Heat-pipe-cooled microreactors (HPMR) use a passive high-temperature alkali metal heat pipe to directly transfer the heat of solid core to the hot end of the intermediate heat exchanger or thermoelectric conversion device, thus avoiding a single point failure. To analyze and evaluate the transient safety characteristics of an HPMR system under accident conditions, such as heat pipe failure in the core or a loss of system heat sink and other accidents, a previously developed model for transient analysis of a heat-pipe-cooled space nuclear reactor power system (HPSR) was improved and validated in this study. The models improved mainly comprise: (1) An entire 2-D solid-core heat transfer model is established to analyze the accident conditions of core heat pipe failure and system heat sink loss. In this model, radial and axial Fourier heat conduction equations are used to divide the core into r-θ direction control volumes. The physical parameters of the material in the control volume are c... [more]

When a hydrokinetic turbine operates in a confined flow, blockage effects are introduced, altering the flow at and downstream of the rotor. Blockage effects have a significant effect on the loading and performance of turbines. As a result, understanding them is critical for hydrokinetic turbine design and performance prediction. The current study examines the main and interaction effects of solidity (σ), tip speed ratio (TSR), blockage ratio (ε), and pitch angle (θ) on how the blockage influences the performance (CP) of a three-bladed, untwisted, untapered horizontal axis hydrokinetic turbine. The investigation is based on validated 3D computational fluid dynamics (CFD), design of experiments (DOE), and the analysis of variance (ANOVA) approaches. A total number of 36 CFD models were developed and meshed. A total of 108 CFD cases were performed as part of the analysis. Results indicated that the effect of varying θ was only noticeable at the high TSR. Additionally, the rate of incremen... [more]

Food waste is one of the biggest global challenges. Thinking and acting for closed-loop cycles for energy and resources recovery is pivotal for meeting the Sustainable Development Goal 12.3 (SDG 12.3) by 2030. In this paper, the multifaceted problem of food waste and Greece’s national policy of circular economy is briefly given. Greece produces the highest annual per capita food waste output (142 kg) in Europe, indicating that the problem is rather large for the country. The solution to the problem inextricably linked to the implementation of the food waste hierarchy, was investigated through a survey integrating the possibility of energy recovery. The tailored questionnaire sent via e-mails and social media with the goal of identifying a snapshot of Greek citizens’ conceptions and practices regarding the management of their household food waste, and their familiarity with circular economy concepts. Results have shown that most respondents are aware of the problem’s existence, however,... [more]

With the increasingly stringent regulations on air quality and the consequent emission limits for internal combustion engines, researchers are concentrating on studying new solutions for improving efficiency and energy saving even in off-road mobile machines. To achieve this task, pump-controlled or displacement-controlled systems have inspired interest for applications in off-road working machines. Generally, these systems are derived from the union of a hydraulic machine coupled to an electric one to create compact components that could be installed near the actuator. The object of study of this work is a 9-ton excavator, whose hydraulic circuit is grounded on load sensing logic. The validated mathematical model, created previously in the Simcenter Amesim© environment, represents the starting point for developing electro-hydraulic solutions. Electric components have been inserted to create different architectures, both with open- and closed-circuit layouts, in order to compare the en... [more]

The ability of high-fidelity computational fluid mechanics simulation to quantitatively predict the influence of ground roughness on the evolution of the wake of a three-bladed horizontal axis wind turbine model is tested by comparison with wind tunnel measurements. The approach consists of the implicit approximate deconvolution large-eddy simulation formulation of Hickel et al., (2006), that is, for the first time, combined with a wall-stress model for flow over rough surfaces and with the actuator line approach (ALM) for modeling of the rotor. A recycling technique is used for the generation of turbulent inflow that matches shear exponents α=0.16 (medium roughness) and α=0.32 (high roughness) and turbulence level of the reference experiments at hub height. Satisfactory agreement of the spectral content in simulation and experiment is achieved for a grid resolution of 27 cells per rotor radius. Except for minor differences due to neglecting nacelle and tower in the simulation the LES... [more]

The high dependence on imported fuels, the need to reduce greenhouse gas (GHG) emissions and the need to develop a low-carbon economy are reasons for the development of the renewable energy market in Poland. The wider use of biofuels can be a method for reducing oil dependence and reducing CO2 emission. Opportunities to reduce emissions and meet international requirements in the field of environmental protection are seen, among others, in the development of the production and greater use of biocomponents, including bioethanol. This article presents the current state of development in the area of bioethanol production in Poland. An outline of legal regulations in the examined area and statistical data, as well as the largest producers and their production capacity, are presented. The basic time range of analyses covered the years 2015−2019. According to the analyses, liquid biofuels in Poland are used on a small scale, although over 2015−2019, the production of bioethanol as a biocompon... [more]

Recent research studies on industrial cyber-physical systems (ICPSs) have witnessed vast patronage with emphasis on data utility for improved design, maintenance, and high-level decision making. The design of proton-exchange membrane fuel cells (PEMFC) is geared towards improving performance and extending life cycles. More often, material selection of PEMFC components contributes a major determining factor for efficiency and durability with the seal/gasket quality being one of the most critical components. Finite element analysis (FEA) offers a simulated alternative to real-life stress analysis of components and has been employed on different rubber-like gasket materials for hydrogen fuel cells for determining an optimal strain energy density function using different hyperelastic models following uniaxial tensile testing. The results show that the Mooney−Rivlin, Ogden, and Yeoh models were the most fitting model with the best stress−strain fit following a weighted error evaluation crit... [more]

Conventional vehicles, having internal combustion engines, use lead-acid batteries (LABs) for starting, lighting, and ignition purposes. However, because of new additional features (i.e., enhanced electronics and start/stop functionalities) in these vehicles, LABs undergo deep discharges due to frequent engine cranking, which in turn affect their lifespan. Therefore, this research study seeks to improve LABs’ performance in terms of meeting the required vehicle cold cranking current (CCC) and long lifespan. The performance improvement is achieved by hybridizing a lead-acid with a lithium-ion battery at a pack level using a fully active topology approach. This topology approach connects the individual energy storage systems to their bidirectional DC-DC converter for ease of control. Besides, a battery management strategy based on fuzzy logic and a triple-loop proportional-integral (PI) controller is implemented for these conversion systems to ensure effective current sharing between lea... [more]

Energy has become an integral part of our society and global economic development in the twenty-first century. Despite tremendous technological advancements, fossil fuels (coal, natural gas, and oil) continue to be the world’s primary source of energy. Global energy scenarios indicate a change in coal consumption trends in the future, which in turn will have commercial, geopolitical, and environmental consequences. We investigated coal consumption up to 2030 using a new hybrid method of WOANFIS (whale optimization algorithm and adaptive neuro-fuzzy inference system). The WOANFIS method’s performance was assessed by the MSE (Mean Squared Error), MAE (Mean Absolute Error), STD (error standard deviation), RMSE (Root Mean Squared Error), and coefficient of correlation (R2) among the real dataset and the WOANFIS result. For the prediction of global coal consumption, the proposed WOANFIS had the best MAE, RMSE, and correlation coefficient (R2) values, which were 0.00113, 0.0047, and 0.98, re... [more]

This paper concerns the study of coupled effects of electrohydrodynamic (EHD) and thermocapillary (TC) on the dynamic behaviour of a single liquid droplet. An incompressible Smoothed Particle Hydrodynamic (ISPH) multiphase model is used to simulate EHD-TC driven flows. The complex hydrodynamic interactions are modeled using the continuum surface force (CSF) method, in which the gradient of the interfacial tension and the Marangoni forces are calculated with an approximated error or 0.014% in the calculation of Marangoni force compared to the analytical solutions which is a significant improvement in comparison with previous SPH simulation studies, under the assumption that the thermocapillarity generates sufficiently large stress to allow droplet migration, while the electrohydrodynamic phenomena influences the droplet morphology depending on the electrical and thermal ratios of the droplet and the ambient fluid. This study shows that, when applying a vertical electric field and therma... [more]

In this paper, a 2D distinct element method (DEM) model of a deep tunnel in an underground coal mine is built to thoroughly evaluate the effects of yielding (D-bolt and Roofex) and the traditional rockbolt (fully resin-grouted rebar) on controlling self-initiated strainbursts. The occurrence of self-initiated strainbursts is judged based on the stiffness difference between the loading system and rock masses for the first time. The results suggest that the total deformations of the tunnel supported with Roofex and resin-grouted rebar are 1.53 and 2.09 times that of D-bolts (1411 mm). The average velocities of detached rock blocks in the tunnel supported with Roofex and resin-grouted rebar are 3.22 and 3.97 m/s, respectively, which are much higher than that of D-bolts (0.34 m/s). 13 resin-grouted rebar bolts are broken during the strainburst, while D-bolts and Roofex survive. Compared with Roofex (295.16 kJ) and resin-grouted rebar (125.19 kJ), the D-bolt can reduce the most kinetic ener... [more]

The design features of a centrifugal compressor must guarantee high performance and a wide operating range. The ported shroud was developed specifically to extend the operating limit. It is a passive flow control device based on a cavity for flow recirculation to avoid blade passage blocking in near surge conditions. A CFD simulation campaign using a simplified model identified the differences in the performance of the centrifugal compressor with ported shroud, compared to the baseline case. The use of a stability criterion to determine the limit mass flow rate, developed in a previous study by the authors, highlighted and quantified the extension of the surge margin in the case with ported shroud for different rotational speeds. An increase in the surge margin of 11% was detected at design speed, but with a lower trend at higher speeds. An in-depth flow analysis showed the main physical mechanisms in the compressor that occur for different operating conditions: at near surge condition... [more]

In the context of energy conservation and the reduction of CO2 emissions, inconsistencies between the inevitable emission of CO2 in traditional hydrogen production methods and eco-friendly targets have become more apparent over time. The catalytic decomposition of methane (CDM) is a novel technology capable of producing hydrogen without releasing CO2. Since hydrogen produced via CDM is neither blue nor green, the term “turquoise” is selected to describe this technology. Notably, the by-products of methane cracking are simply carbon deposits with different structures, which can offset the cost of hydrogen production cost should they be harvested. However, the encapsulation of catalysts by such carbon deposits reduces the contact area between said catalysts and methane throughout the CDM process, thereby rendering the continuous production of hydrogen impossible. This paper mainly covers the CDM reaction mechanisms of the three common metal-based catalysts (Ni, Co, Fe) from experimental... [more]

Among all the activities in a society, construction has a key role in environmental, social, and economic pillars. Construction is also responsible for a considerable amount of waste production, energy consumption, pollutant gas emissions, and consumption of nonrenewable natural resources. Regarding energy consumption, a high demand for building operational energy has been observed in the last decades due to the more demanding requirements of the users with a continuous search for better thermal comfort in their homes, namely in developed countries. In Portugal, for instance, more than 20% of the electricity consumed is related to residential buildings, which is based on CO2 emissions and other pollutants that negatively affect the environment. Much of this consumed energy is a result of the HVAC systems installed inside buildings to provide users with thermal comfort. One exciting opportunity to mitigate buildings’ operational energy consumption while contributing to thermal user comf... [more]

The need to accelerate the innovation and application of the supply chain has been suggested by the State Council of China. To solve the problem of data isolation caused by privacy protection in the power material supply chain, a data traceability and sharing mechanism based on blockchain is designed in this paper. Firstly, the existing problems of the power material supply chain are introduced, and the applicability of blockchain in the power material supply chain in view of these problems is analyzed. Secondly, blockchain-based power material supply deployment and application structures are proposed. Then, considering the problem of data isolation in the material inspection and distribution links between suppliers and the material company, a data traceability mechanism based on blockchain is designed to provide evidence for the data authenticity and a proxy re-encryption method is used to ensure security and privacy in data sharing. Finally, the effectiveness of the proposed data tra... [more]

Although various simulation studies on gas hydrate production have been conducted, a single vertical well in the cylindrical system has been adopted in most research. However, this system has a limited ability to predict commercial production in gas hydrate reservoirs. In order to facilitate commercial production, a field-scale reservoir model with a multi-well system must be constructed using geological data, such as seismic data, well logging data, core data, etc. The depressurization method is regarded as a practical production strategy because it has high levels of production efficiency and economical effectiveness. However, this method can lead to subsidence due to the increased effective stress. In this work, we studied a production simulation strategy for commercial gas hydrate production. A three-dimensional geological model with a realistic field scale is constructed using seismic and well logging data from the Ulleung Basin of the Korean East Sea. All of the grids are refined... [more]

The building sector is undergoing a deep transformation to contribute to meeting the climate neutrality goals set by policymakers worldwide. This process entails the transition towards smart energy-aware buildings that have lower consumptions and better efficiency performance. Digitalization is a key part of this process. A huge amount of data is currently generated by sensors, smart meters and a multitude of other devices and data sources, and this trend is expected to exponentially increase in the near future. Exploiting these data for different use cases spanning multiple application scenarios is of utmost importance to capture their full value and build smart and innovative building services. In this context, this paper presents a high-level architecture for big data management in the building domain which aims to foster data sharing, interoperability and the seamless integration of advanced services based on data-driven techniques. This work focuses on the functional description o... [more]

Alluaudite-type materials are systematically attracting more attention as prospective cathode materials for sodium-ion batteries. It has been demonstrated that optimized thermal nanocrystallization of glassy analogs of various cathode materials may lead to a significant increase in their electrical conductivity. In this paper, three alluaudite-like glasses (Na2Fe3(PO4)3—FFF, Na2VFe2(PO4)3—VFF, and Na2VFeMn(PO4)3—VFM) were synthesized and subjected to an optimized thermal nanocrystallization. This procedure resulted in nanostructured samples with increased electrical conductivity at room temperature: 5×10−7 S/cm (FFF), 7×10−5 S/cm (VFM), and 6×10−4 S/cm (VFF). The nanocrystalline microstructure was also evidenced by ultra-high-frequency impedance spectroscopy (up to 10 GHz) and proposed electrical equivalent circuits. Prototype electrochemical cells were assembled and characterized with voltage cutoffs of 1.5 and 4.5 V. The electrochemical performance was, however, modest. The gravimetr... [more]

The design of Passive Power Filters (PPFs) has been widely acknowledged as an optimization problem. This paper addresses the PPF parameters design problem using the novel Manta Ray Foraging Optimization (MRFO) algorithm. Moreover, an analytical method based on Monte Carlo Simulation (MCS) is proposed to investigate the harmonic performance of such an optimally designed PPF with variations in power networks. The MRFO algorithm has shown a superior solution-finding ability, but a relatively higher computational effort in comparison with other recently proposed algorithms. The harmonic performance of the optimal PPF solution with uncertainties was analyzed using the proposed method. The results imply that the optimally designed PPF can effectively attenuate the high-order harmonics and improved the system performance parameters over different operating conditions to continually comply with the standard limits. The proposed MCS method showed that the optimally designed PPF reduced the volt... [more]

This study is an effort to cover and interconnect multiple aspects of the fabrication of the yttria-stabilized zirconia (YSZ) from powder preparation to a solid electrolyte suitable for utilization in solid oxide cells. Thus, a series of YSZ electrolytes was prepared, differing in the content of the Y2O3 dopant and in the method of preparation. Combustion synthesis along with the thermal decomposition of precursors was used for YSZ powder synthesis with a dopant content of 8 to 18 mol.%. Post-synthesis treatment of the powder was necessary for achieving satisfactory quality of the subsequent sintering step. The morphology analyses of the YSZ powders and sintered electrolytes produced proved that small particles with a uniform size distribution are essential for obtaining a dense electrolyte. Furthermore, the conductivity of YSZ electrolytes with different Y2O3 contents was examined in the temperature range of 400 to 800 °C. The lowest conductivity was found for the sample with the high... [more]

The size reduction in on-board apparatuses in flying platforms, ships, and aerospace vehicles can be achieved by increasing the frequency of the on-board grid voltage. In the case of renewable powered platforms, a grid converter is used that has the primary task of feeding the generated energy into the on-board grid. The paper describes the developed control system of the grid converter, which, in addition to transferring the generated power to the single-phase grid, effectively compensates the reactive power occurring in it. The proposed structure of the proportional resonant regulator with finite gain that cooperates with the single-phase grid was discussed. The use of quadrature estimators of voltage and current enabled independent control of the active and reactive components of the current, thus compensating for the reactive power. The proposed control system structure was implemented on the FPGA platform and experimentally tested in steady state and dynamic condition considering... [more]

In the roadmaps of the automotive industry, the electric vehicle (EV) is regarded as a crucial technology for the future of automotive power systems. The EV has become a top priority of major global car manufacturers and is expected to disrupt the road transportation sector. In Malaysia and Indonesia, EVs just started as an important force. However, in Malaysia, the lack of EV infrastructure, along with its strong dependency on fossil fuels, poses an enormous challenge. The situation is very similar in Indonesia. Indonesia has huge potential as Southeast Asia’s largest vehicle market and a major nickel producer, an important EV battery ingredient. Therefore, this article addresses several critical issues in implementing EVs in Malaysia and Indonesia. In preparing this review, we have thoroughly selected very important EV keywords that are frequently asked. We have also interviewed some prominent figures in the field of EV to address the most critical aspects worth including in the pape... [more]

The power system is moving away from the centralized generation paradigm. One of the current trends is the microgrid concept, where loads, small generators and renewable energy resources (RERs) that are in close proximity are controlled as one entity. Microgrids also allow for an increase in power availability as they can continue to supply electric power to loads even in the absence of a connection to the main grid. During the transition to islanded operation, microgrids may be subject to frequency disturbances caused by the power imbalance between load and generation. When microgrids contain high shares of renewable energy, the challenge is significantly higher due to the control strategies that aim to maximize power production, which are typically applied to RERs and render them insensitive to grid changes. Therefore, new control strategies need to be developed to enable the participation of RERs in the support of the frequency response. This work proposes a predictive control strat... [more]

This paper presents the use of real-time digital simulator (RTDS) and hardware-in-the-loop (HIL) methods for the validation of an energy management system designed for real low-voltage (LV) distribution networks with a high penetration of renewable energy sources. The system is used to address voltage violations and current overloading issues and allows the network operator to maintain safe and controllable network operations. The applied control strategy and the system software were verified by means of simulations. In this paper, the next stage of system validation using the HIL method is presented. A testbed was designed and developed to test the operation of prototype controllers of the system in flexible and reproducible conditions before installing them in the network. The presented testing platform not only includes the LV network simulator with the power amplifiers needed for closed-loop setup but also additional elements of a real network to which the system is dedicated, i.e.... [more]

When a substantial number of wind parks are approaching the end of their lifespan, and developers of renewables are facing decisions about what to do with their assets, concepts such as hybrid power plants are emerging as a promising solution to enable renewable integration in a cost-effective and robust manner. This work proposes a decision-aid algorithm to perform a comprehensive analysis of hybrid power plants, focusing on the energetic contribution and economic feasibility of converting existing wind power plants into hybrid power plants (i.e., installing photovoltaic panels and a storage system). The analysis was performed by comparing the option of converting existing wind plants into hybrid plants with a pure repowering exercise or overplanting using wind technology only. The obtained results unequivocally demonstrate the added value of hybrid power plants as they promote: (i) a higher installed capacity and yearly capacity factor (up to 50%); (ii) an increased efficiency of exi... [more]