The length and pattern of air−fuel mixing plays a significant role in the uniformity, flame temperature, and emission characteristics, which can lead to a superior product quality in a non-oxidizing direct fired burner for a cold-rolled steel plate furnace. In this study, a diffusion-flame-type burner and partially-premixed-type burner were experimentally investigated to understand their effects on flame shape, flame temperature, and exhaust gas characteristics. With this aim, fuel nozzle size, nozzle hole number, fuel injection angle, and mixing distance of fuel and air were varied during the experiments. Computational fluid dynamics simulations were also performed to investigate the air−fuel mixing state for a nozzle-mixed burner and a partially-premixed burner. The results show that the flame temperature of the partially-premixed burner increases by up to 26 °C on average compared to that of the nozzle-mixed burner. It is also shown that the mixing distance plays an important role i... [more]

The deagglomeration of titanium-dioxide powder in water suspension performed in a stirring tank was investigated. Owing to the widespread applications of the deagglomeration process and titanium dioxide powder, new, more efficient devices and methods of predicting the process result are highly needed. A brief literature review of the application process, the device used, and process mechanism is presented herein. In the experiments, deagglomeration of the titanium dioxide suspension was performed. The change in particle size distribution in time was investigated for different impeller geometries and rotational speeds. The modification of impeller geometry allowed the improvement of the process of solid particle breakage. In the modelling part, numerical simulations of the chosen impeller geometries were performed using computational-fluid-dynamics (CFD) methods whereby the flow field, hydrodynamic stresses, and other useful parameters were calculated. Finally, based on the simulation r... [more]

Natural ventilation, combined with a passive cooling system, can provide significant energy savings in the refrigeration of indoor spaces. The performance of these systems is highly dependent on outdoor climatic conditions. The objective of this study was to analyse the feasibility of a passive, downdraught, evaporative cooling system driven by solar chimneys in different climatic zones by using an experimentally validated simulation tool. This tool combined a ventilation model and a thermal model of the dwelling in which an empirical model of a direct evaporative system made of plastic mesh was implemented. For experimental validation of the combined model, sensors were installed in the dwelling and calibrated in the laboratory. The combined model was applied to Spanish and European cities with different climates. In the simulation, values of cooling energy per volume of air ranging between 0.53 Wh/m3 and 0.79 Wh/m3 were obtained for Alicante (hot climate with moderate humidity) and M... [more]

In its “Sustainable and Smart Mobility Strategy”, the European Commission assumes a 90% reduction in traffic emissions by 2050. The decarbonisation of transport logistics as a major contributor to climate change is, therefore, indicated. There are major challenges in converting logistic transport processes to electric mobility. Currently, there is little available information for the conversion of entire fleets from fossil to electric fuel. One of the biggest challenges is the additional time needed for recharging. For the scheduling of entire logistics fleets, exact knowledge of the required loading times and loading quantities is essential. In this work, a parametrized continuous function is, therefore, defined to determine the essential parameters (recharging time, retrieved power, energy amounts) in HPC (high-power charging). These findings are particularly important for the deployment of multiple e-trucks in fleets, as logistics management depends on them. A simple function was co... [more]

This paper presents a new winding configuration theory of conventional and unconventional slot-pole combinations that can be used to configure windings with any slot-pole combination. First, various two-layer windings can be divided into conventional balanced winding (CBW), unbalanced winding (UBW), unconventional even slot winding (UESW) and unconventional odd slot winding (UOSW). In addition, the winding configuration can be divided into two steps—slot sorting and slot distributions to phases—and the rule of winding distribution and connection of the four kinds of windings is given. Moreover, there are four models established corresponding to the four kinds of windings. The air-gap flux density and harmonic of models with double layer flux-barrier PM-assisted rotor and without flux-barrier rotor are analyzed and compared using two-dimensional transient finite element analysis (FEA). The effect of stator magneto motive force (MMF) on torque performance affected by winding configuratio... [more]

Electric utility regulators and policy makers implement incentive-based regulation to improve electric utilities efficiency or to manage the cost of electricity. However, poorly implemented regulation may produce undesired results such as low reliability or poor quality of service. Moreover, the competition within the electricity sector is likely to be low because of the high barriers to entry, vertically integrated electric utilities, and high capital requirements. Therefore, benchmarking exercises allow policy makers and regulators to gauge the relative efficiency of electric utilities and help them to reward or penalize the electric utilities accordingly. In this study, we examined the variables that significantly influence the efficiency of electric utilities and developed an optimum method to measure the efficiency of the electric utilities. The results of the efficiency measurement were then used to rank the electric utilities. The result of this study indicates that there are 13... [more]

Electromagnetic interference (EMI) from renewable power systems to the grid attracts more attention especially in the low-frequency range, due to the low switching frequency of high-power inverters. It is significantly important to derive EMI models of power inverters as well as to develop strategies to suppress the related conducted emissions. In this work, black-box modelling is applied to a three-phase inverter system, by implementing an alternative procedure to identify the parameters describing the active part of the model. Besides, two limitations of black-box modelling are investigated. The first regards the need for the system to satisfy the linear and time-invariant (LTI) assumption. The influence of this assumption on prediction accuracy is analysed with reference to the zero, positive and negative sequence decomposition. It is showing that predictions for the positive/negative sequence are highly influenced by this assumption, unlike those for the zero sequence. The second l... [more]

The article discusses the use of pivot bearing friction liners, made of selected materials, in railway freight wagons’ spherical centre bowls. Comparative studies on the effect of suspension dynamics on the equivalent stresses in the liner material were carried out using the finite element method and multibody simulation. The results show the magnitude and location of the highest stresses in the liner with varying input loads, friction coefficients and interacting materials. The analysis is a basis for a simulation method for predicting the fatigue life of the suspension friction liner placed in the centre bowl between the bogie frame and the vehicle body.

Under marginal-cost pricing, some generators cannot recover their production costs at the market price due to non-convexities in the electricity market. For this reason, most electricity markets pay side-payments to generators whose costs are not sufficiently recovered, but side-payments present the problem of deteriorating transparency in the market. Recently, convex hull pricing and extended locational marginal pricing have been reviewed or gradually introduced to reduce side-payments. Another method is to include non-convex costs in the market price, which is applied in the Korean electricity market. Although it is not generally considered in the electricity market, the Vickrey auction method is also one of the pricing mechanisms that can reduce side-payments. The main purpose of this study is to analyze the financial impact of these alternative pricing mechanisms on market participants through rigorous simulation. We applied the alternative pricing schemes to the Korean electricity... [more]

In large substations, many lightning rods are installed on multi-grounded frames. The lightning rods, the frame, the grounding grid and the soil form a whole body, and the lightning current will be discharged from many grounding points. In this paper, based on the partial element equivalent circuit method, a numerical model, in the time domain, is developed to simulate the lightning-caused electromagnetic transients on the frame and the grounding grid. The model is verified by field testing and by comparison with commercial software. The model has several features: (1) it has a simple time domain form; (2) it is stable due to a staggered arrangement of space and time variables and an implicit difference scheme used, and (3) the dimension of the equations is relatively small because the unknown variables are divided into several groups, which are calculated one by one. With this method, the transient characteristics of the grounding grid with lightning rods on the frame are calculated,... [more]

In this work, simulations were performed to optimize the parameters of a lead-free perovskite/silicon tandem solar cell for the improved efficiency and stability of commercial devices. The top sub-cell is based on a lead-free perovskite with a large bandgap of 1.8 eV, an electron transport layer of SnO2/PCBM, which is known for its anti-hysteresis effect, and a hole transport layer of NiO to improve stability, whereas the bottom sub-cell is based on n-type silicon to increase the efficiency of the whole cell. First, the two sub-cells were simulated under standalone conditions for calibration purposes. Then, the current matching condition was obtained by optimizing the thicknesses of the absorber layers of both sub-cells and the doping concentration of the back surface field (BSF) layer of the silicon sub-cell. As a result of this optimization phase, thicknesses of 380 nm and 20 µm for the top and bottom sub-cells, respectively, and a doping concentration of 1022 cm−3 were used in the c... [more]

Currently, difficulties such as the depletion of fossil fuel resources and the associated environmental pollution have driven the rise of other energy systems based on green energy sources. In this research, modeling and a viability study of grid-connected and islanded photovoltaic (PV) power systems for supplying the residential load in Mekelle City, Ethiopia, were carried out considering the country’s emerging utility tariff plan for 2021 and beyond. The technical viability of the proposed supply option was analyzed using PVGIS, PVWatts and HOMER Pro tool, while the economic and environmental optimization aspects were carried out using HOMER Pro. Sensitivity analyses and output comparisons among the three renewable energy simulation tools are presented. The results showed that under the consideration of an incremental electricity tariff plan (up to 2021), the analyzed cost of energy of the grid/PV system is around 12% lower than the utility grid tariff. Moreover, we also found that b... [more]

Retrofitting heritage buildings for energy efficiency is not always easy where cultural values are highly concerned, which requires an integrated approach. This paper aims to assess the potential of applying passive retrofitting scenarios to enhance indoor thermal comfort of heritage buildings in North Africa, as a hot climate, a little attention has been paid to retrofit built heritage in that climate. A mixed-mode ventilation residential building in Cairo, Egypt, was selected as a case study. The study combines field measurements and observations with energy simulations. A simulation model was created and calibrated on the basis of monitored data in the reference building, and the thermal comfort range was evaluated. Sets of passive retrofitting scenarios were proposed. The results (based on the ASHRAE-55-2020 adaptive comfort model at 90% acceptability limits) showed that the annual thermal comfort in the reference building is very low, i.e., 31.4%. The application of hybrid passive... [more]

Previous studies have demonstrated that non-parametric hedging models using temperature derivatives are highly effective in hedging profit/loss fluctuation risks for electric utilities. Aiming for the practical applications of these methods, this study performs extensive empirical analyses and makes methodological customizations. First, we consider three types of electric utilities being exposed to risks of “demand”, “price”, and their “product (multiplication)”, and examine the design of an appropriate derivative for each utility. Our empirical results show that non-parametrically priced derivatives can maximize the hedge effect when a hedger bears a “price risk” with high nonlinearity to temperature. In contrast, standard derivatives are more useful for utilities with only “demand risk” in having a comparable hedge effect and in being liquidly traded. In addition, the squared prediction error derivative on temperature has a significant hedge effect on both price and product risks as... [more]

Energy transactions in liberalized markets are subject to price and quantity uncertainty. This paper considers the spot price and energy generation to follow a bivariate semi-nonparametric distribution defined in terms of the Gram−Charlier expansion. This distribution allows us to jointly model not only mean, variance, and correlation but also skewness, kurtosis, and higher-order moments. Based on this model, we propose a static hedging strategy for electricity generators that participate in a competitive market where hedging is carried out through forward contracts that include a risk premium in their valuation. For this purpose, we use Monte Carlo simulation and consider information from the Colombian electricity market as the case study. The results show that the volume of energy to be sold under long-term contracts depends on each electricity generator and the risk assessment made by the market in the forward risk premium. The conditions of skewness, kurtosis, and correlation, as w... [more]

The use of solar energy for power generation using the innovative solar chimney concept has been explored by many researchers mostly with the help of analytical models as well as CFD simulations while experimental studies for a pilot and bench scale facilities have been carried out. The efficiencies of these chimneys, however, are less than 1% (~0.07% for 50 kW pilot plant similar to Manzanares plant in Spain). In the present study, an effort has been made to make modifications in the chimney design to improve the efficiency of the chimney in terms of power generation. CFD simulations have been carried out for this modified design and the efficiency is seen to improve to 0.12% for a 50 kW chimney. Furthermore, a techno-economic feasibility analysis has been carried out for a conventional 5 MW solar power plant which can be installed on the western part of India, which receives good solar irradiation throughout the year. Two cases with and without government subsidies have been consider... [more]

Counteracting emissions of particulate matter (PM) is an increasingly important goal in sustainable biomass combustion. This work includes a novel approach to investigate the PM emissions, originating from residual biomass combustion, at different combustion conditions in a lab-scale grate-fired furnace and includes in situ PM measurements by using on-line sensors. The interior furnace design allows installation of baffles to suppress the emissions by controlling the residence time. Moreover, the two-thermocouple method is used to measure the true gas temperature, and an on-line spatially resolved PM measurement method is developed to study the evolution of the PM concentration throughout the furnace for different experimental conditions thereby allowing accurate in-situ measurement of the PM reactivity. Experimental results and computational fluid dynamics (CFD) analyses are utilized in the current work to develop a kinetic model for reduction of particulate matter emissions in biomas... [more]

Support vector data description (SVDD) has been widely applied to batch process fault detection. However, it often performs poorly, especially when incipient faults occur, because it only considers the shallow data feature and omits the probabilistic information of features. In order to provide better monitoring performance on incipient faults in batch processes, an improved SVDD method, called deep probabilistic SVDD (DPSVDD), is proposed in this work by integrating the convolutional autoencoder and the probability-related monitoring indices. For mining the hidden data features effectively, a deep convolutional features extraction network is designed by a convolutional autoencoder, where the encoder outputs and the reconstruction errors are used as the monitor features. Furthermore, the probability distribution changes of these features are evaluated by the Kullback-Leibler (KL) divergence so that the probability-related monitoring indices are developed for indicating the process stat... [more]

The current research work describes the flow and thermal analysis inside the circular flow region of an annular heat pipe with a working fluid, using computational fluid dynamics (CFD) simulation. A two-phase flow involving simultaneous evaporation and condensation phenomena in a concentric annular heat pipe (CAHP) is modeled. To simulate the interaction between these phases, the volume of fluid (VOF) technique is used. The temperature profile predicted using computational fluid dynamics (CFD) in the CAHP was compared with previously obtained experimental results. Two-dimensional and three-dimensional simulations were carried out, in order to verify the usefulness of 3D modeling. Our goal was to compute the flow characteristics, temperature distribution, and velocity field inside the CAHP. Depending on the shape of the annular heat pipe, the thermal performance can be improved through the optimal design of components, such as the inner width of the annular heat pipe, the location of th... [more]

The membrane-based desiccant liquid air dehumidification system is a promising technology for efficient humidity control in buildings. The use of a membrane module allows, among other things, for a compact design with a relatively large heat and mass transfer area and eliminates carryover of solution droplets. In this paper, a cross-flow, hollow-fiber membrane module was proposed for air dehumidification and regeneration of lithium chloride. A two-dimensional heat and mass transfer model for cross-flow in a membrane module used for air dehumidification and liquid desiccant regeneration was developed. The effectiveness, moisture removal rate and moisture removal rate were studied numerically and validated against experimental results. Based on the numerical simulations, the most favorable ranges of operating conditions were determined. It was found that the operating conditions significantly impact the dehumidification performance. The proposed dehumidifier maintains its performance in... [more]

Several methods for appropriate control of the hygrothermal environment in museums to prevent the deterioration of cultural artifacts were presented in previous studies. However, few detailed hygrothermal simulation models have been used considering the hygrothermal performance of building components and airflow through gaps. Furthermore, hygrothermal properties of a type of storage facility with buffer spaces prevailing in Japan have not been quantitatively evaluated. The objectives of this study were to develop a detailed numerical model of a museum storage room with buffer spaces exhibiting high humidity during summer and to quantitatively evaluate the potential factors causing it; the inflow of humid outdoor air and indirect cooling caused by the air-conditioning system of a surrounding room. We analyzed the simulated temperature and humidity for various cases in which each influencing factor was suppressed. The humidity was reduced when the exhaust fan for the surrounding rooms wa... [more]

The number of buildings renovated following the introduction of European energy-efficiency policy represents a small number of buildings in Spain. So, the main Spanish building stock needs an urgent energy renovation. Using passive strategies is essential, and thermal characterization and predictive tests of the energy-efficiency improvements achieving acceptable levels of comfort for their users are urgently necessary. This study analyzes the energy performance and thermal comfort of the users in a typical Mediterranean dwelling house. A transient simulation has been used to acquire the scope of Spanish standards for its energy rehabilitation, taking into account standard comfort conditions. The work is based on thermal monitoring of the building and a numerical validated model developed in TRNSYS. Energy demands for different models have been calculated considering different passive constructive measures combined with real wind site conditions and the behavior of users related to nat... [more]

Reducing building energy consumption is a significant challenge and is one of the most important research areas worldwide. Insulation will help to keep the building’s desired temperature by reducing the heat flow. Additionally, proper insulation can provide an extended period of comfort, leading to reduced building energy requirements. Encapsulated air is the major aspect of most thermal insulation materials. Low thermal conductivity is a good characteristic of thermal insulation materials. Aerogel has low thermal conductivity, so it is suitable for glazing and insulation purposes. This research paper investigates the effectiveness of aerogel as an insulation material in buildings by incorporating a translucent aerogel-glazing system in the window and aerogel insulation in the wall of a building. Experimental investigation of a 10 mm thick aerogel blanket surrounded box was conducted to assess its performance. Additionally, a CFD simulation was conducted, and the results of temperature... [more]

The combined cycle power plants are the most recognized thermal power plants for their high efficiency, fast start-up capability, and relatively low environmental impact. Moreover, their flexible unit dispatch supports the share of renewable energy, which contributes to carbon mitigation. The operational flexibility of Integrated Solar Combined Cycle (ISCC) power plants is a crucial factor for reliable grid stability. To evaluate the limitations and capabilities of ISCC power plants and their control structures, dynamic simulation is a feasible method. In this study, a sophisticated dynamic process model of the ISCC power plant in Kuraymat, Egypt, has been developed using APROS software. The model describes the plant with a high level of detail including the solar field, the heat recovery steam generator, and the control structures. The model was implemented structurally identical to the reference plant and tuned using the operational design data. Actual measurements were used as the b... [more]

The Archimedes screw turbine (AST) is the most sustainable mini-hydropower extraction method that offers number of economic, social, and environmental advantages. Nowadays, many researchers are interested in AST development as it is considered a new technology. Currently, a lot of researchers are conducting experimental testing of the screws, comparing their reliability with computational fluid dynamic (CFD) analyses. Almost all of them are lab-scale testing models that claiming an average 80% efficiency for low pitch angles. In the case of a real site with a small inclination angle, the length of the screw is large enough to cause severe problems, specially related to bending of the screw. Therefore, this research was conducted to analyze the CFD flow field in a real site-scale AST with the maximum possible inclination of 45 degrees. In addition, the design was done without the upper and lower reservoir as it was conceived as a run-of-river flow system. The simulated real scale AST re... [more]