Process heating is the activity with the most energy consumption in the industrial sector. Solar heating (SH) systems are a promising alternative to provide renewable thermal energy to industrial processes. However, factors such as high investment costs and area limitations in industrial facilities hinder their utilization; therefore, hybrid systems that combine two different solar thermal or photovoltaic technologies where each technology operates under conditions that allow a higher overall performance than conventional configurations have been proposed. In this review, we discuss the limitations of conventional SH systems and the potential of hybrid configurations to overcome them. First, the current literature about conventional and hybrid systems is presented. Then, the application of common performance indicators to evaluate hybrid configurations is analyzed. Finally, the limitation, advantages, and potential applications of conventional and hybrid systems are discussed. This wor... [more]

Storing energy efficiently is one of the main factors of a more sustainable world. The battey management system in energy storage plays an extremely important role in ensuring these systems’ efficiency, safety, and performance. This battery management system is capable of estimating the battery states, which are used to give better efficiency, a long life cycle, and safety. However, these states cannot be measured directly and must be estimated indirectly using battery models. Therefore, accurate battery models are essential for battery management systems implementation. One of these models is the nonlinear grey box model, which is easy to implement in embedded systems and has good accuracy when used with a good parameter identification method. Regarding the parameter identification methods, the nonlinear least square optimization is the most used method. However, to have accurate results, it is necessary to define the system’s initial states, which is not an easy task. This paper pres... [more]

The priority task of the milk processing industry is in reducing the specific energy consumption of milk fat dispersion while simultaneously ensuring a high dispersion of milk emulsion. One of the possible ways to solve this problem is by developing and implementing a little-studied jet milk homogenizer of the slot type. In it, homogenization occurs by implementing the method of the separate feeding of cream, which allows creating the maximum difference between the speeds of skim milk and cream, which is a necessary condition for effective dispersion. Analytical dependences have been found that relate power and specific energy consumption to the performance of a milk homogenizer with the separate cream supply, the diameter of the annular gap, the fat content of normalized milk and cream, and the cream supply speed. The rational value of the fat content of the cream used for homogenization is analytically substantiated; in order to reduce the specific energy consumption of the process,... [more]

In this paper, the window-opening behavior in a three-star green building with an operation mark in Ningbo was investigated. Four single offices facing south were selected, and the measurement lasted 20−40 days in the cooling season. An analysis of the relationship between window use and environmental factors was assessed by monitoring the occupancy state, the window action and window state, the time, and the temperature and humidity. A statistical analysis method was conducted to reveal the similarities and differences in window use among different occupants. The main findings were as follows: The window adjustment behaviors of different people vary significantly. In terms of adjustment time, there are two modes of behaviors. In addition, the occupancy state had a great impact on window action. Moreover, some people prefer to open the windows in the morning and close the windows at departure time, However, some of them prefer to open the windows at departure time and close the windows... [more]

One of the important factors influencing the thermal performance of buildings is the leakage of the envelope. When it comes to Montenegro, although there is a formal airtightness requirement, air permeability tests are not mandatory and therefore there is a lack of data in this regard. This paper reports the results of fan pressurization tests on a single apartment in a multi-family residential building before and after replacing the windows. The replacement of old wooden windows with new UPVC ones, provided that the installation is carefully supervised, proved to be an effective air tightening measure, as it resulted in a reduction of air change rate at the reference building pressure from 6.25 h−1 to 0.77 h−1, or by nearly 90%. The energy impact of air leakage was evaluated using the national software for calculating the energy performance of buildings based on the DIN V 18599 methodology. Calculations showed that by reducing infiltration, significant energy savings for heating can b... [more]

The overall efficiency and energy consumption problem in hydraulic power pack units with and without an additional pre-charging system was analyzed in this paper. A theoretical mathematical model was developed for calculating energy losses in both pump unit structures. To verify the theoretical relationships, a laboratory test stand was built, upon which the results of calculating the overall efficiency were compared with the results of the laboratory tests. Universal diagrams of the overall efficiency dependence as a function of pressure load and geometric adjustment of the main pump’s working volume were created for the case of a particular hydraulic pump unit without and with a pre-charging system. Based on this, discussions were carried out on whether and the way in which the additionally pre-charging system affects the parameters of the overall efficiency characteristics of the researched pump unit. Additionally, the dependence of the optimal pressure load and the maximum overall... [more]

Renewable Energy technologies are becoming suitable options for fast and reliable universal electricity access for all. Solar photovoltaic, being one of the RE technologies, produces variable output power (due to variations in solar radiation, cell, and ambient temperatures), and the modules used have low conversion efficiency. Therefore, maximum power point trackers are needed to harvest more power from the sun and to improve the efficiency of photovoltaic systems. This paper reviews the methods used for maximum power point tracking in photovoltaic systems. These methods have been classified into conventional, intelligent, optimization, and hybrid techniques. A comparison has also been made of the different methods based on criteria such as tracking speed, efficiency, cost, stability, and complexity of implementation. From the literature, it is clear that hybrid techniques are highly efficient compared to conventional methods but are more complex in design and more expensive than the... [more]

In this paper we report about the design and validation of a 1.2 m wind turbine rotor with fixed blade pitch. The wind turbine is a scaled version of the DTU 10 MW. Integrated design of dimensional scaling laws, blade aerodynamics, and turbine control is carried out to reproduce blade loading and interaction with atmospheric boundary layer of the reference turbine, despite challenges posed by the great reduction in chord-based Reynolds number. The rotor is verified with numerical simulations in OpenFAST and wind tunnel testing. The servo-aerodynamic design approach proposed in this article is shown to be successful for small-scale wind turbine models for use in experiments about wakes and floating wind.

In this study, a three-dimensional transient simulation model of a liquid cooling thermal management system with flow distributors and spiral channel cooling plates for pouch lithium-ion batteries has been developed. The cooling plates play the role of uniforming temperature distribution and reducing the maximum temperature within each battery, while the flow distributors have the function of reducing the temperature difference between batteries in the battery module. The accuracy of the thermophysical properties and heat generation rate of the battery was verified experimentally. The optimal structure and cooling strategy of the system was determined by single factor analysis as well as orthogonal test and matrix analysis methods. The optimal solution resulted in a maximum battery module temperature of 34.65 °C, a maximum temperature difference of 3.95 °C, and a channel pressure drop of 8.82 Pa. Using the world-harmonized light-duty vehicles test cycle (WLTC) conditions for a battery... [more]

This paper discusses how the incorporation of high-resolution ground coverage dataset ESA WorldCover into a wind flow field and wake simulation calculation, as well as the use of the coupled wake model for wind farm output simulation, can improve the accuracy of wind resource assessment using engineering examples. In the actual case of grid-connected wind farms in central China, SCADA wind speed data is reconstructed to the free flow wind speed in front of the wind turbine impeller using the transfer function of the nacelle, and the wind farm is modeled using OpenWind software, simulating the wind speed at the height of each wind turbine hub and each wind turbine output. The results show that when other initial data are consistent, using ESA’s high-precision land cover dataset WorldCover 10 m to make roughness lengths which improves the wind farm output simulation accuracy by 8.91%, showing that it is worth trying to apply WorldCover 10 m to the wind farm simulation design. At the same... [more]

Photovoltaic (PV) systems have been growing in popularity as an energy conservation and carbon reduction approach. Generally, battery storage is integrated with a PV system to solve the intermittent and fluctuant problems of solar resources, enhancing the relative independence of the PV−battery (PVB) system. In consideration of the economic benefits and system efficiency, it is necessary to investigate battery capacity allocation methods. A battery capacity configuration method was established in this study to increase the self-sufficiency rate (SSR) and self-consumption rate (SCR) of the system for a building complex by exploiting the battery resources. The PVB system designed for the building complex is divided into two categories: distributed and centralized storage. The SSR and SCR significantly increase with the increasing battery capacity for both schemes. The SCR of centralized storage is always higher than that of distributed storage, considering different battery and PV capaci... [more]

Renewable energy technologies can help us combat climate change and hydrokinetic energy conversion systems could play a major role. The simplicity of hydrokinetic devices helps us to exploit renewable sources, especially in remote locations, which is not possible with conventional methods. A new type of hydrokinetic device called the Energy Conveyor Belt was designed, which works on the concept of conveyor belt technology. Numerical simulations are performed on the design of the Energy Conveyor Belt with Ansys FLUENT to optimize its performance. Some of the optimized models produced a maximum power slightly above 1 kW. The numerical results are then compared to the experimental results of other hydrokinetic turbines. The compactness and flexibility of the design give the Energy Conveyor Belt an advantage over other hydrokinetic devices in regions with fluctuating water levels. Further research has to be undertaken into cascading systems to increase the overall power generated by the sy... [more]

Car-sharing services are developing at an ever-increasing pace. Taking into account the reduction of carbon dioxide emissions and pursuit of the sustainable development of transport, implementing electric cars in car-sharing fleets is being proposed. On the one hand, these types of vehicles are referred to as emission-free, but on the other hand, their environmental friendliness is questionable due to the emission of carbon dioxide during the production of energy to power them. Although many scientific papers are devoted to the issue of reducing emissions through car sharing, there is a research gap concerning the real production of carbon dioxide by car-sharing vehicles during car-sharing trips. To fill this research gap, the objective of the article was to analyze the actual level of carbon dioxide emissions from combustion and electric vehicles from car-sharing systems produced when renting rides. The test results showed that the electric car turned out to be significantly less emit... [more]

In this paper, a two-input, single-output (TISO) DC-DC converter for electric vehicle charging applications with solar photovoltaic (PV) as one of the sources is discussed. A novel, simple, and effective control strategy with maximum power point tracking (MPPT) to maximize power from PV while maintaining a constant bus voltage is proposed. A 100 V, 100 W TISO DC-DC converter is designed and comprehensive simulations are conducted under different conditions. The system characteristics are validated by comparing the results with a conventional P&O algorithm and multiple step size P&O algorithm. The proposed control strategy can precisely generate control signals to track MPPT while maintaining the bus voltage by controlling the output of a fixed DC source according to the changes in PV generation. The overall efficiency of the proposed approach is 98.67%, and the average output voltage is 99.09 V under selected conditions. The overall average output voltage ripple is 0.22% with the propo... [more]

Landfill gas recovery and utilisation is a solution which reduces the adverse environmental impact of the landfill. Combined heat and power (CHP) generation improves the energy balance of the facility and enables the optimal management of energy generated from a renewable source. This article aims to analyse the operation of the CHP unit in two aspects, that is, in terms of energy generation efficiency and operational availability. Energy ratios were calculated and the analysis was based on the Weibull distribution in order to assess the CHP unit’s operational reliability to minimise costs and maximise energy production. The results of the investigations and analyses demonstrated an increase of the gas yield by 29.5%, an increase of energy production by approx. 42%, and the reduction of downtime by 28.2% from 2018 to 2022. Studies related to the efficiency and reliability of operation of the cogeneration unit showed an increase in all the main parameters analysed, which resulted in gre... [more]

The integration of plug-in electric vehicles (PEVs) in residential distribution networks demands a significant amount of electrical load where random and uncoordinated charging affects the quality and performance of the distribution network. Random and uncoordinated charging may increase the peak demand and can increase stress on critical network assets such as line, transformer, and switching devices. Moreover, the charging of PEVs in a low network reduces the voltage of the system below the lower limit. On the other hand, using PEVs as storage in the V2G mode can improve the network condition. Therefore, it is critical to properly manage the charging and discharging operation of PEVs. This paper proposes a multi-objective-based charging and discharging coordination of PEVs with the operation of the capacitor and on-load tap changer (OLTC). With the proposed strategy, the distribution network is operated safely, and charging is ensured for all PEVs connected to the network. The main c... [more]

Reservoir characteristics and the occurrence mechanism of shale gas outside of the Sichuan Basin are the research hotspots of normally pressured shales in China. Taking shales on the Anchang syncline from the periphery of the Sichuan Basin as an example, X-ray diffraction, organic geochemistry, and rock physical experiments were carried out to analyze the reservoir characteristics and their main geological controls on the normally pressured shales. The mineralogical results show that the studied shales from the Anchang syncline are mainly siliceous shales with a high quartz content (average of 57%). The quartz content of these normally pressured shales is of biological origin, as shown by the positive correlation between the quartz and organic carbon (TOC) contents. The average porosity of the studied shales is about 2.9%, which is lower than shales inside the Sichuan Basin. Organic matter pores are likely the primary storage space of the normally pressured shale gas, as shown by the p... [more]

Since the structure of horizontal gas wells is more intricate than that of vertical wells, there is a lack of consistency in the form of liquid-carrying in different portions. Applying the commonly utilized liquid-carrying hypothesis of vertical gas wells into horizontal gas wells is therefore challenging. The maximum liquid volume that the gas flow could raise, the gas flow rate, and the maximum amount of energy that could be produced from a specific amount of gas flow should all be considered when determining the liquid volume that the gas flow could lift. This study is the first to integrate theoretical analysis with laboratory testing to analyze the gas−liquid flow law of drainage stability at varied tubing depths. The impact of gas drainage stability is then verified through the laboratory experiments. The novel model of various tubing depths, which is based on the energy of inflow and outflow from the horizontal well, is cleverly built. According to the study, the fluctuation is... [more]

The accumulation of energy from non-programmable renewable sources is a crucial aspect for the energy transition. Using surplus electricity from renewable energy sources, power-to-gas plants allow to produce a substitute natural gas (SNG) that can be injected in the existing infrastructure for large-scale and long-term energy storage, contributing to gas grid decarbonisation. The plant layout, the method used for carbon dioxide capture and the possible cogeneration of electricity can increase the efficiency and convenience of SNG synthesis plants. In this work, a system for the simultaneous production of SNG and electricity starting from biomass and fluctuating electricity from renewables is proposed, using a plant based on the Allam thermodynamic cycle as the power unit. The Allam power cycle uses supercritical CO2 as evolving fluid and is based on the oxycombustion of gaseous fuels, thus greatly simplifying CO2 capture. In the proposed system, oxycombustion is performed using biomass... [more]

The large and growing volume of tire waste and sewage sludge requires disposal, for which thermochemical processes such as gasification can be used. Co-gasification of these two waste products allows the tire char to be used as a charge stabilizer and the sewage sludge to improve reactivity and efficiency. The purpose of this study was to evaluate the effect of the composition of a waste tire char and sewage sludge fuel blend on the gasification process, using steam as the gasification agent. Tests were carried out for tire char, municipal sewage sludge, and blends of the two in ratios of 90:10 and 67:33. An analysis of the materials used was carried out (ultimate and proximate analysis as well as ash composition), and isothermal measurements of steam gasification were taken using the thermal volumetric method for temperatures of 800, 850, and 900 °C at an elevated pressure of 1 MPa. On the basis of the results, the formation curves of the main gasification products (H2, CO, CO2, and C... [more]

The present article focuses on the efficient deployment of dual locomotives in regional rail freight transport considering the quantification of traction energy and energy savings. In the first part of the article, a categorization of dual locomotives, according to their power output in electric and alternative traction (and ratio of both power outputs) is proposed. The potential of deployment of chosen dual locomotives in Central European conditions (a sub-network of Czech railway network around mainlines electrified with AC) is verified by calculation of traction energy consumption of the model train (with two examples of dual locomotives). In addition to non-stop running through the entire line, traction energy consumption of stop (and following acceleration) in each intermediate station is calculated, for a particular direction. Then, appropriate freight train paths for passing passenger trains and saving of traction energy are proposed. The results are supplemented by sensitivity... [more]

Research on batteries’ State of Charge (SOC) estimation for equivalent circuit models based on the Kalman Filter (KF) framework and machine learning algorithms remains relatively limited. Most studies are focused on a few machine learning algorithms and do not present comprehensive analysis and comparison. Furthermore, most of them focus on obtaining the state space parameters of the Kalman filter frame algorithm models using machine learning algorithms and then substituting the state space parameters into the Kalman filter frame algorithm to estimate the SOC. Such algorithms are highly coupled, and present high complexity and low practicability. This study aims to integrate machine learning with the Kalman filter frame algorithm, and to estimate the final SOC by using different combinations of the input, output, and intermediate variable values of five Kalman filter frame algorithms as the input of the machine learning algorithms of six main streams. These are: linear regression, supp... [more]

Recently, controlling a wind energy conversion system (WECS) under fluctuating wind speed and enhancing the quality of power delivered to the grid has been a demanding challenge for many researchers. This paper provides a comprehensive review of synchronous generator-based WECSs. This paper will investigate the growth of wind energy in Egypt and throughout the world, as well as the technological and financial significance of wind energy. The block diagram of a typical grid-connected WECS, power control techniques, characteristic power curve-based maximum power point tracking (MPPT), and MPPT techniques are also presented in this study. Moreover, this study compares different power converter topologies for grid-connected and independent WECSs that use a permanent magnet synchronous generator (PMSG).

We analyze crude oil’s dependence and the risk spillover effect on the Chinese stock market and the gold market. We compare both static and dynamic copula functions and calculate the average upward and downward spillover effect using the time-varying Copula model and the conditional value-at-risk approach. By utilizing daily data on crude oil prices, China’s stock market, and the gold market, we observe an asymmetric spillover effect: the downside spillover effects from crude oil prices on the Chinese stock market and gold market are larger than the upside spillover effect. We then identify changes in the structure of the sample periods and calculate the dynamic conditional correlation between them. In addition, we explore the optimal weight and hedge ratios in diversified portfolios to mitigate potential risks. Our results suggest that investors and portfolio managers should frequently adjust their portfolio strategies, particularly during extreme events like COVID-19, when financial... [more]

Electric vehicles could be a significant aid in lowering greenhouse gas emissions. Even though extensive study has been done on the features and traits of electric vehicles and the nature of their charging infrastructure, network modeling for electric vehicle manufacturing has been limited and unchanging. The necessity of wireless electric vehicle charging, based on magnetic resonance coupling, drove the primary aims for this review work. Herein, we examined the basic theoretical framework for wireless power transmission systems for EV charging and performed a software-in-the-loop analysis, in addition to carrying out a performance analysis of an EV charging system based on magnetic resonance. This study also covered power pad designs and created workable remedies for the following issues: (i) how power pad positioning affected the function of wireless charging systems and (ii) how to develop strategies to keep power efficiency at its highest level. Moreover, safety features of wireles... [more]