The exploitation of distributed renewable energy sources leads to a low-carbon energy transition, mainly based on the optimal integration of hydro, PV and wind power plants with the remaining high-performance fossil-fuel power stations. In the last twenty years, European Union (EU) countries have shown a significant increase of the power installed in new PV and wind power plants, together with the refurbishment of small and medium size hydro stations. In particular, in Italy, PV and wind energy production has strongly increased and nowadays there are regions characterized by a very green energy mix. In this new scenario, energy storage becomes a viable solution to mitigate the variability of renewable energy sources thus optimizing the network operation. The present paper is focused on the Liguria region, in the North of Italy and in particular on the Bormida Valley where nowadays more than the half of the annual electricity consumption is covered by the renewable energy local producti... [more]

The analyzed research issue provides a model for Carbon Footprint estimation at an early design stage. In the context of climate neutrality, it is important to introduce regenerative design practices in the architect’s design process, especially in early design phases when the possibility of modifying the design is usually high. The research method was based on separate consecutive research works−partial tasks: Developing regenerative design guidelines for simulation purposes and for parametric modeling; generating a training set and a testing set of building designs with calculated total Carbon Footprint; using the pre-generated set to train a Machine Learning Model; applying the Machine Learning Model to predict optimal building features; prototyping an application for a quick estimation of the Total Carbon Footprint in the case of other projects in early design phases; updating the prototyped application with additional features; urban layout analysis; preparing a new approach based... [more]

Power plants based on organic Rankine cycle (ORC) are known for their capacity in converting low and medium-temperature energy sources to electricity. To find the optimal operating conditions, a designer must evaluate the ORC from different perspectives including thermodynamic performance, technological limits, economic viability, and environmental impact. A popular approach to include different criteria simultaneously is to formulate a bi-objective optimization problem. This type of multi-objective optimization (MOO) allows for finding a set of optimal design points by defining two different objectives. Once the optimization is completed, the decision-making analysis shall be carried out to identify the final design solution. This study aims to develop a decision-making tool for facilitating the choice of the optimal design point. The proposed procedure is coded in MATLAB based on the commonly used Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). By providing t... [more]

The present study develops a novel optimization method for designing a Stirling engine by combining a variable-step simplified conjugate gradient method (VSCGM) and a neural network training algorithm. As compared with existing gradient-based methods, like the conjugate gradient method (CGM) and simplified conjugate gradient method (SCGM), the VSCGM method is a further modified version presented in this study which allows the convergence speed to be greatly accelerated while the form of the objective function can still be defined flexibly. Through the automatic adjustment of the variable step size, the optimal design is reached more efficiently and accurately. Therefore, the VSCGM appears to be a potential and alternative tool in a variety of engineering applications. In this study, optimization of a low-temperature-differential gamma-type Stirling engine was attempted as a test case. The optimizer was trained by the neural network algorithm based on the training data provided from thr... [more]

The objective of this study is to investigate the performance characteristics of a small-sized R600a household refrigeration system that adopts a condenser outlet split (COS) ejector cycle under various operating and ejector geometry conditions. The coefficient of performance and pressure lifting ratio of the COS ejector cycle were analyzed and measured by varying the entrainment ratio, compressor speed, and nozzle exit position. The optimum nozzle exit position in the COS ejector cycle adopted to achieve the maximum cycle performance was proposed as a function of the compressor speed and entrainment ratio. The optimum nozzle exit position was 0 mm when the entrainment ratio and compressor speed were low, and it increased as the entrainment ratio and compressor speed increased owing to the associated internal pressure drop in the suction section.

E-Mobility deployment has attained increased interest during recent years in various countries all over the world. This interest has focused mainly on reducing the reliance on fossil fuel-based means of transportation and decreasing the harmful emissions produced from this sector. To secure the electricity required to satisfy Electric Vehicles’ (EVs’) charging needs without expanding or overloading the existing electricity infrastructure, stand-alone charging stations powered by renewable sources are considered as a reasonable solution. This paper investigates the simulation of the optimal energy management of a proposed grid-independent, multi-generation, fast-charging station in the State of Qatar, which comprises hybrid wind, solar and biofuel systems along with ammonia, hydrogen and battery storage units. The study aims to assess the optimal sizing of the solar, wind and biofuel units to be incorporated in the design along with the optimal ammonia, hydrogen and battery storage capa... [more]

Synthetic natural gas (SNG) production from coal is one of the well-matured options to make clean utilization of coal a reality. For the ease of transportation and supply, liquefaction of SNG is highly desirable. In the liquefaction of SNG, efficient removal of low boiling point impurities such as hydrogen (H2) and nitrogen (N2) is highly desirable to lower the power of the liquefaction process. Among several separation processes, membrane-based separation exhibits the potential for the separation of low boiling point impurities at low power consumption as compared to the existing separation processes. In this study, the membrane unit was used to simulate the membrane module by using Aspen HYSYS V10 (Version 10, AspenTech, Bedford, MA, United States). The two-stage and two-step system designs of the N2-selective membrane are utilized for SNG separation. The two-stage membrane process feasibly recovers methane (CH4) at more than 95% (by mol) recovery with a H2 composition of ≤0.05% by m... [more]

The increased integration of Electric Vehicles (EVs) into the distribution network can create severe issues—especially when demand response programs and time-varying electricity prices are applied, EVs tend to charge during the off-peak time to minimize the electricity cost. Hence, another peak demand might be created, and other solutions are required. Many researchers tried to solve the problem; however, limitations exist because of the decentralized topology of the network. The system operator is not allowed to control the end-users’ load due to security and privacy issues. To overcome this situation, we propose a novel data-energy management algorithm on the transformer’s level that controls the power demand profiles of the householders and exchange energy between them without violating their privacy and security. Our method is compared to an existing one in the literature based on a decentralized control strategy. Simulations show that our approach has reduced the electricity cost... [more]

A significant growth in PV (photovoltaic) system installations have been observed during the last decade. The PV array has a nonlinear output characteristic because of weather intermittency. Partial shading is an environmental phenomenon that causes multiple peaks in the power curve and has a negative effect on the efficiency of the conventional maximum power point tracking (MPPT) methods. This tends to have a substantial effect on the overall performance of the PV system. Therefore, to enhance the performance of the PV system under shading conditions, the global MPPT technique is mandatory to force the PV system to operate close to the global maximum. In this paper, for the first time, a stochastic fractal search (SFS) optimization algorithm is applied to solve the dilemma of tracking the global power of PV system based triple-junction solar cells under shading conditions. SFS has been nominated because it can converge to the best solution at a fast rate. Moreover, balance between exp... [more]

The combination of the turning and burnishing process is an efficient approach to improve machined quality and productivity. This paper aims to optimize energy efficiency (EF), improved hardness ratio (IHR), and decreased roughness ratio (DRR) of a new hybrid turning-burnishing process. The machining parameters are the feed rate (f), turning speed (v), depth of cut (a), burnishing pressure (p), and the diameter of the compressing ball (d). A new turning-burnishing tool using compressed air has been designed and fabricated. A set of experiments for Aluminum Alloy 5083 were performed using the Taguchi method. The weightage principal component analysis (WPCA) and Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) were applied to obtain the weight values and optimal outcomes. The results indicated that optimum values of the depth of cut, pressure, diameter, feed rate, and speed are 1.00 mm, 0.4 MPa, 16.00 mm, 0.084 mm/rev, and 120 m/min, respectively. The improvemen... [more]

Cold-storage containers are widely used in cold-chain logistics transportation due to their energy saving, environmental protection, and low operating cost. The uniformity of temperature distribution is significant in agricultural-product storage and transportation. This paper explored temperature distribution in the container by numerical simulation, which included ventilation velocity and the fan location. Numerical model/numerical simulation showed good agreement with experimental data in terms of temporal and spatial air temperature distribution. Results showed that the cooling rate improved as velocity increased, and temperature at 45 min was the lowest, when velocity was 16 m/s. Temperature-distribution uniformity in the compartment became worse with the increase in ventilation velocity, but its lowest temperature decreased with a velocity increase. With regard to fan energy consumption, the cooling rate of the cooling module, and temperature-field distribution in the product are... [more]

We present a novel methodology for the control of power unit commitment in complex ship energy systems. The usage of this method is demonstrated with a case study, where measured data was used from a cruise ship operating in the Caribbean and the Mediterranean. The ship’s energy system is conceptualized to feature a fuel cell and a battery along standard diesel generating sets for the purpose of reducing local emissions near coasts. The developed method is formulated as a model predictive control (MPC) problem, where a novel 2-stage predictive model is used to predict power demand, and a mixed-integer linear programming (MILP) model is used to solve unit commitment according to the prediction. The performance of the methodology is compared to fully optimal control, which was simulated by optimizing unit commitment for entire measured power demand profiles of trips. As a result, it can be stated that the developed methodology achieves close to optimal unit commitment control for the con... [more]

The objective of this editorial is to overview the content of the special issue “Machine Learning for Energy Systems”. This special issue collects innovative contributions addressing the top challenges in energy systems development, including electric power systems, heating and cooling systems, and gas transportation systems. The special attention is paid to the non-standard mathematical methods integrating data-driven black box dynamical models with classic mathematical and mechanical models. The general motivation of this special issue is driven by the considerable interest in the rethinking and improvement of energy systems due to the progress in heterogeneous data acquisition, data fusion, numerical methods, machine learning, and high-performance computing. The editor of this special issue has made an attempt to publish a book containing original contributions addressing theory and various applications of machine learning in energy systems’ operation, monitoring, and design. The re... [more]

Decarbonization of marine transport is a key global issue, with the carbon emissions of international shipping projected to increase 23% to 1090 million tonnes by 2035 in comparison to 2015 levels. Optimization of the energy system (especially propulsion system) in these vessels is a complex multi-objective challenge involving economical maintenance, environmental metrics, and energy demand requirements. In this paper, data from instrumented vessels on the River Thames in London, which includes environmental emissions, power demands, journey patterns, and variance in operational patterns from the captain(s) and loading (passenger numbers), is integrated and analyzed through automatic, multi-objective global optimization to create an optimal hybrid propulsion configuration for a hybrid vessel. We propose and analyze a number of computational techniques, both for monitoring and remaining useful lifetime (RUL) estimation of individual energy assets, as well as modeling and optimization of... [more]

The United States Air Force has implemented a dispersed air base strategy to enhance mission effectiveness for near-peer conflicts. Asset dispersal places many smaller bases across a wide geographic area, which increases resupply requirements and logistical complexity. Hybrid energy systems reduce resupply requirements through sustainable, off-grid energy production. This paper presents a novel hybrid energy renewable delivery system (HERDS) model capable of (1) selecting the optimal hybrid energy system design that meets demand at the lowest net present cost and (2) optimizing the delivery of the selected system using existing Air Force cargo aircraft. The novelty of the model’s capabilities is displayed using Clark Air Base, Philippines as a case study. The HERDS model selected an optimal configuration consisting of a 676-kW photovoltaic array, an 1846-kWh battery system, and a 200-kW generator. This hybrid energy system predicts a 54% reduction in cost and an 88% reduction in fuel u... [more]

Nowadays, ancillary services (ASs) are usually provided by large power generating units located in transmission networks, while smaller assets connected to distribution systems remain passive. It is expected that active distribution systems will start to play an important role due to numerous issues related to power system operation caused mainly by developing renewable generation and restrictions imposed on conventional power generating units by climate policies. The future development of the power system management will also lead to the establishment of new market agents such as distributed resource aggregators (DRAs). The article presents the concept of the DRA as part of an active distribution system enabling small resources to participate in wholesale markets, provide ASs and indicates the functions of the DRA coordinator in the modern power system. The proposed method of the DRA structure modelling with the use of the mixed-integer linear programming (MILP) is aimed at evaluating... [more]

A simple yet effective optimization technique is developed to solve nonlinear conjugate heat transfer. The proposed Nonlinear Optimization with Replacement Strategy (NORS) is a mutation of several existing optimization processes. With the improvements of 3D metal printing of turbine components, it is feasible to have film holes with unconventional diameters, as these holes are created while printing the component. This paper seeks to optimize each film hole diameter at the leading edge of a turbine vane to satisfy several optimum thermal design objectives with given design constraints. The design technique developed uses linear regression-based machine learning model and further optimizes with strategic improvement of the training dataset. Optimization needs cost and benefit criteria are used to base its decision of success, and cost is minimized with maximum benefit within given constraints. This study minimizes the coolant flow (cost) while satisfying the constraints on average metal... [more]

It is well known that nowadays a significant part of the total energy consumption is related to buildings, so research for improving building energy efficiency is very important. This paper presents our investigations about the dimensioning of horizontal overhangs in order to determine the minimum annual consumption of building primary energy for heating, cooling and lighting. In this investigation, embodied energy for horizontal roof overhangs was taken into account. The annual simulation was carried out for a residential building located in the city of Belgrade (Serbia). Horizontal overhangs (roof and balcony) are positioned to provide shading of all exterior of the building. The building is simulated in the EnergyPlus software environment. The optimization of the overhang size was performed by using the Hooke Jeeves algorithm and plug-in GenOpt program. The objective function minimizes the annual consumption of primary energy for heating, cooling and lighting of the building and ene... [more]

The recuperation of otherwise lost waste heat provides a formidable way to decrease the primary energy consumption of many technical systems. A possible route to achieve that goal is through the use of Stirling engines, which have shown to be reliable and efficient devices. One can increase their performance by optimizing the piston motion. Here, it is investigated to which extent the cycle averaged power output can be increased by using a special class of adjustable sinusoidal motions (the AS class). In particular the influence of the regeneration effectiveness on the piston motion is examined. It turns out that with the optimized piston motion one can achieve performance gains for the power output of up to 50% depending on the loss mechanisms involved. A remarkable result is that the power output does not depend strongly on the limitations of the regenerator, in fact—depending on the loss terms—the influence of the regenerator practically vanishes.

Mixed Integer Linear Programming (MILP) optimization algorithms provide accurate and clear solutions for Microgrid and Distributed Energy Resources projects. Full-scale optimization approaches optimize all time-steps of data sets (e.g., 8760 time-step and higher resolutions), incurring extreme and unpredictable run-times, often prohibiting such approaches for effective Microgrid designs. To reduce run-times down-sampling approaches exist. Given that the literature evaluates the full-scale and down-sampling approaches only for limited numbers of case studies, there is a lack of a more comprehensive study involving multiple Microgrids. This paper closes this gap by comparing results and run-times of a full-scale 8760 h time-series MILP to a peak preserving day-type MILP for 13 real Microgrid projects. The day-type approach reduces the computational time between 85% and almost 100% (from 2 h computational time to less than 1 min). At the same time the day-type approach keeps the objective... [more]

As the use of sewage sludge as a fertilizer in agriculture is increasingly restricted in the European Union, other ways to utilize this waste stream need to be developed. Sewage sludge is an ideal input material for the process of hydrothermal carbonization, as it can convert wet biomass into a solid energy carrier with increased mechanical dewaterability. Digested sewage sludge was hydrothermally carbonized at 160−200 °C for 30−60 min with initial pH levels of 1.93−8.08 to determine optimal reaction conditions for enhanced dewaterability and phosphorus release into the liquid phase. Design of experiments was used to develop response surface models, which can be applied to optimize the process conditions. For optimal dewaterability and phosphorus release, low initial pH values (pH 1.93) and mild temperatures around 170 °C are favorable. Because holding time had no statistically relevant effect, a dependency of reaction time was investigated. Though it did not yield substantially differ... [more]

This research work proposed a hybrid model to maximize energy consumption and maximize user comfort in residential buildings. The proposed model consists of two widely used optimization algorithms named the firefly algorithm (FA) and genetic algorithm (GA). The hybridization of two optimization approaches results in a better optimization process, leading to better performance of the process in terms of minimum power consumption and maximum occupant’s comfort. The inputs of the optimization model are illumination, temperature, and air quality from the user, in addition with the external environment. The outputs of the proposed model are the optimized values of illumination, temperature, and air quality, which are, in turn, used in computing the values of user comfort. After the computation of the comfort index, these values enter the fuzzy controllers, which are used to adjust the cooling/heating system, illumination system, and ventilation system according to the occupant’s requirement... [more]

A complete analysis of the ac output current ripple in four-leg voltage source inverters considering multiple modulation schemes is provided. In detail, current ripple envelopes and peak-to-peak profiles have been determined in the whole fundamental period and a comprehensive method providing the current ripple rms has been achieved, all of them as a function of the modulation index. These characteristics have been determined for both phase and neutral currents, considering the most popular common-mode injection schemes. Particular attention has been paid to the performance of discontinuous pulse width modulation (DPWM) methods, including DPWMMAX and DPWMMIN, and their four most popular combinations DPWM0, DPWM1, DPWM2, and DPWM3. Furthermore, a comparison with a few continuous techniques (sinusoidal, centered pulse width modulations, and third harmonic injection) has been provided as well. Moreover, the average switching frequency and switching losses are analyzed, determining which P... [more]

A key challenge for future energy systems is how to minimize the effects of employing demand response (DR) programs on the consumer. There exists a diverse range of consumers with a variety of types of loads, such as must-run loads, and this can reduce the impact of consumer participation in DR programs. Multi-energy systems (MES) can solve this issue and have the capability to reduce any discomfort faced by all types of consumers who are willing to participate in the DRPs. In this paper, the most recent implementations of DR frameworks in the MESs are comprehensively reviewed. The DR modelling approach in such energy systems is investigated and the main contributions of each of these works are included. Notably, the amount of research in MES has rapidly increased in recent years. The majority of the reviewed works consider power, heat and gas systems within the MES. Over three-quarters of the papers investigated consider some form of energy storage system, which shows how important ha... [more]

Smart grid (SG) is a next-generation grid which is responsible for changing the lifestyle of modern society. It avoids the shortcomings of traditional grids by incorporating new technologies in the existing grids. In this paper, we have presented SG in detail with its features, advantages, and architecture. The demand side management techniques used in smart grid are also presented. With the wide usage of domestic appliances in homes, the residential users need to optimize the appliance scheduling strategies. These strategies require the consumer’s flexibility and awareness. Optimization of the power demand for home appliances is a challenge faced by both utility and consumers, particularly during peak hours when the consumption of electricity is on the higher side. Therefore, utility companies have introduced various time-varying incentives and dynamic pricing schemes that provides different rates of electricity at different times depending on consumption. The residential appliance sc... [more]