In recent years, with the rapid development of salt cavern gas storage reservoir construction in China, the characteristics of salt rock reservoirs with strong non-homogeneity and many interlayers have brought challenges to the dynamic prediction of water solution cavity construction. Aiming to solve this problem, this paper constructs a three-dimensional non-homogeneous salt cavern reservoir water-soluble cavity building prediction model, which takes into full consideration the non-homogeneity of salt rock reservoirs, interlayers, reservoir temperatures, and water injection process parameters, among other factors. By comparing the calculation results of the software compiled by the model with those of other numerical simulation software, we show that the model can accurately reflect the influence of geological parameters on the cavity morphology under the condition of non-uniform geological parameters, with higher simulation accuracy, and ultimately analyze individual examples. It can... [more]

In deep high-geostress and high-temperature environments, understanding the creep deformation of deep coal is of great significance for effectively controlling coal deformation and improving gas control efficiency. In this paper, the Abel dashpot is defined based on the conformable derivative, and a damage variable is introduced into the conformable derivative order, thereby constructing a damaged Abel dashpot. Combining the Weibull distribution and the Drucker−Prager yield criterion, the thermo-mechanical coupling damage variable is defined, and the coupling damage variable is introduced into the damaged Abel dashpot to establish a thermo-mechanical coupling damaged Abel dashpot. Based on the traditional framework of the Burgers creep model, a three-dimensional fractional creep model of deep coal considering the influence of thermo-mechanical coupling damage is proposed. Experimental data on coal creep under different temperatures and stress conditions are utilized to validate the eff... [more]

The proliferation of Sargassum biomass in various coastal areas has led to environmental and socio-economic problems. However, due to their unique composition, these biomasses offer versatile applications, prompting research into their potential in third-generation biorefineries. In this study, the hydrothermal processing of Sargassum sp. was evaluated under specific conditions at 190 °C/50 min and 150 °C/30 min. The resulting hydrolysates (liquid phase) were used as alternative culture media for cultivation. Nine treatments for the cultivation of Arthrospira platensis were assessed, varying the concentration of hydrothermal hydrolysates (HH) at 190 °C/50 min: T1 (5% v/v), T2 (10% v/v), and T3 (15% v/v). T4 (5% v/v), T5 (10% v/v), and T6 (15% v/v), maintaining the same HH conditions, and with the addition of 0.7 g/L NaNO3; and treatments T7, T8, and T9 had concentrations of 5%, 10%, and 15% of HH, respectively, at 150 °C/30 min with the addition of 0.7 g/L NaNO3, respectively. Each tre... [more]

In response to the issues of poor water flooding efficiency, low oil production rates, and low recovery rates during the high-water-cut period in the low-permeability reservoirs of the Mutou Oilfield, the non-steady-state (NSS) CO2 huff-n-puff oil recovery technology was explored. The NSS CO2 huff-n-puff can improve the development effect of low-permeability reservoirs by replenishing the reservoir energy and significantly increasing the crude oil mobility. Experimental investigations were carried out, including a crude oil and CO2−crude oil swelling experiment, minimum miscibility pressure testing experiment, high-temperature and high-pressure microfluidic experiment, and NSS CO2 huff-n-puff oil recovery on-site pilot test. The experimental results showed that the main mechanisms of NSS CO2 huff-n-puff include dissolution, expansion, viscosity reduction, and swept volume enlargement, which can effectively mobilize the remaining oil from the various pore throats within the reservoir. T... [more]

causes plant diseases and is included in the list of microorganisms subject to export control. Janthinobacterium lividum is capable of synthesizing a pigment with antagonistic potential. The purpose of the study was to evaluate the activity of J. lividum VKM B-3705D and the pigment fraction against C. michiganensis VKM Ac-1402. The results of spectrophotometric and nuclear magnetic resonance analysis showed that the pigment synthesized by the J. lividum VKM B-3705D corresponds to violacein. The J. lividum strain demonstrated potential bacteriostatic activity against C. michiganensis VKM Ac-1402 when both strains were co-cultured. Compared to the control (DMSO), the violacein solution suppressed the specific growth of Clavibacter by 57.7%. The mechanism of suppression of the growth of Clavibacter is discussed. One of the ways to suppress the growth of C. michiganensis may be the inhibition of key enzymes. Violacein inhibited the activity of adenosine triphosphatase (ATPase, EC 3.6.1.3)... [more]

Ultralow-temperature fluids (such as liquid nitrogen, liquid CO2) are novel waterless fracturing technologies designed for dry, water-sensitive reservoirs. Due to their ultralow temperatures, high compression ratios, strong frost heaving forces, and low viscosities, they offer a solution for enhancing the fracturing and permeability of low-permeability reservoirs. In this study, we focus on the combined effects of high-pressure fluid rock breaking, low-temperature freeze-thaw fracturing, and liquid-gas phase transformation expansion on coal-rock in low-permeability reservoirs during liquid nitrogen fracturing (LNF). We systematically analyze the factors that limit the LNF effectiveness, and we discuss the pore fracture process induced by low-temperature fracturing in coal-rock and its impact on the permeability. Based on this analysis, we propose a model and flow for fracturing low-permeability reservoirs with low-temperature fluids. The analysis suggests that the Leidenfrost effect an... [more]

The proper disposal of antibiotic mycelial residue (AMR) is a critical concern due to the spread of antibiotics and environmental pollution. Pyrolysis emerges as a promising technology for AMR treatment. In this study, we investigated the effect of pyrolysis temperature on the thermal decomposition behavior and product characteristics of avermectin (AV) mycelial residues. Various characterization techniques were employed to analyze thoroughly the compositions and yields of the obtained gas, liquid, and biochar products. The results indicated that most of the organic matter such as protein, carbohydrate, and aliphatic compounds in AV mycelial residues decomposed intensely at 322 °C and tended to end at 700 °C, with a total weight loss of up to 72.6 wt%. As the pyrolysis temperature increased, the biochar yield decreased from 32.81 wt% to 26.39 wt% because of the enhanced degradation of volatiles and secondary reactions of the formed aromatic rings. Accordingly, more gas components were... [more]

Laser cladding technology is an effective surface modification technique. In order to prepare coating with excellent properties on the surface of the cold heading die punch, stellite-6 cladding coating with different proportions of Y2O3 was prepared on the surface of W6Mo5Cr4V2 high-speed steel using laser cladding technology in this paper. The effects of different Y2O3 contents on the macroscopic morphology, microstructure, phase analysis, microhardness, and tribological properties of the stellite-6 coatings were investigated. It was determined that the optimal Y2O3 content for the stellite-6 powder was 2%. The results showed that the coating with 2%Y2O3 had the least number of pores and cracks and exhibited good surface flatness when joined. The microstructure became finer and denser, composed mainly of branch, cellular, equiaxed, and columnar grains. The coating consisted mainly of γ-Co, Fe-Cr, and Co3Fe7 strengthening phases, indicating good metallurgical bonding between the coatin... [more]

The unregulated discharge of synthetic dyes from various anthropogenic and industrial activities has resulted in the contamination of different environmental compartments. These dyes can contaminate water bodies, soil, and even the air, resulting in many environmental and health issues. True colors may persist for long periods, thereby affecting the aesthetics and ecology of dye-contaminated areas. Furthermore, they pose potential risks to aquatic life and human health through the ingestion or absorption of dye-contaminated water or food. Acid orange 7 (AO7) is a synthetic azo dye used in the textile, tanning, food, pharmaceutical, paint, electronics, cosmetics, and paper and pulp industries. AO7 can have various human health implications, such as dermatitis, nausea, severe headache, respiratory tract irritation, and bone marrow depletion, due to its high toxicity, mutagenicity, and carcinogenicity. Efforts to regulate and mitigate dye pollution (AO7) are crucial for environmental sust... [more]

TI−6AL−4V alloys are widely used in various fields owing to their excellent corrosion resistance, high-temperature resistance, and low-temperature toughness. Herein, a microgroove fixture was used to simulate the microgrooves in a titanium alloy with different aspect ratios to study the influence of the electrolyte flow rate on the polishing effect. The optimization of the electrochemical polishing parameters was conducted using experiments and simulations. The effects of process parameters, such as the concentration of sodium chloride (NaCl) and zinc chloride (ZnCl2), polishing time, and processing voltage, on the quality of the post-polished surface were studied. Experiments were conducted on microgrooves with different aspect ratios under the optimized polishing process parameters. Changes in the surface elements of the microgrooves after polishing were detected. The experimental results indicated that the optimal electrochemical polishing solution flow rate, NaCl concentration, ZnC... [more]

As a new type of aftertreatment technology, non-thermal plasma (NTP) can effectively decompose the particulate matter (PM) deposited in diesel particulate filters (DPFs). In this paper, a regeneration test of a DPF loaded with carbon black was carried out using an NTP injection system, and the changes of oxidative activity, elemental content, and occurrence state, microstructure and graphitization degree of carbon black were analyzed to reveal the evolution of the physicochemical properties of carbon black at different regeneration stages of the DPF regenerated by NTP. As the regeneration stage of the DPF advanced, Ti, Tmax, and Te of the carbon black at the bottom of the DPF decreased, which were higher than those at the regeneration interface. After the NTP reaction, the proportion of C element decreased to less than 80%, while the proportion of O element increased to more than 20%; C-O was converted to C=O and the relative content of C=O increased. The average microcrystalline lengt... [more]

Polyhydroxyalkanoate (PHA) polymers are environmentally friendly alternatives to conventional plastics. In support of a circular bioeconomy, they can be produced by growing microbial strains in waste materials, including lignocellulosic biomass, such as Canola fines (straw). In this study, PHA and polyhydroxybutyrate (PHB) production by a selection of seven wild-type actinobacterial strains, including three strains of Gordonia species, were assessed. When grown in defined media and hydrolysates of Canola fines, the highest amounts of PHB were produced by Nocardia gamkensis CZH20T (0.0476 mg/mL) and Gordonia lacunae BS2T (0.0479 mg/mL), respectively. Six strains exhibited a substrate preference for cellobiose over glucose, xylose, and arabinose in the hydrolysates. Analysis of Fourier transform infrared spectra indicated that the strains produced co-polymers of short- and medium-chain-length PHAs. None of the core phaABC genes were found on defined operons in the genomes of the top PHB-... [more]

The field of material sciences has evolved vastly in the last two decades, largely due to the discovery of carbon nanomaterials such as graphene and its derivatives. Although they offer positive characteristics, the cost of production and material processing of these carbon nanomaterials has limited their application. However, scientists have started searching for cheaper and more environmentally friendly alternatives. Biochar, a carbonaceous material derived from biowaste, is the most viable alternative, as it offers characteristics on par with traditional carbon nanomaterials. This review will discuss the production of biochar from biomass, methods of production, the effects various conditions have on the production of biochar, biomass selection, current biochar applications, and the potential biochar has to produce hydrogen as an energy carrier.

Food waste (FW), piggery waste (PW), and activated sludge (AS) were investigated as potential organic feeds for bioelectricity generation in laboratory-scale microbial fuel cells (MFCs). The MFCs fed by FW gained the highest maximum power density at 7.25 W/m3, followed by those fed by PW at 3.86 W/m3 and AS at 1.54 W/m3. The tCOD removal in the FW-, PW-, and AS-MFCs reached 76.9%, 63.9%, and 55.22%, respectively, within a 30-day retention time. Food waste, which resulted in the highest power density and tCOD removal, was selected for a series of following tests to investigate the effects of some physicochemical properties of organic feed on the performance of MFCs. The effect of feed particle size was tested with three controlled size ranges (i.e., 3, 1, and <1 mm) in MFCs. A smaller feed particle size provided a higher power density of 7.25 W/m3 and a tCOD removal of 76.9% compared to the MFCs fed with organic waste with a larger particle size. An increment in feed moisture from 70... [more]

Microfluidic chips represent a cutting-edge technology for manipulating fluids within micrometer-scale spaces and are gradually becoming a new favorite platform in life science research. Precise and fast zonal temperature control is essential for accelerating biological experiments. However, current multi-channel temperature controllers typically rely on multiple channel sets to achieve single set-point control, which results in discrepancies between the fluid temperature distribution and sensor temperature due to the distributed temperature field in the fluid channel. To estimate the actual temperature and implement gradient temperature control, this paper introduces an extension of the target tracking (TT) two degrees of freedom (2DOF) state feedback control (SFC) method, followed by a presentation of simulation and experimental results. Through comparisons with an enhanced PID system in both simulation and experimentation, the paper demonstrates an 8.96% reduction in the maximum tem... [more]

The research focuses on optimizing vegetable oil production processes for human consumption, emphasizing green and efficient extraction methods using renewable solvents with minimal toxic residues. Pressurized liquid extraction (PLE), especially with ethanol, is studied for its efficiency and low solvent usage in intermittent processes. By evaluating extraction parameters and kinetics, the study aims to determine optimal conditions for higher extraction rates and yields, providing insights into production costs and other factors. Specifically, the research examines the behavior of extraction kinetics for vegetable oils like rice bran, sunflower seeds, and rolled soybeans. It also seeks to determine mass diffusivity in semi-continuous processes and to model PLE in intermittent processes using Fick’s Law and Mathematica Wolfram Software v11.2. The effective diffusivity (Deff) for rice bran oil in pressurized ethanol varied between 13.09 and 15.70 × 10−12 m2/s, and the Deff value of sunfl... [more]

In response to the trajectory tracking control problem of manipulators under measurement disturbances, a novel multi-input multi-output discrete integral terminal sliding mode control scheme is proposed. Initially, this scheme establishes a dynamic model of a two-joint manipulator based on the Lagrangian dynamics analysis method. Subsequently, a discrete integral terminal sliding mode control law based on the dynamic model of the two joints is designed, incorporating delayed estimation of unknown disturbances and discretization errors in the manipulator system. To enhance the trajectory tracking accuracy of the control scheme and suppress the impact of sliding mode chattering on the manipulator system, an adaptive switching term is introduced into the discrete integral terminal sliding mode control law. The paper derives an adaptive discrete integral terminal sliding mode control scheme and provides stability proof for the proposed approach. Simulation experiments are conducted to comp... [more]

For chemical processes, dynamic optimization is employed for process transition. On the basis of the multilayer control structure, the employment of dynamic optimization is affected by the regulatory control system. To avoid the adjustment of the regulatory control system, set-point optimization is proposed. For comparison, two types of optimization models, namely direct optimization and set-point optimization, are formulated. The superiority of set-point optimization is rigorously proven. By simulating the commercial process of a throughput-fluctuating ethylene column, the integrated absolute error and maximum deviation of product quality are reduced by more than 150% with set-point optimization. The results indicate that the approach to process transition via regulatory controllers not only avoids the insecurity caused by the switching of set-point controllers but also improves the optimization performance. In conclusion, the proposed optimization structure, namely set-point optimiza... [more]

Inspired by the vast potential of microalgae in the bioeconomy and the numerous applications and benefits associated with their cultivation, a multitude of pilot- and industrial-scale microalgae production systems have been developed in recent years. Both open and closed cultivation systems have been successfully utilized, with closed photo-bioreactors (PBRs) emerging as the most versatile option for various applications and products, enabling the implementation of advanced optimization strategies. Therefore, this short review provides a comprehensive overview of the different PBR configurations and their recent applications, primarily in large-scale but also in pilot- and laboratory-scale microalgae cultivation. A detailed discussion of the advantages, limitations, specific applications and recent advancements of each type of PBR is presented to aid researchers, engineers and industry stakeholders in selecting the most suitable PBR design for their specific goals and constraints. More... [more]

Air pollution from combustion processes is harming human health and the environment. To mitigate this, one needs to adopt cleaner energy production methods, in particular, to optimize combustion systems in order to minimize pollutants and increase efficiency. Flue gas analysis and particulate matter (PM) monitoring, starting from the prototype phase, is crucial to minimize and regulate pollutant emissions. This article analyses the emissions of pollutants and particulate matter from a combustion test gasifier working on the Top-Lit Updraft (TLUD) principle in order to optimize functionality and reduce exhaust emissions. Three experiments were performed in which the primary (gasification) air flow rate (GA) was kept constant at 25 L/min, and the secondary (combustion) air flow rate (CA) was adjusted to obtain a CA/GA ratio of 2 (50 L/min), 3 (75 L/min), and 4 (100 L/min) respectively. Based on a multi-criterial analysis, the optimal CA/GA ratio for TLUD combustion is 3, offering a well-... [more]

The automobile industry is recognized as one of the most influential sectors shaping global economies, societies, and individual lifestyles. Therefore, fierce competition among different companies is continuously undergoing, and special attention is focused on innovations to improve competitiveness. In the past several years, additive manufacturing (AM) has emerged as an innovative technology in applications in the automobile industry with significant advantages over traditional techniques. As a result, increasing efforts have been paid to combining AM technology with the development of the automobile industry. Currently, many automobile players are optimizing their industrial layout by incorporating innovative AM techniques, and meanwhile, a lot of research progress has been achieved in order to meet the market demand. This article aims at presenting a timely review to conclude the recent advances in the application of AM techniques in the automobile industry, focusing on the availabl... [more]

Maximizing the yield of bioactive molecules extracted from plant materials requires the investigation of extraction process variables; therefore, in this research, a traditional aqueous solid−liquid extraction method was employed on two distinct grape pomace skin samples. The grape skin pomace represents a potentially valuable source of biologically active compounds, particularly polyphenols. Experiment 1 utilized ground grape pomace skin, whereas experiment 2 utilized grape pomace skin that had been both dried and ground beforehand. Employing a Box−Benkhen experimental design and response surface modeling in the Statistica 14.0 software package, this study evaluated the impact of temperature, extraction time, solid-to-liquid ratio (S/L), and mixing speed on extraction efficiency. The extracted compounds were assessed for both physical properties (conductivity, total dissolved solids, and pH) and chemical properties (total polyphenol content and antioxidant activity using 2,2-Diphenyl-... [more]

Hydraulic fracturing is one of the most effective stimulation methods for unconsolidated sandstone reservoirs. However, the design of hydraulic fracturing must take into account the mechanical and stress properties of different geological formations between layers. In this paper, a three-dimensional coupled fluid-solid model using the finite element method is developed to investigate multiple vertical fractures at different depths along a vertical wellbore under different geological and geomechanical conditions. The finite element model does not require further refinement of any new cracks, requiring much smaller degrees of freedom and higher computational efficiency. In addition, new elements were used to account for local pressure drop due to perforation entry friction along the vertical wellbore. Numerical simulation results indicate that hydraulic fracture connections are observed from adjacent layers. Furthermore, the low stress contrast and high Young’s modulus between the layers... [more]

Renewable sources of energy production are some of the main targets today to protect the environment through reduced fossil fuel consumption and CO2 emissions. Alongside wind, solar, marine, biomass and nuclear sources, hydropower is among the oldest but still not fully explored renewable energy sources. Compared with other sources like wind and solar, hydropower is more stable and consistent, offering increased predictability. Even so, it should be analyzed considering water flow, dams capacity, climate change, irrigation, navigation, and so on. The aim of this study is to propose a forecast model of hydropower production capacity and identify long-term trends. The curve fit forecast parabolic model was applied to 33 European countries for time series data from 1990 to 2021. Space-time cube ArcGIS representation in 2D and 3D offers visualization of the prediction and model confidence rate. The quadratic trajectory fit the raw data for 14 countries, validated by visual check, and in 20... [more]

It is difficult to underestimate the role of electrochemistry in the modern world [...]