This paper presents research results on heat pipe numerical models as optimization of heat pipe heat exchangers for intensification of heat exchange processes and the creation of heat exchangers with high efficiency while reducing their dimensions. This work and results will allow for the extension of their application in passive and low-energy construction. New findings will provide a broader understanding of how heat pipes work and discover their potential to intensify heat transfer processes, heat recovery and the development of low-energy building engineering. The need to conduct research and analyses on the subject of this study is conditioned by the need to save primary energy in both construction engineering and industry. The need to save primary energy and reduce emissions of carbon dioxide and other pollutants has been imposed on the EU Member States through multiple directives and regulations. The presented numerical model of the heat pipe and the results of computer simulati... [more]

Belt conveyors are commonly used for the transportation of bulk materials. The most characteristic design feature is the fact that thousands of idlers are supporting the moving belt. One of the critical elements of the idler is the rolling element bearing, which requires monitoring and diagnostics to prevent potential failure. Due to the number of idlers to be monitored, the size of the conveyor, and the risk of accident when dealing with rotating elements and moving belts, monitoring of all idlers (i.e., using vibration sensors) is impractical regarding scale and connectivity. Hence, an inspection robot is proposed to capture acoustic signals instead of vibrations commonly used in condition monitoring. Then, signal processing techniques are used for signal pre-processing and analysis to check the condition of the idler. It has been found that even if the damage signature is identifiable in the captured signal, it is hard to automatically detect the fault in some cases due to sound dis... [more]

Stranded gas emission from the field production because of the limitations in the pipeline infrastructure has become one of the major contributors to the greenhouse effects. How to handle the stranded gas is a troublesome problem under the background of global “net-zero” emission efforts. On the other hand, the cost of water for hydraulic fracturing is high and water is not accessible in some areas. The idea of using stranded gas in replace of the water-based fracturing fluid can reduce the gas emission and the cost. This paper presents some novel numerical studies on the feasibility of using stranded natural gas as fracturing fluids. Differences in the fracture creating, proppant placement, and oil/gas/water flowback are compared between natural gas fracturing fluids and water-based fracturing fluids. A fully integrated equation of state compositional hydraulic fracturing and reservoir simulator is used in this paper. Public datasets for the Permian Basin rock and fluid properties and... [more]

The higher share of renewable energy sources in the electrical grid and the electrification of significant sectors, such as transport and heating, are imposing a tremendous challenge on the operation of the energy system due to the increase in the complexity, variability and uncertainties associated with these changes. The recent advances of computational technologies and the ever-growing data availability allowed the development of sophisticated and efficient algorithms that can process information at a very fast pace. In this sense, the use of machine learning models has been gaining increased attention from the electricity sector as it can provide accurate forecasts of system behaviour from energy generation to consumption, helping all the stakeholders to optimize their activities. This work develops and proposes a methodology to enhance load demand forecasts using a machine learning model, namely a feed-forward neural network (FFNN), by incorporating an error correction step that i... [more]

The COVID-19 pandemic has generated multiple impacts. In particular, in the educational sector, the virtual class modality generated changes in the patterns of energy consumption at the institutional level; the identification of this consumption will allow us to reflect on new energy saving and efficient use strategies. In this research, we present a case study of the effects of the COVID-19 pandemic on electricity consumption in 13 state universities in Michoacán, Mexico. Electric energy consumption has been evaluated before and during the presence of the COVID-19 between 2019 and 2020. The comparative analysis estimated the reduction in energy consumption and its economic and environmental impact. The results show a considerable decrease in electricity consumption, generating an average saving of 76.24 MWh/month, which translates into an annual emission reduction from 2019 to 2020 of approximately 497 TnCO2e, and in economic terms of $8,882.25 USD each month. In general, it was ident... [more]

Multilevel inverters have been widely used in various industrial applications such as renewable energy generation and electric vehicles. An improved circuit of symmetrical cascaded switched-capacitor multilevel inverter is proposed so that the reactive power is absorbed by its power supply instead of capacitors. Then, a special hybrid pulse width modulation strategy combing level-shifted pulse width modulation (LS-PWM) and phase-shifted pulse width modulation (PS-PWM) was developed for the inverter. With this modulation algorithm, the power between cascaded units is automatically balanced, and the voltage of the capacitor in each unit is also automatically balanced to the dc input voltage. In addition, the optimized capacitor voltage ripple makes it possible to use a smaller capacitor to produce a better output voltage waveform. Theoretical analysis, simulation and experimental results show that the equivalent switching frequency of the cascaded multilevel inverter is twice the origina... [more]

A hybrid capacitive deionization and humidification-dehumidification (CDI−HDH) desalination system is theoretically investigated for the desalination of brackish water. The CDI system works with two basic operations: adsorption and regeneration. During adsorption, water is desalted, and during the regeneration process the ions from electrodes are detached and flow out as wastewater, which is higher in salt concentration. This wastewater still contains water but cannot be treated again via the CDI unit because CDI cannot treat higher-salinity waters. The discarding of wastewater from CDI is not a good option, since every drop of water is precious. Therefore, CDI wastewater is treated using waste heat in a process that is less sensitive to high salt concentrations, such as humidification-dehumidification (HDH) desalination. Therefore, in this study, CDI wastewater was treated using the HDH system. Using the combined system (CDI−HDH), this study theoretically investigated brackish water o... [more]

This study investigated the impact of sonication parameters on the efficiency of the extraction of bioactive substances from hawthorn berries. The ultrasonic treatment was performed in two modes: continuous and pulse. In the pulse mode, the samples were sonicated with the following processor settings: 1 s on-2 s off. The effective ultrasonic processor times were 5, 10, and 15 min, and the total extraction times were 15 min, 30 min, and 45 min. The content of total polyphenols and total anthocyanins was determined by a spectrophotometric method. We show that the operating mode of the processor affects extraction efficiency, energy consumption and unit energy inputs. Extraction supported by a pulsating ultrasonic field allowed saving from 20% to 51% of energy with a simultaneous higher efficiency of the process. In addition, we show that the unit energy consumption in the pulsed mode was about 40% to 68% lower than the energy consumption in the case of continuous operation.

The problem of energy poverty exists in practically every European country. Its size and scope are determined by a variety of factors, ranging from economic development to the direction of energy and climate policy implementation to cultural factors. Our aim in this paper was to carry out a comparative analysis of indicators related to energy poverty and sustainable development to identify correlations and links between the two issues and determine how they are related. The fact that the analysis was performed for most European countries is new and represents a broad spectrum of research; we were not limited to studies of countries bound by formal political-economic arrangements or by consideration of the degree of economic development. This approach enabled explication of how diverse the situation is in Europe. The research methods used included a critical analysis of the literature and the use of descriptive and mathematical-statistical tools. The main conclusions and findings of the... [more]

Construction of offshore gas wells is characterized by increased requirements for both the technological process in general and the technological parameters of drilling fluids in particular. Parameters and properties of the used drilling muds must meet a large number of requirements. The main one is the preservation of the permeability of the reservoirs, in addition to the environmental and technological concerns. At the same time, pressures in the productive formation at offshore fields are often high; the anomaly coefficient is 1.2 and higher. The use of barite in such conditions can lead to contamination of the formation and a decrease in future well flow rates. In this regard, the development and study of the compositions for weighted drilling muds is necessary and relevant. The paper presents investigations on the development of such a composition based on salts of formic acid (formates) and evaluates the effect of the molecular weight of the polymer reagent (partially hydrolyzed... [more]

Supercritical carbon dioxide (SCO2) jets are a promising method to assist drilling, enhance oil−gas production, and reduce greenhouse gas emissions. To further improve the drilling efficiency of SCO2 jet-assisted drilling, organ-pipe nozzles were applied to generate a self-excited oscillation SCO2 jet (SEOSJ). The impact pressure oscillation and rock erosion capability of SEOSJs under both supercritical and gaseous CO2 (GCO2) ambient conditions were experimentally investigated. It was found that the impact pressure oscillation characteristics of SEOSJs produced by organ-pipe nozzles are dramatically affected by the oscillation chamber length. The optimum range of the dimensionless chamber length to generate the highest impact pressure peak and the strongest pressure oscillation is within 7−9. The dimensionless pressure peak and the pressure ratio decreases gradually with increasing pressure difference, whereas the pressure oscillation intensity increases with increasing pressure differ... [more]

Low-carbon knowledge is seen as having a key role in interfering with household energy consumption behaviors by wide consensus from political and academic areas. Whether low-carbon publicity will help to reduce household energy consumption is still in dispute. By constructing an integrated knowledge-intention-behavior model and using 1335 detailed survey questionnaires of household energy behavior in Henan Province, the central area in China, this paper finds that in the developing area low-carbon knowledge or publicity cannot positively impact household energy-saving behavior even if mediated by energy awareness and energy-saving attitudes. Low-carbon knowledge does improve energy-saving attitude and attitude does not decrease household energy consumption directly. Familiarity with particular energy-saving knowledge would decrease the household energy consumption but not significantly in the statistics. Path analysis unfolds the reason that the heterogeneous effects of purchase-based... [more]

This work defines and analyzes the performance of a polygeneration system in five different locations in Spain to maintain the thermal comfort and air quality of an office building. The facility is based on a chiller and a CHP engine with PV panels that provide almost all the electricity demand of the chiller. According to the energy performance analysis results, the installation working in Bilbao is a full polygeneration system since no electricity needs to be imported from the grid in summer. To quantify the energy savings related to a separated production facility, polygeneration indicators (percentage of savings PES/PExS and equivalent electric efficiency EEE/EExE) have been calculated in energy and exergy terms. The main motivation for using exergy is based on the ambiguity that can arise from the point of view of the First Law. As expected, the exergetic indicators have lower values than the energetic ones. In addition, an in-depth analysis was conducted for the air-handling unit... [more]

In this paper, large eddy simulation (LES) was adopted to simulate the cavitating flow in a waterjet pump with emphasis on the tip clearance flow. The numerical results agree well with the experimental observations, which indicates that the LES method can make good predictions of the unsteady cavitating flows around a rotor blade. The LES verification and validation (LES V&V) analysis was used to reveal the influence of cavitation on the flow structures. It can be found that the LES errors in cavitating region are larger than those in the non-cavitating area, which is mainly caused by more complicated cavitating and tip clearance flow structures. Further analysis of the interaction between the cavitating and vortex flow by the relative vorticity transport equation shows that the stretching, dilatation and baroclinic torque terms have major effects on the generation and transport of vortex structure. Meanwhile the Coriolis force term and viscosity term also exacerbate the vorticity tran... [more]

The concept of predictive and preventive maintenance and constant monitoring of the technical condition of industrial machinery is currently being greatly improved by the development of artificial intelligence and deep learning algorithms in particular. The advancement of such methods can vastly improve the overall effectiveness and efficiency of systems designed for wear analysis and detection of vibrations that can indicate changes in the physical structure of the industrial components such as bearings, motor shafts, and housing, as well as other parts involved in rotary movement. Recently this concept was also adapted to the field of renewable energy and the automotive industry. The core of the presented prototype is an innovative interface interconnected with augmented reality (AR). The proposed integration of AR goggles allowed for constructing a platform that could acquire data used in rotary components technical evaluation and that could enable direct interaction with the user.... [more]

Post-harvest loss is a serious issue to address challenge of food security. A solar-grid hybrid cold storage system was developed and designed for on-farm preservation of perishables. Computational Fluid Dynamic analysis was performed to assess airflow and temperature distribution inside the cold chamber. The system comprises a 21.84 m3 cubical cold storage unit with storage capacity of 2 tonnes. A hybrid solar system comprising 4.5 kWp PV system, 5 kW hybrid inverter, and 600 Ah battery bank was used to power the entire system. A vapor-compression refrigeration system (2 tonnes) was employed coupled with three cooling pads (filled with brine solution) as thermal backup to store cooling (−4 °C to 4 °C). Potatoes were stored at 8 °C for a period of three months (May 2019 to July 2019) and the system was tested on grid utility, solar, and hybrid modes. Solar irradiation was recorded in range of 5.0−6.0 kWh/(m2 × d) and average power peak was found to be 4.0 kW. Variable frequency drive w... [more]

The development of supercapacitors with high volumetric capacitance and high-rate performance has been an important research topic. Activated carbon (AC), which is a widely used material for supercapacitor electrodes, has different surface structures, porosities, and electrochemical properties. However, the low conductivity of the electrode material is a major problem for the efficient use of AC in supercapacitors. To tackle this challenge, we prepared conductive, additive-free electrodes for supercapacitors by a simple one-pot treatment of AC with melamine (nitrogen source), pitch, and sucrose (both carbon source). Nitrogen-doped and carbon-coated AC was successfully generated after high-temperature heat treatment. The AC was doped with approximately 0.5 at.% nitrogen, and coated with carbon leading to a decreased oxygen content. Thin carbon layers (~10 nm) were coated onto the outer surface of the AC, as shown in TEM images. The modification of the AC surface with a sucrose source is... [more]

Joint roughness determination is a fundamental issue in many areas of rock engineering, because joint roughness has significant influences on mechanical properties and deformation behavior of rock masses. Available models suggested in the literature neglected combined effects of shear direction, scale of rock discontinuities, inclination angle, and amplitude of asperities during the roughness calculations. The main goals of this paper are to establish a comprehensive parameter that considers the characteristics of the size effect, anisotropy, and point spacing effect of the discontinuity roughness, and to investigate the correlation between the proposed comprehensive parameter and joint roughness coefficients. In this work, the Barton ten standard profiles are digitally represented, then the morphological characteristics of the discontinuity profiles are extracted. A comprehensive parameter that considers the characteristics of the size effect, anisotropy, and point spacing effect of t... [more]

In this paper, a time-lapse image method is proposed to improve the classification accuracy for multistate appliances with complex patterns based on nonintrusive load monitoring (NILM). A log-likelihood ratio detector with a maxima algorithm was applied to construct a real-time event detection of home appliances. Moreover, a novel image-combining method was employed to extract information from the data based on the Gramian angular field (GAF) and recurrence plot (RP) transformations. From the simulation results, it was confirmed that the classification accuracy can be increased by up to 30% with the proposed method compared with the conventional approaches in classifying multistate appliances.

To use lithium-iron-phosphate battery packs in the supply systems of any electric mining equipment and/or machines, the required conditions of work safety must be met. This applies in particular to coal mines endangered by fire and/or explosion. To meet the spark-safety conditions, the cells (together with the battery management system—BMS) must be isolated from the influence of the environment, and therefore placed in special fire-tight housings. This significantly degrades the heat dissipation, thus affecting the operating conditions of the cell-packs. Therefore, their usage without the so-called BMS is not recommended, as shown in the authors’ preliminary research. In practice, various BMS are used, most often with the so-called passive balancing. However, their application in mines is uncertain, due to the effect of heating under operation. When it comes to active BMS, they usually possess a quite complex structure and hence, are relatively expensive. Therefore, the authors conduct... [more]

In the present article, the heat transfer and fluid flow of the air in a compact microchannel gas heater (MCGH) was experimentally quantified. To understand the effect of heat flux value (HFV), and inlet velocity on the heat transfer coefficient (HTC), wall temperature, friction factor, Nusselt number, average pressure-drop value (PDV) and performance index (PI), a microchannel gas heater was constructed and tested with pressurized air. The results showed that the HTC was 20 W/(sqmK) to 70 W/(sqmK), corresponding to inlet velocities 6.7 m/s and 16.7 m/s, respectively within HFV < 1 kW/m2. Also, the highest PI was 1.19 meaning that the HT rate can be increased by 19% at u = 15 m/s in comparison with the reference case (at u = 13.3 m/s). Likewise, the HTC was intensified once the inlet velocity is increased. It was also identified that increasing the HFV has a strong effect on wall temperature, however, slightly changes the HTC. By increasing the heat flux value from 200 W/sqm to 1000... [more]

Optimal injector selection is a key oilfield development endeavor that can be computationally costly. Methods proposed in the literature to reduce the number of function evaluations are often designed for pattern level analysis and do not scale easily to full field analysis. These methods are rarely applied to both water and miscible gas floods with carbon storage objectives; reservoir management decision making under geological uncertainty is also relatively underexplored. In this work, several innovations are proposed to efficiently determine the optimal injector location under geological uncertainty. A geomodel ensemble is prepared in order to capture the range of geological uncertainty. In these models, the reservoir is divided into multiple well regions that are delineated through spatial clustering. Streamline simulation results are used to train a meta-learner proxy. A posterior sampling algorithm evaluates injector locations across multiple geological realizations. The proposed... [more]

Meeting the Paris Agreement on climate change requires substantial investments in low-emissions energy and significant improvements in end-use energy efficiency. These measures can also deliver improved air quality and there is broad recognition of the health benefits of decarbonising energy. Monetising these health benefits is an important part of a robust assessment of the costs and benefits of renewable energy and energy efficiency programs (clean energy programs (CEP)) and a variety of methods have been used to estimate health benefits at national, regional, continental and global scales. Approaches, such as unit damage cost estimates and impact pathways, differ in complexity and spatial coverage and can deliver different estimates for air pollution costs/benefits. To date, the monetised health benefits of CEP in Australia have applied international and global estimates that can range from 2−229USD/tCO2 (USD 2016). Here, we calculate the current health damage costs of coal-fired po... [more]

The growth of populations and economy in Northern Cyprus has led to continuing utilization of fossil fuels as the primary source of electricity, which will raise environmental pollution. Thus, utilizing renewable energy, particularly solar energy, might be a solution to minimize this issue. This paper presents the potential of grid-connected solar PV power generation at Near East University Hospital (NEU Hospital), one of the largest and leading medical facilities in Northern Cyprus, to meet the energy demand during the daytime to reduce energy bills. For this purpose, the first objective of the study is to evaluate the solar energy potential as a power source for the NEU Hospital based on four datasets (actual measurement, Satellite Application Facility on Climate Monitoring (CMSAF), Surface Radiation Data Set-Heliosat (SARAH), and ERA-5, produced by the European Centre for Medium-range Weather Forecast). The results showed that the solar resource of the selected location is categoriz... [more]

The inter-blade passage vortex, the vortex rope of the draft tube, and the vortex in the guide apparatus are the characteristics of flow instability of the Francis turbine, which may lead to fatigue failure in serious cases. In the current study, in order to accurately capture the transient turbulent characteristics of flow under different conditions and fully understand the flow field and vortex structure, we conduct a simulation that adopts sliding grid technology and the large-eddy simulation (LES) method based on the wall-adapting local eddy viscosity (WALE) model. Using the pressure iso-surface method, the Q criterion, and the latest third-generation Liutex vortex identification method, this study analyzes and compares the inter-blade passage vortex, the vortex rope of the draft tube, and the outflow and vortex in the guide apparatus, focusing on the capture ability of flow field information by various vortex identification methods and the unique vortex structure under the conditi... [more]