This paper discusses fuel cell electric vehicles and, more specifically, the challenges and development of hydrogen-fueled buses for people accessing this transportation in cities and urban environments. The study reveals the main innovations and challenges in the field of hydrogen bus deployment, and identifies the most common approaches and errors in this area by extracting and critically appraising data from sources important to the energy perspective. Three aspects of the development and horizons of fuel cell electric buses are reviewed, namely energy consumption, energy efficiency, and energy production. The first is associated with the need to ensure a useful and sustainable climate-neutral public transport. Herewith, the properties of the hydrogen supply of electric buses and their benefits over gasoline, gas, and battery vehicles are discussed. The efficiency issue is related to the ratio of consumed and produced fuel in view of energy losses. Four types of engines−gasoline, di... [more]

The quality of human nutrition has acquired significant improvements thanks to the opportunity to store food in suitable temperature conditions. Refrigeration has allowed the slowing of chemical and biological degradation and hence the waste of foodstuff, but at the same time increases energy consumption. These effects impact the environment and the sustainability performance of the cold chain, and drive consumers’ choices. The stakeholders of the chain are, therefore, constantly looking for improvement actions to reduce environmental impacts. This paper aims to provide a methodology for prioritizing and assessing the energy efficiency measures for cold chains in terms of quality losses and specific energy consumption, distinguishing between technological, maintenance, and managerial opportunities. This analysis is based on the cold supply chain tool, developed under the H2020 project ICCEE (“Improving Cold Chain Energy Efficiency”) which focuses on a holistic approach, not looking onl... [more]

In the slider-crank mechanism, where the rotational motion is transformed into the translational motion, the input torque is highly variable due to the inertial effect. The consequence of fluctuating torque is that it causes the load upon the prime mover to be inconsistent, which might likely results in higher stresses in the components, higher joint friction, and the necessity for higher driving power. In this paper, a technique of reduction of the dynamic torque and joint forces in the slider-crank mechanism using mechanical resonance is described. A comparative result of the conventional system in the process of gas compression, as a practical application example, is presented. The result shows that the utilization of resonance has the advantage of providing lower dynamic torque and rotating joint forces compared to the conventional operation. Since the compression of the air itself takes effect as a spring compression, in the gas compression process, the narrow torque and force reg... [more]

To date, along with the rapid development of urban rail transit (URT) in China, the evaluation of operational efficiency and energy efficiency has become one of the most important topics. However, the extant literature regarding the efficiency of URT at the line level and considering carbon emissions is limited. To fill the gap, an evaluation model based on slacks-based measure (SBM) data envelopment analysis (DEA) is proposed to measure the efficiencies, which is applied to 61 URT lines in China’s four megacities. The findings are summarized as follows: (1) The average operational efficiency and energy efficiency of URT lines are low, and both have great room for improvement. (2) There are significant disparities in the efficiency of URT lines in the case cities. For instance, the average operational efficiency of URT lines in Guangzhou is higher than that of other cities, while the average energy efficiency of URT lines in Shanghai is higher than that of other cities. (3) The URT lin... [more]

The quality of the housing environment (HE) is an important issue that has a direct impact on the life of inhabitants. Aiming for quality in residential architecture begins with a well-designed HE, with the designing process being a value that is difficult to evaluate. Nowadays, a well-designed HE takes into account the energy efficiency of a building. An appropriate degree of thermal comfort, which is required by inhabitants, needs to be considered at the design stage. Designers can use building certification programs and multi-criteria analysis to motivate investors to construct buildings in accordance with energy efficiency requirements. These systems respond to the needs of energy efficiency, thermal comfort, sustainable heating, and ventilation. Defining ways and methods to evaluate quality in architectural projects will allow the value of the HE to be improved. For this purpose, a multi-criteria analysis of five systems that can be used to evaluate HE quality and energy efficienc... [more]

The article deals with the impacts of economic, ecological, and social development scenarios in ensuring sustainable energy development. EU countries were the statistical bases of the study; the assessment period was from 2000 to 2019. The information bases of the research were the World Bank, the Organization for Economic Cooperation and Development, and the European Commission data. Based on the generalized method of moments, the authors investigated the dependence of energy consumption on economic, environmental, and social development factors. The results confirm the positive relationship between renewable energy consumption and GDP per capita, foreign direct investment, and energy depletion. A negative relationship between the consumption of renewable energy, CO2 emissions, and domestic gas emissions was proved. Based on intelligent data analysis methods (methods involving one-dimensional branching CART and agglomeration), countries were clustered depending on the nature of the en... [more]

Market-based instruments such as white certificates offer the potential to increase efficiency gains, reduce primary energy consumption and make energy systems more resilient. The purpose of this paper is to provide insights into the white certificate scheme through a case study analysis. In light of increasing decarbonization and energy efficiency targets, it is important to rethink the role that policy instruments play in the energy transition, including the energy efficiency obligation schemes within which white certificate schemes fall. We focus on Italy’s white certificate scheme because it is among the longest-lived and has achieved notable results. The scheme is characterized by annually increasing energy savings targets, flexibility, the opportunity to include many interventions, and the role of energy services companies. We provide evidence based on an empirical survey and fill the research gap left by the latest updates to the scheme along with an appraisal of those updates,... [more]

Irradiance variability is one of the main challenges for using photovoltaic energy. This variability affects the operation of maximum power point trackers (MPPT) causing energy losses. The logic of the Perturb-and-Observe MPPT algorithm is particularly sensitive to quick irradiance changes. We quantified the existing relation between irradiance variations and efficiency loss of the logic of the Perturb-and-Observe MPPT algorithm, along with the sensitivity of the MPPT to its control parameters. If the algorithm parameters are not tuned properly, its efficiency will drop to nearly 2%. Irradiance variability causes a systematic energy loss of the algorithm that can only be quantified by ignoring the hardware components. With this, we aim to improve the energy yield estimation by providing an additional efficiency loss to be considered in the calculations.

Energy renovations of the building stock are a paramount objective of the European Union (EU) to combat climate change. A tool for renovation progress monitoring is energy performance certificate (EPC) labelling. The present study tested the effect of different EPC label classifications on a national database, which comprises ~25,000 EPC values from apartment buildings, detached houses, office buildings, and educational, commercial, and service buildings. Analysing the EPC classes labelling resulting from four different EU methods, we estimated the annual renovation rates, costs, energy savings, and CO2 emissions reduction that would affect the national building stock if each of them was adopted, to fulfil the European Climate Target Plan by the year 2033. The ISO 52003-1:2017 two-point and one-point methods determined a very uneven distribution of renovation rates, from 0.45% to ~9%. Conversely, the Directive 15% recently proposed in COM/2021/802 with uniform rates determined smaller... [more]

For decision-making and governance, smart cities depend on tracking data collected via a substantial percentage of wireless sensing nodes. However, several limitations affect Wireless Sensor Network (WSN)-based Internet of Things (IoT) services, such as low battery life, recurrent connectivity problems due to multi-hop connections, and a limited channel capacity. Furthermore, in many systems, clustering and routing are handled independently, which prevents the adaptation of effective strategies for optimal energy usage and prolonged network lifespan. This research gathers data from heterogeneous IoT nodes linked via WSN and distributed across a smart infrastructure. There are two interrelated problems to be addressed with respect to energy efficiency computations: clustering and routing. We provide a new clustering strategy through which efficient routing of critical and regular data is handled. As a result, both clustering and routing have been significantly strengthened, which balanc... [more]

The Architecture, Engineering and Construction (AEC) industry has been utilizing Decision Support Systems (DSSs) for a long time to support energy efficiency improvements in the different phases of a building’s life cycle. In this context, there has been a need for a proper means of exchanging and managing of different kinds of data (e.g., geospatial data, sensor data, 2D/3D models data, material data, schedules, regulatory, financial data) by different kinds of stakeholders and end users, i.e., planners, architects, engineers, property owners and managers. DSSs are used to support various processes inherent in the various building life cycle phases including planning, design, construction, operation and maintenance, retrofitting and demolishing. Such tools are in some cases based on established technologies such Building Information Models, Big Data analysis and other more advanced approaches, including Internet of Things applications and semantic web technologies. In this framework,... [more]

Malaysia’s energy intensity (GWh/GDP) shows an increasing trend since the 1990s, leading to the government’s efforts to promote energy efficiency via policies such as the National Energy Efficiency Action Plan (NEEAP), which includes the Energy Performance Contracting (EPC) initiative. This paper reviews recent publications in industrial Combined Heat and Power (CHP) with a focus on international case studies relevant to Malaysian industries that use industrial steam and highlights trends within the research area. It also provides the basis for more case studies to be performed in the Malaysian industry to improve energy efficiency while also supporting further academic research in the area. Additionally, the paper documents the importance of data collection and analysis as well as demand forecasting, not only for a better understanding of industrial energy systems but also to increase profitability since system loads may vary throughout a typical year. A multi-criteria and comprehensi... [more]

For heritage buildings, energy-efficient retrofitting cannot be applied with the same range of possibilities as with existing buildings. Applying such improvements to heritage buildings can be challenging due to their historic and/or cultural significance and non-standard construction methods. This paper reviews the technical challenges and potential of applying energy efficient retrofit elements in heritage buildings. The retrofitting measures reviewed are draught-proofing, windows, insulation, ventilation, heating, solar photovoltaics and phase change materials. It is possible to significantly reduce energy use in heritage buildings with such retrofits. However, there is no universal way to apply energy-efficient retrofitting in heritage buildings, which is apparent in the literature, where case studies are prevalent.

This work focuses on the geometry effects over the performance of oscillating water column (OWC)-type wave energy converter (WEC) systems and searches for the OWC geometries that enhance the energy efficiencies under the same wave conditions. To analyze the hydrodynamic performances of the WEC systems, an in-house smoothed particle hydrodynamics (SPH) code based on weakly compressible fluid approach is utilized. The energy efficiency enhancement studies of the determined OWC device are carried out with a two-step geometry modification procedure. The first step starts with the validation of the free-surface elevation and orbital velocity time histories. Then, a three-by-three simulation matrix that depends on the geometrical design parameters of chamber length and front wall draft is run at three different wave conditions, and the OWC geometry that produces the maximum energy efficiency is determined. In the second step, the corner regions of the obtained optimal geometry are chamfered,... [more]

Edge devices and their associated computing techniques require energy efficiency to improve sustainability over time. The operating edge devices are timed to swap between different states to achieve stabilized energy efficiency. This article introduces a Cognitive Energy Management Scheme (CEMS) by considering the offloading and computational states for energy efficacy. The proposed scheme employs state learning for swapping the computing intervals for scheduling or offloading depending on the load. The edge devices are distributed at the time of scheduling and organized for first come, first serve for offloading features. In state learning, the reward is allocated for successful scheduling over offloading to prevent device exhaustion. The computation is therefore swapped for energy-reserved scheduling or offloading based on the previous computed reward. This cognitive management induces device allocation based on energy availability and computing time to prevent energy convergence. Co... [more]

Climate change is a serious challenge facing the world today. Countries are already working together to control carbon emissions and mitigate global warming. Improving energy efficiency is currently one of the main carbon reduction measures proposed by the international community. Within this context, improving energy efficiency in manufacturing systems is crucial to achieving green and low-carbon transformation. The aim of this work is to develop a new preventive maintenance strategy model. The novelty of the model is that it takes into account energy efficiency, maintenance cost, product quality, and the impact of recycling defective products on energy efficiency. Based on the relationship between preventive maintenance cost, operating energy consumption, and failure rate, the correlation coefficient is introduced to obtain the variable preventive maintenance cost and variable operating energy consumption. Then, the cost and energy efficiency models are established, respectively, and... [more]

Successful energy transitions, also referred to as leapfrog development, present enormous prospects for EU nations to become carbon neutral by shifting from fossil fuels to renewable energy sources. Along with climate change, EU countries must address energy security and dependency issues, exacerbated by factors such as the COVID-19 pandemic, rising energy costs, conflicts between Russia and Ukraine, and political instability. Diversifying energy sources, generating renewable energy, increasing energy efficiency, preventing energy waste, and educating the public about environmental issues are proposed as several strategies. The study draws the conclusion that central European countries may transition to a clean energy economy and become carbon neutral on economic and strategic levels by locating alternative clean energy supply sources, reducing energy use, and producing renewable energy. According to the study, the EU energy industry can be decarbonised and attain energy security using... [more]

This research aims to develop a conceptual framework for a design support model for energy-efficient vertical green façade systems with a focus on their thermal and shading performance. The model applies forecasting and backcasting methods based on an extensive literature review and analysis by the authors, with a particular focus on the energy efficiency parameters of vertical green façades. The key parameters are related to the location (climate, surroundings, orientation of the façade), system type (air gap dimensions, irrigation, structure, and substrate type) and plant characteristics (leaf area index, leaf absorptivity, foliage thickness, stomatal resistance, typical leaf dimensions, leaf emissivity, transmission coefficient, radiation attenuation) determined from actual data collected from buildings. This holistic approach changes the perception of a user and an architect while facilitating the design process. The method’s limitations result from the scarcity of comparative expe... [more]

The production of low-carbon hydrogen based on renewable energy sources is considered a promising direction in the development of the modern world economy. The purpose of the presented research is to develop technologies and study the processes of converting biogases into hydrogen, as well as its use in low-temperature fuel cells. The methodology for organizing a multi-stage laboratory experiment for obtaining biogas, its purification from impurities and, in the future, the production of biohydrogen was developed based on field studies in Peter the Great St. Petersburg Polytechnic University. The results of modeling studies have shown that during biogas reforming, it is possible to obtain a hydrogen mixture with a hydrogen content of 98% vol and methane 2% vol. Based on the results of the research, the possibility of using the significant potential of “weak” biogas containing methane 30−45% vol to produce biohydrogen (more than 93% vol) was proved. A technique for using biohydrogen in... [more]

With stricter IMO regulations on CO2 taking effect in 2023 and ambitious goals to reduce carbon intensity by 2030, the maritime industry is scrambling to clean up its act. Conventional methods and equipment are now being reevaluated, upgraded or completely replaced. The difference between a short-term fix and a long-term sustainable option is how flexible vessels will be to use new energy sources or technology as they become viable. The review discusses the recent literature on renewable energy sources, technical and operational strategies for new and existing ships, technology maturity, and alternative fuels. It is found that the IMO’s targets can be met by combining two or three technologies, or via a radical technology shift which can provide innovative, high-efficiency solutions from an environmental and economic standpoint. It has also been noted that policies and enforcement are essential management instruments for mitigating the unfavourable environmental effects of marine trans... [more]

Balancing electricity demand and supply remains a significant challenge for the power systems in developing countries, such as Nigeria. In Nigeria, there is a shortage of adequate power supply, and demand-side management (DSM) plays a minor role in the power balancing mechanism with load shedding being widely used. The paper aims to review and compare various existing and emerging DSM strategies in developing countries. An extensive and systematic review was conducted to evaluate potential solutions using DSM to increase the overall energy efficiency in the Nigerian electricity market. This study found that, although the technical and economic potentials of DSM vary in developed countries, the uptakes of DSM have been severely hampered hence preventing the full exploitation and utilisation of the full potential of DSM. The initiatives of a DSM model in Nigeria and other developing countries can play a significant role in addressing demand and supply challenges but an upgrade of the ene... [more]

Environmental protection is currently one of the key priority areas of the European Union (EU). The search for effective solutions for the supply and use of energy in cities is currently a key topic. The reduction in gas emissions and the use of renewable energy sources are goals that result from environmental aspects. The purpose of this publication is to conduct a literature review in the area of municipal energy management. Municipal energy management systems integrate many areas, from energy supply systems and the modernization of public transport to the energy demand reduction of residential and commercial facilities. The results of the literature review research have allowed for the classification of articles based on the following criteria: research methodology, research purpose, research data collection method, use of research results article type, and research subject area.

Tracking the trend of restricted access to natural fossil energy resources determines the need to search for alternative energy sources, introducing energy-efficient technologies, and optimizing the energy supply system based on intelligent networks. Understanding district heating enterprises’ readiness to work with innovative renewable resources based on climate neutrality plays a unique role. Thus, this article is devoted to the study of the features of providing and determining the district heating enterprises’ capacity to integrate climate management of innovative resources to produce green thermal energy. The research methodology is based on a combination of systemic, process and cybernetic approaches to determining the resource sustainability of district heating enterprises for implementing climate innovations. The scientific novelty of the study lies in a comprehensive assessment of the ability of district heating enterprises to use renewable resources (biomass, waste, hydropowe... [more]

The rapidly increasing concentrations of carbon dioxide lead to a threat of global climate change. As one of the major sources of carbon emissions in the Antarctic region, shipborne tourism in the Antarctic is expanding rapidly. Consequently, the carbon emissions of shipborne tourism in Antarctica are rapidly increasing. However, there is not enough attention being paid to this issue. In this paper, a calculation model was established to calculate the carbon emissions of cruise ships from the 2003/04 season to the 2016/17 season. The evolution of the carbon emissions from Antarctic cruise ships was described. An aggregate energy efficiency index was developed to evaluate the energy efficiency performance of Antarctic vessels. The key drivers were analyzed to find the paths of carbon reduction. The results show that: (1) The emissions per passenger-trip did not show a downward trend. The total carbon emissions increased continuously with the increasing number of tourists. The total carb... [more]

The improvement of the overall utilization rate of compressed natural gas (CNG) engine fuel is the basis of efficient energy utilization. On the foundation of heat balance theory of internal combustion engines, this study fully considers the operation characteristics of CNG engines and systematically analyzes the distribution characteristics of different waste heat under variable working conditions. The nonlinear relationship between speed and intercooler heat source becomes evident with the increasing of intake mass flow rate. In accordance with the structural characteristics, the thermodynamic model, heat transfer model and environmental model of dual-loop organic Rankine cycle (DORC) are constructed. The system potential in full working environments is systematically evaluated. Compared with the speed, airmass flow has a significant effect on comprehensive performance of loop. The maximum power, heat transfer area and power output of per unit heat transfer area (POPA) of DORC are 36... [more]