This paper addresses the problem of quality modeling in polymethyl methacrylate (PMMA) production. The key challenge is handling the large amounts of missing quality measurements in each batch due to the time and cost sensitive nature of the measurements. To this end, a missing data subspace algorithm that adapts nonlinear iterative partial least squares (NIPALS) algorithms from both partial least squares (PLS) and principal component analysis (PCA) is utilized to build a data driven dynamic model. The use of NIPALS algorithms allows for the correlation structure of the input−output data to minimize the impact of the large amounts of missing quality measurements. These techniques are utilized in a simulated case study to successfully model the PMMA process in particular, and demonstrate the efficacy of the algorithm to handle the quality prediction problem in general.

Metal hydrides have recently been proposed for not only hydrogen storage materials but also high-efficiency thermal storage materials. NaMgH3 contains a considerable theoretical thermal storage density of 2881 kJ/kg. However, its sluggish de/re-hydrogenation reaction kinetics and poor cycling stability exhibit unavailable energy efficiency. Doping with active catalyst into NaMgH3 is deemed to be a potential strategy to mitigate these disadvantages. In this work, the enhancement of de/re-hydrogenation kinetics and cycling properties of NaMgH3 is investigated by doping with lamellar-structure 2D carbon-based MXene, Ti3C2. Results shows that introducing 7 wt.% Ti3C2 is proved to perform excellent catalytic efficiency for NaMgH3, dramatically reducing the two-step hydrogen desorption peak temperatures (324.8 and 345.3 °C) and enhancing the de/re-hydrogenation kinetic properties with the hydrogen desorption capacity of 4.8 wt.% H2 within 15 min at 365 °C and absorption capacity of 3.5 wt.%... [more]

Recently, bioactive peptides as a health-promoting agent have come to the forefront of health research; however, industrial production is limited, possibly due to the lack of the required technological knowledge. The objective of the investigation was to prepare bioactive peptides with hypoallergenic properties from liquid milk protein concentrate (LMPC), through sequential enzymatic and microbial hydrolysis. LMPC was produced from ultra-heat-treated (UHT) skimmed cow’s milk using a nanofiltration membrane. The effect of the concentration of trypsin (0.008−0.032 g·L−1) on the hydrolysis of LMPC was studied. Subsequently, the hydrolysis of tryptic-hydrolyzed LMPC (LMPC-T) with lactic acid bacteria was performed, and the effect of glucose in microbial hydrolysis was studied. Aquaphotomic analysis of the hydrolysis of LMPC was performed using the spectral range of 1300−1600 nm (near-infrared spectra). Changes in antioxidant capacity, anti-angiotensin-converting enzyme activity, and antiba... [more]

Traditional smooth stitching method for the texture seams of remote sensing images is affected by gradient structure information, leading to poor stitching effect. Therefore, a smooth stitching method for the texture seams of remote sensing images based on gradient structure information is proposed in this research. By matching the feature points of remote sensing images and introducing a block link constraint and shape distortion constraint, the modified stitching image is obtained. By using remote sensing image fusion, the smooth stitching image of texture seams is obtained, and the local overlapping area of the texture is optimized. The main direction of texture seams is determined by calculating the gradient structure information of texture seams in horizontal and vertical directions. By selecting the initial point, the optimal stitching line is extracted by using the minimum mean value of the cumulative error of the smooth stitching line. By using the method of boundary correlatio... [more]

The effect of H2SO4 and FeSO4 concentrations and temperature on the efficacy of decontamination of spent ion-exchange resins was estimated. The study was performed on model spent ion-exchange resins purposefully contaminated with hematite and Co-57 radionuclide. It was found that an increase in solution temperature up to 50 °C and the addition of FeSO4 increases the efficacy of decontamination of spent ion-exchange resins by 1 M and 2 M H2SO4 solutions by 1−2 orders of magnitude, whereas the decontamination factor value here is >103. Since under static conditions, the secondary adsorption of Co-57 was observed, the extra washing of ion-exchange resins by 3 M solution of NaNO3 is required. Decontamination under dynamic conditions excludes the secondary adsorption of Co-57, so that the necessity of the extra stage of washing can be skipped. Under dynamic conditions, the consumption of a solution of the composition H2SO4 (1 mol/L) + FeSO4 (0.2 mol/L) is 1.5-fold lower in comparison with t... [more]

The resorcinol (R)-formaldehyde (F) polymerization was carried out in different experimental conditions to obtain RF/Mo doped carbon xerogels with different morphology, porosity and nature and dispersion of metal. Attractive or repulsive electrostatic interactions were forced in the starting aqueous solution of RF-monomers using different synthesis conditions, namely, combinations of cationic or anionic surfactants, Mo-precursors and pH values. The results showed that when both cationic surfactant and Mo-precursor were used at neutral pH, attractive interactions with the anionic RF-macromolecules are favored during polymerization and the final carbon xerogel exhibited the most developed porosity and the strongest Mo-organic phase interaction, leading to deeper Mo-phase reduction during carbonization and the formation of highly-dispersed crystalline nanoparticles of Mo2C. On the contrary, the use of both anionic surfactant and Mo-precursor leads to repulsive interactions, which generate... [more]

The ambitious United Nations Sustainable Development Goal for 2030 to “leave no one behind” concerning safe drinking water calls for the development of universally applicable and affordable decentralized treatment systems to provide safe drinking water. Published results suggest that well-designed biological sand filters (BSFs) amended with metallic iron (Fe0-BSFs) have the potential to achieve this goal. Fe0-BSFs quantitatively remove pathogens and a myriad of chemical pollutants. The available data were achieved under various operating conditions. A comparison of independent research results is almost impossible, especially because the used Fe0 materials are not characterized for their intrinsic reactivity. This communication summarizes the state-of-the-art knowledge on designing Fe0-BSFs for households and small communities. The results show that significant research progress has been made on Fe0-BSFs. However, well-designed laboratory and field experiments are required to improve t... [more]

Efforts to isolate a broad-spectrum antimicrobial peptide (AMP) from microbial sources have been on the rise recently. Here, we report the identification, the optimization of the culture conditions, and the characterization of an efficient AMP from the Bacillus strain designated MS07 that exhibits antimicrobial and antibiofilm activity. The production of MS07 was maximized by evaluating the culture conditions by the response surface methodology to obtain optimum media compositions. The biochemical integrity of MS07 was assessed by a bioassay indicating inhibition at ~6 kDa, like tricine-SDS-PAGE. MALDI-TOF confirmed the molecular weight and purity, showing a molecular mass of 6.099 kDa. Peptide MS07 exhibited antimicrobial activity against both Gram-positive and Gram-negative bacteria. The MIC of MS07 for Escherichia coli, Alcaligenes faecalis, MRSA, and Pseudomonas aeruginosa ranged from 16−32 µg/mL, demonstrating superior potency. The biomass was diminished by about 15% and 11%, with... [more]

Supply chains (SC) aim to provide products to the final customer at a certain service level. However, unforeseen events occur that impede supply chain objectives. SC Risk has been studied in the literature, providing frameworks and methodologies to manage SC failures. Nevertheless, more efforts are needed to prevent hazardous and disruptive risks and their consequences. These risks must be considered during the process of designing a supply chain. Some methodological contributions concerning risk in the supply chain network design (SCND) are conceptual frameworks for mitigating SC disruptions, which suggest strategies and measures for designing robust and resilient SCs. Although such contributions are valuable, they do not indicate how to cope with risk when designing a SC. The main objective of this research is to describe a methodology aimed at including risk considerations into the SCND. Our proposal aims to be, on the one hand, a comprehensive approach that includes a risk identifi... [more]

Ionic liquids which are often classified as low melting point salts have received significant attention from research groups and industries to be used in a wide range of applications. Many of these applications require thorough knowledge on the thermophysical properties of the ionic liquids before utilizing their full potentials in various fields. In this work, a series of alkylammonium cation and carboxylate anion-based room temperature protic ionic liquids (PILs) were synthesized by varying length of alkyl chain of the cation from diethyl to dibutyl combined with pentanoate, hexanoate and heptanoate anions. These ammonium-based PILs named as diethylammonium pentanoate [DEA][C5], diethylammonium hexanoate [DEA][C6], diethylammonium heptanoate [DEA][C7], dibutylammonium pentanoate [DBA][C5], dibutylammonium hexanoate [DBA][C6] and dibutylammonium heptanoate [DBA][C7] were characterized using Nuclear Magnetic Resonance (NMR) spectroscopy. The thermophysical properties of the PILs namely... [more]

The research of oil/air two-phase flow and heat transfer is the fundamental work of the design of lubrication and heat transfer in aero-engine bearing chamber. The determination of impact state criterion of the moving oil droplets with the wall and the analysis of oil droplet deposition characteristics are important components. In this paper, the numerical analysis model of the impact between the moving oil droplet and the wall is established by using the finite volume method, and the simulation of oil droplet impingement on the wall is carried out. Then the effects of oil droplet diameter, impact velocity, and incident angle on the characteristic parameters of impact state are discussed. The characteristic parameters include the maximum spreading length, the maximum spreading width, and the number of splashing oil droplets. Lastly the calculation results are verified through comparing with the experimental results in the literature. The results show as follows: (1) The maximum spreadi... [more]

Food safety is about everyone’s health. Through risk assessment and early warning of food safety, food-related safety issues can be identified as early as possible and take timely precautions. However, the detection data of food safety are complex and non-linear, so it is necessary to find the relationship and hierarchical representation of factors affecting food safety. This paper presents an improved entropy weight based on Hasse diagram technology (HDT) method to analyze the influencing factors of food safety. The entropy weight method was used to calculate the weight of each factor index, and the relationship matrix was obtained. Then, the data of infant milk powder in China were analyzed hierarchically by the HDT method. Thus, we can obtain the multi-level structure that affects food safety. It provides an effective basis for early warning of food safety, can help government regulators to strengthen management, and urge enterprises to produce food safely.

Heterotrophic bacteria are able to form biofilms in water processing systems, adhering to pipe materials and colonizing surfaces. The aim of our research was to identify the critical points in the process of bottled water production at which controls can be applied to prevent, reduce, or eliminate water safety hazards. Microbiological monitoring was conducted using the plate count method and luminometry. To identify the bacterial isolates, we used polyphasic identification based on biochemical tests and molecular analysis using ribosomal RNA. The heterotrophic plate counts were higher in the water filtration station, ultrafiltration (UV) disinfection station, and holding tank. At these points of the industrial process, the water is stagnant or there is poor flow. Molecular analysis identified the bacterial isolates as belonging to Acinetobacter, Agrobacterium, Aeromonas, Brevundimonas, Citrobacter, Enterobacter, Klebsiella, Pantoea, and Rhizobium genera. Bacterial isolates showed vario... [more]

The EU is committed to achieve ambitious energy efficiency and CO2 reduction targets. Regarding improving the energy performance of the building stock, detailed building related energy data made accessible by means of GIS are crucial. For this purpose, geo-referenced data from Energy Performance Certificates (EPC) according to the Energy Performance of Buildings Directive is of central importance, in order to facilitate decision-making about large-scale renovation projects and developing targeted products and services. The ENERFUND project developed a method and subsequently an internet based tool making use of EPC data from 13 EU member states as well as other open-source data (such as renovation costs), thus clearly demonstrating the feasibility and usefulness of this approach. However, also technical challenges and legal barriers were encountered, such as a lack of data and varying data specifications depending on the national transposition of the European Directive, and different i... [more]

CO2 flooding is an important method for improving oil recovery for reservoirs with low permeability. Even though CO2 could be miscible with oil in regions nearby injection wells, the miscibility could be lost in deep reservoirs because of low pressure and the dispersion effect. Reducing the CO2−oil miscibility pressure can enlarge the miscible zone, particularly when the reservoir pressure is less than the needed minimum miscible pressure (MMP). Furthermore, adding intermediate hydrocarbons in the CO2−oil system can also lower the interfacial tension (IFT). In this study, we used dead crude oil from the H Block in the X oilfield to study the IFT and the MMP changes with different hydrocarbon agents. The hydrocarbon agents, including alkanes, alcohols, oil-soluble surfactants, and petroleum ethers, were mixed with the crude oil samples from the H Block, and their performances on reducing CO2−oil IFT and CO2−oil MMP were determined. Experimental results show that the CO2−oil MMP could be... [more]

In order to study the mechanics and acoustic emission (AE) characteristics of fractured rock under water-rock interaction, dried and saturated sandstone samples with prefabricated double parallel cracks were prepared. Then, uniaxial compression experiments were performed to obtain their AE signals and crack propagation images. The results show that water reduces the strength and fracture toughness of fractured sandstone and enhances plasticity. After saturation, the samples start to crack earlier; the cracks grow slowly; the failure mode is transformed from shear failure along the prefabricated cracks to combined shear and tensile failure; more secondary cracks are produced. The saturated samples release less elastic energy and weaker AE signals in the whole failure process. However, their AE precursor information is more obvious and advanced, and their AE sources are more widely distributed. Compared with dry specimens, the AE frequencies of saturated specimens in the early stage of l... [more]

At present, most sensor calibration methods are off-line calibration, which not only makes them time-consuming and laborious, but also causes considerable economic losses. Therefore, in this study, an online calibration method of current sensors is proposed to address the abovementioned issues. The principle and framework of online calibration are introduced. One of the calibration indexes is angular difference. In order to accurately verify it, data acquisition must be precisely synchronized. Therefore, a precise synchronous acquisition system based on GPS timing is proposed. The influence of ionosphere on the accuracy of GPS signal is analyzed and a new method for measuring the inherent delay of GPS receiver is proposed. The synchronous acquisition performance of the system is verified by inter-channel synchronization experiment, and the results show that the synchronization of the system is accurate. Lastly, we apply our online calibration method to the current sensor; the experimen... [more]

This paper analyzes the performance of a three-phase converter architecture with a reduced common mode voltage to be used in electric motor drives. Starting from the classical three-phase bridge architecture, two additional switches are inserted in the DC link, in order to decouple the source from the load during the freewheeling intervals. Ad-hoc modulation strategies are introduced and evaluated against the classical three-phase space vector modulation. Three main parameters are analyzed: common mode voltage, efficiency and reliability. Experimental measurements on a converter prototype are used to evaluate the common mode performance. The efficiency in the case of Si-IGBT and SiC-MOSFETs is experimentally evaluated. Reliability analysis performed with a Coffin-Mason model showed that the higher efficiency offered by the SiC devices allows for a marked extension of the lifetime.

In inductive power transfer (IPT) systems, series−series (S-S) and double capacitances and inductances−series (LCCL-S) compensation topologies are widely utilized. In this study, the basic characteristics of S-S and LCCL-S are analyzed and compared in the tuning state. In addition, considering the universality of detuning, and because the two topologies have the same secondary structures, the voltage and current stress on components, input impedances, voltage gains, and output powers of S-S and LCCL-S are mainly analyzed and compared in the detuning state, which is caused by variations in the secondary compensation capacitance. To compare the efficiency of the two topologies and verify the comparative analysis, comparative experiments based on a 2.4-kW IPT experimental prototype are conducted. The comparative result shows that the S-S compensation topology is more sensitive to load variations and less sensitive to secondary compensation capacitance variations than LCCL-S. Both in the t... [more]

Active power filters (APF) aim at solving the harmonic problem originated by the nonlinear load in power systems. However, the high dv/dt and di/dt outputs from power electronic devices in a voltage source converter on APF introduced unwanted conducted electromagnetic interference (EMI) when compensating for the low-frequency harmonic components. Hence, this paper develops a spectrum analysis approach to investigate and quantify the source differential-mode (DM) voltage of a single-phase shunt APF to suppress the DM EMI via periodic carrier frequency modulation (PCFM). In this scheme, the analytical expressions of source DM voltage in the APF using the PCFM scheme are obtained with a double Fourier series. In addition, the influence of PCFM parameters on the source DM voltage spectrum is predicted based on the analytical expression. As a result, the PCFM parameters, which have the best suppression effect on the DM EMI are obtained. The experiment results proved the validity of the sawt... [more]

This study analyzes the political viability of the Russia-North Korea-South Korea (RNS) gas pipeline project. This analysis demonstrates that North Korea’s fourth nuclear test in January 2016 changed the dynamic of the project. Before the test, when inter-Korean relations were good, South Korea and Russia could make efforts to secure political support for the project. However, after the fourth nuclear test, this was no longer the case. As North Korea’s nuclear power status became more evident, this nuclear problem began to have profound implications for U.S. security. In response, Washington not only led the UN Security Council to impose very severe sanctions against North Korea, but also placed its own sanctions on the country. These sanctions began to contain provisions that could prevent the implementation of the pipeline project. In addition to these sanctions, the U.S. sanctions against Russia in 2017 over its intervention in the U.S. election and aggression against Ukraine also c... [more]

The authors wish to make the following corrections to this paper [...]

The half bridge (HB) modular multilevel converter (MMC) technology is considered a breakthrough to mitigate the shortcomings of the conventional voltage source converter (VSC) in high-voltage direct-current (HVDC) grid application. However, interruption of the DC fault is still a challenge due to fast di/dt and extremely high levels of DC fault current. The fault interruption using a DC circuit breaker (DCCB) causes enormous energy dissipation and voltage stress across the DCCB. Therefore, the use of a fault current limiter is essential, and the superconducting fault current limiter (SFCL) is the most promising choice. Past literature has focused on the operating characteristics of DCCB or limiting characteristics of the SFCL. However, there is little understanding about the fault interruption and system recovery characteristics considering both DCCB and SFCL. In this paper, we have presented a comparative study on fault interruption and system recovery characteristics considering thre... [more]

Reservoirs are natural or artificial lakes used as a source of water supply for society daily applications. In addition, hydroelectric power plants produce electricity while water flows through the reservoir. However, reservoirs are limited natural resources since water levels vary according to annual rainfalls and other natural events, and consequently, the energy generation. Therefore, forecasting techniques are helpful to predict water level, and thus, electricity production. This paper examines state-of-the-art methods to predict the water level in Catalan reservoirs comparing two approaches: using the water level uniquely, uni-variant; and adding meteorological data, multi-variant. With respect to relating works, our contribution includes a longer times series prediction keeping a high precision. The results return that combining Support Vector Machine and the multi-variant approach provides the highest precision with an R 2 value of 0.99.

Measurement-based technology has been developed in the area of power transmission systems with phasor measurement units (PMU). Using high-resolution PMU data, the oscillatory behavior of power systems from general electromagnetic oscillations to sub-synchronous resonances can be observed. Studying oscillations in power systems is important to obtain information about the orbital stability of the system. Floquet multipliers calculation is based on a mathematical model to determine the orbital stability of a system with the existence of stable or unstable periodic solutions. In this paper, we have developed a model-free method to estimate Floquet multipliers using time series data. A comparative study between calculated and estimated Floquet multipliers has been performed to validate the proposed method. The results are provided for a sample three-bus power system network and the system integrated with a doubly fed induction generator.