Hydrogen energy, as a clean and green energy medium, is characterized by large capacity, extended lifespan, convenient storage, and seamless transmission. On the one hand, in the power system, hydrogen can be prepared by the electrolysis of water using the surplus power from intermittent new energy generation, such as photovoltaic and wind power, to increase the space for new energy consumption. On the other hand, it can be used to generate electricity from the chemical reaction between hydrogen and oxygen through the fuel cell and be used as a backup power source when there is a shortage of power supply. In this paper, based on the teaching practice, the conversion mechanism and coupling relationship between various forms of energy, such as photovoltaic energy, hydrogen energy, and electric energy, were deeply analyzed. Further, a hydrogen-electricity coupling digital simulation experimental system, including photovoltaic power generation, fuel cell, and electrolysis hydrogen system,... [more]

This paper presents a new grid-forming strategy for hybrid AC/DC microgrids using bidirectional virtual inertia support designed to address weak grid conditions. The stability of hybrid AC/DC microgrids heavily relies on the AC mains frequency and the DC-link voltage, and deviations in these factors can lead to undesirable outcomes such as load curtailments and power system congestions and blackouts. This paper introduces a unique approach that leverages bidirectional virtual inertia support to enhance the stability and reliability of hybrid AC/DC microgrids under weak grid conditions. The proposed strategy employs virtual inertia as a buffer to mitigate rapid changes in DC-link voltage and AC frequency, thereby enhancing system stability margins. This strategy significantly contributes to a more stable and reliable grid operation by reducing voltage and frequency fluctuations. A standard hybrid AC/DC microgrid configuration is used to implement the bidirectional virtual inertia suppor... [more]

In submerged arc welding, evaluating elemental transfer behaviors is critical for selecting and designing welding materials. Accurate assessment of O, Si, and Mn transfer behavior is essential for ensuring process quality, particularly when silicon-manganese fluxes are applied. Traditional quantification methods, however, focus only on chemical reactions in the weld pool zone, potentially overlooking the cross-zone elemental transfer behavior and leading to significant predictive inaccuracies. This study investigates the CaO-SiO2-MnO flux, a prevalent silicon-manganese flux, focusing on O, Si, and Mn, which exhibit notable transfer behaviors of O, Si, and Mn. By employing a multi-zone approach and integrating various scientific principles, the research aims to improve the accuracy of predicting elemental transfer behaviors and deepen the understanding of the metallurgical processes in submerged arc welding when silicon-manganese fluxes are employed. The study proposes strategic enhance... [more]

Battery voltage is a pivotal parameter for evaluating battery health and safety. The precise prediction of battery voltage and the implementation of anomaly detection are imperative for ensuring the secure and dependable operation of battery systems. Nevertheless, during the actual operation of electric vehicles, battery performance is subject to the influence of the vehicle's operational state and battery characteristic parameters, introducing challenges to safety alerts. In order to address these challenges and achieve precise battery voltage prediction, this paper comprehensively considers the battery characteristics and driving behavior of electric vehicles in both charging and operational states. Mathematical processing, including averaging and variance calculation, is applied to the battery characteristic parameter data and driving behavior data. By integrating historical voltage data and employing a modified gradient boosting decision tree algorithm (GBDT), a fast and accurate o... [more]

Melanoidins, as macromolecular heterogeneous organic polymers, are produced from the Maillard reaction between amino and carbonyl groups during the thermal hydrolysis pretreatment (THP) of sludge. The brown color and recalcitrance of melanoidins pose a serious threat to wastewater treatment systems, such as invalidating UV disinfection and decreasing the efficiency of anaerobic digestion; thus, they have gradually received much concern in recent years. However, currently the study on THP-origin melanoidins is limited by a lack of reliable extraction and quantification methods. This paper presents a comprehensive review of the physical, chemical, and biological properties of melanoidins from different sources to fill the research gap on THP-origin melanoidins. The adverse effects of melanoidins on the management of wastewater and sludge are discussed, and for the first time, special attention is paid to the potential environmental hazards of THP-origin melanoidins to natural ecosystems.... [more]

A depressant is essential to the effective flotation-based separation of ilmenite and forsterite, based on their comparable physicochemical characteristics. In this work, dextran sodium sulfate (DSS) was initially introduced as a depressant, to aid in the separation of ilmenite and forsterite. Comparing the DSS to conventional natural starch, the results indicate that the forsterite exerts a greater depression over the ilmenite. The difference in recovery of ilmenite and forsterite was 75.44% at 10 mg/L of DSS dosage. The DSS was chemisorbed strongly onto the forsterite surface via Mg active sites, whereas its interaction with the ilmenite surface via physisorption was weak, based on the XPS and molecular-dynamics-simulation analyses. The results of the AFM and QCM-D investigations showed that the DSS adsorption layer on the forsterite surface was larger than those on the ilmenite surface. Consequently, DSS may function as a depressant, to effectively separate forsterite from ilmenite... [more]

Lactic acid bacteria (LAB) constitute the microbial group most used as probiotics; however, many strains reduce their viability during their transit through the body. The objective of this study was to evaluate the effect of two microencapsulation techniques, as well as the incorporation of lactulose as a prebiotic and the use of chitosan coating on the microcapsules, on the viability of the Lactobacillus sp. strain FM4.C1.2. LAB were microencapsulated by extrusion or emulsion, using 2% sodium alginate as encapsulating matrix and lactulose (2 or 4%) as the prebiotic. The encapsulation efficiency was evaluated, and the capsules were measured for moisture and size. The encapsulation efficiency ranged between 80.64 and 99.32% for both techniques, with capsule sizes between 140.64 and 1465.65 µm and moisture contents from 88.23 to 98.04%. The microcapsules of some selected treatments (five) were later coated with chitosan and LAB survival was evaluated both in coated and uncoated microcaps... [more]

Reactivating oil and gas wells, increasing oil and gas production, and improving recovery provide more opportunities for energy supply especially in the extraction of unconventional oil and gas reservoirs. Due to changes caused by well completion and production in pore pressure around oil and gas wells, subsequently leading to changes in ground stress, and the presence of natural and induced fractures in the reservoir, the process of refracturing is highly complex. This complexity is particularly pronounced in shale oil reservoirs with developed weak layer structures. Through true triaxial hydraulic fracturing experiments on Jimsar shale and utilizing micro-CT to characterize fractures, this study investigates the mechanisms and patterns of refracturing. The research indicates: (1) natural fractures and the stress states in the rock are the primary influencing factors in the fracture propagation. Because natural fractures are widely developed in Jimsar shale, natural fractures are the... [more]

The construction and development of energy storage are crucial areas in the reform of China’s power system. However, one of the key issues hindering energy storage investments is the ambiguity of revenue sources and the inaccurate estimation of returns. In order to facilitate investors’ understanding of revenue sources and returns on investment of energy storage in the existing electricity market, this study has established multiple relevant revenue quantification models. The research methodology employed in this paper consists of three main components: Firstly, we established a revenue model and a cost model for energy storage participation in the electricity market. These models focus on arbitrage revenue, subsidy revenue, auxiliary services revenue, investment cost, operational and maintenance cost, and auxiliary service cost of energy storage. Subsequently, we utilized an enhanced Grey Wolf Optimizer algorithm to solve the optimization problem and maximize revenue, thus obtaining t... [more]

In this work, the internal flow behaviour and characteristic pressure fluctuations of an axial pump with varying water conditions are analysed. The impact of tip vortex flow on the pattern of turbulent flow is simulated numerically by the application of the CFD technique and experimentally using an acoustics analysis method. The numerical CFD data are verified with an experimental test model for accuracy and reliability. Based on the results, the difference in pressure in the internal flow and at the surfaces of the blade can be impacted through tip leakage vortex regions, which leads to changes in internal flow. Subsequently, the flow in the clearance and tip leakage vortex regions is changed. Moreover, the results reveal that the suction wall upstream is more unsteady near the surface due to more mixing, secondary flow, and tip leakage vortices. Pressure fluctuation occurs near the tip of the blade, caused by the increasing vortex flow velocity and hence raising the turbulent kinetic... [more]

Microcapsules have received considerable attention owing to their excellent self-healing properties, and many researchers have attempted to modify their microcapsules’ characteristics to meet the requirements of various applications. Owing to their excellent physical and chemical properties, nanomaterial-modified (nanomodified) microcapsules can be used to protect surface coatings and internal structures of cement-based materials. This paper summarizes the progress in theoretical research and practical application of nanomodified microcapsules in coatings and cement-based materials, focusing on preparation processes and performance enhancements. The advantages and necessity of using nanomaterials are highlighted by clarifying the effects of nanomodified microcapsules on the performances of coatings and cement-based materials. In addition, the bottlenecks in the application of nanomodified microcapsules to coatings and cement-based materials are comprehensively examined, and the challen... [more]

Liquid nitrogen (LN2) fracturing is a potential stimulation method in unconventional hydrocarbon recovery, showing its merits in being water free, creating low formation damage and being environmentally friendly. The microstructure evolution of rocks subjected to LN2 cooling is a fundamental concern for the engineering application of LN2 fracturing. In this paper, pore-scale imaging and characterization were performed on two rocks, i.e., tight sandstone and coal specimens subjected to LN2 cooling using computed tomography scanning. The digital core technique was employed to reconstruct the microstructures of rocks and give a quantitative analysis of the pore structure evolution of both dry and water-saturated rocks. The results indicate that LN2 cooling has a great effect on the pores’ morphology and their spatial distribution, leading to a great improvement in pore diameter and aspect ratio. When compared to the sandstone, coal is more sensitive to LN2 cooling and thermal stresses, ha... [more]

The aim of this study was to optimize parameters of microwave-assisted extraction (MAE) and accelerated solvent extraction (ASE) in terms of extraction temperature and time, microwave power and cycle numbers on the phenolic content of sea buckthorn leaves and berries, using 70% ethanol (v/v) as an extraction solvent. The characterization of phenolic composition in leaf and berry extracts obtained at optimal MAE and ASE conditions was performed with UPLC/ESI-MS2, while antioxidant activity was determined using the ORAC method. The optimal extraction conditions for MAE were 60 °C, 500 W and 15 min for leaves and 60 °C, 300 W, and 10 min for berries. The optimal extraction conditions for ASE from both leaves and berries were 120 °C, 15 min, and 3 cycles. Total phenolic content (TPC) in MAE and ASE extracts from leaves was similar to the TPC determined in extracts obtained by conventional extraction (60 °C/30 min); however, ASE contributed to the higher TPC of the berry extracts. The flavo... [more]

Superhydrophobic surfaces find extensive applications in various fields, including self-cleaning, liquid manipulation, anti-icing, and water harvesting. To achieve superhydrophobicity, the surfaces are designed with hierarchical nano- and/or microscale protrusions. These structures result in a static contact angle above 150° and a sliding/rolling-off angle below 10° when water droplets deposit on the surface. The combination of hierarchical structures and low-surface energy materials contributes to this unique liquid-repellent property. In addition to liquid repellency, the durability of these surfaces is crucial for practical applications, which has prompted the exploration of stretchable superhydrophobic surfaces as a viable solution. The flexibility of these surfaces means that they are effectively safeguarded against mechanical damage and can withstand daily wear and tear. Over the last decade, considerable research has been dedicated to developing stretchable superhydrophobic surf... [more]

The bottomhole pressure is one of the key parameters for oilfield development and decision-making. However, due to factors such as cost and equipment failure, bottomhole pressure data is often lacking. In this paper, we established a GA-XGBoost model to predict the bottomhole pressure in carbonate reservoirs. Firstly, a total of 413 datasets, including daily oil production, daily water production, daily gas production, daily liquid production, daily gas injection rate, gas−oil ratio, and bottomhole pressure, were collected from 14 wells through numerical simulation. The production data were then subjected to standardized preprocessing and dimensionality reduction using a principal component analysis. The data were then split into training, testing, and validation sets with a ratio of 7:2:1. A prediction model for the bottomhole pressure in carbonate reservoirs based on XGBoost was developed. The model parameters were optimized using a genetic algorithm, and the average adjusted R-squar... [more]

The thermal storage performance of shell and tube phase change heat storage units is greatly influenced by the thermophysical parameters of the phase change material (PCM). Therefore, we use numerical simulations to examine how the thermal storage capability of shell and tube phase change heat storage units is affected by thermophysical parameters such as specific heat capacity, thermal conductivity, and latent heat of phase change. The findings indicate that while the rate of temperature increase and the rate of the PCM melting both slow down as specific heat capacity increases, the overall heat storage increases. Within the specified range of parameters, the average rate of heat storage increases by approximately 4% for every 50% increase in specific heat capacity. The PCM’s rate of temperature rise slows down and its overall heat storage capacity rises throughout the middle stage of the phase change heat storage process as the latent heat of phase change grows. The average heat stor... [more]

Optimizing the structure of micromixers to improve the mixing efficiency is of great significance for chemical engineering and biology fields. In this study, an optimization of the microchannel in two liquids mixing is carried out based on computational fluid dynamics (CFD) and response surface methodology. Firstly, CFD simulations were performed to investigate the mixing flow field and mixing efficiency in the microchannel by considering different process and structure parameters (e.g., feed pressure p, microchannel width w). The response surface methodology was adopted to construct a fitting surface by CFD discrete working conditions. Then, an optimized microchannel width w was searched using the parallel particle swarm optimization (PPSO) algorithm from the response surface. Lastly, the searched optimum was validated by CFD simulation again, and the final result showed that the predicted mixing efficiency from the response surface model is well confirmed by CFD simulation. On averag... [more]

Previous studies have mainly focused on the source rocks of the 7th Member of Yanchang Formation (Chang 7 Member) in the Ordos Basin, with very few studies focusing on the extracts from the source rocks. These extracts have important guiding significance for studying the in situ conversion process of shale oil. Taking the shale source rock of the Chang 7 Member as an example, this paper selected the extract of shale source rock (i.e., retained oil), which has been less studied previously, as the sample to carry out the hydrocarbon-generating pyrolysis simulation experiment of a semi-open−semi-closed system. Seven groups of parallel simulation experiments were designed with a pressure of 20 MPa. The generated oil and gas were collected and quantified, and their geochemical characteristics were researched. In addition, the generated oil and gas were investigated from aspects of cumulative yield and net increased yield, and the chromatographic and mass spectral characteristics of the gene... [more]

In underground coal gasification, as a choke regulating the formation gas lift pressure, the throttling tool can effectively reduce the production cost, the number of ground heating and insertion equipment, and gas consumption. Because in this process, the coal is transformed into composite synthetic gas through a series of technical treatments, the throttling tool is in a working environment with high temperature and pressure. In the process of transportation of combined synthetic gas, the pulverized coal parts produced by incomplete coal combination move with the gas in the throttling tool. The high temperature and high-pressure gas carrying large-diameter pressed coal parts will cause serial erosion and wear to the throttling device, resulting in failure and well-controlled safety risks. Therefore, according to the Joule−Thomson effect, this paper independently designs downhole throttling tools with single- and double-hole structures. According to actual field conditions, the erosio... [more]

Self-assembly of nanoscale objects is of essential importance in materials science, condensed matter physics, and biophysics. Curvature modifies the principles and sequence of self-assembly in Euclidean space, resulting in unique and more complex structures. Understanding self-assembly behavior in curved space is not only instrumental for designing structural building blocks and assembly processes from a bottom-up perspective but is also critically important for delineating various biological systems. In this review, we summarize efforts made to unveil the physical nature of self-assembly in curved space through experiments and simulations. First, we outline the differences in the physical nature of self-assembly between curved space and Euclidean space by presenting relevant results of experiments and simulations. Second, we explore the principles of self-assembly in curved space at multiple scales and interactions, elucidating important factors that govern the self-assembly process f... [more]

Effective fluid-loss control in oil wells is a critical concern for the oil industry, particularly given the substantial reserves situated in carbonate reservoirs globally. The prevalence of such reservoirs is expected to rise with the slow depletion of hydrocarbons, intensifying the need to address challenges related to deteriorating reservoir properties post well-killing operations. This deterioration results in significant annual losses in hydrocarbon production at major oil enterprises, impacting key performance indicators. To tackle this issue, this study focuses on enhancing well-killing technology efficiency in carbonate reservoirs with abnormally low formation pressures. To address this issue, the authors propose the development of new blocking compositions that prevent the fluid loss of treatment fluids by the productive reservoir. The research tasks include a comprehensive analysis of global experience in well-killing technology; the development of blocking compositions; an i... [more]

Traditional research on apparent permeability in shale reservoirs has mainly focussed on effects such as poromechanics and porosity-assisted adsorption layers. However, for a more realistic representation of field conditions, a comprehensive multi-scale and multi-flowing mechanism model, considering the fracturing process, has not been thoroughly explored. To address this research gap, this study introduces an innovative workflow for dynamic permeability assessment. Initially, an accurate description of the pore size distribution (PSD) within three major mineral types in shale is developed using focussed ion beam-scanning electron microscopy (FIB-SEM) and nuclear magnetic resonance (NMR) data. Subsequently, an apparent permeability model is established by combining the PSD data, leading to the derivation of dynamic permeability. Finally, the PSD-related dynamic permeability model is refined by incorporating the effects of imbibition resulting from the fracturing process preceding shale... [more]

Egypt faces significant challenges in managing its sewage sludge generated in large quantities from wastewater treatment plants. This study investigates the feasibility of utilizing sewage sludge as a renewable resource for hydrogen production through anaerobic digestion at the 100 L bioreactor level. Hydrogen is considered a promising alternative energy source due to its high energy content and environmental benefits. To optimize the microbial degradation process and maximize hydrogen production from sewage sludge, a specialized pretreatment is necessary. Various pretreatment methods have been applied to the sewage sludge, individually and in combination, to study the bio-hydrogen production from sewage sludge. The four methods of treatment were studied in batch assays as a pilot scale. Thermal pretreatment of sewage sludge significantly increases bio-hydrogen production yield compared to other sewage sludge pretreatment methods, producing the highest H2 yield (6.48 LH2/g VS). In gene... [more]

Shale oil resources, noted for their broad distribution and significant reserves, are increasingly recognized as vital supplements to traditional oil resources. In response to the high fracturing costs and swift decline in productivity associated with shale oil horizontal wells, this research introduces a novel approach utilizing CO2 for enhanced shale oil recovery in radial boreholes. A compositional numerical simulation method is built accounted for component diffusion, adsorption, and non-Darcy flow, to explore the viability of this technique. The study examines how different factors—such as initial reservoir pressure, permeability, numbers of radial boreholes, and their branching patterns—influence oil production and CO2 storage. Our principal conclusions indicate that with a constant CO2 injection rate, lower initial reservoir pressures predominantly lead to immiscible oil displacement, hastening the occurrence of CO2 gas channeling. Therefore, maintaining higher initial or inject... [more]

Impurities in the CO2 stream should be removed to prevent eventual phase changes in CO2 transportation because a two-phase flow caused by the phase change in the pipeline necessitates additional overpressure and can induce equipment damage. In this study, CO2 compression and liquefaction (CCL) processes with a distillation column were used to remove non-condensable impurities and were compared with those with a flash. Three different feeds with a flow rate of 50.1 t/h (400,500 t/y) were supplied to the CCL processes and compressed to 65 bar to gauge pressure (barg) and 20 °C. Although the CO2 mixtures obtained through dehydration and flashing met the purity requirements for transportation and storage recommended in literature, the flash-separated CO2 product at 65 barg demonstrated the coexistence of gas and liquid phases, which restricted the temperature window for liquid CO2 transportation. When the distillation column was used instead of the flash, the operating temperature window a... [more]