for water abstraction and power loss analysis in a particular power plant. The results indicate that there are power plants that are more sensitive to hydrological and environmental conditions and the temperature of the water required fo... [more]

The analytical hierarchy process (AHP) was utilized to determine the optimal location on which to install flat-plate solar thermal collectors for residential buildings in a number of cities in Iran under diverse climatic conditions. The payback period of investment (IPBP) was chosen as one of the decision criteria, while payback periods of energy and greenhouse gas emissions (EPBP and GGEPBP), being two recently introduced concepts, were also taken into account to provide a broader insight from the energy, economic, and environmental (3E) benefits of the system. The novelty of this work is proposing a method to find places with the greatest potential to install flat-plate solar collectors. It was performed using AHP as a systematic decision-making tool, and based on energy, environmental, and economic criteria, which are the key aspects of an energy system. Codes developed in the MATLAB software were employed to determine the values for different investigated cities. According to the r... [more]