The operation of electrical systems is becoming more difficult due to the intermittent and seasonal characteristics of wind and solar energy. Such operational challenges can be minimized by the incorporation of energy storage systems, which play an important role in improving the stability and reliability of the grid. The economic viability of hybrid power plants with energy storage systems can be improved if regulations enable the remuneration of the various ancillary services that they can provide. Thus, the aim of this study is to provide a literature review regarding the economic feasibility of hybrid wind and solar photovoltaic generation with energy storage systems and its legal and regulatory aspects. Observing the global tendency, new studies should address the technical and economic feasibility of hybrid wind and solar photovoltaic generation in conjunction with, at least, one kind of energy storage system. In addition, it is very important to take into account the regulatory... [more]

Considering the pressing challenges of supply security and climate change, advanced processes to produce electricity and biofuels from biomass have to be developed. Biomass gasification is a very promising technology, but there is a lack of comprehensive reviews, specifically on the technologies for hydrogen chloride hot gas cleanup, which are necessary in order to work at the same temperature and respect the limits of advanced downstream components. In this review, the Cl content of the main biomasses in Europe is given, and data on syngas content and the tolerance of downstream equipment are highlighted. Hot gas cleaning technologies, which have the advantage of improved thermal efficiency are reviewed, analyzing the thermodynamic and primary and secondary methods. This review identifies NaAlO2 and Na2CO3 within 450−550 °C as the most effective sorbents, which are able to reduce the concentration of HCl below 1 ppm. Nevertheless, H2S cannot be simultaneously removed and has... [more]

The accurate determination of the gas in place in shale reservoirs is a basic but challenging issue for shale gas evaluation. Conventional canister gas desorption tests on retrieved core samples and subsequent data analyses (via linear or polynomial regression)—originally developed for coalbed methane, where gases are mainly stored in the adsorbed phase—is unadvisable for shale gas, which is stored as an appreciable amount of free gas in shale reservoirs. In the present study, a mathematical model that simultaneously takes into account gas expansion, adsorption/desorption, and the gas flow in shale is proposed to simulate gas release from a core sample retrieved from the Lower Silurian Longmaxi Formation of the Fuling shale gas field, Sichuan Basin. The results indicate that, compared with the value of 2.11 m3/t rock estimated with the traditional United States Bureau of Mines (USBM) method, the total gas in place within the studied Longmaxi Shale estimated with our mathematical model... [more]

The re-use of wastewater is an increasingly important subject. Most recently, several attempts were reported to convert wastewater in harmless or even valuable substances by the use of electrical current. Electrochemistry is an old approach. The renewed interest stems from the fact that electrical current is often available in abundance, for example from solar energy in arid regions, while clean water is not. Experimentally, one has to deal with very many products which are the result of many reaction steps. Here, theory can help. Using Car−Parrinello molecular dynamics, we simulate the first few reaction steps of the electrolysis of wastewater. On the basis of previous studies, we investigate the reaction of carbon dioxide and nitrogen compounds. The results show a great variety of reaction steps and resulting products. Some of them are technologically interesting, such as hydrogen and formic acid.

In the coming decades, the European energy system is expected to become increasingly reliant on non-dispatchable generation such as wind and solar power. Under such a renewable energy scenario, a better characterization of the extreme weather condition ‘Dunkelflaute’, which can lead to a sustained reduction of wind and solar power, is important. In this paper, we report findings from the very first climatological study of Dunkelflaute events occurring in eleven countries surrounding the North and Baltic Sea areas. By utilizing multi-year meteorological and power production datasets, we have quantified various statistics pertaining to these events and also identified their underlying meteorological drivers. It was found that almost all periods tagged as Dunkelflaute events (with a length of more than 24 h) are in November, December, and January for these countries. On average, there are 50−100 h of such events happening in each of these three months per year. The limited wind and solar... [more]

This paper provides a comprehensive review and critical analysis of the latest research results in addition to an overview of the future challenges and opportunities regarding the use of hydrogen to power internal combustion engines (ICEs). The experiences and opinions of various international research centers on the technical possibilities of using hydrogen as a fuel in ICE are summarized. The advantages and disadvantages of the use of hydrogen as a solution are described. Attention is drawn to the specific physical, chemical, and operational properties of hydrogen for ICEs. A critical review of hydrogen combustion concepts is provided, drawing on previous research results and experiences described in a number of research papers. Much space is devoted to discussing the challenges and opportunities associated with port and direct hydrogen injection technology. A comparison of different fuel injection and ignition strategies and the benefits of using the synergies of selected solutions... [more]

In this paper, the problem of estimating the core losses for inductive components is addressed. A novel methodology is applied to estimate the core losses of an inductor in a DC-DC converter in the time-domain. The methodology addresses both the non-linearity and dynamic behavior of the core magnetic material and the non-uniformity of the field distribution for the device geometry. The methodology is natively implemented using the LTSpice simulation environment and can be used to include an accurate behavioral model of the magnetic devices in a more complex lumped circuit. The methodology is compared against classic estimation techniques such as Steinmetz Equation and the improved Generalized Steinmetz Equation. The validation is performed on a practical DC-DC Buck converter, which was utilized to experimentally verify the results derived by a model suitable to estimate the inductor losses. Both simulation and experimental test confirm the accuracy of the proposed methodology. Thus, th... [more]

Ocean energy is a kind of renewable energy contained in seawater, which has the characteristics of large total reserves, sustainable use, and its being green and clean. Influenced by rising oil prices and global climate change, an increasing number of countries are attaching great importance to the strategic position of ocean energy in the future energy sector, and are formulating national ocean energy development roadmaps and conducting research and development on ocean energy technologies. Ocean current energy is a widely existing kind of ocean energy with abundant reserves. However, due to the low current velocity in most of the deep sea, low current energy has not been effectively exploited. In this paper, the Blade element momentum (BEM) theory based on Vortex column theory is used to design a special airfoil for low current energy applications, and a prototype turbine with rotor diameter of 4.46 m and tip speed ratio (TSR) of 6 is fabricated. In order to achieve stable electric p... [more]

In this study, biological exhaust air treatment was combined with a recuperative heat exchanger in one process stage. The aim of this plant development and testing is not only to reduce ammonia from the exhaust air of pig houses but also to recover thermal energy at the same time. This is intended to offset the high operating costs of exhaust air treatment with savings of heating costs in cold seasons and to use the plant more efficiently. This system was tested for the first time under practical conditions in a pig fattening house in southern Germany. Three different assembly situations of the heat exchanger were examined for 13 days each and then compared with each other. The heating performance of the plant is primarily dependent on the outside air temperature and secondarily on the scrubbing water temperature. Depending on the assembly situation of the heat exchanger, an average heating performance of between 6.0 and 10.0 kW was observed; the amount of recovered thermal energy was... [more]

Energy piles, combined ground source heat pumps (GSHP) with the traditional pile foundation, have the advantages of high heat transfer efficiency, less space occupation and low cost. This paper summarizes the latest research on the heat transfer and bearing capacity of energy piles. It is found that S-shaped tubes have the largest heat transfer area and the best heat transfer efficiency; that energy piles need to be designed conservatively, such as adjusting the safety coefficient, number and spacing of the piles according to the additional temperature loads; and that unbalanced surface temperature has not been resolved, caused by uneven refrigeration/heating demand in one cycle. A composite energy pile applied to water-rich areas is proposed to overcome the decay of bearing and heat transfer performance. Besides, most of the heat transfer models are borehole-oriented and will fit for energy piles effectively if the models support variable ground temperature boundary conditions.

The development of wind-power engineering in the Arctic has led to increasing wind turbines in cold climatic zones. A problem operating wind turbines in cold conditions is the icing of blades. The icing of the blades leads to a change in rotor aerodynamics, a decrease in energy production, the additional weight of blades, and load on the rotor, which increase wear and reduce the lifetime of the turbines. The growth of icing on the blades threatens the uncontrollable separation of ice pieces from the blade edges, and the operation is unsafe. Non-contact methods for detecting icing on the blades need to prevent critical operating modes with ice formation on the blades. This review analyzes methods for detecting icing. The advantages and disadvantages of various optical methods are presented to give valuable insights on ice prevention for wind turbines operating in cold regions.

A conventional electrical grid mostly depends on the electrical power generated from fossil fuels. However, the pollutants from fossil fuels are the key factors for adverse climate change. Most of the developed countries of the world have already recognized the fact that the energy mix requires to be diversified by incorporating renewable energy. This is especially relevant for a good number of the member countries of the Organization of Islamic Cooperation (OIC), as much of their electric power is still generated from fossil fuels due to the relative abundance of fossil fuels in those countries. In order to integrate renewable energy sources into the hybrid energy mix, an existing conventional grid needs to undergo drastic changes. Alongside this, the population boom in the OIC member countries has caused higher demand for a steady supply of electricity that the conventional grids have long been struggling to cope with. With a view to solving this multifaceted problem, incorporation o... [more]

FMEA analysis is a tool of quality improvement that has been widely used for decades. Its classical version prioritizes risk of failure by risk priority number (RPN). The RPN is a product of severity (S), occurrence (O), and detection (D), where all of the factors have equal levels of significance. This assumption is one of the most commonly criticized drawbacks, as it has given unreasonable results for real-world applications. The RPN can produce equal values for combinations of risk factors with different risk implications. Another issue is that of the uncertainties and subjectivities of information employed in FMEA analysis that may arise from lack of knowledge, experience, and employed linguistic terms. Many alternatives of risk assessment methods have been proposed to overcome the weaknesses of classical FMEA risk management in which we can distinguish methods of modification of RPN numbers of employing new tools. In this study, we propose a modification of the traditional RPN num... [more]

Natural disasters can lead to large-scale power outages, affecting critical infrastructure and causing social and economic damages. These events are exacerbated by climate change, which increases their frequency and magnitude. Improving power grid resilience can help mitigate the damages caused by these events. Mobile energy storage systems, classified as truck-mounted or towable battery storage systems, have recently been considered to enhance distribution grid resilience by providing localized support to critical loads during an outage. Compared to stationary batteries and other energy storage systems, their mobility provides operational flexibility to support geographically dispersed loads across an outage area. This paper provides a comprehensive and critical review of academic literature on mobile energy storage for power system resilience enhancement. As mobile energy storage is often coupled with mobile emergency generators or electric buses, those technologies are also consider... [more]

The deformation analysis of fractures is vital for advantageous development of oil and gas fields, especially the coalbed methane (CBM) reservoir, since the change of fracture parameters can be directly evaluated through fracture deformation analysis. Then the flow capacity of CBM and the effect of various stimulation methods can be analyzed. In this study, X-ray CT image analysis is used to quantitatively characterize the deformation of a coal fracture in situ, and the evolution of fracture aperture under cyclic loading is presented. Furthermore, dimensionless permeability at different confining pressures by the Lattice Boltzmann method is simulated. The current results indicate that the fracture deformation changes significantly under cyclic loading. A dramatic change is observed in the initial loading stage, in which the coal is strongly compacted, and the fracture aperture and permeability are reduced to 13.9% and 0.1%, respectively, when the confining pressure is loaded to 10 MPa.... [more]

Investigation of a new type of fuel for the internal combustion engine, which can be successfully used in both the power generation and the automotive industries, is presented in this article. The proposed fuel is a blend of 75% n-butanol and 25% glycerol. The engine tests conducted with this glycerol−butanol blend were focused on the performance, combustion thermodynamics, and exhaust emissions of a spark-ignition engine. A comparative analysis was performed to find potential similarities and differences in the engine fueled with gasoline 95 and the proposed glycerol−butanol blend. As measured, CO exhaust emissions increased, NOx emissions decreased, and UHC emissions were unchanged for the glycerol−butanol blend when compared to the test with sole gasoline. As regards the engine performance and combustion progress, no significant differences were observed. Exhaust temperature remarkably decreased by 3.4%, which contributed to an increase in the indicated mean effective pressure by ap... [more]

Since energy transition has become a necessity, many countries are developing decarbonization plans and looking for ways to reduce CO2 emissions. The process takes different forms, most often being affected by local conditions, which means that it takes place in each country differently, due to the country’s social and economic specifics. One of the countries that has just started its energy transition process is Poland. The case of Poland is extremely interesting, as it is a country whose economy is still heavily dependent on coal and there are very strong traditions related to this particular source of energy. On the other hand, Poland has two very good reasons to move away from coal. The complexity and comprehensiveness of the energy transition results, among other things, from the diversity of actors involved in this issue and the multiplicity of their, often conflicting, interests. Using a critical discourse analysis, this paper attempts to show how those actors attempt to shape t... [more]

This article presents the results of laboratory tests regarding the influence of high temperatures on changes in the strength and structural parameters of rocks that are present in the immediate vicinity of a gasification channel. Sandstone and claystone samples were heated at 300 °C, 600 °C, 900 °C and 1200 °C. Additionally, the heated samples were placed in water for 24 h. The results of the laboratory tests were used in the numerical simulation using RS2 software. The main goal of modeling was to determine the extent of the rock destruction zone around the gasification channel for dry and wet rock masses. In the numerical simulations, three widths of the gasification channel and three ranges of high-temperature impact were modeled. On the basis of the obtained results, it was found that the extent of rock destruction, both in the roof and in the floor, is greater by several percent for a wet rock mass. For the first time, this research presents the effect of water on heated rock sam... [more]

The housing sector is one of the largest energy consumers in the world. There is an urgent need to renovate the housing stock of existing buildings. Therefore, it is necessary to correctly calculate the energy savings that can be obtained in a renovation project. The correct collection of energy data, the main variables that affect consumption, and people’s usage habits are fundamental elements to quantify the success or consequences that occur in an energy efficiency project. This research study quantifies the results of the energy savings of the European project DREEAM (District Scale Renovation for Energy Efficiency and Market Uptake). This article aims to facilitate the calculation of energy savings with mathematical linear regression models in two different climatic zones in Europe. Furthermore, it aims to improve the calculation of energy savings with mathematical models based on energy data and variables that affect consumption before and after renovations. The variables used fo... [more]

Jet impingement is considered to be an effective technique to enhance the heat transfer rate, and it finds many applications in the scientific and industrial horizons. The objective of this paper is to summarize heat transfer enhancement through different jet impingement methods and provide a platform for identifying the scope for future work. This study reviews various experimental and numerical studies of jet impingement methods for thermal-hydraulic improvement of heat transfer surfaces. The jet impingement methods considered in the present work include shapes of the target surface, the jet/nozzle−target surface distance, extended jet holes, nanofluids, and the use of phase change materials (PCMs). The present work also includes both single-jet and multiple-jet impingement studies for different industrial applications.

This paper compares active and passive cooling systems in tidal turbine power electronic converters. The comparison is based on the lifetime of the IGBT (insulated gate bipolar transistor) power modules, calculated from the accumulated fatigue due to thermal cycling. The lifetime analysis accounts for the influence of site conditions, namely turbulence and surface waves. Results indicate that active cooling results in a significant improvement in IGBT lifetime over passive cooling. However, since passive cooling systems are inherently more reliable than active systems, passive systems can present a better solution overall, provided adequate lifetime values are achieved. On another note, the influence of pitch control and active speed stall control on the IGBT lifetime was also investigated. It is shown that the IGBT modules in pitch-controlled turbines are likely to have longer lifetimes than their counterparts in active stall-controlled turbines for the same power rating. Overall, it... [more]

Forecasting uncertainties limit the development of photovoltaic (PV) power generation. New forecasting technologies are urgently needed to improve the accuracy of power generation forecasting. In this paper, a novel ultra-short-term PV power forecasting method is proposed based on a deep belief network (DBN)-based Takagi-Sugeno (T-S) fuzzy model. Firstly, the correlation analysis is used to filter redundant information. Furthermore, a T-S fuzzy model, which integrates fuzzy c-means (FCM) for the fuzzy division of input variables and DBN for fuzzy subsets forecasting, is developed. Finally, the proposed method is compared to a benchmark DBN method and the T-S fuzzy model in case studies. The numerical results show the feasibility and flexibility of the proposed ultra-short-term PV power forecasting approach.

In recent decades, research utilizing numerical schemes dealing with fluid and nanoparticle interaction has been relatively intensive. It is known that CuO nanofluid with a volume fraction of 0.1 and a special thermal boundary condition with heat supplied to part of the wall increases the average Nusselt number for different aspect ratios ranges and for high Rayleigh numbers. Due to its simplicity, stability, accuracy, efficiency, and ease of parallelization, we use the thermal single relaxation time Bhatnagar-Gross-Krook (SRT BGK) mesoscopic approach D2Q9 scheme lattice Boltzmann method in order to solve the coupled Navier−Stokes equations. Convection of CuO nanofluid in a square enclosure with a moderate Rayleigh number of 105 and with new boundary conditions is highlighted. After a successful validation with a simple partial Dirichlet boundary condition, this paper extends the study to deal with linear and sinusoidal thermal boundary conditions applied to part of the wall.

The trend to reduce CO2 emissions in cooling processes has made it possible to increase the alternatives for integrating solar energy with thermal equipment whose viability depends on its adaptation to polygeneration schemes. Despite the enormous potential offered by the industry for cooling and heating processes, solar cooling technologies (SCT) have been explored in a limited way in the industrial sector. This work discusses the potential applications of industrial SCTs and classifies hybrid polygeneration schemes based on supplying cold, heat, electricity, and desalination of water; summarizes the leading SCTs, and details the main indicators of polygeneration configurations in terms of reductions on primary energy consumption and payback times. To achieve an energy transition in refrigeration processes, the scenarios with the most significant potential are: the food manufacturing industry (water immersion and crystallization processes), the beverage industry (fermentation and stora... [more]

Domestic hot water (DHW) system energy losses are an important part of energy consumption in newly built or in reconstructed apartment buildings. To reach nZEB or low energy building targets (renovation cases) we should take these losses into account during the design phase. These losses depend on room and water temperature, insulation and length of pipes and water circulation strategy. The target of our study is to develop a method which can be used in the early stages of design in primary energy calculations. We are also interested in how much of these losses cannot be utilised as internal heat gain and how much heat loss depends on the level of energy performance of the building. We used detailed DHW system heat loss measurements and simulations from an nZEB apartment building and annual heat loss data from a total of 22 apartment buildings. Our study showed that EN 15316-3 standard equations for pipe length give more than a twice the pipe length in basements. We recommend that for... [more]