We aimed to investigate the corrosion patterns and the main controlling factors of N80 steel and P110 steel tubing under different sections. Conducting weight loss corrosion experiments for 168 h using high-temperature and high-pressure autoclaves to simulate the corrosion behavior of two types of casing materials, N80 steel and P110 steel, in different well sections under specific conditions of CO2 content, chloride ion concentration, temperature, pressure, and sulfate-reducing bacteria population in highly mineralized formation water. X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) were used to analyze the corrosion products, surface morphology, and elemental composition of the two steel pipes. Additionally, 3D microscopy was employed to observe the morphology and measure the dimensions of localized corrosion pits. Under different well sections, the corrosion products formed on N80 steel and P110 steel mainly consist of FeCO... [more]

Within the domain of industrial control systems, safeguarding data integrity stands as a pivotal endeavor, especially in light of the burgeoning menace posed by malicious tampering and potential data loss. Traditional data storage paradigms, tethered to physical hard disks, are fraught with inherent susceptibilities, underscoring the pressing need for the deployment of resilient preservation frameworks. This study delves into the transformative potential offered by distributed ledger technology (DLT), with a specific focus on IOTA, within the expansive landscape of the Internet of Things (IoT). Through a meticulous examination of the intricacies inherent to data transmission protocols, we present a novel paradigm aimed at fortifying data security. Our approach advocates for the strategic placement of IOTA nodes on lower-level devices, thereby streamlining the transmission pathway and curtailing vulnerabilities. This concerted effort ensures the seamless preservation of data confidentia... [more]

The aim of this study is to purify industrial textile effluents by treating two types of commonly encountered dyes: blue maxilon (BM), of cationic nature, and black eriochrome (NE), of anionic nature. We intend to employ an innovative approach based on the adsorption of these dyes onto a novel vegetal biomaterial derived from Aleppo pine fibers (FPAs). A kinetic and thermodynamic study was conducted. The effect of some physicochemical parameters on both dye adsorption and FPAs was also evaluated. The modeling of the adsorption results was performed using Langmuir, Freundlich, Temkin, and Dubinin Radushkevich (D-R) isotherms. The results indicate that the equilibrium time strongly depends on the initial concentration of the two dyes, being 60 min with pseudo-second-order adsorption kinetics for both dyes. Adsorption isotherms under the optimal conditions of adsorbent mass, temperature, medium pH, and dye concentration were used to determine the maximum adsorption efficiency, which was c... [more]

The co-gasification of coal and biomass offers numerous benefits, including improved gasification efficiency, reduced pollution emissions, and the utilization of renewable resources. However, there is a lack of comprehensive research on the synergistic effects of, and influence parameters on, coal−biomass co-gasification. This study employs Aspen Plus simulations to investigate the co-gasification behavior of coal and corn straw, focusing on the synergistic effects and the impact of various operating conditions. A synergistic coefficient is defined to quantify the interactions between the feedstocks. Sensitivity analyses explore the effects of gasification temperature (800−1300 °C), coal rank (lignite, bituminous, anthracite), biomass mass fraction (0−50%), oxygen-to-carbon ratio, and steam-to-carbon ratio on the synergistic coefficients of effective syngas content (CO + H2), specific oxygen consumption, specific fuel consumption, and cold gas efficiency. The results reveal an optimal... [more]

Abnormal conditions greatly reduce the efficiency of hydraulic fracturing of unconventional gas reservoirs. Optimizing the fracturing scheme is crucial to minimize the likelihood of abnormal operational conditions, such as pressure channeling, casing deformation, and proppant plugging. This paper proposes a novel machine learning-based method for optimizing abnormal conditions during hydraulic fracturing of unconventional natural gas reservoirs. Firstly, the main controlling factors of abnormal conditions are selected through a hybrid controlling analysis, upon which a surrogate model is established for predicting the occurrence probability of abnormal conditions, rather than whether abnormal conditions happen or not. Subsequently, a machine learning-based optimization algorithm is developed to minimize the occurrence probability of abnormal conditions, acknowledging their inevitability during the fracturing process. The optimal results demonstrate the proposed method outperforms tradi... [more]

Many studies have used fractal theory to characterize pore structure distribution heterogeneity through mercury intake curves. However, there is relatively little research on the fractal model calculation of mercury removal curves. In this study, a high-pressure mercury intrusion test is used to describe the pore and fracture distribution heterogeneity (PFDH). The fractal physical meaning of the mercury removal curve was determined by calculating the change in the curve’s fractal dimension value. The results are as follows. (1) According to mercury removal efficiency and porosity, samples can be divided into types A (mercury removal efficiency above 35%) and B (mercury removal efficiency below 35%). In general, type A sample belongs to micro-pore-developed types, and type B samples belong to the macro-pore-developed type. (2) The Menger model (M) represents the complexity of a specific surface area, while the Sierpinski model (S) represents the roughness of the pore volume. Among all t... [more]

For over four decades, carbon dioxide (CO2) has been instrumental in enhancing oil extraction through advanced recovery techniques. One such method, water alternating gas (WAG) injection, while effective, grapples with limitations like gas channeling and gravity segregation. To tackle the aforementioned issues, this paper proposes an upgrade coupling method named alkaline-surfactant-polymer alternating gas (ASPAG). ASP flooding and CO2 are injected alternately into the reservoir to enhance the recovery of the WAG process. The uniqueness of this method lies in the fact that polymers could help profile modification, CO2 would miscible mix with oil, and alkaline surfactant would reduce oil−water interfacial tension (IFT). To analyze the feasibility of ASPAG, a couples model considering both gas flooding and ASP flooding processes is established by using the CMG-STARS (Version 2021) to study the performance of ASPAG and compare the recovery among ASPAG, WAG, and ASP flooding. Our research... [more]

Intuitionistic fuzzy sets provide a viable framework for modelling lifetime distribution characteristics, particularly in scenarios with measurement imprecision. This is accomplished by utilizing membership and non-membership degrees to accurately express the complexities of data uncertainty. Nonetheless, the complexities of some cases necessitate a more advanced approach of imprecise data, motivating the use of generalized intuitionistic fuzzy sets (GenIFSs). The use of GenIFSs represents a flexible modeling strategy that is characterized by the careful incorporation of an extra level of hesitancy, which effectively clarifies the underlying ambiguity and uncertainty present in reliability evaluations. The study employs a methodology based on generalized intuitionistic fuzzy distributions to thoroughly examine the uncertainty related to the parameters and reliability characteristics present in the Burr XII distribution. The goal is to provide a more accurate evaluation of reliability m... [more]

The aim of this study was to evaluate the effects of different drying methods on bioactive compounds and to analyze their composition in Verbascum sinaiticum (V. sinaiticum) leaf extracts using UHPLC-ESI-QTOF-MS/MS. V. sinaiticum is traditionally used as an herbal medicine, yet it has undergone limited scientific investigations regarding its secondary metabolites. V. sinaiticum leaves were dried using oven dryers at 50 °C, 60 °C, and 70 °C, as well as a freeze dryer. The leaves were then extracted using 50% and 70% aqueous ethanol and 100% aqueous solutions. The results showed that the highest contents of TPC and TFC were observed when 70% aqueous ethanol was used during freeze drying, reaching 181.73 mg GAE/g dw and 78.57 mg CE/g dw, respectively. The strongest correlations were observed between the TFC and DPPH radical scavenging activity (0.9082), followed by TPC and ABTS assays (0.8933) and TPC and DPPH (0.8272). In the FTIR analysis, freeze drying exhibited a lower intensity of th... [more]

Pepper processing waste has the potential to be used as a substrate in the process of anaerobic digestion, but because of its high polyphenol content, certain limitations are expected. During the determination of the biodegradability of pepper samples, a biogas potential of 687 L/kg DM was observed, as well as a biomethane potential of 401 L/kg DM. While both the testing of biodegradability and the process in the pilot scale progressed, it was observed that total polyphenol content in both cases decreased. Also, as far as individual polyphenols during the process in the pilot scale are concerned, it can be observed that at the end of the process no procyanidin A2, epicatechin, myricetin, and quercetin were detected. The observed concentration of the ferulic acid on the last day of the process was 0.09 µg/g. Finally, it can be concluded that the presence of polyphenols did not significantly affect the biogas potential of pepper waste. Due to its relatively stable biogas production, as f... [more]

The physical properties of shale reservoirs are typically poor, necessitating the use of fracturing technology for effective development. However, the high clay content prevalent in shale formations poses significant challenges for conventional hydraulic fracturing methods. To address this issue, CO2-based fracturing fluid has been proposed as an alternative to mitigate the damage caused by water-based fracturing fluids. In this paper, the applicability of quasi-dry CO2 fracturing in shale reservoirs is examined from three key perspectives: the viscosity of CO2 fracturing fluid, the fracture characteristics induced by the CO2 fracture fluid, and the potential reservoir damage caused by the fracturing fluid. Firstly, the viscosity of CO2 fracturing fluid was determined by a rheological experiment. Rheological tests revealed that the viscosity of CO2 fracturing fluid was significantly influenced by the water−carbon ratio. Specifically, when the water−carbon ratio was 30:70, the maximum v... [more]

Designs for remanufacturing (DfRem) consider the remanufacturability of the product in the early stages of product design, which can greatly increase the reusability of the products. However, product design schemes lack reasonable evaluation indicators for remanufacturability, and the decision-makers of the design scheme have subjective preferences and vague hesitation. These result in inaccurate decision making on DfRem schemes that will affect the successful implementation of product remanufacturing. In order to improve the accuracy of the DfRem scheme decision, a fuzzy decision-making method for green design for remanufacturability is proposed. Firstly, an evaluation indicator system for green design schemes was established that takes into account remanufacturability, reliability, cost, and the environment, and the entropy weighting method is used to quantify and weigh the design scheme evaluation indicators. Then, the hesitation fuzzy set is applied to construct the set of evaluati... [more]

Kuwait stands as one of the hottest locations globally, experiencing scorching temperatures that can soar to 50 °C during the summer months. Conversely, in the winter months of December and January, temperatures may plummet to less than 10 °C. Maintaining a comfortable temperature indoors necessitates a substantial amount of energy, particularly during the scorching summer seasons. In Kuwait, most of the electrical energy required for functions such as air conditioning and lighting is derived from fossil fuel resources, contributing to escalating air pollution and global warming. To reduce dependence on conventional energy sources for heating and cooling, this article presents a case study to explore the potential of using geothermal energy for space heating and cooling in Kuwait. The case study involves utilizing a geothermal heat pump (water-sourced heat pump) in conjunction with a vertical-borehole ground heat exchanger (VBGHE). The mentioned system is deployed to regulate the clima... [more]

Proppant transport and distribution law in hydraulic fractures has important theoretical and field guidance significance for the optimization design of hydraulic fracturing schemes and accurate production prediction. Many studies aim to understand proppant transportation in complex fracture systems. Few studies, however, have addressed the flow path mechanism between the transverse fracture and horizontal well, which is often neglected in practical design. In this paper, a series of mathematical equations, including the rock elastic deformation equation, fracturing fluid continuity equation, fracturing fluid flow equation, and proppant continuity equation for the proppant transport, were established for the transverse fracture of a horizontal well, while the finite element method was used for the solution. Moreover, the two-dimensional radial flow was considered in the proppant transport modeling. The results show that proppant breakage, embedding, and particle migration are harmful to... [more]

Aiming at the high accuracy and high robustness position control of servo pump control in the pitch system of a wind turbine generator, this paper proposes an active disturbance rejection controller (ADRC). The ADRC considers pitch angular velocity and acceleration limits. According to the kinematics principle of the pump-controlled pitch system, the relationship between the pitch angular velocity and acceleration limit and the displacement of the hydraulic cylinder is established. Through the method of theoretical analysis, the nonlinear relationship expression between pitch angle and hydraulic cylinder displacement is obtained, and the linearization of pitch angular velocity control is realized; the formula for b0 (the estimated value of the input gain of the system) of the pump-controlled pitch system is obtained by the method of modeling and analysis, b0 is the key parameter for the design of the ADRC; the stability of the controller parameters is proved through the stability analy... [more]

An ion-exchange procedure of synthetic zeolite ZSM-5 (Si/Al = 15) was used to prepare three cobalt ZSM-5 zeolites (CoM-ZSM5 (M = Zn and Ni)) that were examined for OERs in alkaline media. The structural, morphological, and surface properties of the prepared materials were studied by X-ray powder diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy with energy dispersive spectroscopy, and low-temperature nitrogen adsorption. All three electrocatalysts showed OER activity where CoNi-ZSM5 presented the highest current density (9.5 mA cm−2 at 2 V), the lowest Tafel slope (134 mV dec−1), and the lowest resistances of the charge transfer reaction (31.5 Ω). Overpotential (ηonset) at an onset potential of 410 mV for both CoNi-ZSM5 and Co-ZSM5 and 440 mV for CoZn-ZSM5 electrodes was observed. Co-ZSM5 showed somewhat lower OER catalytic activity than CoNi-ZSM5, while CoZn-ZSM5 demonstrated the lowest OER catalytic activity. The Rct of CoZn-ZSM5 is significantly high... [more]

A sensorless vector active disturbance rejection control (ADRC) method for permanent magnet synchronous motors (PMSM) utilizing a Luenberger observer is presented. This method aims to address the challenges associated with weak active disturbances, substantial steady-state speed amplitude fluctuations, and difficulty in achieving a balance between overshoot and speed control in the sensorless PMSM control system. Mathematical models of the Luenberger observer and the ADRC were analyzed, leading to the proposal of a second-order ADRC control method based on the Luenberger observer. A mathematical model of the permanent PMSM has been introduced. Additionally, the necessary conditions for the convergence of the Luenberger observer were derived and examined. The allowable range of error feedback gain values was determined, and rotor position data were acquired using a phase-locked loop. The principle of the ADRC was analyzed, and the ADRC simulation results, along with the PI simulation re... [more]

In this study, Chlorella pyrenoidosa was cultured with different concentrations of Cr(III) and Cr(VI), and the changes in biomass, lipid content, protein content and total sugar content of Chlorella pyrenoidosa under different culture conditions were detected. The effects of Cr(III) and Cr(VI) on the intracellular antioxidant system and related key enzymes of lipid synthesis were analyzed. The results showed that appropriate Cr(III) and Cr(VI) concentrations could make Chlorella pyrenoidosa regulate the contents of SOD, POD, ASA, CAT and GSH in cells, improve the enzyme activity of ACC and promote lipid synthesis. The aim was to investigate the mechanism of lipid synthesis by analyzing the distribution of Cr(III) and Cr(VI) in algal cells. The lipid content of Chlorella pyrenoidosa reached its highest level at 50.43 wt% and 38.00 wt% when both Cr(III) and Cr(VI) concentrations in the culture environment were 0.5 mg/L. These values were 1.37 and 1.03 times higher than the control group,... [more]

Due to the impact of global warming and climate change, more and more people are starting to have a clearer understanding and vigilance about greenhouse gases. To prevent further deterioration of the global environment, this study examines the coefficients of performance of 21 currently available refrigerants with very low global-warming potential and zero ozone-depleting potential under evaporation temperatures of 10, −20, −40, and −60 °C and condensation temperatures of 30, 40, and 50 °C, respectively. It is found that the use of pure refrigerant in a two-stage refrigeration system to replace the single-stage refrigeration system, in addition to mixing it into an appropriate mixture, can effectively improve the performance coefficient of the refrigeration system. For single-stage vapor compression refrigeration systems, R1234ze(Z), R601, and R1233zd(E) have the best refrigeration performances among the environmentally friendly refrigerants studied, while R441A performs the worst for... [more]

The bulk density of the particles, which is directly related to transportation and storage costs, is an important basic characteristic of products as well as an important parameter in many processing systems. This work quantified the relationship between the tapped bulk density of raspberry ketone with different degrees of agglomeration and morphological metrics (particle shape descriptors and roughness descriptors) and size metrics (size descriptors) and developed an artificial neural network (ANN) prediction model for the tapped bulk density of raspberry ketone. Samples prepared under different conditions were sieved and remixed, the tapped bulk density of the particles was then measured, and the descriptor features of the particles were obtained by combining them with image processing. The dimensions of the variables were decreased by principal component analysis and variance processing. To overcome the hyperparameter estimation of the heuristic-based artificial neural networks, the... [more]

The propagation of hydraulic fractures is highly influenced by the geological structure of the reservoir in unconventional reservoirs, such as natural fractures. In this paper, a new fluid−solid coupling dynamic model was built which presents the failure mechanism of hydraulic fracture with pre-existing simple and complex natural fractures. The cohesive element method and the maximum principal stress fracture criterion were used in the new model. An analysis was conducted to investigate the impact of various factors, including encounter angle, in situ stress, elastic modulus, and Poisson’s ratio, on the propagation of hydraulic fractures. The simulation results indicate that the encounter angle and the in situ stress are the main factors affecting the fracture morphology. When the encounter angle and the in situ stress difference are small, hydraulic fractures propagate along natural fractures. When the elastic modulus is small, it is advantageous for the advancement of both hydraulic... [more]

Coffee is not merely a refreshing beverage but also invigorates people, provides relaxation, contributes to human health, and fosters closer social connections. Coffee is one of the most widely consumed beverages worldwide and the most traded commercial commodity. Moreover, the rapid development of the Vietnamese coffee industry caused some concerns due to its insufficient performance and the fierce competition within the industry. It is significant to establish an efficient supply network; notwithstanding, supplier selection has always been a challenge for companies. Therefore, this paper employs a hybrid model to determine the supplier selection criteria, a vital factor for a manufacturer under practical operating conditions. Firstly, a combined model of Grey forecasting and the Grey Fourier series is applied to forecast future rainfall and temperature data for six consecutive years. Secondly, based on the criteria, strategies, and buyer requirements, the single-objective linear prog... [more]

Energy consumption is one of the important indicators of green development. The pressure drop and the particle kinetic energy loss in the pipe bend result in high energy consumption of wheat pneumatic conveying. In this paper, the CFD-DEM method is used to study the characteristics of flow field in horizontal pipe bend. The results show that the particles converge together under the force of the curved pipe wall to form a particle rope. With increasing pipe bend ratio R/D, the aggregation of particle bundles becomes stronger and the particle spiral phenomenon decreases. The particles impact the pipe wall at an angular position of θ = 30−60° around the bend, and their velocity decreases slowly under the friction resistance of the pipe wall. The velocity loss caused by particles impacting on the pipe wall increases with increasing initial velocity. When the particle mass flow rate is 1.26 kg/s and the gas velocity is 10 m/s, the pressure drop in the bend decreases and then increases with... [more]

Gas concentration monitoring is an effective method for predicting gas disasters in mines. In response to the shortcomings of low efficiency and accuracy in conventional gas concentration prediction, a new method for gas concentration prediction based on Particle Swarm Optimization and Long Short-Term Memory Network (PSO-LSTM) is proposed. First, the principle of the PSO-LSTM fusion model is analyzed, and the PSO-LSTM gas concentration analysis and prediction model is constructed. Second, the gas concentration data are normalized and preprocessed. The PSO algorithm is utilized to optimize the training set of the LSTM model, facilitating the selection of the training data set for the LSTM model. Finally, the MAE, RMSE, and coefficient of determination R2 evaluation indicators are proposed to verify and analyze the prediction results. Gas concentration prediction comparison and verification research was conducted using gas concentration data measured in a mine as the sample data. The exp... [more]

The separation section of the methanol-to-olefin (MTO) process is energy-intensive, and the optimization and heat integration can enhance energy efficiency and reduce costs. A bi-level optimization model framework is proposed to optimize the separation process and simultaneously integrate the heat exchanger network (HEN). The upper level employs a data-driven BP neural network proxy model instead of the mechanism model for the separation process, while the lower level adopts a stage-wise superstructure for the HEN without stream splits. The interaction between the two systems is realized effectively through information exchange. A bi-level particle swarm algorithm is employed to optimize complex problems and determine the optimal operational parameters for the distillation system and HEN. Compared with the typical sequential synthesis method, the optimization by the proposed approach reduces the total annual cost by 1.4293×106 USD/y, accounting for 4.76%.