The COVID-19 pandemic has impacted electricity consumption patterns and such an impact cannot be analyzed by simple data analytics. In China, specifically, city lock-down policies lasted for only a few weeks and the spread of COVID-19 was quickly under control. This has made it challenging to analyze the hidden impact of COVID-19 on electricity consumption. This paper targets the electricity consumption of a group of regions in China and proposes a new clustering-based method to quantitatively investigate the impact of COVID-19 on the industrial-driven electricity consumption pattern. This method performs K-means clustering on time-series electricity consumption data of multiple regions and uses quantitative metrics, including clustering evaluation metrics and dynamic time warping, to quantify the impact and pattern changes. The proposed method is applied to the two-year daily electricity consumption data of 87 regions of Zhejiang province, China, and quantitively confirms COVID-19 has... [more]

As low-cost, widely distributed and easily accessible renewable clean energy, solar energy has attracted more and more attention. Direct absorption solar collectors can convert solar energy into heat, but their efficiency is closely related to the absorption performance of the working fluid. In order to improve the absorption efficiency of direct absorption solar collectors, an experimental study on the selective absorption of solar energy by hybrid nanofluids was carried out. Five hybrid nanofluids were prepared and characterized, and the energy transfer advantages of hybrid nanofluid over single nanofluid were carefully studied. Experiments have found that the light-to-heat conversion properties of hybrid nanofluids show no obvious advantages or disadvantages compared with single nanofluid, and their performance is closely related to the types of nanoparticles. In addition, the hybrid nanofluid generally has two peaks, exactly the same as the single nanofluid in the mixed component,... [more]

As newly emerged 2D layered transition metal carbides or carbonitrides, MXenes have attracted growing attention in energy conversion and storage applications due to their exceptional high electronic conductivity, ample functional groups (e.g., -OH, -F, -O), desirable hydrophilicity, and superior dispersibility in aqueous solutions. The significant advantages of MXenes enable them to be intriguing structural units to engineer advanced MXene-based nanocomposites for electrochemical storage devices with remarkable performances. Herein, this review summarizes the current advances of MXene-based materials for energy storage (e.g., supercapacitors, lithium ion batteries, and zinc ion storage devices), in which the fabrication routes and the special functions of MXenes for electrode materials, conductive matrix, surface modification, heteroatom doping, crumpling, and protective layer to prevent dendrite growth are highlighted. Additionally, given that MXene are versatile for self-assembling i... [more]

In remote locations, it is advisable to combine solar water pumping with electric energy storage and power supply for other forms of consumption. In such complex systems, individual subsystems feature their own local control, and the general automatic control of the system in different modes of its operation is carried out in accordance with an energy management strategy (EMS). In this paper, the functions of local and general control of the solar water pumping system with battery storage and external power supply are combined in the system of passivity-based control (PBC). The EMS is constructed in such a way that for all modes, only two PBC systems are developed, which are switched depending on the battery’s state of charge and the current levels of the two main disturbances—solar irradiation and electrical consumption. For each system, two control influence former (CIF) structures were synthesized and their operation was investigated by computer simulation. Despite the simplicity of... [more]

Although steam methane reforming (CH4 + 2H2O → 4H2 + CO2) is the most commercialized process for producing hydrogen from methane, more than 10 kg of carbon dioxide is emitted to produce 1 kg of hydrogen. Methane pyrolysis (CH4 → 2H2 + C) has attracted much attention as an alternative to steam methane reforming because the co-product of hydrogen is solid carbon. In this study, the simultaneous production of hydrogen and separable solid carbon from methane was experimentally achieved in a bubble column filled with molten potassium chloride. The melt acted as a carbon-separating agent and as a pyrolytic catalyst, and enabled 40 h of continuous running without catalytic deactivation with an apparent activation energy of 277 kJ/mole. The resultant solid was purified by water washing or acid washing, or heating at high temperature to remove salt residues from the carbon. Heating the solid product at 1200 °C produced the highest purity carbon (97.2 at%). The economic feasibility of methane py... [more]

The negative environmental impact of cement production emphasizes the need to use alternative binders for construction materials. Alkali-activated slag is a more environmentally friendly candidate which can be utilized in the design of mortars with favorable material properties. However, the electrical properties of such materials are generally poor and need to be optimized by various metallic or carbon-based admixtures to gain new sophisticated material functions, such as self-sensing, self-heating, or energy harvesting. This paper investigates the influence of waste metal powder originating from the 3D printing process on the material properties of alkali-activated slag mortars. The untreated metal powder was characterized by means of XRD and SEM/EDS analyses revealing high nickel content, which was promising in terms of gaining self-heating function due to the high electrical conductivity and stability of nickel in a highly alkaline environment. The designed mortars with the waste m... [more]

This article presents the historical progression of changes and arguments indicating the need to move from fossil energy sources to the green economy in the European Union (EU) countries. It shows trends in the EU’s climate and energy policy compared to the rest of the world. At the same time, it points to the elements of the necessary compromise between the climate requirements and the energy security of countries and their economies. The aim of the article is to present the main quantitative challenges for the development of the green economy in the EU, which are analyzed from the perspective of the year 2030. For this year, specific values have been established to be achieved by European countries in several fundamental areas. On the other hand, the strategic goals and further development perspective are included until 2050. This undoubtedly indicates the complexity of the issue, which is intensified as a result of the various economic and political strategies of many European Union... [more]

The exploitations of deep-water wells often use directional well drilling to reach the target layer. Affected by special environments in deep water, the prediction of pressure loss of cement slurry is particularly important. This paper presents a prediction model of pressure loss suitable for deep-water directional wells. This model takes the complex interaction between the temperature, pressure and hydration kinetics of cement slurry into account. Based on the initial and boundary conditions, the finite difference method is used to discretize and calculate the model to ensure the stability and convergence of the result calculated by this model. Finally, the calculation equation of the model is used to predict the transient temperature and pressure loss of Wells X1 and X2, and a comparison is made between the predicted value and the monitoring data. The comparison results show that the maximum error between the temperature and pressure predicted by the model and the field measured valu... [more]

The subject of the article is a description of the operating principle of the new proposal of the selective circuit breaker, which is an extension of the existing selective devices. The solution proposed in the article allows one to increase the selectivity range of classic selective circuit breakers. In the case of networks with high values of short-circuit loop impedance, operating at reduced supply voltage, the proposed solution will not limit the short-circuit current too excessively as it is in the case of classic solutions. This advantage will allow for the correct reaction of the protections preceding them. The article presents the structure and analysis of the selection of parameters of the proposed solution. The results of simulation calculations have also been illustrated.

For fuel cell hybrid vehicles, the energy distribution mechanism of the fuel cell and power battery should reasonably allocate the power output of the fuel cell and power battery, optimize the efficiency of both and control the power battery SOC to fluctuate within a reasonable range. To test the energy flow and operation characteristics of the powertrain of two hybrid car models on the market, two test vehicles (called vehicle A and vehicle B in this paper) are tested on an AIP 4WD chassis dynamometer under constant power and the China Light-Duty Vehicle Test Cycle-Passenger cycle condition, respectively. The test results show that vehicle A has a smaller power battery SOC variation interval and a lower variable rate than vehicle B. The cumulative power battery output energy of vehicle B is more significant than that of vehicle A. More importantly, the current rare public test reports of fuel cell vehicles make this study very valuable. This paper has important reference significance... [more]

This work presents the results of research on the thermo-chemical conversion of woody biomass−pine wood coming from lodzkie voivodship forests and sewage sludge from the Group Sewage Treatment Plant of the Łódź Urban Agglomeration. Laboratory scale analyses of the carbonization process were carried out, initially using the TGA technique (to assess activation energy (EA)), followed by a flow reactor operating at temperature levels of 280−525 °C. Both the parameters of carbonized solid biofuel and biochar as a carrier for fertilizer (proximate and ultimate analysis) and the quality of the torgas (VOC) were analyzed. Analysis of the pine wood and sewage sludge torrefaction process shows clearly that the optimum process temperature would be around 325−350 °C from a mass loss ratio and economical perspective. This paper shows clearly that woody biomass, such as pine wood and sewage sludge, is a very interesting material both for biofuel production and in further processing for biochar produ... [more]

Energy is the main driver of human Social-Ecological System (SES) dynamics. Collective energy properties of human SES can be described applying the principles of statistical mechanics: (i) energy consumption repartition; (ii) efficiency; (iii) performance, as efficient power, in relation to the least-action principle. International Energy Agency data are analyzed through the lens of such principles. Declining physical efficiency and growth of power losses emerge from our analysis. Losses mainly depend on intermediate system outputs and non-energy final output. Energy performance at Country level also depends on efficient power consumption. Better and worse performing Countries are identified accordingly. Five policy-relevant areas are identified in relation to the physical principles introduced in this paper: Improve efficiency; Decouple economic growth from environmental degradation; Focus on high value added and labor-intensive sectors; Rationalize inefficient fossil fuel subsidies t... [more]

Kalman filter (KF) is often based on two models, which are phase angle vector (PAV) model and orthogonal vector (OV) model, in the application of distorted grid AC signal detection. However, these two models lack rigorous and detailed derivation from the principle of dynamic modeling. This paper presents a phase angle vector dynamic (PAVD) model and an orthogonal vector dynamic (OVD) model, which are combined with Kalman filter for detecting distorted grid AC signal. They reveal that the state noise covariance of the dynamic model−based KF is related to the sampling cycle, and overcome the defect of more detecting error for conventional model−based KF. Experiment and evaluation results show that the proposed KF algorithms are reasonable and effective. Therefore, this paper contributes a guiding significance for the application of KF algorithm in harmonic detection.

Smart transportation a smart city application where traditional individual models are transforming to shared and distributed ownership. These models are used to serve commuters for inter- and intra-city travel. However, short-range urban transportation services within campuses, residential compounds, and public parks are not explored to their full capacity compared to the distributed vehicle model. This paper aims to explore and design an adequate framework for battery-operated shared mobility within a large community for short-range travel. This work identifies the characteristics of the shared mobility for battery-operated vehicles and accordingly proposes an adequate solution that deals with real-time data collection, tracking, and automated decisions. Furthermore, given the requirement for real-time decisions with low latency for critical requests, the paper deploys the proposed framework within the 3-tier computing model, namely edge, fog, and cloud tiers. The solution design cons... [more]

The Internet of things (IoT) enables a diverse set of applications such as distribution automation, smart cities, wireless sensor networks, and advanced metering infrastructure (AMI). In smart grids (SGs), quality of service (QoS) and AMI traffic management need to be considered in the design of efficient AMI architectures. In this article, we propose a QoS-aware machine-learning-based framework for AMI applications in smart grids. Our proposed framework comprises a three-tier hierarchical architecture for AMI applications, a machine-learning-based hierarchical clustering approach, and a priority-based scheduling technique to ensure QoS in AMI applications in smart grids. We introduce a three-tier hierarchical architecture for AMI applications in smart grids to take advantage of IoT communication technologies and the cloud infrastructure. In this architecture, smart meters are deployed over a georeferenced area where the control center has remote access over the Internet to these netwo... [more]

Cruise ships are unfortunately at the infamous forefront of the means of maritime transport emitting the largest amounts of harmful substances into the atmosphere and aquatic environment. At the initiative of IMO and the European Union, formal restrictions were introduced regarding the level of harmful emissions on the high seas and in ports generated by seagoing vessels. To meet these challenges, shipowners have invested in various technological solutions on their ships to reduce the number of harmful emissions, and by ordering new vessels; they promote the use of pro-ecological solutions related to energy saving and eliminate environmental harm. However, despite the actions taken by shipowners, seaports unfortunately lag behind the challenges and expectations of the market and are still not prepared, for example, to power the ships moored in ports with shore-side energy to reduce the environmental pollution when the ships are at berth. The aim of this paper is to identify actions tak... [more]

Modern distance relays have integrated numerous protection functions, including power-swing blocking and out-of-step or pole-slip tripping functions. The main purpose of the power-swing blocking function is to differentiate faults from power swings and block distance or other relay elements from operating during stable or unstable power swings. Most power-swing blocking elements are based on traditional methods that monitor the positive sequence impedance rate. The required settings for the power-swing blocking elements could be difficult to calculate in many applications, particularly those where fast swings can be expected. For these cases, extensive stability studies are necessary to determine the fastest rate of possible power swings. This paper presents a detailed step-by-step method for settings calculation of out-of-step (OOS) protection, both blocking and tripping functions considering a generic two-source system. Then the method is applied to define the protection relay settin... [more]

Recently, to meet the growing demand for stable and flexible batteries, anodes in the form of thin films have drawn the attention of researchers. It is clear that mass production of such batteries would bring the worldwide distribution of flexible devices and wearable electronics closer. Currently, electrodes are deposited on a flexible substrate and consist of conductive and binding agents that increase the volume/weight of the electrode. Here, we propose free-standing and non-active-material-free thin films based on reduced graphene oxide (rGO), titanium dioxide (TiO2) and manganese dioxide (MnO2) as working electrodes in lithium-ion half-cells prepared via the vacuum-assisted filtration method. The electrochemical performance of the assembled half-cells exhibited good cyclic stability and a reversible capacity at lower current densities. The addition of TiO2 and MnO2 improved the capacity of the rGO film, while rGO itself provided a stable rate performance. rGO/TiO2/MnO2 film showed... [more]

This study investigated the effect of HCl in biomass gasification producer gas on the CO2 capture efficiency and contaminants removal efficiency by CaO-Fe2O3 based sorbent material in the calcium looping process. Experiments were conducted in a fixed bed reactor to capture CO2 from the producer gas with the combined contaminants of HCl at 200 ppmv, H2S at 230 ppmv, and NH3 at 2300 ppmv. The results show that with presence of HCl in the feeding gas, sorbent reactivity for CO2 capture and contaminants removal was enhanced. The maximum CO2 capture was achieved at carbonation temperatures of 680 °C, with efficiencies of 93%, 92%, and 87%, respectively, for three carbonation-calcination cycles. At this carbonation temperature, the average contaminant removal efficiencies were 92.7% for HCl, 99% for NH3, and 94.7% for H2S. The outlet contaminant concentrations during the calcination process were also examined which is useful for CO2 reuse. The pore structure change of the used sorbent materi... [more]

The ongoing climate changes necessitate an effective climate policy. The energy transition is now an important topic and problem, especially in Poland. (1) The undertaken analysis of the problem of energy transition is important for political, social and technological reasons. Political, because it shows the weakness of the implementation of Polish energy policy in regards to climate change. Social, because energy transition will bring about significant social changes in the largest industrial region of Poland. Technological, as the departure from fossil fuels requires the introduction of other sources of energy on a massive scale, for which Poland is not prepared. The aim of the study was to critically analyse the activities to date in the field of energy transition in Poland. The second goal of the analysis was an attempt to answer the question of whether the process of energy transition and achieving the goals set in the EU’s European Green Deal are possible at all until 2050. (2) T... [more]

Hydrogen as carbon-free fuel is a very promising candidate for climate-neutral internal combustion engine operation. In comparison to other renewable fuels, hydrogen does obviously not produce CO2 emissions. In this work, two concepts of hydrogen internal combustion engines (H2-ICEs) are investigated experimentally. One approach is the modification of a state-of-the-art gasoline passenger car engine using hydrogen direct injection. It targets gasoline-like specific power output by mixture enrichment down to stoichiometric operation. Another approach is to use a heavy-duty diesel engine equipped with spark ignition and hydrogen port fuel injection. Here, a diesel-like indicated efficiency is targeted through constant lean-burn operation. The measurement results show that both approaches are applicable. For the gasoline engine-based concept, stoichiometric operation requires a three-way catalyst or a three-way NOX storage catalyst as the primary exhaust gas aftertreatment system. For the... [more]

The urea-selective catalytic reduction (SCR) system, a nitrogen oxide reduction device for diesel vehicles, is a catalytic system that uses urea water solution (UWS) as a reducing agent. This system has a relatively wide range of operating temperatures. However, the freezing point of the reducing urea solution used in this system is −11 °C. When the ambient temperature dips below this freezing point in winter, the solution may freeze. Therefore, it is important to understand the melting characteristics of frozen UWS in relation to the operating conditions of the heating device to supply the minimum amount of aqueous solution required by the system in the initial stage of normal operation and startup of the urea−SCR system. In this study, we artificially froze a liquid solution by placing it along with a heating module in an acrylic chamber to simulate a urea solution tank. Two types of heating modules (P120 and P160) consisting of two heating elements and heat transfer bodies were used... [more]

REMgNi4-based alloys, RE(2−x)MgxNi4 (RE: rare-earth metals; 0 < x < 2), with a AuBe5-type crystal structure, exhibit reversible hydrogen absorption and desorption reactions, which are known as hydrogen storage properties. These reactions involve formation of three hydride phases. The hydride formation pressures and hydrogen storage capacities are related to the radii of the RE(2−x)MgxNi4, which in turn are dependent on the radii and compositional ratios of the RE and Mg atoms. The crystal structures formed during hydrogen absorption reactions are the key to understanding the hydrogen storage properties of RE(2−x)MgxNi4. Therefore, in this review, we provide an overview of the crystal structures in the hydrogen absorption reactions focusing on RE(2−x)MgxNi4.

The primary objective of this paper is to present a dynamic photovoltaic/thermal collector model in combination with a thermal energy storage tank. The added value of the proposed model is the use and integration of existing dynamic models for describing the entire photovoltaic/thermal system. The presented model was validated using measurements on the experimental system located at the Institute of Energy Technology, Faculty of Energy Technology, University of Maribor. The validation was carried out based on three different weather conditions—sunny, cloudy, and overcast. The validation results were evaluated using the normalized root mean square error and mean absolute percentage error for the temperature and output power of the photovoltaic/thermal collector and the temperature of the thermal energy storage tank. The model results concurred with the measurements, as the average mean absolute percentage error values for the temperature and output power of the photovoltaic/thermal coll... [more]

The potential of using the biomass of four wetland plant species (Iris pseudacorus, Juncus effusus, Phragmites australis and Typha latifolia) grown in treatment wetland systems and under natural conditions were tested to produce high-value materials using hydro-thermal liquefaction (HTL). The results show that the wetland plants biomass is suitable for biocrude and biochar production regardless of the origin. The hydrothermal liquefaction products’ (biocrude, biochar, aqueous and gaseous phase) yields vary according with the specific biomass composition of the species. Furthermore, the results show that the biomass composition can be affected by the growing condition (treatment wetland or natural unpolluted conditions) of the plants. None of the single components seems to have a determinant effect on the biocrude yields, which reached around 30% for all the analyzed plants. On the contrary, the biochar yields seem to be affected by the composition of the biomass, obtaining different yi... [more]