This article aims to examine the impact of corporate social responsibility, trust, and sustainable business strategies on the diffusion of innovative solutions in renewable energy sources. In this context, the material from the edition of the reports of the Polish Agency for Enterprise Development on innovation in the renewable energy industry was analyzed. A survey was also conducted among enterprises from the SME sector on the creation of a business model taking into account the diffusion of innovation in the field of renewable energy sources. The SME sector consists of entities that usually do not have an extensive organizational structure or research and development teams. Nevertheless, in the current economic situation, it is required that they are highly competitive, including through implemented innovations. Conscious participation of SME entities in the process of diffusion of innovation may be a solution that brings innovative solutions closer. The author stated that social re... [more]

A new technique, fracturing-and-flowing (frac-n-flow) testing, is introduced for horizontal drilling and multistage hydraulic fracturing (HDMHF) practitioners to check if the next stage would be a brittle fracture using the instantaneous shut-in pressure (ISIP) from the current stage. It was developed to reduce the number of not-flowing clusters in HDMHF treatments due to stress shadows in the development of tight oil reserves in Wolfcamp, Permian Basin, USA, and other similar fields. Preliminary frac-n-flow testing results show that a medium (200−1000 psi) increase in confining pressure under representative field in-situ stresses can transfer Indiana limestone from brittle fracturing to semi-ductile failing. Consequently, folds of increase (FOI) of matrix permeability vary from +13 (i.e., increase by 1300%) to −0.39 (i.e., decrease by 39%). Limestone is one of the major lithological components in Wolfcamp formation. Field ISIP data of two HDMHF wells in Wolfcamp formation show that th... [more]

The process of wind farm operation requires proper logistics services, consisting of the supply of all resources necessary in this process. A critical moment in the operation of wind farms is the implementation of the repowering process, in the form of replacement of the basic elements of wind farms: blades, hub rotors, nacelles or even towers. The replacement of these basic elements of the wind farm relates to the necessity to provide logistics services for heavy and oversized deliveries. Therefore, this article presents a unique analysis of logistics processes related to wind farms. Therefore, the aim of the article is to identify the most energy-saving variant of logistics service of the wind farm repowering process. However, the criterion of selecting the optimal variant is based on the original methodology of energy consumed during logistics services, as opposed to the traditionally used cost-effectiveness criterion. The SolidWorks software with other methods and tools were used f... [more]

The underground coal gasification represents a technology capable of obtaining synthetic coal gas from hard-reached coal deposits and coal beds with tectonic faults. This technology is also less expensive than conventional coal mining. The cavity is formed in the coal seam by converting coal to synthetic gas during the underground coal gasification process. The cavity growth rate and the gasification queue’s moving velocity are affected by controllable variables, i.e., the operation pressure, the gasification agent, and the laboratory coal seam geometry. These variables can be continuously measured by standard measuring devices and techniques as opposed to the underground temperature. This paper researches the possibility of the regression models utilization for temperature data prediction for this reason. Several regression models were proposed that were differed in their structures, i.e., the number and type of selected controllable variables as independent variables. The goal was to... [more]

This review summarizes the current status, operating principles, and recent advances in high-temperature polymer electrolyte membranes (HT-PEMs), with a particular focus on the recent developments, technical challenges, and commercial prospects of the HT-PEM fuel cells. A detailed review of the most recent research activities has been covered by this work, with a major focus on the state-of-the-art concepts describing the proton conductivity and degradation mechanisms of HT-PEMs. In addition, the fuel cell performance and the lifetime of HT-PEM fuel cells as a function of operating conditions have been discussed. In addition, the review highlights the important outcomes found in the recent literature about the HT-PEM fuel cell. The main objectives of this review paper are as follows: (1) the latest development of the HT-PEMs, primarily based on polybenzimidazole membranes and (2) the latest development of the fuel cell performance and the lifetime of the HT-PEMs.

Electro-mobility (EV) is an emerging transportation method, whose charging infrastructure development concerns a key-factor for its growth. EV charging infrastructure has not grown yet in Greece, regardless of the ambitious national targets that have been grounded for 2030 towards a climate-neutral mobility. This study introduces a multi-criteria decision-making (MCDM) framework for EV charging infrastructure deployment and operation, which respects both the economic and the technical aspects for public charging stations. The analytic hierarchy process (AHP) was followed for the MCDM framework’s definition, which used criteria that were in the corresponding literature and performed with interviews by experts from the EV growing market in Greece. The results show that the installation and operation of public EV charging stations, located in private spaces to ensure their protection against vandalism, within the urban areas is the preferred deployment approach. Moreover, this article tes... [more]

In cryogenic fracturing, a rock surface exposed to cryogenic fluids undergoes a large thermal gradient, and the resultant local tensile stress overcomes rock strength and initiates fractures. This study investigates the development of cracks generated from the cryogenic treatment of a borehole under no external confining stress on specimens. The experiments were performed on transparent PMMA specimens to observe fracture proliferation around boreholes. Liquid nitrogen was flowed through the boreholes to cool the borehole surface. The results show that initial fracture growth is characterized by abrupt starts and stops, and as the fracture propagates outward, the growth appears more continuous. In an early stage, horizontal/radial fractures and vertical fractures are the defining patterns. Horizontal fractures tend to be separated by a specific exclusion distance (i.e., spacing between cracks). While distinct horizontal/vertical fractures and exclusion distance manifest themselves at an... [more]

Lithium-ion battery datasheets, also known as specification sheets, are documents that battery manufacturers provide to define the battery’s function, operational limit, performance, reliability, safety, cautions, prohibitions, and warranty. Product manufacturers and customers rely on the datasheets for battery selection and battery management. However, battery datasheets often have ambiguous and, in many cases, misleading terminology and data. This paper reviews and evaluates the datasheets of 25 different lithium-ion battery types from eleven major battery manufacturers. Issues that customers may face are discussed, and recommendations for developing an informative and valuable datasheet that will help customers procure suitable batteries are presented.

In this paper, we investigate the potentials of distributed generation (DG) in a medium-sized Swiss city. We show the role of private households in the sustainable energy transition process induced by Swiss energy policy. For the analysis, we define six scenarios that enable us to study the potentials and impacts of different combinations of DG technologies in terms of costs, CO2 emissions, and amounts and shares of DG provided by non-industrial end-users (essentially private households and the services sector). Three variants are investigated, one with real electricity costs and CO2 emissions, one with increased electricity costs (e.g., construction of new power plants), and one with increased CO2 emissions (e.g., due to the planned nuclear phase-out in Switzerland). We find that non-industrial entities can play an important role as prosumers. They mitigate the need for centralized generation. Within a scenario where the non-industrial energy end-users install water-water heat pumps a... [more]

Most pyrolysis reactors require small sizes of biomass particles to achieve high-quality products. Moreover, understanding the usefulness of high-pressure systems in pyrolysis is important, given the operational challenges they exhibit specific to various biomass materials. To actualize these aspects, the authors first checked previous reviews involving pyrolysis on different biomass and different conditions/situations with their respective objectives and subsections. From these already existing reviews, the team found that there has not been much emphasis on high-pressure fast pyrolysis and its potential in biomass conversion, showing that it is a novel direction in the pyrolysis technology development. Therefore, this review aims to shed more light on high-pressure fast pyrolysis, drawing from (a) classification of pyrolysis; (b) reactors used in fast pyrolysis; (c) heat transfer in pyrolysis feedstock; (d) fast pyrolysis parameters; (e) properties/yields of fast pyrolysis products;... [more]

In this paper, we conclude that Indonesia has vast potential for generating and balancing solar photovoltaic (PV) energy to meet future energy needs at a competitive cost. We systematically analyse renewable energy potential in Indonesia. Solar PV is identified to be an energy source whose technical, environmental and economic potential far exceeds Indonesia’s present and future energy requirements and is far larger than all other renewable energy resources combined. We estimate that electricity consumption in Indonesia could reach 9000 terawatt-hours per year by 2050, which is 30 times larger than at present. Indonesia has abundant space to deploy enough solar to meet this requirement, including on rooftops, inland reservoirs, mining wasteland, and in combination with agriculture. Importantly, Indonesia has a vast maritime area that almost never experiences strong winds or large waves that could host floating solar capable of generating >200,000 terawatt-hours per year. Indonesia also... [more]

This paper presents the results of an analysis using the direct current internal resistance (DCIR) method on a nickel-cobalt-manganese oxide (NCM)-based battery with a nominal capacity of 55.6 Ah. The accelerated degradation test was performed on V0G, V1G, and V2G patterns, representing existing simple power supply, smart charging control, and bi-directional charge/discharge control, respectively. We assumed V0G, V1G, and V2G patterns and conducted charging and discharging experiments according to the set conditions. According to the pattern repetition, changes in the internal resistance of DCIR and AC-impedance were analyzed and battery deterioration was diagnosed. By comparing DCIR and AC-impedance, we confirmed that the changes in internal resistance has a similar trend. In particular, we propose a new DCIR analysis method in the “stop-operation” part rather than the traditional DCIR method. In the case of traditional DCIR method, time is required for the battery to stabilize. Howev... [more]

The growing interest in processes that involve biomass conversion to renewable energy, such as anaerobic digestion, has stimulated research in this field in order to assess the optimum conditions for biogas production from abundant feedstocks, like agro-industrial wastes. Anaerobic digestion is an attractive process for the decomposition of organic wastes via a complex microbial consortium and subsequent conversion of metabolic intermediates to hydrogen and methane. The present study focused on the exploitation of liquid cow manure (LCM) and cheese whey (CW) as noneasily and easily biodegradable sources, respectively, using continuous stirred-tank reactors for biogas production, and a comparison was presented between single- and two-stage anaerobic digestion systems. No significant differences were found concerning LCM treatment, in a two-stage system compared to a single one, concluding that LCM can be treated by implementing a single-stage process, as a recalcitrant substrate, with t... [more]

Prior to full electric conversion, internal combustion engines will still maintain a paramount position in heavy goods and earth-moving vehicles. The most promising, cleaner alternative to fossil fuels is biodiesel. While it does not require alterations in the engine design, hence no major overhaul of existing infrastructure, biodiesel is more sustainable and clean-burning than petro-diesel. Extensive research has been reported on the effect of biodiesel blends, on the operational characteristics of compression ignition (CI) engines as well as the emissions behaviour of such engines. The performance characteristics of CI engines under transient operational conditions with Biodiesel blends has had limited attention so far from researchers. In the present work, transient performance characteristics of a CI engine has been evaluated for various biodiesel blends and its effects on performance behaviour have been quantified. In addition, emission footprints of CI engines under various trans... [more]

The main purpose of this paper is to present the differences in the volume of energy consumption in transport in the EU (European Union) countries. The specific objectives aim to determine the directions of changes and the degree of concentration in the volume of energy utilized by the transport sector in EU states, showing various models in this area, to establish the association between energy absorption and the parameters of the economy and in the field of transport. All EU countries were selected for research by the use of the purposeful selection method as of 31 December 2018. The analyzed period covered the years 2004−2018. For the examination of data, grading data analysis was used as one of the methods of multivariate data analysis. Descriptive, tabular and graphic methods were used to present the results. Findings reveal that there is a general tendency to reduce total energy consumption in the EU countries. The same is the case of energy in transport. Only in 2016−2018 was th... [more]

Thunderstorm downbursts have been reported to cause damage or failure to wind turbine arrays. We extend a large-eddy simulation model used in previous work to generate downburst-related inflow fields with a view toward defining correlated wind fields that all turbines in an array would experience together during a downburst. We are also interested in establishing what role contrasting atmospheric stability conditions can play on the structural demands on the turbines. This interest is because the evening transition period, when thunderstorms are most common, is also when there is generally acknowledged time-varying stability in the atmospheric boundary layer. Our results reveal that the structure of a downburst’s ring vortices and dissipation of its outflow play important roles in the separate inflow fields for turbines located at different parts of the array; these effects vary with stability. Interacting with the ambient winds, the outflow of a downburst is found to have greater impa... [more]

This paper addresses the challenges the policymakers face concerning the EU decarbonization and total electrification roadmaps towards the Paris Agreement set forth to solve the global warming problem within the framework of a 100% renewable heating and cooling target. A new holistic model was developed based on the Rational Exergy Management Model (REMM). This model optimally solves the energy and exergy conflicts between the benefits of using widely available, low-temperature, low-exergy waste and renewable energy sources, like solar energy, and the inability of existing heating equipment, which requires higher exergy to cope with such low temperatures. In recognition of the challenges of retrofitting existing buildings in the EU stock, most of which are more than fifty years old, this study has developed a multi-pronged solution set. The first prong is the development of heating and cooling equipment with heat pipes that may be customized for supply temperatures as low as 35 °C in h... [more]

The global energy mix is undergoing an accelerating transformation driven by new resources, novel technologies, and climate change-related commitments. Changes in the use and availability of energy resources have affected fossil fuels (coal, oil, and natural gas) trade patterns. Some economies enjoy increasing energy independence, whereas others become more dependent on imports to satisfy their energy needs. Using 2000−2018 United Nations Commodity trade and International Energy Agency energy- and monetary-flow data, we examine the evolution of the international network of energy flows to reveal new patterns and understand their energy security implications. Our work explores how the growth in the U.S. unconventional resources, European Union renewable energy, China’s natural gas consumption, and changes in other country energy flows affect economy positions and trade-network connectivity. Testing the small-world property helps us understand the diffusion of new technologies, including... [more]

Microorganism affinity for surfaces can be controlled by introducing material binding motifs into proteins such as fimbrial tip and outer membrane proteins. Here, controlled surface affinity is used to manipulate and enhance electrical power production in a typical bioelectrochemical system, a microbial fuel cell (MFC). Specifically, gold-binding motifs of various affinity were introduced into two scaffolds in Escherichia coli: eCPX, a modified version of outer membrane protein X (OmpX), and FimH, the tip protein of the fimbriae. The behavior of these strains on gold electrodes was examined in small-scale (240 µL) MFCs and 40 mL U-tube MFCs. A clear correlation between the affinity of a strain for a gold surface and the peak voltage produced during MFC operation is shown in the small-scale MFCs; strains displaying peptides with high affinity for gold generate potentials greater than 80 mV while strains displaying peptides with minimal affinity to gold produce potentials around 30 mV. I... [more]

The development of a suitable public charging system for electric vehicles relies on inputs from many complementary organizations that need to synchronize interdependencies across different activities, organizations, and industries. Research on temporal fit has focused on synchronizing activities within or external to the organization, rather than exploring synchronization across multiple organizations with highly interdependent yet colliding temporal structures and multiple time-givers. Drawing on a case study of a collaborative effort to create a national charging infrastructure for electric vehicles, we theorize the interplay between various highly interdependent actors. The resulting theory posits that actors combine and shift between different innovation practices to organize time and explains how multiple, yet interdependent actors engaging in temporal work attempt to accomplish temporal fit. Three entrainment dynamics are identified: (1) temporal tug-of-war through ecosystem con... [more]

The paper is devoted to the analysis of the operating cycle of a high-pressure injection pump used in common rail systems. The investigation is based on experimental activities, and it is carried out in a novel pump set-up that allows measurements of the instantaneous pressure in the piston working chamber. A single plunger pump has been equipped with a piezo-resistive pressure transducer which allows for the measurement of the pressure signal during pump operation on a test rig. The paper describes the experimental set-up, the modified injection pump equipped with the pressure transducer, and the experimental tests carried out. Main results obtained using a standard commercial diesel fuel are discussed at first; secondly, the focus moves on to the use of an alternative fuel (biodiesel) whose features in terms of bulk modulus, viscosity, and density significantly differ from the reference fuel. Based on the characteristics of the pump operating cycle, the fuel suction and delivery proc... [more]

Resource Constraints in Wireless Sensor Networks are a key factor in protocols and application design. Furthermore, energy consumption plays an important role in protocols decisions, such as routing metrics. In Software-Defined Networking (SDN)-based networks, the controller is in charge of all control and routing decisions. Using energy as a metric requires such information from the nodes, which would increase packets traffic, impacting the network performance. Previous works have used energy prediction techniques to reduce the number of packets exchanged in traditional distributed routing protocols. We applied this technique in Software-Defined Wireless Sensor Networks (SDWSN). For this, we implemented an energy prediction algorithm for SDWSN using Markov chain. We evaluated its performance executing the prediction on every node and on the SDN controller. Then, we compared their results with the case without prediction. Our results showed that by running the Markov chain on the contr... [more]

Harnessing wind energy is one of the fastest-growing areas in the energy industry. However, wind power still faces challenges, such as output intermittency due to its nature and output reduction as a result of the wake effect. Moreover, the current practice uses the available renewable energy resources as a fuel-saver simply to reduce fossil-fuel consumption. This is related mainly to the inherently variable and non-dispatchable nature of renewable energy resources, which poses a threat to power system reliability and requires utilities to maintain power-balancing reserves to match the supply from renewable energy resources with the real-time demand levels. Thus, further efforts are needed to mitigate the risk that comes with integrating renewable resources into the electricity grid. Hence, an integrated strategy is being created to determine the optimal size of the hybrid wind-solar photovoltaic power systems (HWSPS) using heuristic optimization with a numerical iterative algorithm su... [more]

This paper introduces a new method of electricity generation using a Wiegand sensor. The Wiegand sensor consists of a magnetic wire and a pickup coil wound around it. This sensor generates a pulse voltage of approximately 5 V and 20 µs width as an induced voltage in the pickup coil. The aim of this study is to generate a DC voltage of 5 V from the sensor, which is expected to be used as a power source in self-powered devices and battery-less modules. We report on the design and verification of a self-oscillating boost converter circuit in this paper. A DC voltage obtained by rectifying and smoothing the pulse voltage generated from the Wiegand sensor was boosted by the circuit. A stable DC output voltage in the order of 5 V for use as a power supply in electronics modules was successfully obtained. A quantitative analysis of the power generated by the Wiegand sensor revealed a suitable voltage-current range for application in self-powered devices and battery-less modules.

With the in-depth penetration of renewable energy in the shipboard power system, the uncertainty of its output power and the variability of sea conditions have brought severe challenges to the control of shipboard integrated power system. In order to provide additional accurate signals to the power control system to eliminate the influence of uncertain factors, this study proposed an adaptive kernel based online sequential extreme learning machine to accurately predict shipboard electric power fluctuation online. Three adaptive factors are introduced, which control the kernel function scale adaptively to ensure the accuracy and speed of the algorithm. The electric power fluctuation data of real-ship under two different sea conditions are used to verify the effectiveness of the algorithm. The simulation results clearly demonstrate that in the case of ship power fluctuation prediction, the proposed method can not only meet the rapidity demand of real-time control system, but also provide... [more]