Light-emitting diode (LED) road lighting has been widely implemented in recent years, but few studies have evaluated its performance after installation. This study investigated whether LED road lighting complies with minimum regulations in terms of traffic safety and whether improvements for energy efficiency are possible. Average road surface luminance (L), overall luminance uniformity (Uo), longitudinal luminance uniformity (UI), power density (PD) and normalised power density (PN) were evaluated for 14 roads (seven designed for vehicular traffic and seven for pedestrians and bicycles). Energy savings were calculated as the percentage reduction to the minimum level of the existing lighting class or a lower lighting class and by applying a dimming schedule. The results showed that LED road lighting for vehicular traffic roads generally fulfilled the requirements, whereas that for pedestrian and bicycle roads generally corresponded to the lowest lighting class for L, and often did not... [more]

The suitability of turbine configurations to different wind resources has been traditionally restricted to considering turbines operating as standalone entities. In this paper, a framework is thus developed to investigate turbine suitability in terms of the minimum cost of energy offered when operating as a group of optimally-micro-sited turbines. The four major steps include: (i) characterizing the geographical variation of wind regimes in the onshore U.S. market; (ii) determining the best performing turbines for different wind regimes through wind farm layout optimization; (iii) developing a metric to quantify the expected market suitability of available turbine configurations; and (iv) exploring the best tradeoffs between the cost and capacity factor yielded by these turbines. One hundred thirty one types of commercial turbines offered by major global manufacturers in 2012 are considered for selection. It is found that, in general, higher rated power turbines with medium tower heigh... [more]

The main function of an airport is to provide access to air transport both for passengers and cargo. The number of air operations over the past 20 years has increased rapidly, and this has led to a rise in the energy needs of airports to satisfy this demand. As a consequence, the cost of energy supply for airport managers has escalated. At the same time, global energy consumption has soared due to the needs of emerging countries like China and India, with the consequent environmental impact. This complex scenario of environmental and economic factors has made airport managers become aware of the need to reduce energy consumption as well as a more efficient use of it. The aim of this article is to analyze the main behaviors and energy trends at airports in more recent research, starting with the description of the main energy sources and consumers, the application of energy conservation and energy efficiency measures, the establishment of energy indicators and benchmarking between airpo... [more]

Recently, China has brought out several air-pollution control policies, which indicate the prominent position that PV power hold in improving atmosphere environment. Under this policy environment, the development of China’s PV power will be greatly affected. Firstly, after analyzing the influencing path of air-pollution control policies on PV power, this paper built a system dynamics model, which can be used as a platform for predicting China’s PV power development in every policy scenario during 2015⁻2025. Secondly, different model parameters are put into the SD model to simulate three scenarios of air-pollution control policies. Comparisons between the simulated results of different policy scenarios measure the air-pollution control policy’s impact on China’s PV power in the aspect of generation, installed capacity, power curtailment and so on. This paper points out the long-term development pattern of China’s PV power under latest incentive policies, and provides reference for the p... [more]

As the result of climate change and deteriorating global environmental quality, nations are under pressure to reduce their emissions of greenhouse gases per unit of GDP. China has announced that it is aiming not only to reduce carbon emission per unit of GDP, but also to consume increased amounts of non-fossil energy. The carbon emission allowance is a new type of financial asset in each Chinese province and city that also affects individual firms. This paper attempts to examine the allocative efficiency of carbon emission reduction and non-fossil energy consumption by employing a zero sum gains data envelopment analysis (ZSG-DEA) model, given the premise of fixed CO₂ emissions as well as non-fossil energy consumption. In making its forecasts, the paper optimizes allocative efficiency in 2020 using 2010 economic and carbon emission data from 30 provinces and cities across China as its baseline. An efficient allocation scheme is achieved for all the provinces and cities using the ZSG-DE... [more]

This paper establishes a general methodology to calculate the life-cycle cost of floating offshore renewable energy devices, applying it to wave energy and wind energy devices. It is accounts for the contributions of the six main phases of their life-cycle: concept definition, design and development, manufacturing, installation, exploitation and dismantling, the costs of which have been defined. Moreover, the energy produced is also taken into account to calculate the Levelized Cost of Energy of a floating offshore renewable energy farm. The methodology proposed has been applied to two renewable energy devices: a floating offshore wave energy device and a floating offshore wind energy device. Two locations have been considered: Aguçadoura and São Pedro de Moel, both in Portugal. Results indicate that the most important cost in terms of the life-cycle of a floating offshore renewable energy farm is the exploitation cost, followed by the manufacturing and the installation cost. In additi... [more]

This paper discusses energy conservation and emissions reduction (ECER) in China’s power sector. To better understand China’s successes and failures on energy conservation in the electricity industry, first it is important to know the status of China’s power sector, and the key energy conservation actions, as well as the achievements in the past years. Second, two ECER scenarios are constructed to probe the 2020 energy conservation potential. Results show that the potential is estimated to be more than 240 million tons of coal equivalent (Mtce). Third, the improvement of coal power operations, structures and technologies, and ambitious deployment of energy conservation measures are proposed to fully explore the potential of China’s power industry. Fourth, great challenges for China’s ECER and some suggested policies are summed up. The lessons learnt from China will provide a valuable reference and useful inputs for other emerging economies.

Ecosystem services are tightly coupled with availability of solar energy and its partition into energy fluxes, and biomass accumulation, which represents the energy flux in ecosystems, is a key aspect of ecosystem services. This study analyzed the effects of climate change and land use and land cover change (LUCC) on the biomass accumulation change in the Lower Heihe River Basin during 2001⁻2010. Biomass accumulation was represented with net primary productivity (NPP), which was estimated with the C-Fix model, and scenario analysis was carried out to investigate effects of climate change and LUCC on biomass accumulation change in a spatially explicit way. Results suggested climate change had an overall positive effect on biomass accumulation, mainly owning to changes in CO₂ concentration and temperature. LUCC accounted for 70.61% of biomass accumulation change, but primarily owning to fractional vegetation change (FVCC) rather than land conversion, and there is a negative interactive e... [more]

The reports presented by consulting firms show that annual energy costs generated by 340 million streetlights are expected to reach $23.9 to $42.5 billion by 2025. Those numbers reveal a motivation behind the research aiming at optimizing outdoor lighting energy efficiency. They show that even a small unit improvement can yield large benefits due to the effect of scale. The development of solid state lighting solutions enables highly effective modernization of street lighting installations. It allows obtaining power saving not only by replacing high pressure lamps with LEDs but also by improving a design quality and by introducing a dynamic street lighting control. Both methods, however, are not feasible for industry-standard software tools due to the significant complexity related to a configuration optimization, especially for large-scale projects. The goal of this article is presenting the workaround to the complexity issue, which is based on application of graph methods. They enabl... [more]

The photovoltaic market has recently experienced an enormous expansion, mainly due to the generous Feed-in-Tariffs (FiTs) adopted by many countries. However, in the recent years FiTs have been considerably reduced or even disappeared as their role in the PV deployment has ended. One of the alternatives is the Net-Metering (NEM) policy, which has attracted the interest of stakeholders as it provides a basis for the efficient collaboration between generation and the consumption profiles of the consumer. Currently, there is a lack of a universal policy harmonizing the respective legislations of the E.U. member countries. This paper proposes a novel generalized methodology for the techno-economic assessment of different NEM policies in terms of profitability for the prosumer. The methodology is tested in a formulated case study based on the current NEM policy in Greece. The method proposed uses as inputs the averaged load profiles constructed from real measurements collected from 31 consum... [more]

Understanding the drivers of changes in CO₂ emissions is vital for a range of stakeholders. Hence, this paper explores the main drivers of CO₂ emissions in China using structural decomposition analysis based on constant price and non-comparative input-output tables. The driving forces at both nationwide and industrial levels are divided into nine effects. To investigate the effects from an energy perspective, all nine effects are further decomposed into three kinds of fossil fuels. Our empirical results show that the energy intensity effect can significantly stimulate emission reduction. Though the energy structure effect is weak, the trend of which over time shows that the energy structure is shifting to low carbon. Additionally, among final demand effect, the urban consumption, investment, and export expansion effects predominantly overwhelm other effects and contribute significantly to CO₂ emissions. Although the short term Leontief effects fluctuate greatly, the total Leontief effe... [more]

The electricity consumption and economic growth are highly correlated. The financial crisis in 2008 brought a negative effect on China’s economic growth, which also influenced the electricity consumption. The electricity demand of North China region was also greatly influenced by this financial crisis, the whole social electricity consumption growth rate of which decreased by 14.31% in 2008 compared to that in 2007. In order to analyze the random impulse effect of the financial crisis on the demand of electricity in North China, the monthly data is decomposed into deterministic trend, stochastic impact effect, and periodic trend using the Beveridge-Nelson decomposition method. After comparatively analyzing the impulse effect of the financial crisis on electricity consumption of six provinces in North China, we can draw the conclusions: (1) the electricity consumption of the whole society and the secondary industry are under larger negative impacts, and the random impulse effect of the... [more]

In the effort to combat global warming, renewable energies play a key role. However, most efforts are still focused on the electricity market, so renewables remain underrepresented in the heat market. Biomethane derived from biogas is an intriguing option for using renewable energy to generate heat in residential homes. However, biomethane comes at a significantly higher cost than natural gas, meaning providers have to ask a price premium from consumers. Determining a pricing strategy is thus of crucial importance. Besides cost, providers have to consider consumers’ willingness-to-pay (WTP) for the product. We propose that they could draw on existing research on WTP for green electricity, albeit with some important modifications and scarce research on biomethane. To explore this proposition, we performed a first-of-its-kind analysis of providers’ pricing strategies for biomethane, using both providers’ published data and data provided in response to e-mail queries. Based on the feature... [more]

As drivers of climate action, cities are taking measures to reduce greenhouse gas (GHG) emissions, which if left unabated pose a challenge to meeting long-term climate targets. The economics of climate action needs to be at the forefront of climate dialogue to prioritize investments among competing mitigation measures. A marginal abatement cost (MAC) curve is an effective visualization of climate action that initiates a technical and economic discussion of the cost-effectiveness and abatement potential of such actions among local leaders, policy makers, and climate experts. More commonly demonstrated for countries, MAC curves need to be developed for cities because of their heterogeneity, which vary in their urban activities, energy supply, infrastructure stock, and commuting patterns. The methodology for constructing bottom-up MAC curves for cities is presented for technologies that offer fuel switching and/or energy efficiencies, while considering technology lifetimes, city-specific... [more]

Natural gas hydrate accumulations were confirmed in the Dongsha Area of the South China Sea by the Guangzhou Marine Geological Survey 2 (GMGS2) scientific drilling expedition in 2013. The drilling sites of GMGS2-01, -04, -05, -07, -08, -09, -11, -12, and -16 verified the existence of a hydrate-bearing layer. In this work gas production behavior was evaluated at GMGS2-8 by numerical simulation. The hydrate reservoir in the GMGS2-8 was characterized by dual hydrate layers and a massive hydrate layer. A single vertical well was considered as the well configuration, and depressurization was employed as the dissociation method. Analyses of gas production sensitivity to the production pressure, the thermal conductivity, and the intrinsic permeability were investigated as well. Simulation results indicated that the total gas production from the reference case is approximately 7.3 × 10⁷ ST m³ in 30 years. The average gas production rate in 30 years is 6.7 × 10³ ST m³/day, which is much higher... [more]

Energy-efficient building performance requires sophisticated control systems that are based on realistic occupant behaviour models. To provide robust data for the development of these models, research studies in real-world settings are needed. Yet, such studies are challenging and necessitate careful design in terms of data collection methods and procedures. This paper describes and critiques the design of a mixed methods approach for occupant behaviour research. It reviews the methodology developed for a longitudinal study in a real-world office environment where occupants’ experience with a novel facade technology (electrochromic glazing) was investigated. The methodology integrates objective physical measurements, observational data and self-reported experience data. Using data from one day of the study, this paper illustrates how the different sources can be combined in order to derive an in-depth understanding of the interplay between external daylight conditions, characteristics... [more]

Distributed renewable electricity generators facilitate decarbonising the electricity network, and the smart grid allows higher renewable penetration while improving efficiency. Smart grid scenarios often emphasise localised control, balancing small renewable generation with consumer electricity demand. This research investigates the applicability of proposed decentralised smart grid scenarios utilising a mixed strategy: quantitative analysis of PV adoption data and qualitative policy analysis focusing on policy design, apparent drivers for adoption of the deviation of observed data from the feed-in tariff impact assessment predictions. Analysis reveals that areas of similar installed PV capacity are clustered, indicating a strong dependence on local conditions for PV adoption. Analysing time series of PV adoption finds that it fits neither neo-classical predictions, nor diffusion of innovation S-curves of adoption cleanly. This suggests the influence of external factors on the decisio... [more]

This study describes the performance evaluation of an energy management system, based on electricity consumption, for a Gen 6 Thin Film Transistor Liquid Crystal Display (TFT-LCD) panel plant. Of the various production lines and facility systems, the array system and the compressed dry air consumed the most electricity of 21.8% and 19.8%, respectively, while the public utility used only 1.6% of the total electricity. The baseline electricity consumptions were correlated well (R² ≥ 0.77) to the monthly average wet-bulb temperatures of ambient air and the panel yield rates, which were determined by the product yield over the equipment available time index. After implementing the energy saving projects, the energy conservation performance was determined using a three-parameter change-point regression model incorporated with the panel yield rates. The post-retrofit monthly savings of the total electricity consumption for the panel manufacture were 5.35%⁻10.36%, with the efficiency of the e... [more]

This paper studies the scalability and replicability of smart grid projects. Currently, most smart grid projects are still in the R&D or demonstration phases. The full roll-out of the tested solutions requires a suitable degree of scalability and replicability to prevent project demonstrators from remaining local experimental exercises. Scalability and replicability are the preliminary requisites to perform scaling-up and replication successfully; therefore, scalability and replicability allow for or at least reduce barriers for the growth and reuse of the results of project demonstrators. The paper proposes factors that influence and condition a project’s scalability and replicability. These factors involve technical, economic, regulatory and stakeholder acceptance related aspects, and they describe requirements for scalability and replicability. In order to assess and evaluate the identified scalability and replicability factors, data has been collected from European and national... [more]

In this study, we have modelled the effect of climate change and increased irrigation withdrawals on the available water for hydropower production in two semi-arid river basins, i.e., Kizilirmak (Turkey) and Devoll (Albania), and the role of the reservoirs. The combined effect of climate change and extended irrigation withdrawals will overall lead to reduced runoff in the rivers, according to our simulations. The changes will be most dramatic at Kizilirmak, reducing the water available for hydropower production. The presence of the reservoirs will lead to extended water use/losses due to the provision of regulated flow, enabling larger irrigation withdrawals and increasing the evaporative losses from the reservoir surfaces. Comparing the water consumption losses at Kizilirmak, the irrigation losses are in the range of 2⁻4 times larger than the gross evaporation losses from reservoir surfaces. The reservoirs at Devoll will improve water availability for hydropower production during low... [more]

This study suggests an optimization method for the life cycle cost (LCC) in an economic feasibility analysis when applying energy saving techniques in the early design stage of a building. Literature and previous studies were reviewed to select appropriate optimization and LCC analysis techniques. The energy simulation (Energy Plus) and computational program (MATLAB) were linked to provide an automated optimization process. From the results, it is suggested that this process could outline the cost optimization model with which it is possible to minimize the LCC. To aid in understanding the model, a case study on an industrial building was performed to outline the operations of the cost optimization model including energy savings. An energy optimization model was also presented to illustrate the need for the cost optimization model.

Reduced energy consumption is a key aspect of the green building. Nonetheless, research indicates that there is a performance gap between the predicted and the actual energy performance once buildings are occupied, which implies a cost deviation from the anticipated energy cost performance. However, the cost deviation also might result from lower or higher energy rates than expected. As an appropriate research methodology for existing theory testing, case study research strategy was adopted to empirically examine the earned value management (EVM) approach to measure the actual life cycle cost performance of energy in green buildings. With slight methodological and terminological adaptations, it is found that the EVM approach can be applied to conduct a holistic cost performance measurement of the actual energy consumption in green buildings. The strength of the earned value approach is that it allows for detecting whether the energy cost saving or overrun results from lower or higher e... [more]

This article aims to analyze the results of an economic study carried out to compare the influence of nuclear production capacity in different countries. The analysis is based on LCOEs (levelized cost of electricity) for three back-end strategies: open cycle, closed cycle and advanced closed cycle. The results show that costs are not a relevant criteria in order to select an energy policy for the spent nuclear fuel management.

External air movement within built neighborhoods is highly dependent on the morphological parameters of buildings and surroundings, including building height and street cavity ratios. In this paper, computational fluid dynamics (CFD) methods were applied to calculate surface pressure distributions on building surfaces for three city models and two wind directions. Pressure differences and air change rates were derived in order to predict the heating load required to cover heat losses caused by air infiltration. The models were based on typical urban layouts for three cities, and were designed of approximately equal built volumes and equal air permeability parameters. Simulations of the three analyzed building layouts resulted in up to 41% differences in air change rates and heat losses caused by air infiltration. In the present study, wind direction did not have a significant impact on the relative difference between the models, however sideward wind direction caused higher air change... [more]

Motivating individuals to decrease the environmental impact of their lifestyles could play an important role in reducing energy use and meeting carbon reduction commitments in developed countries. Few approaches which encourage voluntary changes in behaviour result in substantial reductions in energy use, however, particularly over the longer term. An exception to this general trend is small-group interventions which use group participation and which target collections of behaviours including energy use. Through a critical examination of published data this paper considers the energy and carbon emission reductions achieved by such initiatives, the durability of those reductions, and the common elements which may contribute to their success. Participants in small-group interventions reduced their energy use and carbon emissions by approximately 20% within a year. There is also some evidence that these reductions were lasting and that participants continued to make changes to their lifes... [more]