The best pricing method for any company in a perfectly competitive market is the pricing scheme with regards to the marginal cost. In contrast to this environment, there is a market with imperfect competition. In this market, the price can be affected by some players in the generation/demand side (i.e., suppliers and/or buyers). In the economic literature, “market power” refers to a company that has the power to affect prices. In fact, market power is often defined as the ability to divert prices from competitive levels. In the electricity market, especially because of the integration of intermittent renewable energy resources (RESs) along with the inflexibility of demand, there are levels of market power on the supply side. Hence, implementation of demand response (DR) programs is necessary to increase the flexibility of the demand side to deal with the intermittency of renewable generations and at the same time tackle the market power of the supply side. This paper uses economic theo... [more]

Process industries include chemicals, petrochemicals, pulp and paper, steel, minerals, food, and power generation industries. Although diverse, all of these share common dynamics in terms of continuous variables and rely on the same measurements, e.g., level, flow, temperature, and pressure. They also have common actuators, such as valves and pumps. Additionally, they have variable time delays from process dynamics, such as mixing effects, measurement lines, or wireless data communication protocols. Processes with variable time delay can often lead to poor performance and instability. This paper proposes a fractional-order (FO) control design with adaptive laws for dealing with such processes, and a comparison is analysed against other controllers established in the literature for delayed dynamics. Two examples are presented to illustrate the advantages of the proposed approach. A real time-embedded control setup and interface to industrial standard devices is tested to illustrate the... [more]

Drill cuttings, contaminated with drilling fluids, are characterized by their high moisture content, which can cause problems for collection, storage, and transportation. Additionally, the practice of disposing waste with high moisture content into sanitary landfills is undesirable and mostly forbidden. For that reason, drying of waste with high moisture content, such as drill cuttings, is an essential operation. In this work, microwave and conveyor belt drying processes for drying drill cuttings containing water-based drilling fluids were examined in a lab-scale study. The results of the study indicated that the microwave dryer has been shown to be advantageous in terms of time and energy consumption for drying of thin film layers, while the conveyor drying system was more appropriate for bulk drying.

Traditional industries span multiple sectors, such as coal, iron and steel, textile, machinery, chemical engineering, shipbuilding, and construction materials [...]

A microwave irradiation probe was newly developed for downsizing microwave applicators and the overall microwave heating apparatus. The key component of the proposed probe is a tapered section composed of polytetrafluoroethylene (PTFE) and alumina. Insertion of the tapered section between the input port and the applicator vessel realizes impedance matching to the microwave power source and reduces the reflected power from the applicator. The proposed microwave probe for a cylindrical applicator was designed using 3D electromagnetic simulations. The permittivity data of two liquid samples—ultrapure water and 2 M NaOH solution—were measured and taken into simulations. The conductivity of the NaOH solution was estimated from the measurement results. The measured reflection ratio of the fabricated applicator was in good accordance with the simulated one. The frequency ranges in which the measured reflection ratio was less than 10% were from 1.45 GHz to 2.7 GHz when using water and from 1.6... [more]

Energy is one of the valuable resources in this biosphere. However, with the rapid increase of the population and increasing dependency on the daily use of energy due to smart technologies and the Internet of Things (IoT), the existing resources are becoming scarce. Therefore, to have an optimum usage of the existing energy resources on the consumer side, new techniques and algorithms are being discovered and used in the energy optimization process in the smart grid (SG). In SG, because of the possibility of bi-directional power flow and communication between the utility and consumers, an active and optimized energy scheduling technique is essential, which minimizes the end-user electricity bill, reduces the peak-to-average power ratio (PAR) and reduces the frequency of interruptions. Because of the varying nature of the power consumption patterns of consumers, optimized scheduling of energy consumption is a challenging task. For the maximum benefit of both the utility and consumers, t... [more]

In this study, Ni, Co and Ni−Co catalysts supported on binary oxide ZrO2−Al2O3 were synthesized by sol-gel method and characterized by means of various analytical techniques such as XRD, BET, TPR, TPD, TGA, SEM, and TEM. This catalytic system was then tested for syngas respective H2 production via partial oxidation of methane at 700 °C and 800 °C. The influence of calcination temperatures was studied and their impact on catalytic activity and stability was evaluated. It was observed that increasing the calcination temperature from 550 °C to 800 °C and addition of ZrO2 to Al2O3 enhances Ni metal-support interaction. This increases the catalytic activity and sintering resistance. Furthermore, ZrO2 provides higher oxygen storage capacity and stronger Lewis basicity which contributed to coke suppression, eventually leading to a more stable catalyst. It was also observed that, contrary to bimetallic catalysts, monometallic catalysts exhibit higher activity with higher calcination temperatur... [more]

The substitution of petroleum-based synthetic polymers in latex formulations with sustainable and/or bio-based sources has increasingly been a focus of both academic and industrial research. Emulsion polymerization already provides a more sustainable way to produce polymers for coatings and adhesives, because it is a water-based process. It can be made even more attractive as a green alternative with the addition of starch, a renewable material that has proven to be extremely useful as a filler, stabilizer, property modifier and macromer. This work provides a critical review of attempts to modify and incorporate various types of starch in emulsion polymerizations. This review focusses on the method of initiation, grafting mechanisms, starch feeding strategies and the characterization methods. It provides a needed guide for those looking to modify starch in an emulsion polymerization to achieve a target grafting performance or to incorporate starch in latex formulations for the replacem... [more]

Air-core-liquid-ring (ACLR) atomizers present a specific type of internal mixing pneumatic atomizers, which can be used for efficient atomization of high viscous liquids. Generally, atomization efficiency is considered as a correlation between energy input and resulting droplet size. In pneumatic atomization, air-to-liquid ratio by mass (ALR) is commonly used as reference parameter of energy input. However, the pressure energy of the atomization gas is not considered in the calculation of ALR. In internal mixing ACLR atomizers, it can be assumed that this energy contributes to liquid disintegration by expansion of the gas core after exiting the atomizer. This leads to the hypothesis that droplet sizes decrease with increasing gas pressure at constant ALR. Therefore, the use of volumetric energy density (EV) as a reference parameter of energy input was investigated at different gas pressures between 0.4 and 0.8 MPa. Furthermore, scale up-related influences on the atomization efficiency... [more]

In today’s world of environmental strain, wastewater treatment has become a, more or less, conventional application of flotation—as for instance, in the oil, food, or chemical industries, and in potable water treatment. In this paper, different flotation methods (such as ion, adsorbing colloid, and adsorptive flotation, including biosorption) and techniques will be reviewed; and, in order to explain them further, several applications of these from the laboratory (General and Inorganic Chemical Technology) at Aristotle University of Thessaloniki, Greece (AUTh) will be presented and analyzed, with the main focus on sustainability. The application of flotation as a separation process, when applied in pollution control or during water treatment, was often criticized due to the possible toxicity of the applied collectors; however, the use of biosurfactants may alleviate this concern and enhance its further acceptability.

Sweet sorghum juice, a potential bioethanol feedstock, can be incorporated into the dry-grind ethanol process to improve sugar utilization efficiency, thereby enhancing ethanol yields. The juice is normally obtained by pressing the stalk through roller mills in tandem. Juice extraction by this process is known to be labor intensive, less efficient, and susceptible to considerable fermentable sugar loss due to microbial activities when stored at room temperature. Sweet sorghum juice extraction via diffusion has recently been proposed to improve sugar recovery efficiency. In this study, extraction kinetics based on the optimized diffusion parameters (8% grain loading, 85 °C, and 120 min) were determined to describe the mass transfer of sugars in sweet sorghum biomass during the diffusion process. Diffusion parameters obtained from previous studies were used to extract free sugars and convert them into ethanol using granular starch hydrolyzing enzymes (GSHE) and traditional enzymes. Ethan... [more]

The current research presents an experimental approach on the mechanism, kinetic and decay of industrial Pd-Ag supported α-Al2O3 catalyst used in the acetylene hydrogenation process. In the first step, the fresh and deactivated hydrogenation catalysts are characterized by XRD, BET (Brunauer−Emmett−Teller), SEM, TEM, and DTG analyses. The XRD results show that the dispersed palladium particles on the support surface experience an agglomeration during the reaction run time and mean particle size approaches from 6.2 nm to 11.5 nm. In the second step, the performance of Pd-Ag supported α-Al2O3 catalyst is investigated in a differential reactor in a wide range of hydrogen to acetylene ratio, temperature, gas hourly space velocity and pressure. The full factorial design method is used to determine the experiments. Based on the experimental results ethylene, ethane, butene, and 1,3-butadiene are produced through the acetylene hydrogenation. In the third step, a detailed reaction network is pr... [more]

A new improved formulation was studied to improve the rehydration properties of freeze-dried dumplings. To provide basic data for industrial applications, the solubility capabilities of β-Cyclodextrin in sucrose, NaCl, and a mixed solution were measured at temperatures ranging from 303.15 to 353.15 K using a laser monitoring method. The experimental values indicated that the solubility of β-Cyclodextrin in solvents increased with increasing temperature. The simplified Apelblat model, Apelblat model, and λh model were employed to analyze the experimental results using correlation tests. The relative average deviation (RAD) values between the experimental and calculated values were less than 0.095, 0.075, and 0.103 for the simplified Apelblat equation, Apelblat equation, and λh equation, respectively. Apparent thermodynamic analysis of β-Cyclodextrin dissolution was also performed at the mean temperature using the model parameters of Apelblat equation. Furthermore, thermodynamic properti... [more]

In this article, electrical characteristics of a high-power inductively-coupled plasma (ICP) torch operating at 3 MHz are determined by direct measurement of radio-frequency (RF) current and voltage together with energy balance in the system. The variation of impedance with two parameters, namely the input power and the sheath gas flow rate for a 50 kW ICP is studied. The ICP torch system is operated at near atmospheric pressure with argon as plasma gas. It is observed that the plasma resistance increases with an increase in the RF-power. Further, the torch inductance decreases with an increase in the RF-power. In addition, plasma resistance and torch inductance decrease with an increase in the sheath gas flow rate. The oscillator efficiency of the ICP system ranges from 40% to 80% with the variation of the Direct current (DC) powers. ICP has also been numerically simulated using Computational Fluid Dynamics (CFD) to predict the impedance profile. A good agreement was found between the... [more]

A method of directly computing the average behavior of stochastic populations is established, which obviates the time-consuming process of generating detailed sample paths. The method relies on suitably discretized time intervals in which nonlinearities are quasi-linearized to produce random variables with known expectations and variances. The pair of equations is directly solved to obtain the average behavior of the system at the end of a time interval based on its knowledge at the beginning of the interval. The sample path requirement for this process is considerably lower than that for the process over the entire simulation period. The efficiency of the method is demonstrated on the transfer of antibiotics resistance between two bacterial species which is a problem of mounting concern in fighting disease.

Diabetic kidney disease (DKD) is a major cause of renal failure. Podocytes are terminally differentiated renal epithelial cells that are key targets of damage due to DKD. Podocytes express a glucose-stimulated local renin-angiotensin system (RAS) that produces angiotensin II (ANG II). Local RAS differs from systemic RAS, which has been studied widely. Hyperglycemia increases the production of ANG II by podocyte cells, leading to podocyte injury. Angiotensin-converting enzyme (ACE) is involved in the production of ANG II, and ACE inhibitors are drugs used to suppress elevated ANG II concentration. As systemic RAS differs from the local RAS in podocytes, ACE inhibitor drugs should act differently in local versus systemic contexts. Experimental and computational studies have considered the pharmacokinetics (PK) and pharmacodynamics (PD) of ACE inhibition of the systemic RAS. Here, a PK/PD model for ACE inhibition is developed for the local RAS in podocytes. The model takes constant or dyn... [more]

Small- and Medium-Scale Enterprises (SMEs) act as catalysts in the general economy with regard to their added value. Support programs have been designed by the government through the Small and Medium Enterprises Development and Support Administration KOSGEB) and other institutions in order to further the general economic contributions of such enterprises. However, there is no method for using support models according to a productivity and effectiveness principle. This causes serious wastes of both resources and time. In this study, the problem of applying support models to improve the most critical problems of SMEs was discussed. As a place of application, 82 firms registered to the Konya Chamber of Industry were selected for the automotive supplier industry. Firstly, a productivity evaluation of companies was performed by a data envelopment analysis (DEA). Firms were grouped into A, B1, B2, C1, and C2 according to their activity scores. Using an Analytical Hierarchy Process (AHP), the... [more]

The treatment of nitrate and phosphate ions in fresh water such as streams, rivers, lakes, reservoirs, and wetlands through biological treatment has been getting more crucial and popular in recent years. This paper reports the reduction of nitrate and phosphate ions in modified low salinity fresh water via the cultivation of a microalgae strain, e.g., Tetraspora sp. and Spirogyra sp. The low salinity fresh water (9054 to 9992 ppm) was modified with the addition of organic fertiliser (VermiCompost Tea) and used as the cultivation medium to grow microalgae. The microalgae strains were grown under controlled conditions in an indoor laboratory for 14 days. The initial concentrations of nitrate and phosphate ions in the modified fresh water sample were 1.17 mg/L and 0.10 mg/L, respectively. The reduction of nitrate and phosphate ions associated with the effect of cultivation of Tetraspora sp. and Spirogyra sp. in ambient air (0.03% of CO2) and 15% of CO2 was investigated. In ambient air, th... [more]

Mixed ionic-electronic conducting membranes have seen significant progress over the last 25 years as efficient ways to obtain oxygen separation from air and for their integration in chemical production systems where pure oxygen in small amounts is needed. Perovskite materials are the most employed materials for membrane preparation. However, they have poor phase stability and are prone to poisoning when subjected to CO2 and SO2, which limits their industrial application. To solve this, the so-called dual-phase membranes are attracting greater attention. In this review, recent advances on self-supported and supported oxygen membranes and factors that affect the oxygen permeation and membrane stability are presented. Possible ways for further improvements that can be pursued to increase the oxygen permeation rate are also indicated. Lastly, an overview of the most relevant examples of membrane reactors in which oxygen membranes have been integrated are provided.

The purpose of this study was to investigate how the properties of Mexican kefir grains (MKG) are affected by the operating parameters used in the freeze-drying process. The factors investigated were the freezing time (3−9 h), freezing temperature (−20 to −80 °C), pressure (0.2−0.8 mbar), and lyophilization time (5−20 h). The maximum range of change and one-way analysis of variance showed that lyophilization time and freezing time significant affects (p < 0.05) the response variables, residual moisture content and water activity, and pressure had a significant effect on the color difference and survival rate of probiotic microorganisms. The best drying conditions were a freezing time of 3 h, a freezing temperature of −20 °C, a pressure of 0.6 mbar, and a lyophilization time of 15 h. Under these conditions, we obtained a product with residual moisture content below 6%, water activity below 0.2, and survival rates above 8.5 log cfu per gram of lactic acid bacteria and above 8.6 log fo... [more]

Brewers’ spent grain (BSG) is the most abundant by-product of the brewing process. BSG is currently disposed of or used as a supplement for animal feed, although it contains significant amounts of bioactive compounds of great interest to the pharmaceutical, cosmetic and food sectors. In this study we investigate the feasibility of using a simple solvent extraction procedure to recover phenolic antioxidants from BSG. Acetone−water and ethanol−water mixtures were used as extraction solvents. Phenolic extracts obtained by treatment of BSG with the two solvent systems were characterized in terms of total phenolics and antioxidant activity. For both systems, the extraction yield was maximum at 60% (v/v) organic solvent concentration. At all solvent compositions, mixtures containing acetone provided higher extraction yields. As suggested by the strong correlation between the antioxidant activity of BSG extracts and their phenolic content, the antioxidant capacity of the extracts can be mainl... [more]

The high solubility of urea in water and its consequent leaching into the soil adversely prevents its full assimilation by plants. An improved slow-release process could effectively minimise the loss of fertilizer material and thus mitigate the associated environmental pollution. In this study, the effects of the operational variables on the efficiency of the urea coating process in a rotary pan have been systematically analysed. A mixture of gypsum-sulphur was used as the coating material with refined water as a binder. In order to comprehensively investigate the impact of each process variable on the efficiency and any potential interactions between them, the effects of particle size, coating material percentage, rotational speed of the pan, spray flow rate and the amount of sprayed water were investigated and analysed via a central composite design of experiments (DoE). The second-order polynomial model provided the best correlation for the experimental data. The predictive model wa... [more]

Gas turbines are widely used all over the world, in order to ensure the normal operation of gas turbines, it is necessary to monitor the condition of gas turbine and analyze the tested parameters to find the state information contained in parameters. There is a problem in gas turbine condition monitoring that how to locate the fault accurately if failure occurs. To solve the problem, this paper proposes a method to locate the fault of gas turbine components by evaluating the sensitivity of tested parameters to fault. Firstly, the tested parameters are decomposed by the kernel principal component analysis. Then construct the statistics of T2 and SPE in the principal elements space and residual space, respectively. Furthermore, the thresholds of the statistics must be calculated. The influence of tested parameters on faults is analyzed, and the degree of influence is quantified. The fault location can be realized according to the analysis results. The research results show that the propo... [more]

Hospital wastewater contains pharmaceutical residues, chemicals, and pathogens that cause coloration and nourish pathogenic microorganisms. The objective of the study was to evaluate the effectiveness of a medical wastewater treatment system at Military Hospital 175 (Ho Chi Minh City, Vietnam) that combined a membrane bioreactor (MBR) system with nanofiltration (NF). The influent of the system was the wastewater discharged from the operating rooms of the hospital. The system has a capacity of 50 L/day and operates at three organic load rates (OLR) of 0.5, 1.5 and 2.5 kgCOD/m3day (COD: Chemical oxygen demand), in which each load rate operates for 40 days. The results showed that most nutritional criteria generally achieved positive results. Specifically, the average COD removal was shown to be consistently high throughout the three phases at 94%, 93.3%, and 92.7%, respectively. For removal of nitrogen, the system demonstrated efficiencies of 75%, 79%, and 83%, respectively, to three pha... [more]

Viscose, a cellulose-based commodity fibre, is produced by pulping and bleaching of wood, yielding a high quality “dissolving pulp” which is then spun. During pulping and bleaching, effective hemicellulose extraction is required to allow fibre production. We present a design of experiments (DoE) approach to optimise caustic extraction in a total chlorine free (TCF) bleaching sequence (O-CE-Z-P) of beech wood sulphite pulp. Temperature and sodium hydroxide concentration were varied to identify highest xylan extraction yield, and a maximum xylan removal of 83% was achieved at 20 °C and 120 g/L NaOH. Additionally, caustic extraction conditions were derived from the DoE model that led to pulps with high yield, high alpha cellulose content or uniform cellulose molecular weight distribution. Pulps from verification experiments exhibited good reactivity in viscose application tests. Hence, the presented O-CE-Z-P bleaching sequence can be considered as suitable for integrated viscose fibre pro... [more]