Selection and assessment of mining equipment used in open pit rock mines relies chiefly on estimates of overall exploitation cost. The rational arrangement of mining equipment and systems comprising loading machines, haul trucks and crushing plants should be preceded by a thorough analysis of technical and economic aspects, such as investment outlays and the costs of further exploitation, which largely determine the costs of mining operations and the deposit value. Additionally, the operational parameters of the mining equipment ought to be considered. In this study, a universal set of evaluation criteria has been developed, and an evaluation method has been applied for the selection of surface mining equipment and the processing system to be operated in specific mining conditions, defined by the user. The objective of this study is to develop and apply the new methodology of multi-criteria selection of open pit rock mining equipment based on multiple criteria decision-making (MCDM) pr... [more]

The share of renewable and distributed energy resources (DERs), like wind turbines, solar photovoltaics and grid-connected batteries, interconnected to the electric grid is rapidly increasing due to reduced costs, rising efficiency, and regulatory requirements aimed at incentivizing a lower-carbon electricity system. These distributed energy resources differ from traditional generation in many ways including the use of many smaller devices connected primarily (but not exclusively) to the distribution network, rather than few larger devices connected to the transmission network. DERs being installed today often include modern communication hardware like cellular modems and WiFi connectivity and, in addition, the inverters used to connect these resources to the grid are gaining increasingly complex capabilities, like providing voltage and frequency support or supporting microgrids. To perform these new functions safely, communications to the device and more complex controls are required.... [more]

This study addresses the problem of geological structure tightness for the purposes of enhanced oil recovery with CO2 sequestration. For the first time in the history of Polish geological survey the advanced methods, practical assumptions, and quantitative results of detailed simulations were applied to study the geological structure of a domestic oil reservoir as a potential candidate for a combined enhanced oil recovery and CO2 sequestration project. An analysis of the structure sequestration capacity and its tightness was performed using numerical methods that combined geomechanical and reservoir fluid flow modelling with a standard two-way coupling procedure. By applying the correlation between the geomechanical state and transport properties of the caprock, threshold pressure variations were determined to be a key factor affecting the sealing properties of the reservoir−caprock boundary. In addition to the estimation of the sequestration capacity of the structure, the process of C... [more]

The energy consumption and emissions in the urban transportation are influenced not only by technical efficiency in the mobility operations but also by the citizens’ mobility behaviors including mode choices and modal shift among sustainable and unsustainable mobility modes. Information and Communication Technologies (ICTs) can play an important role in the mobility behaviors of citizens, and it is necessary to study whether ICTs support sustainable mode choices like public transport and nonmotorized modes, which increase the total energy efficiency in the urban mobility and reduce traffic congestion and related emissions. This paper focuses on the two most popular ICT services in the urban transport, which are ATIS (Advanced Traveler Information Systems), and ridesourcing services. This study used the New York Citywide Mobility Survey (CMS) findings with a sample of 3346 participants. The associations between using these two ICT services and the mobility behaviors (mode choice with AT... [more]

Extensive studies are conducted to investigate the potential and techno-economic feasibility of bioenergy routes in different countries. However, limited researches have been focused on the whole national agricultural bioenergy resources in Egypt. This research provides an assessment of the potential agricultural biomass resources for electric energy production in Egypt. It provides a strategic perspective for the design of a national network of biomass power plants to utilize the spatially available agricultural residues throughout a country. A comprehensive approach is presented and is applied to Egypt. First, the approach estimates the amount, type, and characteristics of the agricultural residues in each Egyptian governorate. Then, a techno-economic appraisal for locating a set of collection stations, and installing a direct combustion biomass power plant in each governorate is conducted. SAM simulation software is used for the technical and economic appraisals, and preliminary pla... [more]

Boiling, as the most efficient type of convective heat transfer, is an area of interest in many fields of industry and science. Many works have focused on improving the heat transfer efficiency of boiling by altering the physical and chemical properties of surfaces by using different technological processes in their fabrication. This paper presents experimental investigations into pool boiling on enhanced surfaces with open microchannels. The material of the fabricated surface was copper. Parallel microchannels made by machining were about 0.2, 0.3, and 0.4 mm wide, 0.2 to 0.5 mm deep, and spaced with a pitch equal to twice the width of the microchannel. The experiments were carried out in water at atmospheric pressure. The experimental results obtained showed an increase in the heat flux and the heat transfer coefficient for surfaces with microchannels. The maximum (critical) heat flux was 2188 kW/m2, and the heat transfer coefficient was 392 kW/m2K. An improvement in the maximum heat... [more]

China has experienced rapid social and economic development in the past 40 years. However, excessive consumption of fossil fuel energy has caused an energy shortage and led to severe environmental pollution. To achieve sustainable development, China is striving to transform its growth mode. Adopting renewable energy (RE) including solar photovoltaic (PV) power is an effective measure. How to promote the further development of solar PV power under the scenario of China’s aspirational target of carbon peak by 2030 and 20% RE ratio in the energy mix remains a theme that need to be addressed. This paper analyzes the potential opportunities and challenges confronting solar PV power in China. The analysis covers the dimensions of political, economic, social, and technological (PEST). The results revealed a significant prospect for the further deployment of solar PV power in the coming decades. The aggressive estimated installed capacity of solar PV power is expected to reach 80+ GW annually.... [more]

Energy storage systems (ESS) are becoming essential as a solution for troublesome industrial systems. This study focuses on the application of a type of ESS, a high-power technology known in the literature as supercapacitors or electric double layer capacitors (EDLC). This technology has had a huge impact during the last decade on research related to the electric traction drives, renewable sources and powergrids. Related to this aspect, this paper summarizes the most relevant scientific publications in the last five years that study the use of supercapacitor technology (SCs) in electric traction applications (drives for rail vehicles and drives for road vehicles), generation systems for renewable energy (wind, solar and wave energy), and connection systems to the electric grid (voltage and frequency regulation and microgrids). The technology based on EDLC and the practical aspects that must be taken into account in the op-eration of these systems in industrial applications are briefly... [more]

As the integration of large-scale wind energy is increasing into the electricity grids, the role of wind energy suppliers should be investigated as a price-maker as their participation would influence the locational marginal price (LMP) of electricity. The existing bidding strategies for a wind energy supplier faces limitations with respect to the potential cooperation, other competitors’ bidding behavior, network loss, and uncertainty of wind production (WP) and balancing market price (BMP). Hence, to solve these problems, a novel bidding strategy (BS) for a wind power supplier as a price-maker has been proposed in this paper. The new algorithm, called the evolutionary game approach (EGA) inspired hybrid particle swarm optimization and improved firefly algorithm (HPSOIFA), has been proposed to handle the bidding issue. The bidding behavior of power suppliers, including conventional power suppliers, has been encoded as one species to obtain the equilibrium where the EGA can explore dyn... [more]

The installation of wind energy increased in the last twenty years, as its cost decreased, and it contributes to reducing GHG emissions. A race toward gigantism characterizes wind turbine development, primarily driven by offshore projects. The larger wind turbines are facing higher loads, and the imperatives of mass reduction make them more flexible. Size increase of wind turbines results in higher structural vibrations that reduce the lifetime of the components (blades, main shaft, bearings, generator, gearbox, etc.) and might lead to failure or destruction. This paper aims to present in detail the problems associated with wind turbine vibration and a thorough literature review of the different mitigation solutions. We explore the advantages, drawbacks, and challenges of the existing vibration control systems for wind turbines. These systems belong to six main categories, according to the physical principles used and how they operate to mitigate the vibrations. This paper offers a mul... [more]

A biorefinery integrated process based on lignocellulosic feedstock is especially interesting in rural areas with a high density of agricultural and agro-industrial wastes, which is the case for olive crop areas and their associated industries. In the region of Andalusia, in the south of Spain, the provinces of Jaén, Córdoba and Seville accumulate more than 70% of the olive wastes generated in Spain. Therefore, the valorisation of these wastes is a matter of interest from both an environmental and a social point of view. The olive biorefinery involves a multi-product process from different raw materials: olive leaves, exhausted olive pomace, olive stones and olive tree pruning residues. Biorefinery processes associated with these wastes would allow their valorisation to produce bioenergy and high value-added renewable products. In this work, using geographic information system tools, the biomass from olive crop fields, mills and olive pomace-extracting industries, where these wastes ar... [more]

Segmentation of images from scanning electron microscope, especially multiphase, poses a drawback in their microstructure quantification process. The labeling process must be automatized due to the time consumption and irreproducibility of the manual labeling procedure. Here we show a swarm intelligence-driven filtration methodology performed on raw solid oxide fuel cell anode’s material images to improve the segmentation methods’ performance. The methodology focused on two significant parts of the segmentation process, which are filtering and labeling. During the first one, the images underwent filtering by applying a series of filters, whose operation parameters were determined using Particle Swarm Optimization upon a dedicated cost function. Next, Seeded Region Growing, k-Means Clustering, Multithresholding, and Simple Linear Iterative Clustering Superpixel algorithms were utilized to label the filtered images’ regions into consecutive phases in the microstructure. The improvement w... [more]

In this paper, a design driven comparison between two 190 kVA industrial three-phase two-level voltage source converter (2L-VSC) designs based in silicon carbide (SiC) and silicon (Si) for 690 V grids is presented. These two designs were conceived to have the same nominal power, while switching at reasonable switching speeds and requiring the same case to ambient thermal impedance. Under these conditions, the designs were studied to detect the potential gains and limitations that a pragmatic converter design could feature when using these two technologies regarding cost, efficiency, size and weight. To achieve this, experimentally determined semiconductor characteristics were used to perform simulations, the results of which were then used to design the essential parts of the converter. These designed parts were then corroborated with manufacturers, from which physical characteristics of all designed components were obtained. The results show that the SiC based design presents substant... [more]

Organic-rich lacustrine shales in the Upper Triassic Yanchang Formation with thermal maturity mainly in the oil window are the main shale oil and shale gas system in the lacustrine strata of the Ordos Basin, China. Pore systems are important for the storage and transfer of shale oil and gas. The main objectives of this study are to identify the pore types and pore structures and investigate the controlling factors for pore types, pore structures, and total porosities of the lacustrine Yanchang Shale. In this study, organic-rich mudstones, mudstones with siltstone interlayers, siltstone, and sandstones were selected from 15 wells in the southern Ordos Basin. X-ray diffraction, pyrolysis, scanning electron microscopy (SEM), low-pressure nitrogen adsorption analysis, and helium porosimetry were conducted to investigate the mineral compositions, pore types, pore structures, porosities, and controlling factors. Siltstone and sandstone interlayers heterogeneously developed in the Yanchang Sh... [more]

The article presents a new method of automatic detection of subsidence troughs caused by underground coal mining. Land subsidence that results from mining leads to considerable damage to subsurface and surface infrastructure such as walls of buildings, road surfaces, and water relations in built-up areas. Within next 30 years, all coal mines are to be closed as part of the transformation of the mining industry in Poland. However, this is not going to solve the problem of subsidence in those areas. Thus, it is necessary to detect and constantly monitor such hazards. One of the techniques used for that purpose is DInSAR (differential interferometry synthetic aperture radar). It makes it possible to monitor land deformation over large areas with high accuracy and very good spatial and temporal resolution. Subsidence, particularly related to mining, usually manifests itself in interferograms in the form of elliptical interferometric fringes. An important issue here is partial or full autom... [more]

Work was carried out to diagnose irregularities in the operation of a vacuum-tube solar collector. Experimental investigations of the collector were carried out at the solar collector field test stand in the Laboratory of Solar Collectors at the Koszalin University of Technology. The scope of the work included the following: research on thermal efficiency characteristics, research on the temperature distribution on the solar collector manifold, and research on the geometric structure of the heat pipe and filling with the working medium. Based on the diagnostic tests carried out, the occurrence of incorrect sedimentation in the condenser on the neck of the heat pipe (44%) and an incorrect amount of working medium (66%) were found. The results show that the functioning of the heat pipe significantly depends on its geometric structure and the amount of working medium. Any irregularity at the production stage contributes to a reduction in the thermal efficiency of the solar collector. The... [more]

Increasing emissions from mining areas and a high global warming potential of methane have caused gas management to become a vital challenge. At the same time, it provides the opportunity to obtain economic benefits. In addition, the use of combined heat and power (CHP) in the case of coalbed methane combustion enables much more efficient use of this fuel. The article analyses the possibility of electricity production using gas engines fueled with methane captured from the Budryk coal mine in Poland. The basic issue concerning the energy production from coalbed methane is the continuity of supply, which is to ensure the required amount and concentration of the gas mixture for combustion. Hence, the reliability of supply for electricity production is of key importance. The analysis included the basic characterization of both the daily and annual methane capture by the mine’s methane drainage system, as well as the development of predictive models to determine electricity production base... [more]

Companies that belong to the energy sector can use Sustainable Development Goals (SDGs) for their strategies and diversify electrical energy production with reverence to the natural environment. This article aims to analyze sustainability strategy types among the Visegrád Group (V4) countries’ energy producers, who decided to generate electrical energy from the renewable resources. This research uses an inductive inference approach supported by a literature study and deductive reasoning supported by a statistical reference method. The main finding is that the energy producers from the V4 group have a common direction of evolution in their strategies. This change is based on a growing share of renewable energy sources to achieve environmental excellence strategies. The lack of renewable energy sector organizations’ strategies translates into disappointment with the goals pursued by these organizations. The significance of this study lies in an explanation of how sustainability strategie... [more]

This paper reports on the propagation of lightning overvoltage in a high-voltage direct current (HVDC) meshed grid. Since several topologies of meshed grids have been elaborated in the last decade, we used a common comprehensive reference test platform. The lightning impulse propagation was investigated with regard to the impact of surge arresters and the polarity of the lightning stroke concerning the DC line polarity (±500 kV). Various scenarios were considered, including a direct lightning strike to the DC+ conductor, to the tower, and to the shielding wire in the middle of the span, including backflash on the insulators. The influence of tower footing impedance on overvoltage levels at various nodes was assessed, depicting the critical value. A description of the models used in the simulations was provided. The main focus of the paper was on the wide-area propagation of the overvoltages in the meshed grid, at distant terminals and inside the feeders. An interesting observation was... [more]

In this paper we present an approach for real-time simulation and Hardware-in-the-Loop (HIL) testing of Modular Multilevel Converters (MMCs) that rely on switching models while supporting system level analysis. Using the Latency Based Linear Multistep Compound (LB-LMC) approach, we achieved a 50 ns simulation time step for systems composed of several MMC converters and for converters of various complexity. To facilitate system level testing, we introduce the use of a serial communication-based (Aurora) interface for HIL testing of MMC converters and we analyzed the effect that communication latency has on the accuracy of the HIL test. The simulation and HIL results are validated against an MMC laboratory prototype.

Carbon dioxide-based enhanced oil-recovery (CO2-EOR) processes have gained considerable interest among other EOR methods. In this paper, based on the molecular weight of paraffins (n-alkanes), pressure, and temperature, the magnitude of CO2−n-alkanes interfacial tension (IFT) was determined by utilizing soft computing and mathematical modeling approaches, namely: (i) radial basis function (RBF) neural network (optimized by genetic algorithm (GA), gravitational search algorithm (GSA), imperialist competitive algorithm (ICA), particle swarm optimization (PSO), and ant colony optimization (ACO)), (ii) multilayer perception (MLP) neural network (optimized by Levenberg-Marquardt (LM)), and (iii) group method of data handling (GMDH). To do so, a broad range of laboratory data consisting of 879 data points collected from the literature was employed to develop the models. The proposed RBF-ICA model, with an average absolute percent relative error (AAPRE) of 4.42%, led to the most reliable pred... [more]

Transportation data in a smart city environment is increasingly becoming available. This data availability allows building smart solutions that are viewed as meaningful by both city residents and city management authorities. Our research work was based on Lisbon mobility data available through the local municipality, where we integrated and cleaned different data sources and applied a CRISP-DM approach using Python. We focused on mobility problems and interdependence and cascading-effect solutions for the city of Lisbon. We developed data-driven approaches using artificial intelligence and visualization methods to understand traffic and accident problems, providing a big picture to competent authorities and supporting the city in being more prepared, adaptable, and responsive, and better able to recover from such events.

Waterflooding remains the most commonly used method to improve oil recovery. Although the injected brine type is mainly dependent on its availability, few of its characteristics can be controlled during project design. Published laboratory work indicates that the adjustment of injected brine composition can cause an increase in oil production by wettability alteration. This research objective is to propose a novel four-step framework for modeling improved oil recovery by Engineered Water Injection from laboratory to numerical simulation for carbonate formations. We use a geochemical-based model that estimates contact angles to predict wettability alteration. The steps are (1) screening criteria, (2) geochemical evaluation, (3) wettability alteration modeling, and (4) coreflood history-match. We validate our framework by conducting history-match simulations of Brazilian Pre-Salt corefloods. Incremental oil recovery factors are between 5 to 11%, consistent with those reported during expe... [more]

Faced promising development of autonomous vehicles, the concept Mobility as a Service embraces AVs. The autonomous delivery has also been arising and tested for last-mile solution. Accordingly, passenger transportation and delivery service are to be jointly coordinated in the future MaaS. The research niche is summarized as how to embed crowdsourced parcel delivery into MaaS based on AVs. Electricity powered vehicles are to be applied considering energy consumption and air emission. Research questions are identified as what this novel service is and how it works, especially focusing on task coordination and the related information management. The system engineering process-oriented approaches, matching theory, and numerical method have been applied. The service concept has been elaborated, which contains information system architecture model and functional model. The matching condition of this service is summarized. As the embedded delivery can partially share the demand of traditional... [more]

In comparison to lignocellulosic biomass, which is suitable for thermo-chemical valorization, the organic fraction of municipal solid waste (OFMSW) is mainly treated via composting or anaerobic digestion (AD). An efficient utilization of OFMSW is difficult due to variations in its composition. Based on the characteristics of OFMSW, hydrothermal treatment (HTT) experiments at temperatures < 200 °C as an alternative OFMSW-processing were evaluated in this study. The raw OFMSW was characterized with a dry matter (DM)-based organic dry matter (oDM) content of 77.88 ± 1.37 %DM and a higher heating value (HHV) of 15,417 ± 1258 J/gDM. Through HTT at 150, 170 and 185 °C, the oDM contents as well as H/C and O/C ratios were lowered while the HHV increased up to 16,716 ± 257 J/gDM. HTT led to improved fuel properties concerning ash melting, corrosion stress and emission behavior. Negative consequences of the HTT process were higher contents of ash in the biochar as well as accumulated heavy me... [more]